Physical Sciences and Mathematics Commons^™

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

Spallation-neutron-sources, such as those under investigation for use in accelerator-driven transmutation systems, generate neutrons through the collision of high-energy protons, or charged hydrogen atoms, with heavy metal targets such as lead. As a result, these systems also tend to deposit a significant amount of hydrogen in the materials of the transmuter target and superstructure. This can result in accelerated corrosion and changes in the properties of the exposed materials. Of particular importance is a phenomenon called hydrogen embrittlement, in which materials lose their ductility (ability to deform under stress) and become brittle (more susceptible to fracture) after reacting with hydrogen. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Task V 4th Quarterly Report, Samir Moujaes

Transmutation Sciences Materials (TRP)

The project is moving on target with the newly realigned objective set for the Phase I. Through close communications with Dr. Li and Dr. Jinsuo Zhang from LANL a realignment of the simulation work has been recommended. The reason for that is the vendor of STAR-CD/CHEMKIN had not perfected yet the final coupling of the post processing of output for any potential surface chemistry reaction taking place on the inside pipe surface of the LBE loop. This is because the coupling of CHEMKIN and STAR-CD has been done fairly recently.

Our final effort has been to generate using an innovative …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

Many of the international efforts to develop transmutation technology, including the U.S., Russian, and European scientific communities, have determined that lead bismuth eutectic (LBE) is a potential material for use as a both a spallation target and a coolant. To exploit this potential, a more thorough understanding of the effect and rates of corrosion on steels, particularly non-Russian alloys, inside the LBE systems is required. Properly controlling the oxygen content in LBE systems has been observed to drastically reduce the corrosion of structural steels in LBE. However, the transport of oxygen and formation of corrosion products is not well understood; …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

Alloy EP-823 has been developed as a structural material for Lead Bismuth Eutectic (LBE) systems, such as those under development for nuclear transmutation systems, as well as other applications. However, very little data regarding the mechanical properties of this alloy exists in the open literature, particularly in the temperature regime of interest for transmutation systems. To address this need, the UNLV research team, in collaboration with researchers from Los Alamos National Laboratory, has developed a research program to evaluate tensile properties of Alloy EP-823 stainless steel at elevated temperatures, which is not being performed at any other facility to date. …

Neutron Multiplicity Measurements Of Target/Blanket Materials, Carter D. Hull, William H. Johnson

Transmutation Sciences Physics (TRP)

To begin developing the database necessary for the validation and benchmarking of the LAHET component of the MCNPX code suite, the UNLV research program has set forth the following objectives. First, the current MCNPX suite will be used to develop models of multi-element neutron detector systems. These models of the detector systems will be incorporated into the design of detailed models for the entire detector-target system. These models will first be used to help design the irradiation experiments, and then will be used to model the behavior of the system. Irradiation experiments corresponding to the detector-target system models will be …

Development Of Dose Conversion Coefficients For Radionuclides Produced In Spallation Neutron Sources, Phillip W. Patton, Mark Rudin

Transmutation Sciences Physics (TRP)

For the first year of this effort, the UNLV research team set out four objectives. First, the university and laboratory consortium had to be established. This consortium was tasked with helping to determine the methodology for determining the dose coefficients, and to ensure that the resulting DCs will be of use to the national programs developing accelerator-driven nuclear systems (such as the SNS or an accelerator-driven transmutation system) and to the health physics community as a whole. The second goal of this program was to determine a methodology and then prioritize the radionuclides so that the research effort would address …

Development Of Dose Coefficients For Radionulides Produced In Spallation Neutron Sources: Annual Report, Phillip W. Patton, Mark Rudin

Transmutation Sciences Physics (TRP)

