Systems Engineering Commons^™

Delayed-Bang Approach Towards More Sustainable Critical Infrastructure Risk Management, C. Ariel Pinto, Michael K. Mcshane, Abhishek S. Pathak

Finance Faculty Publications

This article describes the Delayed Bang Approach for determining the value of risk management alternatives in critical infrastructure security. The discussion includes (1) the need for sustainable risk management (2) the importance of time valuation in evaluating competing loss prevention and loss reduction alternatives, (3) the convergence of deterministic engineering economics, survivability analysis, and probabilistic analysis, and (4) hypothetical examples of the Delayed-Bang Approach and significance towards more sustainable risk management.

Post-Project Risk Perception And Systems Management Reaction, Baqer Alali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this research is to identify whether risk management in projects has any role in risk management in systems. Projects, systems, and risk management are three integral concepts in the management of various enterprises and agencies. Risk management is a common concept in systems and project processes. To avoid failures or crisis during their life cycles, projects and systems managers practice risk management. Projects and systems have well defined life cycles during which the risk is defined, controlled, and managed. Risk management is conducted in each phase of projects and systems. Projects are initiated to close certain operational …

A Decision Making Construct For Complex Situations, Van Edward Brewer

Engineering Management & Systems Engineering Theses & Dissertations

The uncertainty inherently associated with complexity challenges decision-making processes, indicating a need for a construct for decision making in complex situations. A review of the literature on systems, complexity, and paradigms indicates that such a construct must be internally consistent with well-defined philosophical foundations and further that systems and complexity (as used in complex situations) are not necessarily internally consistent with traditional philosophical foundations. Therefore, a decision making construct for complex situations requires research into different foundations. This research addresses these gaps, deriving axiological and methodological components based on a set of principles consistent with the ontology and epistemology of …

Utilizing Knowledge Transfer To Promote Management Of Countervailing Risks In Value Stream Analysis, Jeffery A. Temple

Engineering Management & Systems Engineering Theses & Dissertations

Organizations are frequently faced with the challenges of modifying and streamlining their processes by utilizing the latest process improvement techniques such as Lean Thinking. They use these techniques to allow them to better perform their organizational purposes through the elimination of waste and non-value added steps. Personnel performing these modifications need to account for potential outcomes and risks when streamlining processes. An association of knowledge transfer and experience to the identification and handling of these countervailing or alternative risks when performing Lean Thinking value stream analysis is investigated. The elements of risk management, Lean Thinking and knowledge transfer are described. …

Towards A Formal Theory Of Interoperability, Saikou Y. Diallo

Computational Modeling & Simulation Engineering Theses & Dissertations

This dissertation proposes a formal theory of interoperability that explains 1) what interoperability is as opposed to how it works, 2) how to tell whether two or more systems can interoperate and 3) how to identify whether systems are interoperating or merely exchanging bits and bytes. The research provides a formal model of data in M&S that captures all possible representations of a real or imagined thing and distinguishes between existential dependencies and transformational dependencies. Existential dependencies capture the relationships within a model while transformational dependencies capture the relationships between interactions with a model. These definitions are used to formally …

Towards A Theory Of Understanding Within Problem Situations, Jose J. Padilla

Engineering Management & Systems Engineering Theses & Dissertations

The concept of understanding is ambiguously used across areas of study, such as philosophy and cognitive sciences. This ambiguity partly originates from understanding's generally accepted definition of 'grasping' of something. Further, the concept is confounded with concurrent processes such as learning and decision making. This dissertation provides a general theory of understanding (GTU) that explains the concept of understanding unambiguously and separated from concurrent processes.

The GTU distinguishes between the process of understanding and its outcomes. Understanding, defined as a process, is the matching of knowledge, worldview, and problem. The outcome of this process is the assignment of a truth …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Risk And System-Of-Systems: Toward A Unified Concept, C. Ariel Pinto, Michael K. Mcshane, Rani Kady

Engineering Management & Systems Engineering Faculty Publications

The scope of this paper is the survey of both fundamental and most recent publications in system-of-systems, business and insurance, as well as risk analysis, modeling, and management for the purpose of better describing the concept of risk in recognition of emergence and complexity which characterizes many systems within the concern of engineering and business managers. The ultimate goal is to provide engineering and business managers the necessary perspective on the concept of risk and in its management for the next generation of sustainable systems - including various descriptions of risk and discussion of the relevance of properties of system-of-systems …

