Operational Research Commons^™

Bridging Mission And Execution: Integrating Participatory Design In Early-Phase Mission Engineering For Stakeholder Alignment And Mission Clarity, Rafi Soule

Knowledge and Creativity Expo

This research examines mission framing during the early phase of Mission Engineering. Stakeholder interpretations diverge under ambiguity. Interoperability constraints are often not surfaced early. These conditions reduce mission clarity and weaken mission-to-system mapping readiness. The study integrates a participatory design-inspired, artifact-first workflow with RAG-enabled retrieval from a closed corpus to support evidence-grounded reasoning and traceable citations.

Phase 1 uses an online survey to establish baseline patterns in practice (N = 86). Shared understanding is positively associated with mission clarity (r = 0.60, p < 0.001). Phase 2 uses a time-bounded comparative workshop with two conditions. Expert reviewers rate mission statement quality higher for the participatory design condition (mean 3.5) than the traditional condition (mean 2.8). Technical feasibility ratings are similar across conditions. Phase 3 demonstrates RAG-enabled, closed-corpus, retrieval-supported traceability using the Referencer tool. It is reported as a proof-of-concept for evidence-grounded rationale and auditability, and as a pathway …

Optimal Control Of Queueing Systems With Error-Prone Servers, Junqi Hu, Sigrún Andradóttir, Hayriye Ayhan

Information Technology & Decision Sciences Faculty Publications

Consider a Markovian tandem line with finite intermediate buffers and an equal number of stations and servers. Servers are flexible but noncollaborative, so that a job can be processed by at most one server at any time. When a job is being processed, it can be damaged and wasted depending on the proficiency of the server. We identify the dynamic server assignment policy that maximizes the long-run average throughput of the system with two stations and two servers. We find that the optimal policy is either a single or a double threshold policy on the number of jobs in the …

An Integrated Theoretical Socio-Technical Framework For Implementing Service Robots’ Integration In Healthcare, Sujatha Alla

Engineering Management & Systems Engineering Theses & Dissertations

Healthcare workers, either clinical or non-clinical, are obligated to serve patients. However, lack of a sufficient number of professionals leads to burnout, severe stress, and, consequently, decreased quality of services. In this context, very few countries have been successful in employing service robots to perform dull, dirty, and/or dangerous tasks related to patient wellbeing/healthcare, while most countries are still skeptical about it. As robotics advances, there is an opportunity for healthcare to take advantage of this technology to reduce personnel workload and to reduce the possibility of exposure to contagious pathogens. However, healthcare is a vulnerable environment and requires critical …

Understanding The Impact Of Emergent Conflict On Communication And Team Cognition: A Multilevel Study In Engineering Teams, Francisco Cima

Engineering Management & Systems Engineering Theses & Dissertations

The development of team cognition is crucial for fostering high-performing teams. In cognitive-intensive fields like engineering, effective communication serves as a primary precursor to team knowledge development, enabling group members to effectively retrieve and utilize each other's expertise. Despite the critical role of communication, there is a lack of empirical research examining how conflict situations, which are critical emerging factors inherent to teamwork, interact with communication processes to constrain team knowledge development and utilization. This study, rooted in information processing theory, investigates how emerging conflict shapes multilevel team knowledge structures by interacting with communication processes in engineering project teams. Prior …

Electric Vehicle Routing Problem – Models And Algorithms, Hesamoddin Tahami

Engineering Management & Systems Engineering Theses & Dissertations

The transportation sector is a major greenhouse gas emitter that is heavily regulated to reduce its dependence on oil. These regulations along with the growing customer awareness of global warming have led to the investigation of new transportation problems that consider using eco-friendly vehicle fleets. Promising alternatives to traditional fleets include alternative fuel vehicles (AFVs) and electric vehicles (EVs). These twenty-first-century vehicles offer an appealing advantage of consistently reducing their environmental impact, but due to the current technology, they exhibit bothersome limitations. The short driving range along with limited charging infrastructure may consequently cause issues related to range anxiety, i.e., …

A Comparison Of Nonverbal And Paraverbal Behaviors In Simulated And Virtual Patient Encounters, Sarah Powers, Mark W. Scerbo, Matthew Pacailler, Macy Kisiel, Baillie Hirst, Ginger S. Watson, Lauren Hamel, Fred Kron

Modeling, Simulation and Visualization Student Capstone Conference

The present study assessed whether trainees display similar nonverbal and paraverbal behaviors when interacting with a simulated (SP) and virtual patient (VP). Sixty second slices of time following four interactions were rated for the presence and frequency of three nonverbal and paraverbal behaviors. Results revealed that students exhibited fewer behaviors in the VP interaction, possibly due to differences social inhibition or fidelity between the two formats.