The University of Nevada, Las Vegas (UNLV) Transmutation Research Program has been tasked to support U.S. Department of Energy (DOE) efforts to assess the health risks associated with the operation of each of their accelerator-driven nuclear facilities for both NEPA and PSAR development. Quantifying the radiological risks to workers will have to be addressed during the design and siting of each of these facilities. U.S. Environmental Protection Agency (EPA) Federal Guidance Report No. 11 “Limiting Values of Intake and Air Concentration and Dose Conversion Factors for Inhalation, Submersion, and Ingestion”, developed two derived guides, Annual Limit on Intake (ALI) and …

An Interdatabase Comparison Of Nuclear Decay And Structure Data Utilized In The Calculation Of Dose Coefficients For Radionuclides Produced In A Spallation Neutron Source, John P. Shanahan, K. Eckerman, A. Arndt, C. Gold, Phillip W. Patton, Mark Rudin, R. Brey, T. Gesell, V. Rusetski, S. Pagava

Transmutation Sciences Physics (TRP)

Internal and external dose coefficient values have been calculated for 14 anthropogenic radionuclides which are not currently presented in Federal Guidance Reports Nos. 11, 12, and 13 or Publications 68 and 72 of the International Commission on Radiological Protection. Internal dose coefficient values are reported for inhalation and ingestion of 1 μm and 5 μm AMAD particulates along with the f₁ values and absorption types for the adult worker. Internal dose coefficient values are also reported for inhalation and ingestion of 1 μm AMAD particulates as well as the f₁ values and absorption types for members of the …

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Denis Beller

Separations Campaign (TRP)

The remediation of nuclear waste created by conventional fission reactors will rely upon the separation of the waste products for further treatment. The UREX+ process now under review will involve the use of an aqueous chemical process to separate out depleted uranium resulting in a product containing minor actinides, fission products, cesium, strontium, technetium, and iodine. The radioactive decay of strontium and cesium produces roughly half of the thermal and gamma production in spent fuel and the relatively short halflife of isotopes of both of these elements requires storage for about 300 years before heat and radiation decreases to safe …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Pang Tao, Denis Beller

Separations Campaign (TRP)

The separation and partitioning of used commercial reactor fuel is a vital component of any reprocessing or transmutation strategy. To process the high actinide fuels required for a transmutation effort, the Chemical Technology Division (CMT) at Argonne National Laboratory (ANL) is developing a pyrochemical separations process. Currently, this work is being done via small experiments. While this is more than sufficient to develop the technologies required to process actinide-bearing fuels, it does not allow for the direct investigation of criticality concerns that would be present in larger systems. As the volume of waste to be treated increases, a higher probability …

Inside Unlv, Diane Russell, Richard Jensen, Andy Grossman, Kevin Force

Inside UNLV

No abstract provided.

A Dynamic Simulation Model Of Beach Sand Replenishment: A Case Study Of Santa Barbara, California, David Turbow, Steve Norwick, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Sediment deprivation from dam installments contributes to beach erosion yet the underlying physical and economic factors linking them together have traditionally been isolated during regional planning. In order to gain a better understanding of the behavior of a managed beach system, a dynamic simulation model was developed incorporating physical and monetary factors influencing the amount of available beach sand. The Santa Barbara littoral cell was chosen as a case study to evaluate the feasibility of beach preservation goals under scenarios in which annual sand replenishment funding, sand prices, or sediment recovery from behind dams were limiting factors to available beach …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The Transmutation Research Program requires the incorporation of non-fertile actinides into the fuel matrix for the transmuter blanket. One of three currently proposed candidate matrices for the transmuter blanket is a metallic alloy fuel matrix. Metallic fuels are an outstanding candidate for a transmutation fuel due to excellent irradiation performance and ease of fabrication. However, including a volatile constituent during fabrication of these fuel pins presents a challenge. High vapor pressure actinides, particularly americium, are susceptible to rapid vaporization and transport using traditional metal fuel casting processes. As a result, only a fraction of the desired charge is incorporated into …

Biological Reduction Of Perchlorate In Ion Exchange Regenerant Solutions Containing High Salinity And Ammonium Levels, Tina M. Gingras, Jacimaria R. Batista

