Operations Research, Systems Engineering and Industrial Engineering Commons^™

Modeling Preventive Maintenance In Complex Systems, Jessica Rivas

Open Access Theses

This thesis presents an explicit consideration of the impacts of modeling decisions on the resulting maintenance planning. Incomplete data is common in maintenance planning, but is rarely considered explicitly. Robust optimization aims to minimize the impact of uncertainty--here, in contrast, I show how its impact can be explicitly quantified. Doing so allows decision makers to determine whether it is worthwhile to invest in reducing uncertainty about the system or the effect of maintenance. The thesis consists of two parts. Part I uses a case study to show how incomplete data arises and how the data can be used to derive …

A Lean Logistics Assessment Tool For Smes In The Manufacturing Sector, Diana Lorena Sanchez Ramirez

Open Access Theses

This study developed an assessment tool to rate the maturity of the current and desired states of lean logistics operations in small and medium enterprises. The tool consists of 48 best practices classified into 8 critical factors: Inventory, Transportation, Administration, Information Systems, Warehouse, Forecasting, Packaging and Supplier Network. Each of the best practices and critical factors were identified throughout a thorough literature review and comparative analysis between authors to define commonalities among them. Using gap analysis; this tool results in a SWOT matrix providing a roadmap for lean implementation. The resulting model was evaluated by subject matter experts in different …

Exploratory Study In Container Loading Embraer 190 Aircraft, Ryan H. Auyeung

Open Access Theses

Since the dawn of aviation, cargo loading on aircraft has remained virtually constant. A person and a baggage cart together have been the primary method of loading baggage on to aircraft, and this practice has virtually remained unchanged, especially for narrow body aircraft. This study explores the question of whether a loading device, designed for Embraer 190 aircraft, can increase economic efficiency by reducing aircraft turnaround times, increasing aircraft utilization and reducing work hours. In the course of designing a theoretical loading device for an Embraer 190, various literature ranging from elaborate articulating conveyor belts, to the use of LD3-45W …

The Effect Of Job Performance Aids On Quality Assurance, Erik David Fosshage

Open Access Theses

Job performance aids (JPAs) have been studied for many decades in a variety of disciplines and for many different types of tasks, yet this is the first known research experiment using JPAs in a quality assurance (QA) context. The objective of this thesis was to assess whether a JPA has an effect on the performance of a QA observer performing the concurrent dual verification technique for a basic assembly task. The JPA used in this study was a simple checklist, and the design borrows heavily from prior research on task analysis and other human factors principles. The assembly task and …

Predictive Analytics For Outpatient Appointments, Nang Laik Ma, Khataniar Seemanta, Dan Wu, Serene Seng Ying Ng

Research Collection School Of Computing and Information Systems

Healthcare is a very important industry where analytics has been applied successfully to generate insights about patients, identify bottleneck and to improve the business efficiency. In this paper, we aim to look at the patient appointment process as the hospital is experiencing high volume of ?no shows. ?No shows have a high impact on longer appointment lead time for patients, poor patient satisfaction and loss of revenue for hospital. We use data analytics to identify pattern of ?no shows, develop a statistical model to predict the probability of ?no shows and finally operationalizing the model to embed the analytics solution …

Position/Speed Sensorless Control For Permanent-Magnet Synchronous Machines, Yue Zhao

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Permanent-magnet synchronous machines (PMSMs) are widely used in industrial applications owing to their distinctive advantages, such as high efficiency, high power density, and wide constant power region. To achieve high-performance field oriented control, accurate rotor position information, which is usually measured by rotary encoders or resolvers, is indispensable. However, the use of these sensors increases the cost, size, weight, and wiring complexity and reduces the mechanical robustness and the reliability of the overall PMSM drive systems. The goal of the research for this dissertation was to develop a rotor position/speed sensorless control system with performance comparable to the sensor-based control …

Assessing The Impact Of Electronic Health Record Systems Implementation On Hospital Patient Perceptions Of Care, Katherine Sofia Palacio Salgar

Engineering Management & Systems Engineering Theses & Dissertations

The delivery of health care services has been impacted by advances in Knowledge Management Information Systems (KMIS) and Information Technology (IT). The literature reveals that Electronic Health Records Systems (EHRs) are a comprehensive KMIS. There is a wide recognition in the body of knowledge that demonstrates the potential of EHRs to transform all aspects of health care services and, in consequence, the performance of Health Care Delivery Organizations (HCDO). Authors of published research also agree that there is a need for more empirical contributions that demonstrate the impact of EHRs upon HCDO. It is argued that in most cases, studies …

An Investigation Into The Analysis Of Truncated Standard Normal Distributions Using Heuristic Techniques, John Walter Ralls

Engineering Management & Systems Engineering Theses & Dissertations

Standard normal distributions (SND) and truncated standard normal distributions (TSND) have been widely used and accepted methods to characterize the data sets in various engineering disciplines, financial industries, medical fields, management, and other mathematic and scientific applications. For engineering managers, risk managers and quality practitioners, the use of the standard normal distribution and truncated standard normal distribution have particular relevance when bounding data sets, evaluating manufacturing and assembly tolerances, and identifying measures of quality. In particular, truncated standard normal distributions are used in areas such as component assemblies to bound upper and lower process specification limits.