Using Strategic Options Development And Analysis (Soda) To Understand The Simulation Accessibility Problem, Andrew J. Collins, Ying Thaviphoke, Antuela A. Tako

Engineering Management & Systems Engineering Faculty Publications

Simulation modelling is applied to a wide range of problems, including defense and healthcare. However, there is a concern within the simulation community that there is a limited use and implementation of simulation studies in practice. This suggests that despite its benefits, simulation may not be reaching its potential in making a real-world impact. The main reason for this could be that simulation tools are not widely accessible in industry. In this paper, we investigate the issues that affect simulation modelling accessibility through a workshop with simulation practitioners. We use Strategic Options Development and Analysis (SODA), a problem-structuring approach that …

Finding Core Members Of A Hedonic Game, Daniele M. Vernon-Bido

Computational Modeling & Simulation Engineering Theses & Dissertations

Agent-based modeling (ABM) is a frequently used paradigm for social simulation; however, there is little evidence of its use in strategic coalition formations. There are few models that explore coalition formation and even fewer that validate their results against an expected outcome. Cooperative game theory is often used to study strategic coalition formation but solving games involving a significant number of agents is computationally intractable. However, there is a natural linkage between ABM and the study of strategic coalition formation. A foundational feature of ABM is the interaction of agents and their environment. Coalition formation is primarily the result of …

Complex System Governance Leadership, David C. Walters

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a systems theory-based framework for leadership in governance of complex systems. Recognizing complexity and uncertainty as norms for the environments in which organizations exist encouraged researchers to suggest complexity theory, complex systems, and complex adaptive systems as appropriate for addressing these conditions. Complex System Governance (CSG), based in systems theory, management cybernetics, and governance, endeavors to provide for the design, execution and evolution of functions that provide control, communication, coordination, and integration at the metasystem level to support operations and continued system existence (viability). From a management cybernetics perspective, CSG leadership has …

Exact Algorithms For Practical Instances Of The Railcar Loading Problem At Marine Container Terminals, Manwo Ng, Dung-Ying Lin

Information Technology & Decision Sciences Faculty Publications

With the growth in global trade and its environmental footprint, sustainable modes of freight movement are increasingly important in today’s globalized world. This study focuses on on-dock rail, where the rail terminal is located within the marine container terminal. On-dock rail has in recent years become an essential mode of transportation to move containers out of congested marine container terminals. This study contributes to the literature by presenting tailored exact solution algorithms for a recently proposed optimization model to optimize the loading of double-stack trains. In particular, a 3-stage solution framework is presented for the case when rail cars have …

Human Ergonomic Simulation To Support The Design Of An Exoskeleton For Lashing/De-Lashing Operations Of Containers Cargo, Francesco Longo, Antonio Padovano, Vittorio Solina, Virginia D' Augusta, Stefan Venzl, Roberto Calbi, Michele Bartuni, Ornella Anastasi, Rafael Diaz

VMASC Publications

Lashing and de-lashing operations of containers cargo on board containerships are considered as quite strenuous activities in which operators are required to work continuously over a 6 or 8 hours shift with very limited break. This is mostly because containerships need to leave the port as soon as possible and containers loading and unloading operations must be executed with very high productivity (stay moored in a port is a totally unproductive time for a ship and a loss-making business for a shipping company). Operators performing lashing and de-lashing operations are subjected to intense ergonomic stress and uncomfortable working postures. To …

Simulation-Based Optimization: Implications Of Complex Adaptive Systems And Deep Uncertainty, Andreas Tolk

