Kinesiology Commons^™

2015 Oklahoma Research Day Full Program, Northeastern State University

Oklahoma Research Day Abstracts

This document contains all abstracts from the 2015 Oklahoma Research Day held at Northeastern State University.

An Investigation Of The Relationship Between Axonal Injury, Biomarker Expression And Mechanical Response In A Rodent Head Impact Acceleration Model, Yan Li

Wayne State University Dissertations

In the United States 1.4 million people sustain traumatic brain injury (TBI) each year, resulting in 235,000 hospitalizations and 50,000 fatalities annually. Traumatic axonal injury (TAI) is a serious outcome of TBI that accounts for 40-50% of hospitalizations due to head injury and one third of the mortality due to TBI, and it is difficult to diagnose and evaluate. The purpose of this dissertation is to determine mechanical injury predictors for TAI and identify potential biomarkers to evaluate TAI.

In this dissertation, a modified Marmarou impact acceleration injury model was developed to allow the monitoring of velocity of the impactor …

A Multi-Directional Treadmill Training Program For Improving Gait, Balance, And Mobility In Individuals With Parkinson’S Disease: A Case Series, Kimberly Smith, Kurt Jackson, Kimberly Edginton Bigelow, Lloyd L. Laubach

Mechanical and Aerospace Engineering Faculty Publications

Treadmill training is a commonly used intervention for improving gait in people with Parkinson’s disease (PD). However, little is known about how treadmill training may also influence balance and other aspects of mobility.

The purpose of this case series was to explore the feasibility and possible benefits of multi-directional treadmill training for individuals with PD. Four participants (62.3 ± 6.5 yrs, Hoehn & Yahr 2-4) performed 8 weeks of treadmill training 3 times per week. Weeks 1-4 included forward walking only, while weeks 5-8 included forward and multi-directional walking. Participants were tested every 4 weeks on 4 separate occasions. Outcome …

A Methodology For Physically-Based Contact And Meniscus Properties In Rigid-Body Computational Knee Modeling, Stephen Wilson

Open Access Theses & Dissertations

Determining natural inner knee mechanics is a longstanding goal for researchers with applications to prevention and treatment of knee trauma and osteoarthritis. Physical testing has only provided limited information of knee mechanics due to technical challenges and cost. Modeling has been used for decades to obtain some of this otherwise inaccessible information, and recently finite element analysis (FEA) has become a popular means to this end. However, FEA requires time intensive mesh-creation and has large computational requirements. Ideally, model creation should be easy and simulations should be fast to allow for sensitivity analysis. Although allowing easier model creation and offering …

How Sensitive Is The Deltoid Moment Arm To Joint Center Changes With Rtsa?, David Walker, Allison Kinney, Aimee Struk, Benjamin J. Fregly, Thomas Wright, Scott Banks

Mechanical and Aerospace Engineering Faculty Publications

The goal of this study was to assess the sensitivity of the deltoid muscle moment arms as a function of joint configuration for an existing RTSA subject. High variations were found for all three deltoid components. Variation over the entire abduction arc was greatest in the anterior and lateral deltoid, while the posterior deltoid moment arm was mostly sensitive to joint center changes early in the abduction arc. Moment arm changes of 10-16mm represent a significant amount of the total deltoid moment arm. This means there is an opportunity to dramatically change the deltoid moments arms through surgical placement of …

Deltoid Moment Arms During Abduction: A Subject-Specific Musculoskeletal Modeling Study In Healthy Shoulders And Shoulders With Rtsa, David Walker, Allison Kinney, Aimee Struk, Benjamin J. Fregly, Thomas Wright, Scott Banks

Mechanical and Aerospace Engineering Faculty Publications

Reverse total shoulder arthroplasty (RTSA) is increasingly used in the United States since approval by the FDA in 2003. RTSA relieves pain and restores mobility in arthritic rotator cuff deficient shoulders. Though many advantages of RTSA have been demonstrated, there still are a variety of complications (implant loosening, shoulder impingement, infection, frozen shoulder) making apparent much still is to be learned how RTSA modifies normal shoulder function. The goal of this study was to assess how RTSA affects deltoid muscle moment generating capacity post-surgery using a subjectspecific computational model driven by in vivo kinematic data.

