Other Engineering Commons^™

A Decision Support Tool For Building Integrated Renewable Energy Microgrids Connected To A Smart Grid, Damilola A. Asaleye, Michael D. Murphy, Michael Breen

Publications

The objective of this study was to create a tool that will enable renewable energy microgrid (REμG) facility users to make informed decisions on the utilization of electrical power output from a building integrated REμG connected to a smart grid. A decision support tool for renewable energy microgrids (DSTREM) capable of predicting photovoltaic array and wind turbine power outputs was developed. The tool simulated users’ daily electricity consumption costs, avoided CO₂ emissions and incurred monetary income relative to the usage of the building integrated REμG connected to the national electricity smart grid. DSTREM forecasted climate variables, which were used …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

See The Bigger Picture: A True Systems Approach To Healthcare, Brian J. Galli

Faculty of Computer Science/Management Engineering Publications

“Healthcare” is typically related directly to patient care, hospitals, and ambulatory services, but it is important to see that healthcare is beyond just the delivery of care in hospitals or ambulatory services. A more accurate systems approach to views the world of healthcare as one that involves several stakeholders, including: healthcare delivery (patient care in hospitals and ambulatory services), regulatory agencies, health insurance/health plan organizations, medical device design and manufacturers, pharmaceuticals, society, government (all levels), and healthcare reform organizations. All of these stakeholders relate to each other in many levels and impact our healthcare system.

This paper will cover the …

Ergonomics In Space Flight – Past, Present, & Future, Robert Consolo

Human Factors and Applied Psychology Student Conference

From the days of “The Rocket Men” to the uprising of SpaceX, spaceflight has always inspired awe in humanity. If you examine the men that were apart of those first missions, you will find that they were not only the most capable, but won the genetic lottery to become this nations first astronauts. Looking to the times of Mercury, you see the extreme constraints that potential astronaut candidates had to meet in order to go to space. Aside from the rigorous medical testing, potential candidates also had to meet strict height and weight requirements. Early candidates could not be taller …

Development Research And Implications For Cte, Jeff M. Shannon

Morehead State Theses and Dissertations

A capstone submitted in partial fulfillment of the requirements for the degree of Doctor of Education in the College of Education at Morehead State University By Jeff M. Shannon on March 9, 2016.

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Assessment Of Management And Documentation Systems For The Bowling Green State University American Society For Quality Student Branch, Sara Murphy

Master of Education in Instructional Design and Technology Plan II Graduate Projects

The Bowling Green State University (BGSU) American Society for Quality (ASQ) student branch seeks to provide current and prospective students the opportunity to expand or build upon current and evolving quality principles. This project seeks to provide the ASQ student branch the opportunity to develop documented systems of daily operations and other activities in relation to the defined BGSU ASQ student branch organizational objectives. The research associated with this project will provide detailed information related to the organizational requirements to aid in the development of documented systemic procedures. The information also indicates what practices should be in place to ensure …

Measuring And Analysing The Effect Of Openings And Vibration On Reusable Pharmaceutical Insulated Boxes With Daily Distribution, Péter Böröcz, Ákos Mojzes, Péter Csavajda

Journal of Applied Packaging Research

To control the climate when temperature sensitive drugs are delivered is an essential consideration of shippers and freight forwarders. It is common practice to utilize insulated boxes. A survey was conducted to determine the properties of these daily deliveries and factors were observed that influence the climate environment of drugs during travel. These factors included opening intervals, number of openings, trip times and distances. Then the results of the survey were used to perform the recorded circumstances of distribution in laboratory tests as close to reality as possible and analyse the effect of the above-mentioned factors. During real distribution the …

Lessons Learned From A Simulation Project In Construction Education, Saeed Rokooei, James D. Goedert

Department of Construction Engineering and Management: Faculty Publications

Virtual Interactive Construction Education (VICE) is a simulation designed for construction education. The purpose was to provide the traditional lecture-based construction contents along with supplementary instructions in a project-based learning environment. Six modules were proposed as a curriculum delivery guideline including: single span bridge, residential building, light commercial, heavy commercial, highway, and segmental bridge. The single span bridge was the first module used for prototype development providing an opportunity to design, analyze, implement, and test for effectiveness. This paper describes the design steps and results of this three-year research project. VICE-Bridge required participants to sequentially order the construction activities and …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Chemical Storage Of Wind Energy By Renewable Methanol Production: Feasibility Analysis Using A Multi-Criteria Decision Matrix, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: Faculty Publications

This study is for the technoeconomic analysis of an integral facility consisting of wind energy-based electrolytic hydrogen production, bioethanol-based carbon dioxide capture and compression, and direct methanol synthesis. ASPEN Plus was used to simulate the facility producing 97.01 mt (metric tons) methanol/day using 138.37 mt CO₂/day and 18.56 mt H₂/day. A discounted cash flow diagram for the integral facility is used for the economic analysis at various hydrogen production costs and methanol selling prices. The feasibility analysis is based on a multi-criteria decision matrix consisting of economic and sustainability indicators comparing renewable and non-renewable methanol productions. …

