Operations Research, Systems Engineering and Industrial Engineering Commons^™

Planning And Optimization Of A Stochastic Multi-Phase Multi- Criteria Multi-Echelon Humanitarian Logistics Network, A B M Mainul Bari

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Disasters, may that be anthropogenic or natural, cause much havoc to vast area and population. Property and infrastructures get destroyed. People are often in need of urgent relief like dry foods and water to survive. In a country which is in the underdeveloped part of the world, relief and evacuation activities are usually carried out by local government run aid agencies. Most of the time, the local decision makers do the coordination or planning of these humanitarian activities largely based on either past experience or sometimes just pure hunch, which is neither efficient nor economic. Proper planning and coordination in …

Simulation And Optimization Of A Multi-Agent System On Physical Internet Enabled Interconnected Urban Logistics., Long Zheng

Electronic Theses and Dissertations

An urban logistics system is composed of multiple agents, e.g., shippers, carriers, and distribution centers, etc., and multi-modal networks. The structure of Physical Internet (PI) transportation network is different from current logistics practices, and simulation can effectively model a series of PI-approach scenarios. In addition to the baseline model, three more scenarios are enacted based on different characteristics: shared trucks, shared hubs, and shared flows with other less-than-truckload shipments passing through the urban area. Five performance measures, i.e., truck distance per container, mean truck time per container, lead time, CO₂ emissions, and transport mean fill rate, are included in …

Optimizing Block-Stacking Operations With Relocation, Hueon Lee

Graduate Theses and Dissertations

The focus of the dissertation is developing the optimization problem of finding the minimum-cost operational plan of block stacking with relocation as well as devising a solution procedure to solve practical-sized instances of the problem. Assuming changeable row depth instead of permanent row depth, this research is distinguished from conventional block stacking studies.

The first contribution of the dissertation is the development of the optimization problem under the assumption of deterministic demand. The problem is modeled using integer programming as a variation of the unsplittable multi-commodity flow problem. To find a good feasible solution of practical-sized instances in reasonable time, …

Insulation Sensitivity Analysis For An Optimized Fabric Shelter Off-Grid Hybrid Energy System, Jay F. Pearson, Torrey J. Wagner, Steven Schuldt

Faculty Publications

During military and disaster relief operations, connecting to an established electrical grid is rarely an option. In these situations, camps consisting of poorly insulated fabric shelters are predominantly powered by inefficient diesel generators that require frequent fuel resupply. In order to reduce the fuel demand of these generators, camps may utilize photovoltaic-battery systems. This paper presents an innovative cost-performance model capable of optimizing solar array size, battery backup system, and shelter insulation type to minimize the operating cost of powering a single fabric shelter. Model performance was evaluated using one year of insolation, weather and energy requirement data from a …

Evaluation Of Data Collection Operations For Real-Time Influenza Surveillance During An Emergency, Yuwen Gu

Dissertations

It is unclear how data collection operations for surveillance alter the disease portrayal that influenza reported trends attempt to provide during an emergency. This study developed a model that simulates the collection and testing of influenza specimens after an outbreak is declared in Michigan. It performed simulation based optimization to understand which operational factors affect the biases between the growth rates of original and observed influenza incidence trends, and to quantify the predictive power of the influenza incidence trends at different points of data collection. The results show that emergency driven high risk perception increases the reporting, which leads to …

Improving Power Network Resilience Against Threats, Hamzeh Davarikia

LSU Doctoral Dissertations

The work reported in this dissertation aims at developing a practical tool for utility transmission planners to improve the power network resilience against high-impact, low-frequency events (HILF). Such events rarely happen, but when occurred are catastrophic. In this dissertation, we studied the impact of HILF from the static and dynamic point of view and proposed the planning strategy to lower the devastating effect of the HILF.

In the static analysis, we consider the steady-state situation of the power grids and plan to protect the grid’s components, i.e., generators, buses, and transmission lines, to maximize preserving demand in a disastrous situation. …

Interventions Of Waterjet Technology In Skin Incisions, Nadi Atalla

Dissertations

This research explores the use of waterjet (WJ) technology in performing skin incisions. The study defines the analytical relationships between the skin properties and the operating parameters of the WJ which include the skin thickness, its elastic modulus, the WJ pressure, the nozzle’s orifice diameter, its stand-off distance and the traverse speed of the WJ as well as the duration of applying the WJ pressure. An analytical model is developed to measure the depth incision of the skin, the water pressure and the water velocity, while using a WJ. Systemization and optimization models that determine the optimal operating parameters levels …

Re-Org: An Online Repositioning Guidance Agent, Muralidhar Konda, Pradeep Varakantham, Aayush Saxena, Meghna Lowalekar

Research Collection School Of Computing and Information Systems

No abstract provided.