A Novel Approach To Estimation Of Patient-Specific Muscle Strength, David Walker, Allison Kinney, Benjamin J. Fregly, Thomas Wright, Scott Banks

Mechanical and Aerospace Engineering Faculty Publications

Current modeling techniques have been used to model the Reverse Total Shoulder Arthroplasty (RTSA) to account for the geometric changes implemented after RTSA. Though these models have provided insight into the effects of geometric changes from RTSA these is still a limitation of understanding muscle function after RTSA on a patient-specific basis. The goal of this study sought to overcome this limitation by developing an approach to calibrate patient-specific muscle strength for an RTSA subject.

Modeling And Development Of Human Interface For Pedestrian Simulator, Romesh Khaddar

UNLV Theses, Dissertations, Professional Papers, and Capstones

According to Traveler opinion and perception survey of 2005, 107.4 million Americans use walking as regular mode of travel, which amounts to 51% of American population. In 2009, 4092 pedestrian fatalities have been reported nationwide with a fatality rate of 1.33 which totals 59,000 crashes. Also, pedestrians are over represented in crash data by accounting more than 12% of fatalities but on 10.9% of trips. This makes a perfect case for understanding the causes behind such statistics, calling for a continuous research on pedestrians walking behavior and their interactions with surroundings.

Current research in pedestrian simulation focuses on surveys and …

Analysis And Application Of Passive Gait Rehabilitation Methods, Ismet Handzic

USF Tampa Graduate Theses and Dissertations

Human gait is elegant and efficient in propelling the body forward. While a healthy human gait is symmetric, any deviation from symmetry can cause inefficiencies to the entire body. Such asymmetries may present themselves in hemiplegic patients, prosthetic users, lower limb injuries, limb height and weight discrepancies, or abnormal overground foot rolling. In this dissertation, practical passive methods to alleviate such asymmetric walking dynamics are presented. The novel concepts presented in this manuscript can all be related and applied to passive gait rehabilitation, that is, the rehabilitation of a person's gait through methods that do not require external power. One …

Design, Development And Testing Of A Balance Board With Variable Torsional Stiffness And Time Delay, Denise Renee Cruise

Open Access Theses

The ability to balance and maintain upright posture can decline for a variety of reasons, such as aging and neuromuscular impairment. As the ability to balance declines, the risk of falling increases. Falls are a major cause of injury, and often lead to a dramatic decline in quality of life. Currently, to alleviate balance deficiencies, people participate in balance training, which most commonly refers to standing on an unstable balance board; the most common boards used are either passive wobble boards, or more advanced commercial systems such as the Biodex System SD ® or the Neurocom SMART Balance Master® . …

Team Joseph: Adaptive Aquatic Device, Paul Sands, Lilly Hoff, Andrea Voigt

Mechanical Engineering

The scope of this project included designing and fabricating an adaptive aquatic device for Joseph, a 20 year old student in the Special Education Program at San Luis Obispo High School with a subset of cerebral palsy known as spastic quadriplegia. The project was presented at the beginning of the Fall 2013 quarter to the mechanical engineering students at Cal Poly with the aspiration that a team of engineers would construct a device that would allow Joseph, his friends and family to compete in their first triathlon on July 27, 2014. The project was humbly accepted by mechanical engineering students …

Adaptive Basketball Shooter - Final Project Report, Jenna N. Becker, Richard A. Galanti, Justin D. Haley, Brett Y. Nayudu

Mechanical Engineering

The Friday Club is a joint venture between the Cal Poly Kinesiology Department and the San Luis Obispo Special Olympics that offers people with varying degrees of disability the opportunity to meet weekly and learn various sports and games. At Friday Club, athletes in wheelchairs with limited arm strength use devices built by Cal Poly mechanical engineering students in order to participate in various sports. Many devices are designed to attach to the Universal Play Frame (UPF), a wheel-chair attachment. The purpose of this project was to design and build a UPF device that will launch a basketball, so that …

