Operations Research, Systems Engineering and Industrial Engineering Commons^™

Technical Project Management: Union Of Systems Engineering Processes With Project Management Processes, Deyaaldeen M. Abusal

Open Access Theses & Dissertations

Today, most projects in technical fields utilize project management to complete projects as planned, and some of the projects utilize system engineering to cover the project in both technically and commercially. This Thesis investigates the relationship between Project Management (PM) and Systems Engineering (SE) to determine if a suitably professional level of management and level of quality can be achieved. When studying PM and SE separately and make a comparison between both, there is much overlap between these two mature fields. The project could be planned and completed solely by either process. This study combines both fields of Project Management …

A Selective-Discrete Particle Swarm Optimization Algorithm For Solving A Class Of Orienteering Problems, Aldy Gunawan, Vincent F. Yu, Perwira Redi, Parida Jewpanya, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

This study addresses a class of NP-hard problem called the Orienteering Problem (OP), which belongs to a well-known class of vehicle routing problems. In the OP, a set of nodes that associated with a location and a score is given. The time required to travel between each pair of nodes is known in advance. The total travel time is limited by a predetermined time budget. The objective is to select a subset of nodes to be visited that maximizes the total collected score within a path. The Team OP (TOP) is an extension of OP that incorporates multiple paths. Another …

Efficient Gate System Operations For A Multipurpose Port Using Simulation Optimization, Ketki Kulkarni, Trong Khiem Tran, Hai Wang, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Port capacity is determined by three major infrastructural resources namely, berths, yards and gates. Theadvertised capacity is constrained by the least of the capacities of the three resources. While a lot ofattention has been paid to optimizing berth and yard capacities, not much attention has been given toanalyzing the gate capacity. The gates are a key node between the land-side and sea-side operations in anocean-to-cities value chain. The gate system under consideration, located at an important port in an Asiancity, is a multi-class parallel queuing system with non-homogeneous Poisson arrivals. It is hard to obtaina closed form analytic approach for …

Loading Time Flexibility In Cross-Docking Systems, Dincer Konur, Mihalis M. Golias

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this study, we investigate truck-to-door assignment problem for loading outgoing trucks in a cross-docking system with flexible handling times. Specifically, a truck's loading time depends on the number of workers assigned to the outbound door, where the truck is being loaded. An optimization problem is formulated to jointly determine the number of workers and the trucks to be loaded at each door. The resulting problem is a nonlinear integer programming model. Due to the complexity of this model, two evolutionary heuristic methods are proposed for solution. First heuristic method is based on truck assignments while the second heuristic is …

An Optimization Model For Operating Room Scheduling To Reduce Blocking Across The Perioperative Process, Amin Abedini, Wei Li, Honghan Ye

Mechanical Engineering Faculty Publications

Operating room (OR) scheduling is important. Because of increasing demand for surgical services, hospitals must provide high quality care more efficiently with limited resources. When constructing the OR schedule, it is necessary to consider the availability of downstream resources, such as intensive care unit (ICU) and post anaesthesia care unit (PACU). The unavailability of downstream resources causes blockings between every two consecutive stages. In this paper we address the master surgical schedule (MSS) problem in order to minimize blockings between two consecutive stages. First, we present a blocking minimization (BM) model for the MSS by using integer programming, based on …

Optimizing The B.O.B., Valerie N. Washington, Douglas Starzec

KSU Journey Honors College Capstones and Theses

The Kennesaw State University Department of Transportation manages the Big Owl Bus (B.O.B.). The B.O.B. has 9 routes which provide transportation around and between the Kennesaw and Marietta campuses, as well as to select off-campus apartment complexes and shopping centers. We utilized a number of methodologies to recommend improvements to the efficiency and accessibility of the B.O.B. We first used the vehicle routing problem to develop a binary integer linear programming model. This allowed us to determine a new set of routes that minimize total travel time across the routes. Next, we developed an integer non-linear programming model to assign …

On Proportionate And Truthful International Alliance Contributions: An Analysis Of Incentive Compatible Cost Sharing Mechanisms To Burden Sharing, William N. Caballero

Theses and Dissertations

Burden sharing within an international alliance is a contentious topic, especially in the current geopolitical environment, that in practice is generally imposed by a central authority's perception of its members' abilities to contribute. Instead, we propose a cost sharing mechanism such that burden shares are allocated to nations based on their honest declarations of the alliance's worth. Specifically, we develop a set of multiobjective nonlinear optimization problem formulations that respectively impose Bayesian Incentive Compatible (BIC), Strategyproof (SP), and Group Strategyproof (GSP) mechanisms based on probabilistic inspection efforts and deception penalties that are budget balanced and in the core. Any feasible …