VMASC Publications

Within the modeling and simulation community, simulation-based optimization has often been successfully used to improve productivity and business processes. However, the increased importance of using simulation to better understand complex adaptive systems and address operations research questions characterized by deep uncertainty, such as the need for policy support within socio-technical systems, leads to the necessity to revisit the way simulation can be applied in this new area. Similar observations can be made for complex adaptive systems that constantly change their behavior, which is reflected in a continually changing solution space. Deep uncertainty describes problems with inadequate or incomplete information about …

Lean Application: An Assessment Of 5s On Employee Attitudes And Productivity, Nickolaos Dimitrios Karvounis

STEMPS Theses & Dissertations

This study examines the effect of the implementation of 5S on employee attitudes and productivity in an Asian based facility of a global manufacturing company. Utilizing an assessment of the 5S implementation in various areas of the facility and organizational performance data for each of those areas, a non-experimental, causal comparative approach is used to analyze the impact. The study concluded that statistically significant improvements from the implementation of 5S were found both in quality and product cost for this facility; however, the study also found statistical significance where the implementation of 5S led to a decrease in performance and …

Integration Of Blockchain Technology Into Supply Network For Resilient And Efficient Acquisition [Video], Adrian Gheorghe, Farinaz Sabz Ali Pour, Unal Tatar, Omer Faruk Keskin, Cornel Vintila, Laura Manciu

Engineering Management & Systems Engineering Faculty Publications

In the modern acquisition, it is unrealistic to consider single entities as producing and delivering a product independently. Acquisitions usually take place through supply networks. Resiliency, efficiency, and effectiveness of supply networks directly contribute to the acquisition system's resiliency, efficiency, and effectiveness. All the involved firms form a part of a supply network essential to producing the product or service. The decision-makers have to look for new methodologies for supply chain management. Blockchain technology introduces new methods of decentralization and delegation of services, which can transform supply chains and result in a more resilient, efficient, and effective supply chain. This …

A Behavioral Model For Simultaneous Event Execution In Sequential Discrete Event System Simulations, Brian David S. Dilinila

Computational Modeling & Simulation Engineering Theses & Dissertations

The sequential execution of simultaneous events in a discrete event system simulation can cause unexpected behavior in a system. Current studies have provided approaches such as applying a priority order for simultaneous events. However, this is still a problem because executing simultaneous events in sequential order can still lead to two issues of simultaneous event conflicts: the case where simultaneous events cause changes to state variables required by other simultaneous events and the case where two or more simultaneous events cause changes to the same state variables. The objective of this thesis is to develop a behavioral model as a …

Methods For Weighting Decisions To Assist Modelers And Decision Analysts: A Review Of Ratio Assignment And Approximate Techniques, Barry Ezell, Christopher J. Lynch, Patrick T. Hester

VMASC Publications

Computational models and simulations often involve representations of decision-making processes. Numerous methods exist for representing decision-making at varied resolution levels based on the objectives of the simulation and the desired level of fidelity for validation. Decision making relies on the type of decision and the criteria that is appropriate for making the decision; therefore, decision makers can reach unique decisions that meet their own needs given the same information. Accounting for personalized weighting scales can help to reflect a more realistic state for a modeled system. To this end, this article reviews and summarizes eight multi-criteria decision analysis (MCDA) techniques …

Fuzzy Cognitive Map-Based Knowledge Representation Of Hazardous Industrial Operations, Francesco Longo, Antonio Padovano, Letizia Nicoletti, Caterina Fusto, Mohaiad Elbasheer, Rafael Diaz

VMASC Publications

Hazardous industrial operations are highly stochastic, still human-dependent, and risky. Operators working in such an environment must understand the complex interrelation between several factors contributing to safe and effective operations. Therefore, being able to predict the effects of their actions on provoking or mitigating possible accidents is crucial. This study aims to utilize fuzzy cognitive maps (FCM) to model the expert’s reasoning about occupational health and safety (OHS) in confined space. This knowledge is used by operators to build their mental models. The developed FCM displays all the possible incidents of a confined space and links these incidents with all …

Human Factors, Ergonomics And Industry 4.0 In The Oil & Gas Industry: A Bibliometric Analysis, Francesco Longo, Antonio Padovano, Lucia Gazzaneo, Jessica Frangella, Rafael Diaz