Optimization Of The Retention Rates Of Ready Mix Usa Drivers, Pruthvi Hira, Jaime Harmon, Kenneth Correa, Destiny Sessums

Senior Design Project For Engineers

Ready Mix USA, a CEMEX company, is a giant in the building materials industry, servicing the Southeastern region of the United States through various commercial and residential projects. The Atlanta Division of RMUSA currently consists of 15 operational plants in the state of Georgia with its headquarters located in Woodstock. From the years 2015 to 2018, managers at Ready Mix USA noticed a drastic increase in turnover rates of ready mix truck drivers and did not have an answer for the increasing percentages. The Continuous Improvement at RMUSA tasked the student project team from the Industrial and Systems Engineering department …

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Optimization Of Automated Guided Vehicles (Agv) Fleet Size With Incorporation Of Battery Management, Ahmed Hamdy

Engineering Management & Systems Engineering Theses & Dissertations

An important aspect in manufacturing automation is material handling. To facilitate material handling, automated transport systems are implemented and employed. The AGV (automated guided vehicle) has become widely used for internal and external transport of materials. A critical aspect in the use of AGVs is determining the number of vehicles required for the system to meet the material handling requirements.

Several models and simulations have been applied to determine the fleet size. Most of these models and simulations do not incorporate the battery usage of the vehicles and the effect it can have on the throughput and the number of …

Centroidal Voronoi Tessellation With Local Optimization, Tianyu Ye, Yiqun Wang, Dongming Yan, Junhai Yong

Journal of System Simulation

Abstract: Centroidal Voronoi tessellation is a special geometric structure, which has many applications in various fields such as geographical information system, signal processing, mesh generation/optimization, visualization and so on. Due to the highly non-convex nature of the CVT energy function, the existing methods for computing CVT have several drawbacks, which always trap into local minima. We propose generation optimization and stochastic optimization schemes for further reducing the CVT energy. Experimental results show that the proposed method improves both quality and efficiency compared to the recent approaches.

Artificial Fish Swarm And Feedback Linearization Of Flue Gas Denitration Control Based On Neural Network, Yuguang Niu, Pan Yan, Wenyuan Huang

Journal of System Simulation

Abstract: According to the present situation of SCR flue gas dentration control system in thermal power plant, an optimum proposal that control valve and concentration transmitter are added in the inlet of the SCR reactor is presented, and the corresponding control strategy is given. At the entrance of the SCR reactor, the receding horizon algorithm combined with the single neuron adaptive algorithm and the artificial fish swarm algorithm (RSNAAFS) is used to control branch valves to pretreat NO_X in the exhaust flue gas. At the outlet of the SCR reactor, the neural network based on feedback linearization algorithm (NNFL) …

Real-Time Pricing Strategy Considering The Risk Of Smart Grid, Hongbo Zhu, Gao Yan, Yeming Dai

Journal of System Simulation

Abstract: The real-time electricity price mechanism is an ideal method to adjust the power balance between supply and demand in smart grid. Its implementation has profound impacts on the users' behavior and the operation and management of electricity power grid’s safety. The users’ demand behavior plays a regulatory role in designing real-time electricity pricing strategy. Aiming at maximizing social welfare, the dynamic change of users’ aggregate demand is analyzed, which corrects the electricity risk items in online real-time risk model in the way of changing the individual user’s power fluctuations to all the users’ demand power fluctuations, and the optimization …

Optimization Of Q-Btgsid Based On Sensitivity Analysis, Shuwei Jia

Journal of System Simulation

Abstract: In order to make up for the defect that relative degree of incidence, absolute degree of incidence and synthetic degree of incidence are limited in the range of (0.5, 1], this paper attempts to improve the degree of grey incidence. A control factor of “λ” and the metric space are set up to adjust. A new model is established and its specific properties are studied. It is proved that the new model satisfies the grey incidence axioms and the range of degree of grey incidence can be extended to (0, 1]. We put forward four principles of …

Optimization Of Scheduling Rule Of Unidirectional Material Handling System With Short-Cut, Juntao Li, Kun Xia, Kise Hiroshi

Journal of System Simulation

Abstract: To decrease the interference and improve the performance of a unidirectional circulation-type material handling system on a single loop with a shortcut, the interference and scheduling problem between AGVs are studied. According to the actual situation of material handling system, the interferences of two scheduling rules (random rule and order rule) are analyzed. An optimal scheduling rule under the interference case—exchange order rule is proposed. Different scheduling rules have an influence on the interference between AGVs and then have an important effect on the efficiency of the whole system. Experiment results show that the exchange order (E-Order) rule …