Dynamic Repositioning To Reduce Lost Demand In Bike Sharing Systems, Supriyo Ghosh, Pradeep Varakantham, Yossiri Adulyasak, Patrick Jaillet

Research Collection School Of Computing and Information Systems

Bike Sharing Systems (BSSs) are widely adopted in major cities of the world due to concerns associated with extensive private vehicle usage, namely, increased carbon emissions, traffic congestion and usage of nonrenewable resources. In a BSS, base stations are strategically placed throughout a city and each station is stocked with a pre-determined number of bikes at the beginning of the day. Customers hire the bikes from one station and return them at another station. Due to unpredictable movements of customers hiring bikes, there is either congestion (more than required) or starvation (fewer than required) of bikes at base stations. Existing …

From Green Buildings To Green Supply Chains: An Integrated Input Output Life Cycle Assessment And Optimization Framework For Carbon Footprint Reduction Policy Making, N. Muhammad Aslaam, Gokhan Egilmez, Murat Kucukvar, M.Khurrum S. Butta

Mechanical and Industrial Engineering Faculty Publications

Purpose: This paper focuses on tracing GHG emissions across the supply chain industries associated with the U.S. residential, commercial and industrial building stock and provides optimized GHG reduction policy plans for sustainable development.

Design/Methodology/Approach: A two-step hierarchical approach is developed. Firstly, Economic Input Output-based Life Cycle Assessment (EIO-LCA) is utilized to quantify the GHG emissions associated with the U.S. residential, commercial and industrial building stock. Secondly, a mixed integer linear programming (MILP) based optimization framework is developed to identify the optimal GHG emissions’ reduction (%) for each industry across the supply chain network of the U.S. economy.

Findings: The results …

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca Gil, Pilar Pazos, Mamadou Seck, Rolando Delaguila

Engineering Management & Systems Engineering Faculty Publications

Continuous quality improvement tools have caught the attention of the Health Care Industry as a solution to process efficiency, patient safety and cost reduction. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative in overall process efficiency and patient safety in two Labor and Delivery (L+D) units of two large hospital providers. This study focuses on the application of modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output, by considering patient flow, system capacity and unit performance. The simulation models capacity profiles and patient …

Renewable Energy Systems Optimization Using Monte Carlo Simulation And Evolutionary Algorithms, Nicolas Lopez

Open Access Theses & Dissertations

This Dissertation explores the Renewable Energy Integration Problem, and proposes a Genetic Algorithm embedded with a Monte Carlo simulation to solve large instances of the problem that are impractical to solve via full enumeration. The Renewable Energy Integration Problem is defined as finding the optimum set of components to supply the electric demand to a hybrid

microgrid. The components considered are solar panels, wind turbines, diesel generators, electric batteries, connections to the power grid and converters, which can be inverters and/or rectifiers. The methodology developed is explained as well as the combinatorial formulation. In addition, 2 case studies of a …

Order Picking Strategies For Healthcare Warehouses., Ehsan Khodabandeh

Electronic Theses and Dissertations

Order picking is the process of collecting goods and items in specified quantities from storage locations, in response to customer orders. Since many labor resources are involved in this process, finding ways to make it more efficient have been a primary goal for researchers and practitioners. Determining a better allocation of products to the storage areas, finding the best route and sequence to pick multiple products, and choosing the best picking policies to minimize congestion in the aisles are just a few of many objectives regarding order picking process. Due to regulatory compliances and the chance of product spoilage, additional …

Optimization Models And Algorithms For Demand Response In Smart Grid., Guangyang Xu

Electronic Theses and Dissertations

For demand response in smart grid, a utility company wants to minimize total electricity cost and end users want to maximize their own utility. The latter is considered to consist of two parts in this research: electricity cost and convenience/comfort. We first develop a system optimal (SO) model and a user equilibrium (UE) model for the utility company and end users, respectively and compare the difference of the two. We consider users' possible preference on convenience over cost-saving under the real-time pricing in smart grid, and each user is assumed to have a preferred time window for using a particular …

Traffic Simulation Model For Port Planning And Congestion Prevention, Baoxiang Li, Kar Way Tan, Trong Khiem Tran

Research Collection School Of Computing and Information Systems

Effective management of land-side transportation provides the competitive advantage to port terminal operators in improving services and efficient use of limited space in an urban port. We present a hybrid simulation model that combines traffic-flow modeling and discrete-event simulation for land-side port planning and evaluation of traffic conditions for a number of what-if scenarios. We design our model based on a real-world case of a bulk cargo port. The problem is interesting due to complexity of heterogeneous closed-looped internal vehicles and external vehicles traveling in spaces with very limited traffic regulation (no traffic lights, no traffic wardens) and the traffic …