Goal Approach To Risk Scenario Identification In Systems Development, Cesar Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The scope of this paper is the exploration of fundamental issues in identifying risk scenarios during systems development. Systems development refers to a series of processes which span conceptualization, designing the architecture, obtaining the elements, and eventually integrating all these elements into the fully developed final system. For truly sustainable and green systems, identifying risk scenarios early and continuously over the system development processes is vital. This paper contains various descriptions of risk from the project (i.e. programmatic) and technical perspectives, an exploration of the generally accepted risk management process, and how these relate to systems development through system goals. …

Towards A Center For Modeling And Simulation: The Case For Jordan, Ghaith Rabadi, Hazem Kaylani, Joseph Barjis (Ed.), Murali Mohan Narasipuram (Ed.), Ghaith Rabadi (Ed.), Jolita Ralyt (Ed.), Pierluigi Plebani (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Modeling and Simulation (M&S) has recently become an important area that is pursued by many researchers and practitioners due to the role it plays in understanding complex systems and problems. We have therefore witnessed the establishment of many M&S organizations in the last two decades especially in the more developed world. Less developed countries are starting to recognize the need for such capability especially that the problems they face are not less complex. In this paper, we present a preliminary study towards a business plan for establishing a scientific center for Modeling, Analysis, Simulation and Animation in Jordan (JoSAMA) and …

Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …

Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …

A Study Of Decision Analysis Methods In Aerospace Technology Assessments, Sharon Monica Jones

Engineering Management & Systems Engineering Theses & Dissertations

Managers of aerospace technology programs and projects are faced with the challenge of making technology portfolio decisions under conditions of limited data, rapidly changing macro level factors and organizational uncertainties. To help make these technology investment decisions, some aerospace managers and analysts have used techniques from the field of decision analysis. In addition, there have been a limited number of research studies of real decision problems.

This dissertation presents the results of a non-experimental examination of the use of decision analysis methods for the assessment of aerospace technology portfolios. A web-based survey instrument was developed based on the results of …

An Analytical Framework And Model Formulation For Measuring Risk In Engineering Enterprise Systems: A Capability Portfolio Perspective, Paul Raphael Garvey

Engineering Management & Systems Engineering Theses & Dissertations

This work formulates an analytical framework and computational model for assessing risk in engineering enterprise systems. It addresses the engineering management problem of how to represent, model, and measure risk in large-scale, complex systems engineered to function in enterprise-wide environments.

The research in this dissertation extends current practice in the management of risk for traditional systems and creates new constructs and protocols for the management of risk in engineering large-scale, complex, and highly networked enterprise systems. This work advances engineering management theory and analytic practice as applied to the measurement and management of risk for enterprise systems engineered within capability …

Reconciling Discontinuities And Disruptions: The Construction Of An Integrated Typology, David Jeffery Kern

Engineering Management & Systems Engineering Theses & Dissertations

Radical innovations are often characterized by a rapid shift from one dominant design to another. The theories of discontinuous and disruptive innovation present two important and independent explanations for why these shifts occur. This research tests the usefulness of combining these two theories into a single integrated typology. First, a typology is constructed that classifies shifts in dominant designs according to the theories of discontinuous and disruptive innovation. Next, the usefulness of this typology is tested with a taxonomy derived from 100 randomly selected shifts in dominant designs from across a broad range of industries. This research reconciles the theories …

Towards The Quantitative Analysis Of The Connectivity Value Of Networked Operations, Dean Deller

Engineering Management & Systems Engineering Theses & Dissertations

While the nature of and the approach to command and control is evolving in order to meet the challenges of Information Age warfare, the essential functions that must be accomplished remain constant. One of those essential functions is the arrangement of the assets within a combat force. Certainly, the many different ways to arrange a given set of assets will have different impacts on the combat effectiveness of the force. Some arrangements will enable self-synchronization, while other arrangements will impede it. How then, should an Information Age combat force be organized in order to optimize its effectiveness?