Biomechanical Analysis Of Gait Kinetics Resulting From Use Of A Vacuum Socket On A Transtibial Prosthesis, Maria De Lourdes Ramos Gonzalez

Honors College Theses

The technology and design of lower limb prosthetics have evolved greatly since their introduction. The current study proposed to compare the effects of a conventional pin socket attachment and a vacuum socket attachment for a transtibial amputee. Whereas traditional measurements of gait utilize force plates and camera systems, this study made use of a small tri-axial load cell located at the base of the socket to measure the forces and moments exerted during a regular gait cycle. The hypothesis tested stated that a vacuum pump socket attachment, when compared to a non-vacuum (pin) socket, will have a significant effect on …

Asymmetric Unilateral Transfemoral Prosthetic Simulator, Tyagi Ramakrishnan

USF Tampa Graduate Theses and Dissertations

amputation, which includes reduced force generation at the knee and ankle, reduced control of the leg, and different mass properties relative to their intact leg. The physical change in the prosthetic leg leads to gait asymmetries that include spatial, temporal, or force differences. This altered gait can lead to an increase in energy consumption and pain due to compensating forces and torques. The asymmetric prosthesis demonstrated in this research aims to find a balance between the different types of asymmetries to provide a gait that is more symmetric and to make it overall easier for an amputee to walk.

Previous …

Examining The Role Of Attention In Steering Using A Dual Task Paradigm, Venkata Naga Pradeep Ambati

Open Access Theses & Dissertations

Changing the direction of locomotion, often referred to as "steering", is an integral component of human locomotion. Steering requires maintaining dynamic balance while translating and rotating the body in the new travel direction. Given the level of sensation thought to be involved in sub serving goal directed modifications in steering, it is highly likely that steering control may require attention. Since attention resources decline with increasing age, we may see the influence of age on steering performance when attention resources are limited. Therefore, this study sought to investigate the role of attention in steering using a dual task paradigm in …

Pedestrian Head Protection During Car To Pedestrian Accidents: In The Event Of Primary Impact With Vehicle And Secondary Impact With Ground, Vishal Gupta

Wayne State University Dissertations

Current regulations for assessing pedestrian safety use a simplified test setup that ignores many real-world factors. In particular, the level of protection is assessed using a free-motion headform impacting the vehicle's hood at a fixed angle. As such, this test setup does not capture the effect due to the vehicle front-end profile, nor does it comprehend injury due to a possible secondary impact of the pedestrian's head with ground. This thesis aims to numerically simulate vehicle to pedestrian crashes to develop knowledge that may suggest ways to improve safety above and beyond the regulatory tests. Inputs to the simulations include …

Skeletal Muscle Contraction Simulation: A Comparison In Modeling, Jonathan M. Ford

USF Tampa Graduate Theses and Dissertations

Computer generated three-dimensional (3-D) models are being used at increasing rates in the fields of entertainment, education, research, and engineering. One of the aspects of interest includes the behavior and function of the musculoskeletal system. One such tool used by engineers is the finite element method (FEM) to simulate the physics behind muscle mechanics. There are several ways to represent 3-D muscle geometry, namely a bulk, a central line of action and a spline model. The purpose of this study is to exmine how these three representations affect the overall outcome of muscle movement. This is examined in a series …

Formulation To Predict Lower Limb Muscle Forces During Gait, Gil Serrancolí, Jonathan P. Walter, Allison Kinney, A. Barjau, Benjamin J. Fregly, Josep M. Font-Llagunes

Mechanical and Aerospace Engineering Faculty Publications

The human body has more muscles than Degrees of Freedom (DoF), and that leads to indeterminacy in the muscle force calculation. This study proposes the formulation of an optimization problem to estimate the lower-limb muscle forces during a gait cycle of a patient wearing an instrumented knee prosthesis. The originality of that formulation consists of simulating muscle excitations in a physiological way while muscle parameters are calibrated. Two approaches have been considered. In Approach A, measured contact forces are applied to the model and all inverse dynamics loads are matched in order to get a physiological calibration of muscle parameters. …