A Sustainable Prototype For Renewable Energy: Optimized Prime-Power Generator Solar Array Replacement, Nathan Thomsen, Torrey J. Wagner, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote locations such as disaster relief camps, isolated arctic communities, and military forward operating bases are disconnected from traditional power grids forcing them to rely on diesel generators with a total installed capacity of 10,000 MW worldwide. The generators require a constant resupply of fuel, resulting in increased operating costs, negative environmental impacts, and challenging fuel logistics. To enhance remote site sustainability, planners can develop stand-alone photovoltaic-battery systems to replace existing prime power generators. This paper presents the development of a novel cost-performance model capable of optimizing solar array and Li-ion battery storage size by generating tradeoffs between minimizing initial …

Foundations For A Game Theoretic Framework For Agile Acquisition, Scott Rosen, Kelly Horinek, Alexander Odeh, Les Servi, Andreas Tolk

VMASC Publications

This article investigates the concept of developing a game theoretic framework that is based on the application of buyer and seller utility functions to support the bidding process in government acquisition. The results of a literature survey of utility function approaches, with potential to provide a suitable foundation to a game theory framework for acquisition, are presented. The utility function methods found most promising were further adapted and tested: the Best-Worst method, the Multi-Swing Method, and Functional Dependency for Network Analysis. To test the scalability of the approach, the Best-Worst method is applied to a larger problem to show the …

Applications Of A New Genetic Algorithm To Solve The Centralized Carrier Collaboration And Multihub Location Problem Considering Environmental Impacts, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

The Centralized Carrier Collaboration and Multi-hub Location Problem (CCCMLP) represents a strategy that small-to-medium sized less-than-truckload (LTL) carrier companies can use in order to improve their profit margins. It is a strategy that is being explored in order to make these companies more sustainable as they are forced to reinvent their processes and supply chains. In this work, I will present a metaheuristic approach to optimizing their hub establishment and routing policies in order to better their expected profit margins and reduce their environmental impacts. The study considers the costs of transportation, loading and unloading, maintenance, operations, and inventory holding …

Curricular Optimization: Solving For The Optimal Student Success Pathway, William G. Thompson-Arjona

Theses and Dissertations--Electrical and Computer Engineering

Considering the significant investment of higher education made by students and their families, graduating in a timely manner is of the utmost importance. Delay attributed to drop out or the retaking of a course adds cost and negatively affects a student’s academic progression. Considering this, it becomes paramount for institutions to focus on student success in relation to term scheduling.

Often overlooked, complexity of a course schedule may be one of the most important factors in whether or not a student successfully completes his or her degree. More often than not students entering an institution as a first time full …

Operational Squadron Scheduling, Khaled A. Almannaei

Theses and Dissertations

The 28th Operational Weather Squadron (28th OWS) is responsible for producing and disseminating mission planning and execution weather analyses and forecasts. The squadron must prepare schedules that meet the needs of their mission while dealing with real-world constraints such as time windows, task priorities, and intermittent recurring missions. The 28th OWS's manning consists of active duty, deployed in-place, reserve, civilian and contract personnel. In this research, a scheduling model and algorithm are provided as an approach to crew scheduling for the 28th Operational Weather Squadron. Scheduling in the 28th OWS is complex and can be time consuming. This model will …

Robust Allocation Of Funds For Nonstructural Flood Risk Mitigation In Coastal Louisiana, Simón Gómez Sierra, David R. Johnson, Matthew P. Shisler, Zachariah T. Richardson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coastal Louisiana is a critical economic, ecological and cultural asset, acting as a major hub for waterborne commerce, fisheries, and the petrochemical industry, and also as one of the world’s unique wetlands. Unfortunately, this rich environment is in great danger from the threat of hurricanes and storm surge flooding. Direct economic losses are estimated to average $2.7 billion per year under current conditions, and this could increase to $12 billion a year, or more, within 50 years if nothing is done. To prevent this catastrophe, Louisiana has developed a Comprehensive Master Plan for a Sustainable Coast, which plans to spend …

Developing Optimization Techniques For Logistical Tendering Using Reverse Combinatorial Auctions, Jennifer Kiser

Electronic Theses and Dissertations

In business-to-business logistical sourcing events, companies regularly use a bidding process known as tendering in the procurement of transportation services from third-party providers. Usually in the form of an auction involving a single buyer and one or more sellers, the buyer must make decisions regarding with which suppliers to partner and how to distribute the transportation lanes and volume among its suppliers; this is equivalent to solving the optimization problem commonly referred to as the Winner Determination Problem. In order to take into account the complexities inherent to the procurement problem, such as considering a supplier’s network, economies of scope, …