Ventilation Rates And Airflow Pathways In Patient Rooms: A Case Study Of Bioaerosol Containment And Removal, Ehsan S. Mousavi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research suggests pathways between pathogenic source (patient) and control (exhaust) may be the dominant environmental factor. While increases in airborne disease transmission have been associated with ventilation rates below 2 ACH, comparatively less data are available to quantify the benefits of higher …

A Comparison Of Combined Overlap Block Fuzzy Cognitive Maps (Cobfcm) And Combined Overlap Block Neutrosophic Cognitive Map (Cobncm) In Finding The Hidden Patterns And Indeterminacies In Psychological Causal Models: Case Study Of Adhd, Hojjatollah Farahani, Florentin Smarandache, Lihshing Leigh Wang

Branch Mathematics and Statistics Faculty and Staff Publications

In spite of researchers’ concerns to find causalities, reviewing the literature of psychological studies one may argue that the classical statistical methods applied in order to find causalities are unable to find uncertainty and indeterminacies of the relationships between concepts.

In this paper, we introduce two methods to find effective solutions by identifying “hidden” patterns in the patients’ cognitive maps. Combined Overlap Block Fuzzy Cognitive Map (COBFCM) and Combined Overlap Block Neutrosophic Map (COBNCM) are effective when the number of concepts can be grouped and are large in numbers. In the first section, we introduce COBFCM, COBNCM, their applications, and …

Modeling Preventive Maintenance In Complex Systems, Jessica Rivas

Open Access Theses

This thesis presents an explicit consideration of the impacts of modeling decisions on the resulting maintenance planning. Incomplete data is common in maintenance planning, but is rarely considered explicitly. Robust optimization aims to minimize the impact of uncertainty--here, in contrast, I show how its impact can be explicitly quantified. Doing so allows decision makers to determine whether it is worthwhile to invest in reducing uncertainty about the system or the effect of maintenance. The thesis consists of two parts. Part I uses a case study to show how incomplete data arises and how the data can be used to derive …

Application Of Assignment Problem Theory To Cal Poly's Week Of Welcome Program Presentation Schedule, Kevin T. Aban

Industrial and Manufacturing Engineering

The Week of Welcome (WOW) is a part of Cal Poly’s Orientation Programs. One of the main objectives of WOW is to provide content to new students on a variety of different topics in the form of Awareness Presentations. The problem being addressed in this paper is that of assigning the orientation groups of incoming students to these Awareness Presentations so that they have a schedule that meets all of the necessary criteria. The most important of those requirements is schedule balance and flexibility for future use. This scheduling problem is solved through the use of operations research and binary …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Polyparking, Christopher Blackmer, Michael Suttie

Biomedical Engineering

The purpose of this senior project is to analyze the various options for the implementation of a parking lot information system on the California Polytechnic State University, San Luis Obispo campus. This system would involve three main components: physical counting hardware, a database and analysis organization system, and a user interface for disseminating the gathered information. The project investigates and provides commentary on various available and commonplace systems, and the benefits and drawbacks of these systems. During the course of the project, a flexible database and user-interface was developed in Microsoft Access, which will allow counter output to be gathered …

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

Rfid For Inventory Of Medical Records, Johny Wu

Biomedical Engineering

The purpose of this project is to explore the feasibility and economic viability of the implementation of a radio frequency identification (RFID) system in a large-scale, medical office setting. Practitioners in fields such as; medicine, chiropractic, dentistry, nursing, pharmacy, allied health, and other care providers do not have a sufficient method for tracking filing forms. RFID has the potential to reduce wait time, improve checking-in time, and decrease the possibility of interchanging documents between patients.

The purpose of this RFID system is to improve upon the filing system already in place in any office setting. The major consideration behind this …

A Case Study Investigation On Purchasing Green Transport And Logistics Services, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson, Edward Sweeney

Conference papers

In the context of green supply chain management, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. Despite this growing importance, little has been written in relation to purchasing green transport and logistics services. Considering the strong environmental impact associated with transport and logistics activities, much remains to be learned concerning buyer’s practices when sourcing more sustainable services from third party logistics companies (3PLs). The aim of this paper is to explore practices of buying green transport and logistics services in three different European countries …

Creating A State-Wide Transfer Program For Engineering Technology And Technology Management Studies, Gregory Arbuckle, Mark Doggett

SEAS Faculty Publications

The primary purpose of the Western Kentucky Pipeline for 2+2+2 Engineering Technology and Technology Management (ET/TM) students program is to significantly increase degree production and workforce preparation in central and western Kentucky through the construction of a long-term sustainable, reproducible model bridging program of cooperation between Western Kentucky University (WKU), Murray State University (MSU) and the Kentucky Community and Technical College System (KCTCS). The program will significantly increase industrial and technology education opportunities, technology enrollment and two and four-year degree completion. Additionally, this project supports the Kentucky Council on Postsecondary Education’s (CPE) goal to double the overall number of undergraduate …

Neutrosophic Masses & Indeterminate Models Applications To Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses. The best approach for dealing with such models is the neutrosophic logic.