The concept of …

Investigating The Relationship Between An It Project Manager's Emotional Intelligence And The Customer's Perception Of Success, William Jacob Lamarsh Ii

Engineering Management & Systems Engineering Theses & Dissertations

This research focuses on the intersections of Project Management, Information Technology (IT), and Emotional Intelligence. The Project Management Institute (PMI) created the Project Management Professional (PMP) certification, which is one of the most highly regarded and sought after professional certifications (Project Management Institute 2005, p. 15-18). This certification acknowledges the holder as a knowledgeable practitioner in Project Management. The purpose behind Project Management is to obtain requirements, sometimes fluid at best, and develop solutions that are traceable by schedule and cost controls. This approach allows a Project Manager to monitor and control the project through successful completion. However, the PMI …

Network Optimization Of Dynamically Complex Systems, Ramez Ahmed Shamseldin

Engineering Management & Systems Engineering Theses & Dissertations

The aim of this research is to optimize large scale network handling capabilities for large system inventories and to implement strategies for the purpose of reducing capital expenses. As computers become more and more networked, it is easier to share files among storage media. In addition, more bandwidth will be consumed by network flow because customers will be connected through networks which will transfer files and data, such as video files (MPEGn, AVI, WMV, etc.) to be watched at a customer's computer (host). Furthermore, these networks terminals will be used as mini warehouses to save files and data. Selective files …

On The Role Of Assertions For Conceptual Modeling As Enablers Of Composable Simulation Solutions, Robert Dennis King

Computational Modeling & Simulation Engineering Theses & Dissertations

This research provides a much needed systematic review of the roles that assertions play in model composability and simulation interoperability. In doing so, this research contributes a partial solution to one of the problems of model composability and simulation interoperability—namely, why do simulation systems fail to achieve the maximum level of interoperability possible? It demonstrates the importance of the assertions that are made during model development and simulation implementation, particularly as they reflect the unique viewpoint of each developer or user. It hypothesizes that it is possible to detect composability conflicts by means of a four-step process developed by the …

Implementing A Functional Iso 9001 Quality Management System In Small And Medium-Sized Enterprises, Andres Sousa-Poza, Mert Altinkilinc, Cory Searcy

Engineering Management & Systems Engineering Faculty Publications

This conceptual paper provides guidance for the implementation of a functional ISO 9001 quality management system (QMS) in small and medium-sized enterprises (SMEs). To help a SME understand its starting point, four initial states for QMS implementation are defined. Five paths for moving the QMS from the initial state to the desired state are described. To support the transition from the initial to the desired state, some key considerations in implementing a QMS in SMEs are discussed. The paper is based on site visits and implementation assistance the authors have provided to several SMEs. It is anticipated the paper will …

Sensitivity Analysis Framework For Large And Complex Simulation Models, Ghaith Rabadi, Shannon Bowling, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

In this paper, a framework for conducting Sensitivity Analysis (SA) on large and complex simulation models is introduced. The framework consists of components that are designed to make the SA a systematic process that is easy to manage and follow by simulation analysts and practitioners. Unlike local SA (one-variable-at-a-time SA), the method presented here is variance-based and it is rooted in the field of Design of Experiments (DoE) where Input Variables are varied and Output Variables are measured. Based on the DoE results, a risk scoring system is developed to identify the sensitivity of the Input Variables, and as a …

Rapid Sensor Technology: A Risk And System Complexity Analyses Of Early Detection Of Influenza-Like-Illnesses, Cesar Ariel Pinto, Ipek Bozkurt

Engineering Management & Systems Engineering Faculty Publications

The development of effective and reliable methods to defend the nation against biological terrorism remains an urgent challenge to researchers in the areas of risk, bio-defense, public health, and emergency medicine. The emerging threat of the avian flu pandemic also highlights the unpreparedness of our nation's health care system to meet a highly contagious and infectious disease outbreak. The implementation of a rapid sensor technology for early detection of influenza-like-illness provides possible opportunities, as well as problems. Bounding and defining such a complex problem is one of the first challenges this research addresses. Approaching this problem from various perspectives such …

Engineering Management Framework In Support Of Modeling & Simulation Application For Domain Specific Procurement, Thomas Guy Litwin

Engineering Management & Systems Engineering Theses & Dissertations

A strategic process is desirable for project-based organizations in order for them to be efficient and effective when developing Modeling & Simulation (M&S) systems. This thesis proposes an overarching process that combines traditional M&S and Engineering Management methodologies in a new framework to support M&S organizations during the procurement process.