VMASC Publications

Over the last few years, the Human Factors and Ergonomics (HF/E) discipline has significantly benefited from new human-centric engineered digital solutions of the 4.0 industrial age. Technologies are creating new socio-technical interactions between human and machine that minimize the risk of design-induced human errors and have largely contributed to remarkable improvements in terms of process safety, productivity, quality, and workers’ well-being. However, despite the Oil&Gas (O&G) sector is one of the most hazardous environments where human error can have severe consequences, Industry 4.0 aspects are still scarcely integrated with HF/E. This paper calls for a holistic understanding of the changing …

Developing An Artificial Intelligence Framework To Assess Shipbuilding And Repair Sub-Tier Supply Chains Risk, Rafael Diaz, Katherine Smith, Beatriz Acero, Francesco Longo, Antonio Padovano

VMASC Publications

The defense shipbuilding and repair industry is a labor-intensive sector that can be characterized by low-product volumes and high investments in which a large number of shared resources, technology, suppliers, and processes asynchronously converge into large construction projects. It is mainly organized by the execution of a complex combination of sequential and overlapping stages. While entities engaged in this large-scale endeavor are often knowledgeable about their first-tier suppliers, they usually do not have insight into the lower tiers suppliers. A sizable part of any supply chain disruption is attributable to instabilities in sub-tier suppliers. This research note conceptually delineates a …

Using Interacting Multiple Model Filters To Indicate Program Risk, Amy Sunshine Smith-Carroll

Engineering Management & Systems Engineering Theses & Dissertations

Technology development has increased exponentially. Program managers are pushed to accelerate development. There are many resources available to program managers that enable acceleration, such as: additional resources in the form of funding, people and technology. There are also negative impacts to acceleration, such as: inclusion, inexperience program managers, and communication. This research seeks to identify the limit to which a program or project can be accelerated before the program manager begins to accept an unacceptable amount of pre-determined risk.

This research will utilize estimation algorithms used by sensor systems to estimate the current and future state of objects in space. …

Human Error In Commercial Fishing Vessel Accidents: An Investigation Using The Human Factors Analysis And Classification System, Peter J. Zohorsky

Engineering Management & Systems Engineering Theses & Dissertations

The commercial fishing industry is frequently described as one of the most hazardous occupations in the United States. The objective, to maximize the catch, is routinely challenged by a variety of elements due to the environment, the vessel, the crew, and several external considerations and how they interact with each other. The analysis of fishing vessel accidents can be complicated due to the diverse nature of the industry, including the species caught, the type and size of boat that is employed, how far travelled from their homeport, and the adequacy of the support organizations ensuring safe and uninterrupted operations. This …

A Core Reference Hierarchical Primitive Ontology For Electronic Medical Records Semantics Interoperability, Ziniya Zahedi

Engineering Management & Systems Engineering Theses & Dissertations

Currently, electronic medical records (EMR) cannot be exchanged among hospitals, clinics, laboratories, pharmacies, and insurance providers or made available to patients outside of local networks. Hospital, laboratory, pharmacy, and insurance provider legacy databases can share medical data within a respective network and limited data with patients. The lack of interoperability has its roots in the historical development of electronic medical records. Two issues contribute to interoperability failure. The first is that legacy medical record databases and expert systems were designed with semantics that support only internal information exchange. The second is ontological commitment to the semantics of a particular knowledge …

Virginia Digital Shipbuilding Program (Vdsp): Building An Agile Modern Workforce To Improve Performance In The Shipbuilding And Ship Repair Industry, Joseph Peter Kosteczko, Katherine Smith, Jessica Johnson, Rafael Diaz

VMASC Publications

Industry 4.0 is the latest stage in the Industrial Revolution and is reflected in the digital transformation and use of emergent technologies including the Internet of Things, Big Data, Robotic automation of processes, 3D printing and additive manufacturing, drones and Artificial Intelligence (AI) in the manufacturing industry. The implementation of these technologies in the Shipbuilding and Ship Repair Industry is currently in a nascent stage. Considering this, there is huge potential to increase cost savings, decrease production timelines, and drive down inefficiencies in Lifecyle management of ships. However, the implementation of these Industry 4.0 technologies is hindered by a noticeable …

Engineering Management Competencies: A Framework For Present And Future Engineering Environments, Christopher Vaughn Barrett

