An Examination Of Statistical Rigor Infused Into The Kc-46 Flight Test Program, Sean C. Ritter

Theses and Dissertations

The KC-46 program is bringing on-line the replacement aircraft for the KC-135. Although not a new development program, but rather a modification program, there are extensive plans for the flight testing of the KC-46. Recent DoD emphasis mandates the use of statistical design principles for DoD test and evaluation. This project will examine the planned flight test program for KC-46 and reconsider components of that program based on principles of statistical rigor. Of particular focus will be the reliability and maintainability aspects of the flight test program. Current methodology assumes a constant failure rate in all situations, implying that the …

The Moderating Effect Of Network Centrality On The Relationship Between Work Experience Variables And Organizational Commitment, Luke M. Kaspari

Theses and Dissertations

The purpose of this research was to identify the effect of an individual's network position on the relationship between work experience variables and affective commitment. This study tested three hypotheses, which were introduced through a comprehensive literature review, regarding the relationships between work experience variables and affective commitment. Research has indicated linkages between social network centrality and organizational commitment; however, the specific effects of centrality remain unclear. Therefore, this research developed and tested a moderation model to identify relationships between network centrality, affective commitment, and three work experience variables: psychological empowerment (PE), leader-member exchange (LMX), and perceived organizational support (POS). …

Aerial Refueling Simulator Validation Using Operational Experimentation And Response Surface Methods With Time Series Responses, Alexander P. Hillman

Theses and Dissertations

An important program in the Department of Defense is the KC-46 Supertanker. Dubbed the future of the Air Force's aerial refueling inventory, the KC-46 will replace dozens of ailing previous generation tanker aircraft. The Aerial Refueling Airplane Simulator Qualification document governs the methods by which Air Mobility Command validates its simulators, some of which will be KC-46 simulators in the near future. The methodology set forward in this thesis utilizes historical data of aircraft performance from similar air frames to gain statistical insight into the performance design space of the KC-46. Leveraging this insight, the methodology provides through a framework …

Vehicle Minimization For The Multimodal Pickup And Delivery Problem With Time Windows, Benjamin A . Clapp

Theses and Dissertations

The algorithm proposed here is used for heuristic solutions for the Multimodal Multiple Vehicle Routing Problem with Unloading Capacity, Pickup and Dropoff, and Time Windows, solved so as to minimize the number of vehicles used, subject to varying objective function values for each vehicle. The MVRP is simplified and split into a routing problem and a scheduling problem. The routing problem is addressed by Dijkstra's Algorithm. This generates a new network for the second stage of the algorithm. It is assumed that the shortest path is the correct path to use, and shipments each travel unimodally. The scheduling problem is …

Modeling The Impact Of The Payload Alert Communications System (Pacs) On The Accuracy Of Conjunction Analysis, Landon B. Bastow

Theses and Dissertations

The Air Force Institute of Technology (AFIT) and the Air Force Research Laboratory (AFRL) are jointly developing a system known as the Payload Alert Communications System (PACS) whose purpose is to decrease the statistical uncertainty in the location of resident space objects (RSOs). PACS is designed to augment the Joint Space Operations Center's (JSpOC) existing space object tracking capabilities which is expected to increase the accuracy of conjunction estimation. In the current PACS design, a small payload would be attached to certain RSOs prior their launch. It is envisioned that this payload would basically consist of a microcontroller, a Global …

Exploring Lean Implementation Success Factors In Job Shop, Batch Shop, And Assembly Line Manufacturing Settings, Daniela Todorova

Master's Theses and Doctoral Dissertations

This study was motivated by the differences in manufacturing settings, which provide challenges for those organizations undertaking a lean implementation. The levels of applicability of sixteen lean tools were examined in three different manufacturing settings: a job shop, a batch shop, and an assembly line. Specifically, this study explored the perceptions of managers familiar with lean regarding which lean tools were associated with better operational performance. The level of satisfaction with the lean programs in each of the three manufacturing settings was explored as well. The data were collected through a survey that was emailed to one thousand managers working …

Detachable Point Of Sale Material For Asparagus Shipper, Michael Thomas

Industrial Technology and Packaging

Gourmet Trading Company is a fresh fruit and vegetable distributor specializing in asparagus, blueberries, and blackberries. The company currently mails a 7” by 11” sign to be displayed with their asparagus which arrives in a 28 pound shipper. The signs are intended to be displayed in stores to give consumers information about the asparagus. Unfortunately, many of the signs do not get displayed since they are shipped separately. The purpose of the project is to redesign the 28 pound asparagus shipper to include a detachable point of sale sign.