This dissertation presents a …

Assessing Organizational Effectiveness Through The Competing Values Framework A Data Envelopment Approach, Raghavender Macherla

Engineering Management & Systems Engineering Theses & Dissertations

This study proposes a model to diagnose organizations using the mathematical principles of data envelopment analysis (DEA) to the variables generated using competing values framework (CVF) in order to evaluate overall organizational effectiveness. The notion of organizational effectiveness is abstract and difficult to measure due to its complexity and multi-functional nature. Over the years, measurement of organizational effectiveness has remained a challenge due to the lack of agreement on the factors that should be assessed to determine effectiveness. This research is aimed at shedding some light into this topic by using data envelopment analysis as a tool to measure relative …

An Investigation Of Business Transformation Disruptors At The Military Strategic Command Level, Thomas Bock

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation contributes an empirical research on business transformation disruption in the military. Specifically, this exploratory research seeks a better understanding of disruption of business transformation and some of the factors that are likely to impact the transformation process at the military strategic command level. A lack of empirical studies existing in the literature, coupled with the continuous transformation challenges faced by military organizations, make it necessary to conduct this empirical study of business transformation disruption in the military.

This research was carried out utilizing a two-phase mixed-methods approach. The first phase included qualitative data gathering through a series of …

The Relationship Among Hfacs Levels And Analysis Of Human Factors In Unmanned And Manned Air Vehicles, Veysel Yesilbas

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation analyzes the structural relationships among the Human Factors Accident Classification System levels for unmanned air vehicle and manned air vehicle accidents and the common relationships between unmanned air vehicle and manned air vehicle accident causes. The study acquired DOD HFACS accident classification data from 347 United States Air Force Class A accident reports for the years between 2000 and 2013.

The dissertation utilized a set of analysis that is considered to contribute substantially to the respective domain of the study. The correlations found among categorical levels were applied to HFACS taxonomy based on the Reason Model via path …

Statistical And Prognostic Modeling Of Clinical Outcomes With Complex Physiologic Data, Monica A. Puertas

USF Tampa Graduate Theses and Dissertations

Laboratory tests are a primary resource for diagnosing patient diseases. However, physicians often make decisions based on a single laboratory result and have a limited perspective of the role of commonly-measured parameters in enhancing the diagnostic process. By providing a dynamic patient profile, the diagnosis could be more accurate and timely, allowing physicians to anticipate changes in the recovery trajectory and intervene more effectively.

The assessment and monitoring of the circulatory system is essential for patients in intensive care units (ICU). One component of this system is the platelet count, which is used in assessing blood clotting. However, platelet counts …

Antiviral Resistance And Dynamic Treatment And Chemoprophylaxis Of Pandemic Influenza, Sandro Paz

USF Tampa Graduate Theses and Dissertations

Public health data show the tremendous economic and societal impact of pandemic influenza in the past. Currently, the welfare of society is threatened by the lack of planning to ensure an adequate response to a pandemic. This preparation is difficult because the characteristics of the virus that would cause the pandemic are unknown, but primarily because the response requires tools to support decision-making based on scientific methods. The response to the next pandemic influenza will likely include extensive use of antiviral drugs, which will create an unprecedented selective pressure for the emergence of antiviral resistant strains. Nevertheless, the literature has …

Exploring A Method To Quantitatively Measure Design Flexibility Early In The Defense Acquisition Life Cycle, Joseph S. Kim

Theses and Dissertations

The purpose of this research was to demonstrate a methodology using an Epoch-Era Analysis to quantify and estimate the value of design flexibility early in the Department of Defense's (DOD) acquisition life cycle. This method was implemented using a possible replacement to the Air Force's fighter-trainer aircraft as a baseline and a set of future requirements that would change the baseline. An existing Cost Estimating Relationship tool was utilized in conjunction with a decision tree modeling approach to accommodate uncertain future needs. Sensitivity analysis was performed to identify model parameters with dominant effects on the recommended design strategies. The results …

Fragment Capture Simulation For Manpads Test Arena Optimization, Michael J. Garee

