Other Engineering Commons^™

In-Situ Observation Of Retained Austenite And Residual Stress Evolutions During Tempering Of Carbonitrided Din 1.6587 Alloy Steel, Richard J Katemi

Tanzania Journal of Engineering and Technology (TJET)

This paper investigates the evolution of retained austenite and residual stresses during and after tempering of carbonitrided 18CrNiMo7-6 low alloy steel carried out using in-situ X-ray diffraction technique. In this case, two carbonitriding treatments with different surface the retained austenite contents of 20 and 54 mass.-% are investigated. The tempering is carried out in a continuous heating mode to 650°C as well as in isothermal mode at holding temperature of 170, 240, and 300°C for 2 hours. During continuous heating at a heating rate of 10°C/min, the retained austenite started to decompose at 290°C. On isothermal holding at 170°C for …

Estimation Of Storage Tank Capacities For Different Roofing Areas For Rainwater Harvesting In Dodoma Urban, Tanzania, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

This study uses a mass balance model and economic analysis technique to present an estimation of roofing areas and storage tank capacity for Rainwater Harvesting (RWH) system. The water-saved benefits were estimated using the monthly rainfall of over 39 years from 1981 to 2020 and five roofing areas. The proposed roof-storage-ratio method presents the minimum requirement of roof area and storage tank size when the ratio value is closer to 1. The benefit-cost ratio and percentage of reliability indicated the optimal roofing areas ranging between 200 and 300 m2 for storage tank capacity between 20 and 25 m3, with a …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

The Music Bluetooth Controller: An Intersection Between Technology And Music, Lydia Wu

Senior Honors Theses

The modern musician faces a new challenge: how can technology be used to enhance a performance? This thesis documents the development of a Bluetooth remote controller that will aid today’s performing musicians by interacting with a digital display (e.g., an iPad) to flip musical score pages remotely. At its core, while mimicking a Bluetooth pedal (the current industry standard), this device attaches to the musician’s hand. In its pilot stages, the device has been referred to “MBC” (Music Bluetooth Controller).

Spatial And Temporal Variation Of Selected Water Quality Parameters In The Tanzanian Side Of Lake Victoria, Richard Joseph Kimwaga

Tanzania Journal of Engineering and Technology (TJET)

Lake Victoria’s water quality is increasingly becoming under heavy pressure mainly due to land based activities and aerial inputs which are taking place within the basin. This study was carried out to assess the spatial, including vertical and temporal, variation of the water quality of Lake Victoria on the Tanzanian side. Historical water quality data for the period from 2000 to 2016 was collected. Temperature, pH, Dissolved Oxygen (DO) and Turbidity were selected for study since they are the mostly measured and monitored water quality parameters. Land use-land cover changes were analysed using ArcGIS. ILWIS 3.7 software was used to …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Analysis Of Errors Of The Ultrasonic Level And Increasing The Accuracy Of Measuring The Level Of Liquid Materials In Non-Stationary Media, Azamat Alijonovich Yusupov

Chemical Technology, Control and Management

This article is devoted to the analysis of the total error of an ultrasonic level meter designed to measure the level of liquid materials in order to improve the accuracy of the measuring system in tanks. The components of the total error of the process of measuring transformation of the liquid level are determined and the analysis of the main characteristics is carried out, to reduce the random error of the measurement system, the task of ensuring the accuracy of measurement and control of the level using an ultrasonic level gauge is presented, by averaging the measurement results when calculating …

Versatile Home Workspace Environment, Kayli Holmes

Honors Theses

Since the initial spread of COVID-19, many individuals around the world have experienced a rapid shift from an external workplace, to needing a dedicated workspace within the home. While some individuals have been faced with new distractions like family members and pets, others have been faced with the struggle of having a workspace in common areas, where relaxation and socialization normally occur. Due to the needs for many people to work from home and be isolated from coworkers, it is essential for living spaces to be adaptable to meet these needs. Producing an effective separation can help lead to overall …

Cost Functions Of Crabs: Applications Of Hermit Crab Shell Exchange Behavior To Vacancy Chain Modelling, Hannah Miele

Senior Honors Theses

Vacancy chain systems function as a method of resource distribution in domains such as housing and labor markets. Hermit crabs also employ vacancy chains as a method of shell exchange. Application of vacancy chain modelling in engineering has been attempted, but numerous flaws exist in the developed vacancy chain scheduling algorithm. This work addresses the lack of an appropriate vacancy chain cost function by developing a generalizable cost function based on hermit crab shell exchange behavior. The cost function’s purpose is enabling development of realistic engineering experiments and models based on real-world vacancy chain systems.