This thesis proposes both a Strategic Project Management Process (SPMP) and a systems engineering process for M&S federation development projects. The systems engineering process utilizes the artifacts of Model Driven Architecture (MDA) to support building M&S federations driven by operational requirements. Detailed research of this systems engineering process revealed a …

Biology-Inspired Approach For Communal Behavior In Massively Deployed Sensor Networks, Kennie H. Jones

Computer Science Theses & Dissertations

Research in wireless sensor networks has accelerated rapidly in recent years. The promise of ubiquitous control of the physical environment opens the way for new applications that will redefine the way we live and work. Due to the small size and low cost of sensor devices, visionaries promise smart systems enabled by deployment of massive numbers of sensors working in concert. To date, most of the research effort has concentrated on forming ad hoc networks under centralized control, which is not scalable to massive deployments. This thesis proposes an alternative approach based on models inspired by biological systems and reports …

Developing A Repeatable And Reliable Methodology To Determine Return-On-Investment, Mark Cullen Nesselrode

Computational Modeling & Simulation Engineering Theses & Dissertations

The high costs of modern weapons systems, fuel, personnel, and increasing environmental awareness is forcing U.S. forces to rely on simulation for training. Further, the need to train in a robust and theater specific environment is critical to ensure operational readiness immediately upon reaching the combat theater. Finally, the rapidly changing nature of the conflicts, crises, or contingencies in which U.S. forces are involved requires a new approach to training.

The purpose of this research is to develop and demonstrate the feasibility of a methodology that can provide a reliable, consistent method for determining ROI in various forms, focusing on …

Integrating Game Technology And Discrete Event Simulation To Analyze Mass Casualty Scenarios, Jason Loveland

Computational Modeling & Simulation Engineering Theses & Dissertations

In the last 10 years, video games have become complex simulation environments with high resolution 3D graphics enabled by powerhouse rendering engines, multi-player client server networks, user friendly displays and graphical user interface , while remaining relatively inexpensive. There is a critical need for systems engineering analysis and rapid trade studies due to changes in operations caused by current events such as terrorist attacks, asymmetric threats, natural disasters, etc. Modem games provide a unique way to visualize and interact with these complex environments, scenarios, missions, and operations. A discrete event simulator (DES) provides an environment to model system architecture behavior, …

A Risk- And Fuzzy Set-Based Methodology For Advanced Concept Technology Demonstration Military Utility Assessment Design, Thomas James Meyers

Engineering Management & Systems Engineering Theses & Dissertations

The U.S. Department of Defense Advanced Concept Technology Demonstration (ACTD) and derivative, rapid acquisition programs offer timely solutions to critical military needs by assessing the utility of technologies mature enough to be fielded without application of traditional, defense system development processes. Military utility assessments (MUA) are ACTDs' most critical features, but the lack of a standard for identifying assessment criteria tailored to specific demonstrations risks poorly informed acquisition decisions and the military operations those decisions are intended to support.

The purpose of this research was to develop and deploy a methodology for identifying measures of effectiveness integral to advanced concept …

An Exploratory Study Of Iso 9001:2000 Quality Management Systems Using The Iso/Iec 15504 Architecture, Paul Richard Shimp

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this paper is to provide an exploratory study on the implementation and issues regarding Quality Management Systems as defined by ISO 9001 :2000 using the architecture of ISO/IEC 15504. The recently published ISO/IEC 15504 series of standards provides a framework to assess processes and determine levels of capability. With the use of this framework, the study will focus on the assessment and identification of problem areas requiring focus for continual improvement within an ISO 9001 :2000 quality management system.

The structure of this paper is as follows: Section 1 provides a background discussion of ISO 9001 :2000. …

A Structured Systemic Framework For Software Development, Kevin Macgregor Adams

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based framework for the analysis of software development project performance. Software development project performance is measured at the project level; that is, cost, schedule, and product quality that affect the overall project. To date, most performance improvement efforts have been focused on individual processes within the overall software development system. Making improvements to sub-elements, processes, or sub-systems without regard for the overall project is a classic misbehavior entered into by practitioners who fail to use a holistic, systemic approach. Attempts to improve sub-system behavior are at odds with The …

Towards A Diagnostic Framework For Understanding Complex Situations, José J. Padilla, Andres Sousa-Poza, Arturo Tejada, Samuel Kovacic

VMASC Publications

This paper presents a theoretical framework for the concept of understanding and how it can be used for assessing complex situations. Understanding is presented as a cognitive process on how an individual perceives and represents a complex domain based on his/her own predispositions, and how he/she selects knowledge or what may not be knowledge based on the same predispositions towards finding a set of solutions for the situation. Predispositions, in this case, are based on his/her epistemological, ontological and teleological biases while the domain is represented by irreducible and transient conditions. The final outcome is the match or mismatch of …