Theses and Dissertations

The assessment of aircraft survivability against explosive munitions is an expensive undertaking. Test articles for both aircraft and weapon are scarce due to their high costs, leading to a limited supply of test data. The development of newer, hopefully more effective weaponry and protection measures continues despite the short supply of test data. Therefore, test organizations need to explore methods for increasing the quality of test results while looking for ways to decrease the associated costs. This research focuses on the Man-Portable Air-Defense System (MANPADS) as the weapon of choice and live- re arena testing as the experimental data source. …

Improving The Air Mobility Command's Air Refueler Route Building Capabilities, Tanya E. Kannon

Theses and Dissertations

We consider the problem of routing an aircraft (receiver) from a starting location to a target and back to an ending location while maintaining a fuel level above a predetermined level during all stages of the route and avoiding threat and no-fly zones. The receiver is routed to air refueling locations to refuel as required. The development of the network requires the processing of threat and no-fly zones to create the set of nodes that includes the bases (starting and end locations), the targets, and air refueling locations in addition to the restricted zone nodes. We develop a greedy heuristic …

A Heuristic Approach To The Theater Distribution Problem, Emily K. Power

Theses and Dissertations

Analysts at USTRANSCOM are tasked with providing vehicle mixtures that will support the distribution of requirements as provided in the form of TPFDD. An integer programming model exists to search for optimal solutions to these problems, but it is fairly time consuming, and produces only one of potentially several good quality solutions. This research constructs a number of heuristic approaches to solving the TDP. Two distinct shipping methods are examined and applied through both constructive and probabilistic vehicle assignment processes. Multistart metaheuristic approaches are designed and used in conjunction with the constructive and probabilistic approaches. Random TPFDDs of size 20, …

Interface Evaluation For Open System Architectures, Joshua A. Burger

Theses and Dissertations

This research develops a deterministic interface evaluation framework (IEF) in support of the principles identified in the Modular Open Systems Approach (MOSA). Interface evaluation in weapon system development requires a Decision Analysis (DA) method capable of handling a continuously growing alternative set and functioning with limited availability of senior decision makers. Value Focused Thinking (VFT) is selected as the best method for addressing the parameters of the framework. Inputs from the Medium Altitude Unmanned Aircraft System program office are used. An initial value threshold is established to guide open interface decisions, based on assessments of 15 historical decision scenarios. Open …

Improving The Enterprise Requirements And Acquisition Model's Development Test And Evaluation Process Fidelity, Jason W. Sutherlin

Theses and Dissertations

Shrinking budgets and dynamic military conflicts have driven Department of Defense (DoD) leadership to reform how the military acquires weapon systems with the goal of decreasing program schedules and costs, while maximizing performance. With fifty years of reform, the DoD has been unable to adequately control program schedule objectives. Previous research attempted to support acquisition reforms through modeling and simulation. The Enterprise Requirements and Acquisition Model (ERAM) captures a program's progression through the Defense Acquisition Management System to gain insight into significant delays that impact program schedule and probability of completion. A past unexpected result included the insignificant impact that …

Enhanced Vehicle Beddown Approximations For The Improved Theater Distribution Model, Jonathan D. White

Theses and Dissertations

Gathering insight into the theater distribution process can be a complex task, especially when estimating potential beddown solutions. Coming up with a low cost feasible mixture of cargo vehicles that will support distribution of military personnel and goods within theater is currently a high priority for force flow analysts at USTRANSCOM. In the past, analysts used a trial and error simulation process that was iterative and time consuming. Recent research has produced the Improved Theater Distribution Model (ITDM), which presents a less time consuming, more precise method to estimate beddown allocations. Improving on this research, two linear programming methods were …

Acuta Enews March 2014 Vol. 43, No. 3

ACUTA Newsletters

In this Issue...

1 Board of Directors 2014-15

2 Learning Analytics

3 Annual Conference 2014

4 Members Celebrate Anniversaries

6 WebRTC: DTMF and 911

7 Board Report

7 lt's a Girl!