A literature search was conducted to further understand the needs of …

Application Of Assignment Problem Theory To Cal Poly's Week Of Welcome Program Presentation Schedule, Kevin T. Aban

Industrial and Manufacturing Engineering

The Week of Welcome (WOW) is a part of Cal Poly’s Orientation Programs. One of the main objectives of WOW is to provide content to new students on a variety of different topics in the form of Awareness Presentations. The problem being addressed in this paper is that of assigning the orientation groups of incoming students to these Awareness Presentations so that they have a schedule that meets all of the necessary criteria. The most important of those requirements is schedule balance and flexibility for future use. This scheduling problem is solved through the use of operations research and binary …

Gyroscope Assembly Process Improvement Analysis, Ian Douglass, Juan Ulises Saucedo

Industrial and Manufacturing Engineering

The gyro is a fundamental portion of many assemblies that Company S, a directional drilling company, manufactures. The gyro assembly is a highly sensitive and complex process, and it was paramount to establish efficiency and quality guidelines to base management decisions. The first guideline succeeded by increasing throughput by means of a simulation using ProModel. Next, non-value and value added activities were identified through a value stream map. Lastly, a database was developed in order to capture high integrity quality control data, or key performance indicators, such as, throughput, first-pass inspection yields at every test performed, and defects found. This …

Implementation Of A Sustainable Project Management Methodology For Cal Poly Sae Baja, Theo Graziadei

Industrial and Manufacturing Engineering

A lack of project organization manifested through unclear team goals, rush deliveries of materials, lost tools and materials, half days of effort due to improper planning, wasted design time, missed submission dates, lack of clear job positions at competition, and low competition scores. A process was created to properly manage the team and it was implemented through the use of various templates, examples, and calculation programs. Each deliverable received feedback from this project’s stakeholders and changes were reflected in the final process. The results were as follows:

Table 1: Summary of Results

Implement a sustainable project management methodology

Each step …

The Design, Testing, And Manufacturing Of A Pin Fin Extrusion Heat Sink, Arash Michael Mira

Industrial and Manufacturing Engineering

My senior project focuses on the design, testing, and manufacturing of pin fin extrusion heat sinks that are you used to cool simple electronic applications across a multitude of markets. Without the modern day heat sink, electronics that we have become familiar with throughout our everyday lives will cease to exist. I will design these heat sinks using Solid Works 3D CAD. I will then test the heat sinks using ICEPAK CFD software, where I will model the heat sink against a 5 watt application, inside of a cabinet that models the chassis of a computer. After receiving these results, …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Evaluation And Design Of Potting Production Process Improvements For The Non-Profit Organization, Growing Grounds Farm, Maiya Avalon Bourland, Precilla Tang

Industrial and Manufacturing Engineering

This report focuses on the potting production process for the non-profit organization (NPO) Growing Grounds Farm (GGF), and aims to promote a standardized workflow system to enhance the working experience for Transitions‐Mental Health Association employees and volunteers. This project takes careful consideration into the process improvements proposed so to support the double bottom line of economic and social objectives. To address the equally important objectives, the Human Centered Design toolkit created by IDEO, specifically for third sector organizations, was integrated with the traditional Industrial Engineering design process methodology. Feasible alternatives were developed and evaluated based on the objectives. The selected …

Design Of An Automated Employee Scheduling System, Matthew Cameron, Yuriy Goldman

Industrial and Manufacturing Engineering

Many retail stores, as well as other organizations that employ a multitude of part-time employees, rely on developing schedules frequently, since the availabilities of the employees as well as the needs of the business change often. This process is often performed on a weekly basis, and is complex and time-consuming. The schedule must typically satisfy numerous requirements, including business needs, legal restrictions, and employee availability constraints. As a result, errors are common, and employee time that could have been spent on improving sales or operations is instead consumed by the scheduling task.

This project explores two solution methods for this …

Atk's Radial Airframe Forming Process Assessment, Andres Martinez

Industrial and Manufacturing Engineering

The purpose of this project was to provide ATK with a solution to increase efficiency in the R-02 radial forming center so that it could meet the increase in demand projected for the next 5 years. In addition, give ATK projected dates of when new machines would need to be implemented to be able to keep up with the demand. The system was analyzed through time studies to identify areas of possible improvement and eliminate any non-value added activities. Cycle times of each activity were used to simulate the current state of the system using ProModel software. Changes in operations …

Restaurant Design: An Industrial Engineering Perspective, Joseph Travis Spanu

Industrial and Manufacturing Engineering

The objective of this paper is to design a health food restaurant using current industrial engineering tools and practices. This includes creating a menu, determining the average gross profit per customer, determining the location, designing a 3-d layout, simulating service, and analyzing local food supply chains. Using a simplified menu and pricing quotes from a food distributor, the average gross profit per customer is estimated to be $3.50. Location is determined by comparing the predicted number of customers and the cost to rent at two different areas. A downtown location is determined to gross approximately $5,200 per month over a …

