Operations Research, Systems Engineering and Industrial Engineering Commons^™

Agent Based Simulation Seas Evaluation Of Dodaf Architecture, Gregory V. Destefano

Theses and Dissertations

With Department of Defense (DoD) weapon systems being deeply rooted in the command, control, communications, computers, intelligence, surveillance, and reconnaissance (C4ISR) structure, it is necessary for combat models to capture C4ISR effects in order to properly assess military worth. Unlike many DoD legacy combat models, the agent based model System Effectiveness and Analysis Simulation (SEAS) is identified as having C4ISR analysis capabilities. In lieu of requirements for all new DoD C4ISR weapon systems to be placed within a DoD Architectural Framework (DoDAF), investigation of means to export data from the Framework to the combat model SEAS began. Through operational, system, …

An Investigation Of The Effects Of Correlation, Autocorrelation, And Sample Size In Classifier Fusion, Nathan J. Leap

Theses and Dissertations

This thesis extends the research found in Storm, Bauer, and Oxley, 2003. Data correlation effects and sample size effects on three classifier fusion techniques and one data fusion technique were investigated. Identification System Operating Characteristic Fusion (Haspert, 2000), the Receiver Operating Characteristic Within Fusion method (Oxley and Bauer, 2002), and a Probabilistic Neural Network were the three classifier fusion techniques; a Generalized Regression Neural Network was the data fusion technique. Correlation was injected into the data set both within a feature set (autocorrelation) and across feature sets for a variety of classification problems, and sample size was varied throughout. Total …

Modeling And Simulation Of The Military Intelligence Process, Carl R. Pawling

Theses and Dissertations

There is concern within U.S. space and intelligence organizations that the current Tasking, Processing, Exploitation, and Dissemination processes may be insufficient to support current and future Intelligence, Surveillance, and Reconnaissance systems. As part of a larger intelligence process, more detailed analysis becomes critical to determine what portions need to be improved. This analysis can be accomplished by simulation, which is appropriate due to the complexity of the process and the ability to compare variations in the process. We construct a high level model of a generalized military intelligence process based in part on the Intelligence Cycle outlined in Joint Publications. …

Recovering From A Stalled Change Initiative: A Case Of Correcting Implementation Mistakes, Ellen L. Dorey

Theses and Dissertations

Amid an age of increasing technology, innovation, and global business competition, there is no question that the pace organizational changes are introduced will increase, as well. With this pace of change, organizational leaders might find themselves short on the time and resources necessary to properly create readiness by utilizing implementation strategies. Frequently, a change initiative that is not introduced properly will meet resistance within the organization. When strong resistance is encountered, the initiative is often abandoned and replaced with some other effort. However, in some situations, the initiative can not be abandoned and implementation must continue. This research effort sought …

Policy Analysis Of Chapter 101a, Readiness And Range Preservation, Of The National Defense Authorization Act For Fiscal Year 2004, William E. Sitzabee

Theses and Dissertations

This research analyzed the United States Air Force's ability to meet the two conditions required for exemptions of critical habitat designations that are authorized under the National Defense Authorization Act for Fiscal Year 2004. The research was limited to natural resources management on United States Air Force training ranges. Department of Defense exemptions can only be achieved if two conditions exist: the management activities must meet the intent of the Endangered Species Act and conserve the threatened and endangered species identified on the lands managed under an Integrated Natural Resources Management Plan (INRMP), and the plan must ensure that there …

Acuta Enews February 2004, Vol. 33, No. 2

ACUTA Newsletters

ln This lssue

Nominate Now for 2004-05 Board of Directors

From the President................................... Walter L' Czerniak

Coverage for Wireless Phone Services ............................. Howie Frisch, UT Starcom

Semer Recertifies as CAE

Tech Talk....................... Kevin Tanzillo, Dux Public Relations

DC Update............................ Whitney Johnson, Retired, Northern Michigan Univ.