Sequence-Based Simulation-Optimization Framework With Application To Port Operations At Multimodal Container Terminals, Mariam Aladdin Kotachi

Engineering Management & Systems Engineering Theses & Dissertations

It is evident in previous works that operations research and mathematical algorithms can provide optimal or near-optimal solutions, whereas simulation models can aid in predicting and studying the behavior of systems over time and monitor performance under stochastic and uncertain circumstances. Given the intensive computational effort that simulation optimization methods impose, especially for large and complex systems like container terminals, a favorable approach is to reduce the search space to decrease the amount of computation.

A maritime port can consist of multiple terminals with specific functionalities and specialized equipment. A container terminal is one of several facilities in a port …

Process Improvement At "The Manse On Marsh", Kevin C. Manko

Industrial and Manufacturing Engineering

The Manse on Marsh is an independent and assisted living facility that prides itself on providing life-enriching care for the elderly. Considering that the staff is essential to supply this care and turnover rates are a constant factor, the company would like to reduce the time it takes to hire new employees by at least one week. To facilitate this goal, process flow maps are utilized to assess the current state of the hiring process and metrics are applied to support future state design decisions. After performing a value added analysis and identifying areas of waste, a total of 20 …

Vial Of Life Redesign, Andrew Scott Heim, Marisonn Manalo

Industrial and Manufacturing Engineering

Cambria Anonymous Neighbors (CAN), a nonprofit organization assisting the residences of Cambria, hopes to standardize first responder procedures and make medical information easily accessible in case of a medical emergency. Currently the container costs $3.78. CAN would like to provide 2000 containers at a lower cost. After researching materials, acrylic was found to be the best option for the container material due to its low cost and durability. A laser cutter was used to cut the acrylic pieces, and then a set of step by step instructions were created to assemble the product. To reduce the cost of acrylic, the …

Healing Alternatives Workspace Remodel, Lissandra Ilcyn, Jenifer Astrid Colmenares, Grace E. Kuffner

Industrial and Manufacturing Engineering

Healing Alternatives is an acupuncture office space located in a repurposed house in San Luis Obispo. Healing Alternatives’ current facility layout does not allow for an additional treatment room or the space to provide additional services because of the wasted space within the facility. Furthermore, patients can be disrupted by noise outside the treatment room causing a negative customer experience. The project team’s objectives are to:

o Design two layout alternatives

o Provide a time estimate for each alternative

o Provide a cost analysis of each alternative

o Implement 5s methodology on the storage room

o Provide a 2D-3D model …

Optimizing A System Of Electric Vehicle Charging Stations, Ukesh Chawal

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

There has been a significant increase in the number of electric vehicles (EVs) mainly because of the need to have a greener living. Thus, ease of access to charging facilities is a prerequisite for large scale deployment for EV. The first component of this dissertation research seeks to formulate a deterministic mixed-integer linear programming (MILP) model to optimize the system of EV charging stations, the locations of the stations and the number of slots to be opened to maximize the profit based on the user-specified cost of opening a station. Despite giving the optimal solution, the drawback of MILP formulation …

Class A Average Handle Time Standard, Stephanie Lee

Senior Design Project For Engineers

This report provides an analysis and evaluation on the Average Handle Time performed at Class A. The Universal, Shipping, International, Tracking, InfoNotice, Amazon, Field Support Group, and Preferred Customer Associates call types are evaluated in this study. An Average Handle Time Standard is created, while meeting the appropriate sample size, covering multiple site locations, at various times of the day and days of the week, and meeting corporate quality expectations. Methods of cost analysis, Six Sigma, and optimization are utilized in this study. The V-Process Model is used to verify the system. The implementation and results served as the verification …

Modular Product Architecture’S Decisions Support For Remanufacturing-Product Service System Synergy, Johnson Adebayo Fadeyi

Wayne State University Dissertations

Remanufacturing is identified as the most viable product end-of-life (EOL) management strategy. However, about 80% of manufactured products currently end up as wastes. Besides other benefits, the product service system (PSS) could curtail the main bottlenecks to remanufacturing namely quantity, quality, recovery time of used product, and negative perception of remanufactured products. Therefore, the integration of PSS and remanufacturing has been increasingly recommended as an enhanced product offering. However, an integration that is informed by mathematical analysis is missing. Meanwhile, the variables that bolster the performance of PSS and remanufacturing are substantially influenced by product development (PD) decisions. Among the …