3d Object Recognition Based On A Geometrical Topology Model And Extreme Learning Machine, Rui Nian, Bo He, Amaury Lendasse

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, One Geometrical Topology Hypothesis is Present based on the Optimal Cognition Principle, and the Single-Hidden Layer Feedforward Neural Network with Extreme Learning Machine (Elm) is Used for 3d Object Recognition. It is Shown that the Proposed Approach Can Identify the Inherent Distribution and the Dependence Structure for Each 3d Object Along Multiple View Angles by Evaluating the Local Topological Segments with a Dipole Topology Model and Developing the Relevant Mathematical Criterion with Elm Algorithm. the Elm Ensemble is Then Used to Combine the Individual Single-Hidden Layer Feedforward Neural Network of Each 3d Object for Performance Improvements. the …

Acuta Enews March 2013 Vol. 42, No. 3

ACUTA Newsletters

In this issue...

1 Meet the 2014 Board

2 Connexity

3 What's on Your Desk?

3 New State/Province Coordinators

4 Second Annuall ResNet Report The App Is Back-Better than Ever!

5 Info Links

6 Members Celebrate Anniversaries

8 FCC 6 the Enterprise

9 Congratulation to Brian Yamaguchi

10 Board Report

10 Compliance Alliance: First Anniversary

11 Welcome New Members

11 Check It Out

Women's High Heel Discomfort Analysis And Prototype Solution, Kevin Blakley, Annamarie Kepple

Industrial and Manufacturing Engineering

ABSTRACT

WOMEN’S HIGH HEEL DISCOMFORT ANALYSIS AND SOLUTION

Kevin Blakley and Annamarie Kepple

Women love high heeled shoes, but this love comes at the cost of comfort. Wearing high heels causes a lot of pain and, in the long term, health complications. This project tries to overcome the problem by ultimately making high heels more comfortable. In order to do this, one must first understand the reasons that high heels are uncomfortable, such as arch angle, heel height, and the changes in walking motion. Once there is a true understanding of the factors that contribute to high heel discomfort, the …

Polyparking, Christopher Blackmer, Michael Suttie

Biomedical Engineering

The purpose of this senior project is to analyze the various options for the implementation of a parking lot information system on the California Polytechnic State University, San Luis Obispo campus. This system would involve three main components: physical counting hardware, a database and analysis organization system, and a user interface for disseminating the gathered information. The project investigates and provides commentary on various available and commonplace systems, and the benefits and drawbacks of these systems. During the course of the project, a flexible database and user-interface was developed in Microsoft Access, which will allow counter output to be gathered …

Rfid Technology Selection And Economic Justification For Healthcare Asset Tracking, Tyler Robert Peabody, Tali Freed

Master's Theses

Although Radio Frequency Identification (RFID) and Real-Time Location System (RTLS) technologies for inventory tracking have been growing in popularity, the healthcare industry has been reluctant to adopt these technologies. One of the primary reasons for this lack of enthusiasm has been the risk associated with electromagnetic interference between RFID/RTLS systems and medical equipment functionality. The other reason has been the substantial cost and complexity of implementing RFID/RTLS in healthcare organizations. In this study, we show that there are several ways to safely install RFID/RTLS systems to improve the inventory management processes of hospitals and clinics. We then analyze the inventory …

Deterioration Of Metal–Organic Framework Crystal Structure During Fabrication Of Poly(L-Lactic Acid) Mixed-Matrix Membranes, Ajay Kathuria, Mohamad G. Abiad, Rafael Auras

Industrial Technology and Packaging

Poly(l-lactic acid) (PLLA) and metal–organic framework (MOF) mixed-matrix membranes were prepared by melt extrusion of PLLA with 5% (w/w) of either activated or water-saturated Cu₃(BTC)₂ (Cu₃(C₉H₃O₆)₂(H₂O)₃·xH₂O, HKUST-1). The morphology and the stability of injection-molded samples were evaluated using thermogravimetric analysis, differential scanning calorimetry, gel permeation chromatography, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The presence of activated and saturated MOF crystals increased the cold crystallization onset temperature as compared to neat PLLA. This can be attributed to the …

Location And Capacity Modeling Of Network Interchanges, Aldo D. Fabregas

USF Tampa Graduate Theses and Dissertations

Network design decisions, especially those pertaining to urban infrastructure, are made by a central authority or network leader, and taking into consideration the network users or followers. These network decision problems are formulated as non-linear bi-level programming problems. In this work, a continuous network design problem (CNDP) and discrete network design problem (DNDP) bi-level optimization programs are proposed and solved in the context of transportation planning. The solution strategy involved reformulation and linearization as a single-level program by introducing the optimality conditions of the lower level problem into the upper level problem. For the CNDP, an alternative linearization algorithm (modified …

Acuta Enews February 2013 Vol. 42, No. 2

ACUTA Newsletters

In this issue...