8 lnfo Links

9 Welcome New Members

9 Check lt Out

A Control-Chart Based Method For Solder Joint Crack Detection - Conference Proceeding, Jianbiao Pan

Industrial and Manufacturing Engineering

Many researchers have used different failure criteria in the published solder joint reliability studies. Since the reported time-to-failure would be different if different failure criteria were used, it would be difficult to compare the reported reliability life of solder joints from one study to another. The purpose of this study is to evaluate the effect of failure criteria on the reported thermal fatigue life and find out which failure criterion can detect failure sooner. First, the application of the control-chart based method in a thermal cycling reliability study is described. The reported time-to-failure data were then compared based on four …

Design Of Transportation Process For Band Equipment, Marissa N. Blustein, Chris M. Kaye

Industrial and Manufacturing Engineering

The following report documents the attempt to design a safe and reliable process for transporting Louder Space’s musical gear that requires minimal physical demand. Design specifications were derived from customer requirements as well as human factors principles. The transportation process was broken down into systematic process steps and standardized, making use of lean methodologies in order to reduce the number of non-value steps involved. Furthermore, a model portable storage unit for miscellaneous gear was developed to the specifications determined by the band using 3D modeling, as well as certain limiting constraints. Once the customer approved the prototype, the product was …

A Study Of The Relationship Between The Use Of Gis And Project Success In Selected Construction Organizations, Hamad Altuwaijri

Master's Theses and Doctoral Dissertations

This survey research effort investigated the relationship between 11 selected Geographic Information System (GIS) functions and three (time, cost, and quality) highway and transportation construction-project success criteria. The population included engineers and information technology professionals in the United States who worked in the highway and transportation area. The sample included members of various appropriate email groups.

No significant relationship between GIS function use and construction project success criteria (time and cost) was found. The third success criterion (customers specification−quality) was not tested because of the lack of variability of the responses. There were significant differences between organizations that focused on …

Design And Implementation Of Iso:9001 Standards At Sigma 6 Electronics, Inc., Robert Kirkpatrick, Dylan Geisen, Simon Schermerhorn

Industrial Technology and Packaging

ISO 9001 certification is a very long process that can take even the most dedicated team years to complete. For smaller companies such a process could be costly, confusing, and arduous. While many resources exist, it takes nearly the same amount of effort to tailor fit the examples as it does to create a whole new set.

The purpose of this senior project is to research examples and help fit them to a small manufacturing company, Sigma 6 Electronics, Inc. An interlinked, or combined, quality manual/procedures were chosen to aid Sigma 6 Electronics through making the documentation clear and perfectly …

Sampled Fictitious Play For Multi-Action Stochastic Dynamic Programs, Archis Ghate, Shih-Fen Cheng, Stephen Baumert, Daniel Reaume, Dushyant Sharma, Robert L. Smith

Research Collection School Of Computing and Information Systems

We introduce a class of finite-horizon dynamic optimization problems that we call multi-action stochastic dynamic programs (DPs). Their distinguishing feature is that the decision in each state is a multi-dimensional vector. These problems can in principle be solved using Bellman's backward recursion. However, complexity of this procedure grows exponentially in the dimension of the decision vectors. This is called the curse of action-space dimensionality. To overcome this computational challenge, we propose an approximation algorithm rooted in the game theoretic paradigm of Sampled Fictitious Play (SFP). SFP solves a sequence of DPs with a one-dimensional action-space, which are exponentially smaller than …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

Acuta Enews February 2014 Vol. 43, No. 2

ACUTA Newsletters

In this Issue.,.

1 Benefitting from ACUTA

2 Thanks to Fall Seminar Exhibitors dt Sponsors

3 Collaboration Is Not Automatic

4 Webinar: IAM

5 Board Report

5 Discounted Dallas Mavericks Tickets

6 Two Top Legislatiott Issues Facing Higher Ed

7 lnfo Links

8 Welcome New Members

8 Check It Out

Scheduling And Resource Allocation In Wireless Sensor Networks, Yosef Alayev

Dissertations, Theses, and Capstone Projects

In computer science and telecommunications, wireless sensor networks are an active research area. Each sensor in a wireless sensor network has some pre-defined or on demand tasks such as collecting or disseminating data. Network resources, such as broadcast channels, number of sensors, power, battery life, etc., are limited. Hence, a schedule is required to optimally allocate network resources so as to maximize some profit or minimize some cost. This thesis focuses on scheduling problems in the wireless sensor networks environment. In particular, we study three scheduling problems in the wireless sensor networks: broadcast scheduling, sensor scheduling for area monitoring, and …

Building Thinc: User Incentivization And Meeting Rescheduling For Energy Savings, Jun Young Kwak, Debarun Kar, William Haskell, Pradeep Reddy Varakantham, Milind Tambe

Research Collection School Of Computing and Information Systems

This paper presents THINC, an agent developed for saving energy in real-world commercial buildings. While previous work has presented techniques for computing energy-efficient schedules, it fails to address two issues, centered on human users, that are essential in real-world agent deployments: (i) incentivizing users for their energy saving activities and (ii) interacting with users to reschedule key “energy-consuming” meetings in a timely fashion, while handling the uncertainty in such interactions. THINC addresses these shortcomings by providing four new major contributions. First, THINC computes fair division of credits from energy savings. For this fair division, THINC provides novel algorithmic advances for …