Be a Panelist at a Regional Workshop

WLNP Part 2................................. Ed Quinn, The Ohio State University

Upload Documents to ACUTA Resource Library

New Safeguards Against lD Theft

lnstitutional Excellence Award Deadline ls February 6

Post Jobs Online

Welcome New Members

Modeling And Analysis Of Hospital Facility Layout Problem, Amol Shrikrishna Padgaonkar

Theses

The optimal solution to any facility layout problem is an important aspect and a major concem as it involves significant material handling and transportation cost. The objective is to arrange the departments within the predefined facility boundaries in the way that the interaction between the functions is efficient and the overall movement cost is minimized. While facility layout problems have traditionally focused on manufacturing facilities, there has been little work on analyzing layouts for hospitals. The thesis focuses on hospital facility layout problems (HLP) to (i) minimize the movements of patients and (ii) minimize the movements of accompanying resources such …

Process For The Physical Segregation Of Minerals, Jon C. Yingling, Rajive Ganguli

Manufacturing Systems Engineering Faculty Patents

With highly heterogeneous groups or streams of minerals, physical segregation using online quality measurements is an economically important first stage of the mineral beneficiation process. Segregation enables high quality fractions of the stream to bypass processing, such as cleaning operations, thereby reducing the associated costs and avoiding the yield losses inherent in any downstream separation process. The present invention includes various methods for reliably segregating a mineral stream into at least one fraction meeting desired quality specifications while at the same time maximizing yield of that fraction.

A Docking Score Function For Estimating Ligand-Protein Interactions: Application To Acetylcholinesterase Inhibition, Jianxin Guo, Margaret M. Hurley, Jeffery B. Wright, Gerald H. Lushington

United States Army: Publications

Acetylcholinesterase (AChE) inhibition is an important research topic because of its wide range of associated health implications. A receptor-specific scoring function was developed herein for predicting binding affinities for human AChE (huAChE) inhibitors. This method entails a statistically trained weighted sum of electrostatic and van der Waals (VDW) interactions between ligands and the receptor residues. Within the 53 ligand training set, a strong correlation was found (R² = 0.89) between computed and experimental inhibition constants. Leave-oneout cross-validation indicated high predictive power (Q² = 0.72), and analysis of a separate 16-compound test set also produced very good correlation with …

A Supply Chain Management Tool For Linking Courses In Manufacturing Engineering , Daniel Waldorf, Sema E. Alptekin

Industrial and Manufacturing Engineering

A Recent Society of Manufacturing Engineers (SME) grant received by Manufacturing Engineering Program at Cal Poly has provided funds to strengthen its curricular focus on supply chain management, flexibility, business skills, quality, and process controls. New courses and laboratories are developed in electronics manufacturing, information technology, and supply chain management. A functioning supply chain environment has been developed to provide vertical integration among several courses. A software tool being developed in-house integrates the activities of the students who play the roles of customers and suppliers. Details of the various components of this comprehensive project are presented in this paper.

Selected Collaborative Problem-Solving Methods For Industry, Dr. Anthony Mark Doggett

Architectural and Manufacturing Sciences Faculty Publications

Despite the availability of a wide range of problem solving methods, individuals continue to struggle with problems. Scientists attempt to address recurring economic, social, political, and organizational problems through the expansion of knowledge and theory. ... Cause-effect relationships advance logical explanations, predict future events,and forecast consequences. Theories and thinking based on cause-effect findings become recognized science (Goldratt, 1990) and move the field of inquiry from "art" to that of disciplined examination. In problem solving, the root cause of the problem produces an undesirable effect. Any pursuit that does not seek the root cause leads only to the symptom of the …

Structure/Function Analyses Of Human Serum Paraoxonase (Hupon1) Mutants Designed From A Dfpase-Like Homology Model, David T. Yeung, Denis Josse, James D. Nicholson, Akhil Khanal, Christopher W. Mcandrew, Brian B. Bahnson, David E. Lenz, Douglas M. Cerasoli

United States Army: Publications

Human serum paraoxonase (HuPON1) is a calcium-dependent enzyme that hydrolyzes esters, including organophosphates and lactones, and exhibits anti-atherogenic properties. A few amino acids have been shown to be essential for the enzyme’s arylesterase and organophosphatase activities. Until very recently, a three-dimensional model was not available for HuPON1, so functional roles have not been assigned to those residues. Based on sequence-structure alignment studies, we have folded the amino acid sequence of HuPON1 onto the sixfold β-propeller structure of squid diisopropylfluorophosphatase (DFPase). We tested the validity of this homology model by circular dichroism (CD) spectroscopy and site-directed mutagenesis. Consistent with predictions from …

An Investigation Into The Actual Transfer Efficiency Of High Volume Low Pressure Spray Guns, William R. Zimmerle Jr.