1 Meeting Member Needs with Excellence

2 Remembering Luther Robb

2 New Phone System for ACUTA Office

3 Info Links

3 Look, Everybody: Lori's Back!

4 What's on Your Desk Today?

5 Why Fax over IP Fails

6 Networks and a Single Point of Failure

7 Turning Big Data into Big ldeas

7 Thanks to Journal Advertisers for 2012

8 Board Report

8 Bring 8 Winter Seminar Sessions to Your Desktop or Tablet

8 Thanks to Winter 2013 Seminar Exhibitors and Sponsors

9 Welcome New Members

9 Check It Out

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice, Frank Palisi, Kathryne Newton, Edward Sweeney

Conference papers

This research study illustrates the importance of sustainable purchasing practices for organizations in the U.S. distribution industry and answers several important questions: what is the current awareness of U.S. organizations regarding sustainable purchasing practices; to what extent are U.S. organizations evaluating, selecting, and retaining suppliers based upon sustainable purchasing practices; and to what extent are sustainable purchasing practices being implemented by the U.S. organizations under study? With an ever increasing global economy, is it critically important for organizations to put in place sustainability practices; the biggest impact organizations can make is often in an organization’s purchasing department. The researcher begins …

Where Next For Supply Chain Management?, Des Lee

Books/Book chapters

Supply chain management (SCM) has been so successful that it is largely taken for granted. Its success has been built on improving three key flows – of product, of money and of information – and on one core principle – core competence. What next for SCM? This article outlines the vulnerabilities that are embedded in modern supply chains and the unintended consequences of outsourcing activities that are not core competences. These consequences are global and have the potential to undermine past achievements. Finally, broad suggestions are made as to how these issues can be addressed and the areas on which …

Adequate Ventilation: How Is It Defined And Does It Adequately Warn Consumers?, Christopher Blankenship

Theses, Dissertations and Capstones

The purpose of this research was to clarify and define the term “adequate ventilation.” Upon looking at regulations, court cases, and other elements, it is clear that the term is inadequate to inform consumers and does not instruct consumers on how to achieve proper ventilation. To find out if consumers understand this, random persons were asked to define it. The answers were given a numerical value to show the knowledge trend. The outcome showed that most people do not understand how to achieve proper ventilation. Conclusion: Diagrams showing how to set up a room with ventilation and new instructions are …

S-Stem Scholars, A Second Generation: Support For At-Risk Upper Division And Transfer Students In Ceas, Andrew A. Kline, Betsy M. Aller

Academic Leadership Academy

Begun in 2010, the S-STEM Scholar Program increases opportunities for financially needy but academically talented students. These students:

•Are first-time, first year students •Demonstrate financial need through FAFSA applications

•Will enter a major in the College of Engineering and Applied Sciences

•Have a math ACT of 24 or above

Student awardees receive up to $3,000 per semester, and continue to receive this amount for up to eight semesters with continued academic success and progress to degree.

Preemptive Resume Priority Call Center Model With Two Classes Of Map Arrivals, Srinivas R. Chakravarthy, M. Senthil Kumar, R. Arumuganathan

Industrial & Manufacturing Engineering Publications

Generally in call centers, voice calls (say Type 1 calls) are given higher priority over e-mails (say Type 2 calls). An arriving Type 1 call has a preemptive priority over a Type 2 call in service, if any, and the preempted Type 2 call enters into a retrial buffer (of finite capacity). Any arriving call not able to get into service immediately will enter into the pool of repeated calls provided the buffer is not full; otherwise, the call is considered lost. The calls in the retrial pool are treated alike (like Type 1) and compete for service after a …

Technology Adoption In Small And Medium-Sized Logistics Providers, Pietro Evangelista, Alan Mckinnon, Edward Sweeney

Articles

Purpose - The main aim of the research is to shed light on the role of information and communication technology (ICT) in the logistics innovation process of small and medium- sized third party logistics providers (3PLs).

Design/methodology/approach – A triangulated research strategy was designed using a combination of quantitative and qualitative methods. The former involved the use of a questionnaire survey of small and medium-sized Italian 3PLs with 153 usable responses received. The latter comprised a series of focus groups and the use of seven case studies.

Findings – There is a relatively low level of ICT expenditure with few …