Exploring How Prize Challenges Complement An Organization's Innovation Efforts, Ademir Vrolijk, Zoe Szajnfarber

CESUN Conference

prize challenge, open innovation, crowdsourcing, NASA, 3D Printed Habitat Challenge, additive manufacturing

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Influence Of Fiberboard Container Design On Compression Bulge Displacement, Koushik Saha, Shane Messner, John Dizon, Nirav Chhajed, Jay Singh

Journal of Applied Packaging Research

Bulge effect is the out-of-plane displacement of a panel of a corrugated fiberboard box from its original position. This bulge effect often is the result of excessive weight being placed on a box that rests at the bottom of a palletized load. Panels that are out-of-plane reduce the stacking strength of the box and can result in damage to products inside the containers. This study was designed to find the influence of fiberboard container design on its bulging performance when under compression. The objective of the study was to determine if change in height of a regular slotted container will …

Evaluation Of A Bulge Reduction Technology For Corrugated Fiberboard Containers Under Static Compression, Daan Peleman, Jay Singh, Koushik Saha, S. Roy

Journal of Applied Packaging Research

This research examines the effect of top-to-bottom static compression load on the bulge of RSC containers. The study compares a control regular slotted container (RSC) constructed with corrugated fiberboard to tape-reinforced designs. The bulge reduction, achieved using various tape placements and conditioning environments, were measured. Currently, no research on the effect of reinforcement tape towards reduction in the out-of-plane displacement (bulging) of the corrugated fiberboard panels has been undertaken. Samples related to four different container designs, varying by presence, quantity and the position of the reinforcement tape on the vertical panels, were tested and analyzed. The study involved the use …

Development Of Water Coning Control Design Metrics In Naturally Fractured Reservoirs, Samir Prasun

LSU Doctoral Dissertations

Naturally fractured reservoirs (NFRs) with bottom-water are known for their instant water breakthrough and severe water coning that reduces oil recovery. This is because water channels through the highly permeable fractures easily connecting the well to the aquifer bypassing the oil contained in the matrix. Remedial techniques such as producing below critical-oil rate, optimizing the well spacing and installing the downhole water sink (DWS)/ downhole water loop (DWL) technology, have already been successfully tested in single-porosity reservoirs (SPR). However, applicability of these techniques in NFRs are unknown since only a few studies have been performed on their feasibility in NFRs, …

Product Realization Capstone: Element Proof Safety Steps For Willie Price Lab School, Catherine Thomas, Allan Heuerman, Jared Mumme

Honors Theses

The purpose of this document is to describe the process we took to complete our capstone which paired the Center for Manufacturing Excellence with the Willie Price Lab School. The goal of the capstone was to remake step stools for the students of Willie Price, as the last stools failed to withstand weather damage. However, with the COVID-19 pandemic, plans were hindered, shifting the goal from actually producing the steps to creating instructions so that a younger Center for Manufacturing class could complete the production at a later date. Standardized Work Instructions, a detailed production plan, and engineering drawings were …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Comparison Of Hybridizing Options For Solar Heat, Biomass And Heat Storage For Electricity Generation In Spain, Cm Iftekhar Hussain, Brian Norton, Aidan Duffy

Articles

Diurnal and seasonal variations of direct solar energy circumscribe locations suitable for sole use of concentrated solar power for electricity generation, whereas to generate electricity at night and during winter months, biomass systems can be used that incur fuel expenditures and may encounter fuel supply discontinuities. Combining solar heat, biomass conversion and heat storage in a hybrid electricity generation plant may overcome the limitations of sole use of any one of these energy sources in specific geographic and/or economic conditions. In this work standalone biomass, hybrid concentrated solar power-biomass and hybrid concentrated solar power-biomass-thermal energy storage power generation systems are …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Emergency Department Triage Process Improvement, Tessa Williams

Honors Theses

This senior design project was completed at Ascension Borgess Hospital located in Kalamazoo, Michigan. The mission of Ascension Borgess Hospital is to provide patient centered care. In 2018, 562 patients left the Emergency Department (ED) without being seen, which is a large safety risk for the patients and hospital. Based on this, as well as other obstacles, this project focused on meeting the mission of Ascension Borgess by improving key ED metrics that impact patient centered care. In order to meet that mission, this study aims to improve patient experience, safety and quality of the care provided, profitability for the …