Improving Carbon Efficiency Through Container Size Optimization And Shipment Consolidation, Nang Laik Ma, Kar Way Tan, Edwin Lik Ming Chong

Research Collection School Of Computing and Information Systems

Purpose: Many manufacturing companies that ship goods through full container loads found themselves under-utilizing the containers and resulting in higher carbon footprint per volume shipment. One of the reasons is the choice of non-ideal container sizes for their shipments. Consolidation fills up the containers more efficiently that reduces the overall carbon footprint. The objective of this paper is to support decisions on selection of appropriate combination of container sizes and shipment consolidation for a manufacturing company. We develop two-steps model which first takes the volumes to be shipped as an input and provide the combination of container sizes required; then …

Efficient Employment Of Large Format Sensor Data Transfer Architectures, Jeffrey R. Oltmanns

Theses and Dissertations

Due to the increasing quantity of data collected by Air Force intelligence, surveillance and reconnaissance (ISR) assets and the focus on timely access to the data collected by these systems, operational data transfer network architectures have become a critical component of their employment in the intelligence production process. Efficient utilization of the provided long-haul communications component of the ISR system improves the value of the single asset to the warfighter and enables connectivity of additional assets via the data transfer network architecture. This research effort focused on the creation and implementation of a structured test design methodology based on the …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …

Self-Organizing Neural Network For Adaptive Operator Selection In Evolutionary Search, Teck Hou Teng, Stephanus Daniel Handoko, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Evolutionary Algorithm is a well-known meta-heuristics paradigm capable of providing high-quality solutions to computationally hard problems. As with the other meta-heuristics, its performance is often attributed to appropriate design choices such as the choice of crossover operators and some other parameters. In this chapter, we propose a continuous state Markov Decision Process model to select crossover operators based on the states during evolutionary search. We propose to find the operator selection policy efficiently using a self-organizing neural network, which is trained offline using randomly selected training samples. The trained neural network is then verified on test instances not used for …

The Context Of Tool Control In An Aircraft Assembly Environment Related To Productivity, Taylor Jay Sisson

KSU Journey Honors College Capstones and Theses

The aircraft industry focuses a large portion of its resources on tool control during the assembly of aircraft. Tool control is a strict process that demands time from the assembly process. This time is removed from the value-added time spent actually assembling the aircraft. A study at Lockheed Martin conducted in the Spring of 2016 is discussed that examines the time spent on tool control. Tool control is necessary in aircraft assembly to prevent tools from entering compartments of the aircraft. If such an event occurs, the tool may damage the aircraft. All aircraft assembly processes must be tool controlled, …

Mathematical Optimization Techniques For Managing Selective Catalytic Reduction For A Fleet Of Coal-Fired Power Plants, Antonio Alejandro Alanis Pena

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Major commercial electricity generation is done by burning fossil fuels out of which coal-fired power plants produce a substantial quantity of electricity worldwide. The United States has large reserves of coal, and it is cheaply available, making it a good choice for the generation of electricity on a large scale. However, one major problem associated with using coal for combustion is that it produces a group of pollutants known as nitrogen oxides (NOx). NOx are strong oxidizers and contribute to ozone formation and respiratory illness. The Environmental Protection Agency (EPA) regulates the quantity of NOx emitted to the atmosphere in …

Robust Influence Maximization, Meghna Lowalekar, Pradeep Varakantham, Akshat Kumar

Research Collection School Of Computing and Information Systems

Influence Maximization is the problem of finding a fixed size set of nodes, which will maximize the expected number of influenced nodes in a social network. The number of influenced nodes is dependent on the influence strength of edges that can be very noisy. The noise in the influence strengths can be modeled using a random noise or adversarial noise model. It has been shown that all random processes that independently affect edges of the graph can be absorbed into the activation probabilities themselves and hence random noise can be captured within the independent cascade model. On the other hand, …

Optimization Of Rfid System Coverage In A Manufacturing Environment, Scott D. Malatesta

Master's Theses

This paper compiles existing ideas, theories, and experiments across multiple disciplines to provide guidance for a company looking to implement an optimal RFID system in their production facility. The desire is to maximize the information received by the system while minimizing the cost. Four potential layouts of RFID antennas, two with overlapping antenna coverage and two with non-overlapping layouts, are first analyzed to understand the special coverage and the number of antennas required. The value of information is then quantified to determine whether higher coverage layouts are worth the additional costs associated with the higher number of antennas required. It …