Engineering Management & Systems Engineering Theses & Dissertations

Managing and directing engineering requires engineering management competencies. Although perspectives may differ concerning competencies for engineering management, identifying competencies can direct and improve management. The purpose of this research is to develop a framework of competencies for engineering managers using an inductive research design. Development of this engineering management competency framework involves an exploration of three primary research questions. The first question is ‘What are the current competencies for engineering managers?’ The response to this question provides a basis for the current state of competencies for engineering managers. The second research question, ‘What are future engineering management competencies based on …

Validation Risk Across Hierarchical Models, John B. Young

Computational Modeling & Simulation Engineering Theses & Dissertations

Modeling and simulation are applied in a great many methods across a variety of topics. Model developers and users alike have a professional duty to understand the complexities of the tools and methods they are used. Oftentimes, models that have been independently constructed and executed are used to inform one another for an analytic purpose and the compatibility of the models is not always addressed. In the literature, great attention has been paid to model validation. When using models constructively with one another, analysts must understand the bounds of model validity and ensure that the combination of models does not …

Short-Term Truckload Spot Rates' Prediction In Consideration Of Temporal And Between-Route Correlations, Wei Xiao, Chuan Xu, Hongling Liu, Hong Yang, Xiaobo Liu

Computational Modeling & Simulation Engineering Faculty Publications

Truckload spot rate (TSR), defined as a price offered on the spot to transport a certain cargo by using an entire truck on a target transportation line, usually price per kilometer-ton, is a key factor in shaping the freight market. In particular, the prediction of short-term TSR is of great importance to the daily operations of the trucking industry. However, existing predictive practices have been limited largely by the availability of multilateral information, such as detailed intraday TSR information. Fortunately, the emerging online freight exchange (OFEX) platforms provide unique opportunities to access and fuse more data for probing the trucking …

A Comparison Of Multi-Attribute Utility Theory, The Analytic Hierarchy Process, The Analytic Network Process, And New Hybrid Approaches For A Case Study Involving Radon, Jesse Ray Toepfer

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation focuses on the use of three new combinational hybrid approaches to solve a rational decision problem. Even though Multi-Attribute Utility Theory (MAUT) and the Analytic Hierarchy Process (AHP), and the Analytic Network Process (ANP), are all long established theories, their practical applications continue to grow and generate new knowledge. As a case study approach, there exists a knowledge gap concerning the use of these MCDM methods in the area of environmental remediation, and more especially, in situations that involve radioactive materials. From this, and as borne out by the literature review discussed herein, a problem statement is thus …

Identifying And Quantifying Personnel Skills Gaps, Martin Joseph Mckenney

Engineering Management & Systems Engineering Theses & Dissertations

One of the issues organizations face is identifying the required skills needed for a position and then evaluating whether their personnel have these skills or if there is a “skills gap”. The skills gap is the distance between the position requirements and the skills currently possessed by the worker in that position. While multiple models have been created over the years to address facets of the problem, none of them provide a comprehensive framework to clearly identify the required skills and worker qualifications and then evaluate the degree of similarity. A composite skills gap model has been developed using the …

Knowledge Sharing And Creative Confidence In Promoting Employees’ Creative Behavior, Elnaz Dario

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to investigate the influence of knowledge sharing and creative confidence on the relationship between organizations’ creative environment and employees’ creative behavior. This study individually assesses the relationship between factors from heterogeneous survey participant data and compares the result for two groups; engineers and non-engineers. A theoretical framework is adopted to explain how a creative climate stimulates an individual’s creative behavior and how this relationship is moderated and mediated by knowledge sharing and creative confidence. This is a relatively unexplored concept in the current literature. The results demonstrated that knowledge sharing and creative confidence significantly …

Optimization Of Automated Guided Vehicles (Agv) Fleet Size With Incorporation Of Battery Management, Ahmed Hamdy

Engineering Management & Systems Engineering Theses & Dissertations

An important aspect in manufacturing automation is material handling. To facilitate material handling, automated transport systems are implemented and employed. The AGV (automated guided vehicle) has become widely used for internal and external transport of materials. A critical aspect in the use of AGVs is determining the number of vehicles required for the system to meet the material handling requirements.

Several models and simulations have been applied to determine the fleet size. Most of these models and simulations do not incorporate the battery usage of the vehicles and the effect it can have on the throughput and the number of …