Civil and Environmental Engineering and Construction Faculty Research

The most promising technologies to remove perchlorate from water are ion exchange and biological reduction. Although successful, ion exchange only separates perchlorate from water; it does not eliminate it from the environment. The waste streams from these systems contain the caustic or saline regenerant solutions used in the process as well as high levels of perchlorate. Biological reduction could be used to treat the regenerant waste solutions from the ion exchange process. A treatment scheme, combining ion exchange and biodegradation, is proposed to completely remove perchlorate from the environment. Perchlorate-laden resins generate brines containing salt concentrations up to 6% or …

Exploring The Limits Of The Dipole Approximation With Angle-Resolved Electron Time-Of-Flight Spectrometry, Sierra Laidman, Monica Pangilinan, Renaud Guillemin, Sung Woo Yu, Gunnar Ohrwall, Dennis W. Lindle, Oliver Hemmers

Environmental Studies Faculty Publications

Understanding the electronic structure of atoms and molecules is fundamental in determining their basic properties as well as the interactions that occur with different particles such as light. One such interaction is single photoionization; a process in which a photon collides with an atom or molecule and an electron with a certain kinetic energy is emitted, leaving behind a residual ion. Theoretical models of electronic structures use the dipole approximation to simplify x-ray interactions by assuming that the electromagnetic field of the radiation, expressed as a Taylor-series expansion, can be simplified by using only the first term. It has been …

Mosquito Population Dynamics During The Establishment Phase Of A Constructed Desert Wetland, April Newman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Nature Preserve at the Clark County Wetlands Park is a constructed wetland that has the potential to produce new mosquito habitat. This thesis evaluates the potential for the development of a mosquito problem at the newly constructed wetland system by assessing the population dynamics of mosquitoes within the Nature Preserve. Based on data collected from May 2001 through January 2002, I describe fluctuations in mosquito genus and relative abundance during the first summer through winter period of wetland development.

University Of Nevada, Las Vegas Advanced Accelerator Applications University Participation Program: Quarterly Report, Third Quarter (September To November 2001), Anthony Hechanova

Transmutation Research Program Reports (TRP)

This Quarterly Report is a primary deliverable from the University of Nevada, Las Vegas (UNLV) Advanced Accelerator Applications (AAA) University Participation Program (UPP) Director to the U.S. Department of Energy (DOE) as described in the UNLV AAA proposal and Statement of Work for the Third Quarter.

The UNLV AAA UPP Director implements the program’s administration using staff from the Harry Reid Center for Environmental Studies (HRC) to ensure that work conducted under the UNLV AAA UPP meets program objectives. The UNLV AAA UPP consists of three components: Program Support, Research Infrastructure Augmentation, and Student Research.

Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project: Quaterly Report, William Culbreth

Reactor Campaign (TRP)

The national development of technology to transmute nuclear waste depends upon the generation of high energy neutrons produced by proton spallation. Proton accelerators, such as LANSCE at the Los Alamos National Laboratory, are capable of producing 800 MeV protons. By bombarding a lead/bismuth target, each proton may generate 500 or more neutrons that can activate fission products or induce the fission of transuranic isotopes.

The Monte Carlo radiation transport code MCNPX developed at LANL is an important tool in the design of transmuter technology. It must be validated, however, for the neutron energy that will be employed. Experiments are being …

Nuclear Criticality Analyses Of Separations Processes For The Transmutation Fuel Cycle: Quaterly Report, William Culbreth, Pang Tao

Separations Campaign (TRP)

During the first quarter of the work, the tasks included training students in the use of Monte Carlo codes used in radiation transport studies and the assessment of neutron multiplication factors for specific problems outlined by ANL-East through Drs. Laidler and Vandegrift.

The proposal also included objectives for the first year of work on this project, as listed below. The work conducted in the first quarter of the project was in partial completion of these objectives.

• Train UNLV students in the use of SCALE and/or MCNP for the assessment of nuclear criticality.