Optimization Problem Formulation For Predicting Knee Muscle And Contact Forces During Gait, Gil Serrancolí, Jonathan P. Walter, Allison Kinney, Benjamin J. Fregly, Josep M. Font-Llagunes

Mechanical and Aerospace Engineering Faculty Publications

The human body has more muscles than degrees of freedom (DOF), which leads to indeterminacy in the muscle force calculation. In this study, an optimization problem to estimate the lower-limb muscle forces during a gait cycle of a patient wearing an instrumented knee prosthesis is formulated. It consists of simulating muscle excitations in a physiological way while muscle parameters are calibrated.

Preliminary Development Of A Subject Specific Finite Element Model Of The Hindfoot, Liang Dong

Mechanical & Aerospace Engineering Theses & Dissertations

The human hindfoot is a complex structure and its medical treatment can vary from patient to patient. If physicians have access to a patient specific computer model, the optimal treatment option can be explored on the model before preforming it on the patient. The purpose of this study was to create a quasi-static finite element model and to show the stress contour in the cartilage between the bones. Ankle joint contact pressure was collected on one cadaver limb with a 40 lbs ( 178 N) axial load applied and tendon loads applied to simulate the ratio of tendon loading during …

Design And Development Of A Stair Ascension Assistive Device For Transfemoral Amputees, Casey Michael Barbarino

Master's Theses

Transfemoral amputees around the world experience increased difficulty in climbing stairs due to lack of muscle, balance, and other factors. The loss of a lower limb greatly diminishes the amount of natural force generation provided that is necessary to propel oneself up stairs. This study investigated possible solutions to the problem of stair ascension for transfemoral amputees by the means of designing and developing an externally attachable device to a prosthesis. The number of amputations from military service has greatly increased since 2008, which shows there is a clear need for assistive devices (Wenke, Krueger, & Ficke, 2012). With the …

Modeling Tools For Conformal Orthotic Devices, Steven David Riddle

Open Access Theses

The purpose of this thesis is to advance the design of conformal orthotic devices through the development of two modeling tools to address knowledge gaps in the field.

The field of human orthotics has been continually troubled by identifying successful methods of harnessing devices to the body. Past orthotics have utilized a rigid framework with minimal degrees of freedom (DOFs) driven by hard actuators attached to the body at select anchor points. Many devices design the structure and anchor points such that they reduce the degrees of freedom of a targeted joint, limiting the user's mobility and often causing the …

Modulation Of Cell-Matrix Interaction For Cryopreservation Of Engineered Tissue, Angela Christine Seawright

Open Access Theses

Long term preservation of functional engineered tissues can significantly advance tissue engineering industry and regenerative medicine. Several preservation techniques have been proposed and investigated for this purpose, and cryopreservation is a leading candidate. While tissues are cryopreserved, ice forms in both the extracellular and intracellular spaces and causes freezing-induced spatiotemporal deformation of the tissue. During this process the cells undergo dehydration by the freezing-induced osmotic pressure difference and mechanical deformation, transmitted through cell-extracellular matrix adhesions. However, the significance and interaction of these cellular level transport and mechanics processes are not well understood. Therefore, this study aims to establish mechanistic understanding …

Modeling Of Legged Locomotion With A Suspended Load In The Sagittal Plane, Karna P. Potwar

Open Access Theses

Walking or running while carrying loads has always been a tedious task, more so when the loads are heavy. Such a task of carrying loads not only requires extra effort but also leads to physical pain and in some cases injury. Prior studies on human locomotion with a suspended load have used models that are restricted in their DOFs and so are not able to take into account the fore aft movement in human beings. The objective of this thesis is to model the dynamics of sagittal plane center-of-mass locomotion with a suspended load and apply findings to carrying loads …

Changes In In Vivo Knee Contact Forces Through Gait Modification, Allison Kinney, Thor F. Besier, Amy Slider, Scott L. Delp, Darryl D. D'Lima, Benjamin J. Fregly