Simultaneous Optimization And Sampling Of Agent Trajectories Over A Network, Hala Mostafa, Akshat Kumar, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We study the problem of optimizing the trajectories of agents moving over a network given their preferences over which nodes to visit subject to operational constraints on the network. In our running example, a theme park manager optimizes which attractions to include in a day-pass to maximize the pass’s appeal to visitors while keeping operational costs within budget. The first challenge in this combinatorial optimization problem is that it involves quantities (expected visit frequencies of each attraction) that cannot be expressed analytically, for which we use the Sample Average Approximation. The second challenge is that while sampling is typically done …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …

Shortest Path Based Decision Making Using Probabilistic Inference, Akshat Kumar

Research Collection School Of Computing and Information Systems

We present a new perspective on the classical shortest path routing (SPR) problem in graphs. We show that the SPR problem can be recast to that of probabilistic inference in a mixture of simple Bayesian networks. Maximizing the likelihood in this mixture becomes equivalent to solving the SPR problem. We develop the well known Expectation-Maximization (EM) algorithm for the SPR problem that maximizes the likelihood, and show that it does not get stuck in a locally optimal solution. Using the same probabilistic framework, we then address an NP-Hard network design problem where the goal is to repair a network of …

Approximation For Single-Channel Multi-Server Queues And Queuing Networks With Generally Distributed Inter-Arrival And Service Times, Carlos Roberto Chaves

Doctoral Dissertations

"This dissertation is divided into two papers. The first paper is related to developing a closed-form approximation for single-channel multiple-server queues with generally distributed inter-arrival and service times, which are often found in numerous settings, e.g., airports and manufacturing systems. Unfortunately, exact models for such systems require distributions for the underlying random variables. Further, data for fitting distributions is sometimes not available, and one only has access to means and variances of the underlying input random variables. Under heavy traffic, excellent approximations already exist for this purpose. In the first paper, a new approximation method for medium traffic is presented. …

Applications Of Simulation And Optimization Techniques In Optimizing Room And Pillar Mining Systems, Angelina Konadu Anani

Doctoral Dissertations

"The goal of this research was to apply simulation and optimization techniques in solving mine design and production sequencing problems in room and pillar mines (R&P). The specific objectives were to: (1) apply Discrete Event Simulation (DES) to determine the optimal width of coal R&P panels under specific mining conditions; (2) investigate if the shuttle car fleet size used to mine a particular panel width is optimal in different segments of the panel; (3) test the hypothesis that binary integer linear programming (BILP) can be used to account for mining risk in R&P long range mine production sequencing; and (4) …

Ad-Hoc Automated Teller Machine Failure Forecast And Field Service Optimization, Michelle L. F. Cheong, Ping Shung Koo, B. Chandra Babu

Research Collection School Of Computing and Information Systems

As part of its overall effort to maintain good customer service while managing operational efficiency and reducing cost, a bank in Singapore has embarked on using data and decision analytics methodologies to perform better ad-hoc ATM failure forecasting and plan the field service engineers to repair the machines. We propose using a combined Data and Decision Analytics Framework which helps the analyst to first understand the business problem by collecting, preparing and exploring data to gain business insights, before proposing what objectives and solutions can and should be done to solve the problem. This paper reports the work in analyzing …

Strasbaugh Nonconforming Report Optimization, Eden Andersen, Angela Asgekar, Rebecca Gregg

Industrial and Manufacturing Engineering

This paper strives to convey the problems and proposed solutions for Strasbaugh’s Nonconforming Report (NCR) Optimization. Strasbaugh is a world leader in silicon wafer polisher and grinder technologies. After a significant down size to the company parts they used to manufacture now have to be purchased, and many of these incoming parts do not conform to Strasbaugh’s high standards. This has led to an increase in NCRs that need to be processed, which takes up time, resources and money.

The objective therefore became to update the multi-sheet carbon copy paper system to better optimize the use of these reports and …

A Computational Intelligence Approach To System-Of-Systems Architecting Incorporating Multi-Objective Optimization, David M. Curry, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

A computational intelligence approach to system-of-systems architecting is developed using multi-objective optimization. Such an approach yields a set of optimal solutions (the Pareto set) which has both advantages and disadvantages. The primary benefit is that a set of solutions provides a picture of the optimal solution space that a single solution cannot. The primary difficulty is making use of a potentially infinite set of solutions. Therefore, a significant part of this approach is the development of a method to model the solution set with a finite number of points allowing the architect to intelligently choose a subset of optimal solutions …