(Poster) Internal Restoration And Modernization Of A 1948 Wwii Era Jukebox, Miles Furr, Cristiana Olarinre, Joel Carpenter, Elijah Knox, George Ricco, Paul Talaga, Suranga Dharmarathne

ASEE IL-IN Section Conference

Using Six Sigma guidelines under the sponsorship of The University of Indianapolis in cooperation with the client, Brugh Industrial Engineering, this project is to modernize the functionality and interface of a Rockola Model 1428 Jukebox while maintaining its vintage appeal. The process of modernization includes meeting today's industrial safety standards, incorporating ethernet protocol, and utilizing a programmable logic controller, PLC. The jukebox is a showcase of current automation technology. Lighting has been upgraded from fluorescent and incandescent bulbs to addressable nano pixel LEDs. The amplifier, coin system, and record selection system were revitalized to OEM operation standards. All switches within …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Tooling For Injection Molding Using Laser-Powder Bed Fusion., Mohith Ram Buxani

Electronic Theses and Dissertations

Laser-Powder Bed Fusion (L-PBF) has been considered for some time by the injection molding industry for the fabrication of tooling for injection molding in order to address large lead times and costs for tool-making. Computer-aided simulations are also routinely used to evaluate new part and mold designs as well as understanding the effects of material compositions and processing conditions on part quality and overall productivity. However, there remains a significant need to integrate the perspectives from injection molding, 3D printing, metal powders, and component design and process simulation to better utilize LPBF for fabricating tooling required for injection molding. The …

Applications Of Complex Network Analysis In Electric Power Systems, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper provides a review of the research conducted on complex network analysis (CNA) in electric power systems. Moreover, a new approach is presented to find optimal locations for microgrids (MGs) in electric distribution systems (EDS) utilizing complex network analysis. The optimal placement in this paper points to the location that will result in enhanced grid resilience, reduced power losses and line loading, better voltage stability, and a supply to critical loads during a blackout. The criteria used to point out the optimal placement of the MGs were predicated on the centrality analysis selected from the complex network theory, the …

Compressed Air Systems Evaluation And Improvement, Lukas Swoboda

Honors Theses

This project was centered on recommending a new air compressor system for the Fluid System Connectors division of Parker Hannifin in Otsego, Michigan. The recommended compressor for the plant is a 250hp variable speed drive Ingersoll Rand Compressor. It is recommended that this compressor, along with two 35hp compressors already purchased by Parker be tied together using an automated system. In addition to the compressor, a flow controller was recommended to be implemented into the system.

Given that leaks are also a problem in the system, it is recommended that the majority of air leaks in the system be fixed …

The Eco-Smart Can V2.0, Darack B. Nanto

Appalachian Student Research Forum

I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT) to create a device that …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Travel To Extraterrestrial Bodies Over Time: Some Exploratory Analyses Of Mission Data, Venkat Kodali, Rohith Kumar Reddy Duggirala, Richard S. Segall, Hyacinthe Aboudja, Daniel Berleant

Journal of the Arkansas Academy of Science

This paper discusses data pertaining to space missions to astronomical bodies beyond earth. The analyses provide summarizing facts and graphs obtained by mining data about (1) missions launched by all countries that go to the moon and planets, and (2) Earth satellites obtained from a Union of Concerned Scientists (UCS) dataset and lists of publically available satellite data.

Technology Foresight: A Bibliometric Analysis To Identify Leading And Emerging Methods, Elizabeth Gibson, Tugrul U. Daim, Edwin Garces, Marina Dabic

Engineering and Technology Management Faculty Publications and Presentations

Foresight studies provide essential information used by the government, industry and academia for technology planning and knowledge expansion. They are complicated, resource-intensive, and quite expensive. The approach, methods, and techniques must be carefully identified and selected. Despite the global importance of foresight activities, there are no frameworks to help one develop and plan a proper foresight study. This paper begins Keywords: technology foresight; strategic foresight; adaptive foresight; Social Network Analysis (SNA); bibliometric tools; data mining; text mining. to close this gap by analyzing and comparing different schools of thought and updating the literature with the most current tools and methods. …