Mechanical and Aerospace Engineering Faculty Publications

Gait modification represents a non-invasive method for reducing knee joint loading in patients with knee osteoarthritis. Previous studies have shown that a variety of gait modifications are effective in reducing the external knee adduction moment. The external knee adduction moment is often used as a surrogate measure of medial compartment force. However, a recent study showed that reductions in the external knee adduction moment do not guarantee reductions in medial compartment loads. Therefore, direct measurement of changes in knee contact force is important for determining the effectiveness of gait modifications. A previous study found that medial thrust gait and walking …

Throwing Frame For Athletes With Dissabilities, Andrew Higgins, Stefan Owechko, Gabriel (Gabe) Terrasas, Kevin Crisfield

Mechanical Engineering

Team Zeus’ senior project was to design, build and test a working throwing frame system for Bridge II Sports, a nonprofit organization in North Carolina. The throwing frame is used to allow athletes and individuals with disabilities to throw shot-put, discus, and javelin using a frame to sit against. Team Zeus was specifically tasked to build a frame that is lighter weight and more transportable than products that are currently on the market. This frame also is adjustable to accommodate a wide range of athlete weights, sizes, and abilities. The final result is a 35lb aluminum frame with two different …

Biomechanical Testing On Cadaveric Spines For Different Treatments That Affect Lumbar Stability, Sabrina Alejandra Gonzalez Blohm

USF Tampa Graduate Theses and Dissertations

Stenosis is one of the most common causes for spinal surgery. Laminectomy decompression and fusion are surgical procedures prescribed for this condition. The intention of this work was to investigate the effects of a laminectomy decompression, followed by fusion, on a lumbar functional spinal unit (FSU) through in vitro dynamic (±8Nm at 0.125Hz) and quasi-static (±7.5Nm at 0.1Hz) biomechanical tests, for flexion, extension, bending and rotation motions.

Six FSUs where disarticulated from four human cadaveric lumbar spines (63 ± 12 years) and were tested under the following sequence: (1) intact, (2) laminectomy decompression, and (3) Pedicle Screw System (PSS), using …

Evaluation Of Transfer Technologies To Preserve Shoulder Function In Sci, Karen Michelle Mann

USF Tampa Graduate Theses and Dissertations

This study investigated a series of independent unassisted and device-assisted transfers from a wheelchair to vehicle mock-up and vice versa while simultaneously capturing kinematic, kinetic and electromyographic (EMG) data of impaired volunteers. The study provides a venue for observation and evaluation of upper extremity (UE) joint stresses, muscular force and functional demands associated with transfers in persons with spinal cord injury (SCI) to ultimately prevent UE injury, minimize excessive stress, preserve functionality and limit pain. If people with SCI lose function of their UEs, due to pain and/or degeneration, they must then rely on others for everyday tasks.

Five paraplegic …

Football Helmet Fitment And Its Effect On Helmet Performance, Ron Jadischke

Wayne State University Theses

A method and system to objectively quantify helmet fitment was designed and developed. It measures the pressure between the energy-absorbing material in the helmet and the athlete's head. This system is also capable of measuring surface pressure during impact events. A volunteer-based field study was conducted to quantify how helmets were fitting athletes in a real-life setting. The helmets fit athletes in varying degrees of tightness and evenness. Most athletes (59%) had the highest pressures in the frontal area and 29% had the highest pressure in the occipital area. A large-sized helmet on the Hybrid III headform represented how most …

Contact Pressure Distribution Of Osteochondral Defects Of The Knee: Effects Of Non-Vertical Walls, Scott Ensminger

Wayne State University Theses

Purpose: To examine the relationship between well-shouldered osteochondral defects and

defects of different geometries by studying their effects on rim stress concentration and

load redistribution in the human knee.

Methods: Ten fresh-frozen cadaveric knees were mounted at 30° of flexion in a materials

testing machine. Digital electronic pressure sensors were placed in the medial and lateral

compartments of the knee. Dynamic pressure readings were recorded throughout the

loading and holding phases as each knee was loaded to 700N and held for 5 seconds.

Artificial defects were created in each knee to simulate well-shouldered defects and

beveled-defects. Loading was repeated for …