Characterization Of Key Process Parameters In Injection Blow Molding For Improving Quality, Aspen D'Costa

Online Journal for Workforce Education and Development

The purpose of this study was to discover the performance of significant process parameters in manufacturing 20 oz. plastic beverage bottles. An experimental methodology was carefully designed to examine the characteristics of key variables such as ambient and operating temperatures, process line operators, resin types, resin colors and operating lines associated with a plastic bottle manufacturing line. More explicitly, this study seeks to identify the definitive relationship between the selected process parameters for the production machine (Sidel™) and the ensuing product quality. Also, this study was conducted to evaluate the performance characteristics of Post Consumer Resin (PCR), virgin resin and …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Ackermann Steering Geometry Applied To A Skateboard Truck, Daniel D. Downs

Industrial and Manufacturing Engineering

Conventional skateboard trucks are currently unable to meet the challenges of the modern enthusiast. They are lacking in key performance metrics such as handling, stability, and traction. Longboard enthusiasts, whom rely heavily on handling performance, are hungry for new and innovative technology to help bring the sport to the next level. The aim of this project was to solve these problems by applying specific aspects of automotive steering geometry and best engineering practices. Three successive prototypes were designed, with the first two prototype sets being manufactured and extensively tested. The first prototype served as a proof of concept, but suffered …

The Impact Of 3pl’S Green Initiatives On The Purchasing Of Transport And Logistics Services: An Exploratory Study, Pietro Evangelista, Maria Huge-Brodin, Karin Isaksson, Edward Sweeney

Conference papers

There is a lack of research investigating the interaction and reciprocal influences between the buyer perspective and the supplier of transport and logistics services. Studies on the buyer perspective analyse the selection criteria to buy 3PL services, while research focused on green 3PL services examine initiatives undertaken by these companies to provide more environmentally sustainable services. The objective of this paper is to fill this void through an explorative case study analysis on the environmental attitude of 3PL companies in order to derive relevant implications for buyer’s behaviour. The results provide useful guidelines to buyers for understanding awareness, initiatives as …

Toward A Technology Management Core: Defining What The Technology Manager Needs To Know, Mark Doggett, Pam Mcgee, Sophia Scott

SEAS Faculty Publications

With the increasing demands on organizations to do “more with less,” and produce acceptable market results, productivity and performance standards continually raise the expectations on competitive success. To meet these expectations, organizations should create learning opportunities that combine the application of technical management skills along with the softer skills involved in people management. Technical managers with little training or past experience with nontechnical skills often perform poorly in technical management positions (Kroecker, 2007). Because this generation lives in a highly technical environment, managers need to be proficient in dealing with knowledge workers and systems; therefore, there is a growing emphasis …

Information Quality On The World Wide Web: A User Perspective, Jaikrit Kandari

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Information Quality has emerged as an important measure for the success of Information Systems. At the same time the World Wide Web has established itself as the key infrastructure for information administration, exchange, and publication. Users are getting information from the web at the click of a button however they must filter sub-standard information before they can use quality content. Researchers have aimed to address this problem by suggesting various information quality frameworks. Research till date has seen twenty important Information Quality (IQ) frameworks emerge. These models though varied in their approach and application share a number of characteristics regarding …

Lean Inventory Management System For Boeing Missile Defense, Danielle Partridge

Industrial and Manufacturing Engineering

Lean inventory management is influential for business. One of the wastes businesses aim to reduce, using lean principles, is inventory. Inventory management provides the essential tools for eliminating extra inventory and cost that is tied up in capital.

Boeing’s Ground Based Missile Defense inventory area was failing at meeting their proprietary lean manufacturing goals. There was a need for an inventory system that included: lean principles, inventory management and user-friendly capability. The goal of this project’s inventory management database process was to minimize inventory investment while still meeting functional requirements. The deliverables for this project met the needs of Boeing’s …

An Alternative To Stretch Wrap Using Triple Bottom Line, Christian Guirola

Industrial and Manufacturing Engineering

Packaging products has always been a major sector of industries. Mass producing manufacturing companies use wooden pallets to store and transport items; these products are stacked and then secured by wrapping stretch wrap around them. The main issue with this packaging method is that millions of pounds of waste is produced. Some of the other effects include green house gas emissions during its production, limited recycling, and high packaging costs. In order to reduce the amounts of stretch wrap used by industries and distribution centers, there was a need to research and evaluate alternate methods to secure products on pallets. …