• Assess neutron multiplication factor, k_{eff …}

Large Nondipole Effects In The Angular Distributions Of K-Shell Photoelectrons From Molecular Nitrogen, Oliver Hemmers, H. Wang, P. Focke, I. A. Sellin, Dennis W. Lindle, J. C. Arce, J. A. Sheehy, P. W. Langhoff

Environmental Studies Faculty Publications

Measurements of angular distributions of K-shell electrons photoejected from molecular nitrogen are reported which reveal large deviations at relatively low photon energies ( ħω≤500eV) from emission patterns anticipated from the dipole approximation to interactions between radiation and matter. A concomitant theoretical analysis incorporating the effects of electromagnetic retardation attributes the observed large nondipole behaviors in N₂ to bond-length-dependent terms in the E1⊗(E2,M1) photoelectron emission amplitudes which are indicative of a potentially universal nondipole behavior in molecular photoionization.

Inside Unlv, Diane Russell, Jennifer Vaughan, Richard Jensen, Mae Worthey-Flennoy

Inside UNLV

No abstract provided.

The Suitability Of Reclaimed Agricultural Lands Along The Lower Colorado River For Native Riparian Habitat Restoration, Patti Aaron

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to determine the suitability of agricultural lands for use in native riparian restoration efforts under development for the Lower Colorado River Multi-Species Conservation Program. Assuming these fields are productive for crops, would they be productive for cottonwood-willow restoration? There are two aspects to consider: (1) the edaphic conditions required for three major LCR agricultural crops; alfalfa, cotton, and wheat, and (2) whether those conditions are consistent with the conditions required for the restoration of native LCR riparian habitat, primarily Fremont cottonwood (Populus fremontii) and Goodding willow (Salix gooddingii). Using the case study research approach …

Challenges For The New West: Economic Impacts Of Wilderness In Nevada's Rural Counties, Lesley Regina Argo

UNLV Theses, Dissertations, Professional Papers, and Capstones

Public lands designated as part of the National Wilderness Preservation System are removed from multiple-use management for protection of their natural condition. Opponents argue that "locking up" the natural resources on these lands through designation will undermine the rural economies in the west that are dependent upon extractive industries such as mining and logging. Proponents argue that the "Old West" reliance on extractive industries is declining and, in the "New West", wilderness promotes economic development in rural communities by preserving the amenity values that draw population and employment to the region. Characteristics of Nevada's economy, population and land challenge the …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #1, Georg F. Mauer

Fuels Campaign (TRP)

The first three months of the project covered the following:

• Literature review: A comprehensive study of the pertinent publications pertaining to transmuter fuels composition and manufacturing processes was conducted.

• Visit at ANL West in Idaho Falls, ID: Dr. Mauer visited the ANL West facility and met with his National Laboratory Collaborator, Dr. Mitchell K. Meyer, Group Leader, Fabrication Development on October 14 and 15, 2001.

• Student Paper Presentation at the ANS Annual Meeting by Ph.D. student Mr. Jae-Kyu Lee. Title: Transmuter Fuel Fabrication Processes.

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Aaa Task-4 Quarterly (September 1 – November 30, 2001) Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including HT- 9, EP 823 and 422. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these alloys will be evaluated in environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. The extent and morphology of cracking of these alloys will further be evaluated …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823: Task 10, First Quarter Report, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The objective of this task is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. The test material will be thermally treated prior to evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface analytical techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall results are expected to provide a mechanistic understanding of high-temperature deformation behavior of Alloy EP-823 as a function of heat treatment.

Highlights of Accomplishment

• …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report August 16,2001- November 15, 2001, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AAA program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 8/16/01- 11/15/01, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible. The process involves evacuation of the furnace. The evacuation of the furnace also evacuates quartz rods used as fuel pin molds. Once evacuated the open ends of the molds are lowered into the melt; the casting furnace is then rapidly pressurized, forcing the molten metal up into the evacuated molds where solidification occurs.

This process works well …