Graduate Student Work

With the past research in pollution prevention for the painting and coatings industry the Iowa Waste Reduction Center has established a solid reputation of being unbiased and a leader in progressive thinking. At this point, no research has been preformed to specifically verify the TE of HVLP spray guns. The IWRC currently is preforming research and training to determine and improve spray technicians TE. In the past, research to verify other pollution prevention equipment has been performed. One example of such activity is the Environmental Technology Verification for the Laser Touch® Beta Model research project. This project verified that a …

Detection Of Antibodies To Squalene Iii. Naturally Occurring Antibodies To Squalene In Humans And Mice, Gary R. Matyas, Mangala Rao, Phillip R. Pittman, Robert Burge, Iris E. Robbins, Nabila M. Wassef, Brandie Thivierge, Carl R. Alving

United States Army: Publications

An ELISA-based assay is described for the measurement of antibodies to squalene (SQE) in human serum and plasma. The assay was adapted from the previously described assay for murine antibodies to SQE (J. Immunol. Methods 267 (2002) 119). Like the murine SQE antibody assay, the human antibody assay used sterile cell culture 96-well plates coated with SQE (20 nmol/well). Phosphate-buffered saline (PBS)–0.5% casein was used as both a blocking agent and dilution buffer. The assay has a high through-put capacity and is reproducible and quantitative. This assay was used to evaluate samples from three different human cohorts. The first cohort …

Overview Of Metal-On-Polyethylene, Metal-On-Metal, And Ceramic Hip Wear Mechanisms, A. Buford, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Premature failure of orthopaedic hip implants caused by multiple wear mechanisms is the primary failure mode of prosthetic hips. Wearing of the implants may lead to aseptic loosening, biological incompatibilities, and mechanical failure of the implant. In order to prevent or restrict the effects of the wear mechanisms, multiple laboratory studies are being conducted in order to determine each mechanism and its contribution to increased wear rates. This paper combines previous laboratory studies related to the wear of metal-onpolyethylene, metal-on-metal, and ceramic materials. The bulk quantity materials discussed include cobalt chromium alloys, stainless steels, zirconium oxide ceramics, and polyethylene materials …

Cost Allocation For Transmission Investment Using Agent-Based Game Theory, Jakapun Mepokee, David Lee Enke, Badrul H. Chowdhury

Engineering Management and Systems Engineering Faculty Research & Creative Works

Due to electrical power restructuring, a dramatic change has been made to the generation and transmission sectors of the power industry. Rules and legislation are continuously changing. To promote more competition, transmission has to be expanded or upgraded to remove congestion and market power. The cost allocation of new investment in transmission has to be recalculated. The socialization methods of the past have been shown to be unfair to some market and network participants. The decentralization of cost allocation must be considered. The proposed paper provides a comparison between traditional cost allocation methods and a new cost allocation method based …

A Study Of Fidelity Level And Task/Non-Task Based Testing Scenarios On The Effectiveness Of Usability Testing, Joshua R. Dolecal

Master's Theses - Daytona Beach

Advances in usability are directing developers towards creating a better and all around friendlier environment for users. Unlike when buying a physical product where you purchase it first and then experience its usability, web site usability is immediately present. So, if a site doesn't meet our needs, we as users, are quick to look elsewhere. Some research has suggested that fidelity makes no significant impact on users' ability to locate errors or problems in a web site. This paper is intends to investigate the interaction between fidelity and task vs. non-task user testing with regards to the types of problems …

Forecasting Series-Based Stock Price Data Using Direct Reinforcement Learning, H. Li, Cihan H. Dagli, David Lee Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

A significant amount of work has been done in the area of price series forecasting using soft computing techniques, most of which are based upon supervised learning. Unfortunately, there has been evidence that such models suffer from fundamental drawbacks. Given that the short-term performance of the financial forecasting architecture can be immediately measured, it is possible to integrate reinforcement learning into such applications. In this paper, we present the novel hybrid view for a financial series and critic adaptation stock price forecasting architecture using direct reinforcement. A new utility function called policies-matching ratio is also proposed. The need for the …

Decision Support Model For Construction Crew Reassignments, Angela M. Sist

Electronic Theses and Dissertations

The reassignment of crews on a construction project in response to changes occurs on a frequent basis. The factors that affect the crew reassignment decision can be myriad and most are not known with certainty. This research addresses the need for a decision support model to assist construction managers with the crew reassignment problem. The model design makes use of certainty factors in a decision tree structure. The research helped to determine the elements in the decision tree, the appropriate combination rules to use with the certainty factors, and the method for combining the certainty factors and costs to develop …

Technology Forecasting Using Data Envelopment Analysis, Oliver Lane Inman

Dissertations and Theses

The ability to anticipate future capabilities of technology products has broad implications for organizations. Technological forecasting allows management to improve resource allocation, make better staffing decisions, and more confidently plan facilities and capital expenditures. Technology forecasting may also identify potential new markets and opportunities, such as finding ways to exploit current technology beyond its originally intended purposes.

Modern technology forecasters use an array of forecasting methods to predict the future performance of a technology, such as time-series analysis, regression, stochastic methods, and simulation. These quantitative methods rely on the assumption that past behavior will continue. Shortcomings include their lack of …

An Analysis Of The Effects That Several Design Variables Have On The Accuracy And Precision Of Glass’ Delta And Hedges’ G, Joshua N. Dryer

Master's Theses - Daytona Beach

Effect size is the standardized effect that some treatment has on a sample of a population. In particular, Hedges' g and Glass delta are mean difference effect size estimators that are used to compute the effect sizes found in an experimental situation. A confidence interval is an interval placed around a point estimate that indicates the precision with which the point estimate can be made. This paper provides an explanation of the concept of effect size estimation and confidence interval calculation, the different methods that can be used to calculate effect sizes and confidence intervals, and applies these methods in …

Writing Reflective Case Studies For The Engineering Management Journal (Emj), Timothy Kotnour, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

This paper's intent is to help authors write reflective case studies for the Engineering Management Journal (EMJ). We offer a process to convert an applied research project with an organization to an EMJ manuscript. Writing a reflective case study is a process of abstracting experiences into approaches, processes, tools, challenges, and "lessons" for a broad audience of engineering managers. This paper serves as a guide for authors to write reflective case studies.

Including Organizational Cultural Parameters In Work Processes, Holly A. H. Handley, Nancy J. Heacox

Engineering Management & Systems Engineering Faculty Publications

Recent work in modeling decision-making work processes has focused on including the national culture of individual decision-makers in order to emphasize the differences in decision criteria between decision-makers of different nationalities. In addition to nationality, a decision-maker is also a member of an organization and brings this organizational culture to his role in the work process, where it may also affect his task performance. In order to represent the organizational impact on the work process, five organizational cultural parameters were identified and included in an algorithm for modeling and simulation of cultural difference in human decision-making. While the five modifiers …

Acuta Enews January 2004, Vol. 33, No. 1

ACUTA Newsletters

ln This lssue

ACUTA to Offer Regional Workshops

From ACUTA Headquarters.................. Jeri A. Semer, CAE, Executive Director

ACUTA Announces Online Press Room

Board Report.................... Carmine Piscopo, Providence College

Tech Talk.................... Kevin Tanzillo, Dux Public Relations

DC Update.............. Whitney Johnson, Retired, Northern Michigan Univ.

WLNP........................... Greg Stahl, St. Lawrence University

Thanks to Journal Advertisers for '03

Welcome New Members

Human Performance Reliability: On-Line Assessment Using Fuzzy Logic, William J. Kolarik, Jeffrey C. Woldstad, Susan Lu, Huitian Lu

Department of Industrial and Management Systems Engineering: Faculty Publications

This paper presents an on-line approach to monitoring human performance in terms of conditional reliability when one is performing a task. Unlike traditional human reliability analysis, this approach develops a dynamic model that is able to cope with constantly changing conditions that affect operator performance. A fuzzy knowledge-based assessment approach is developed in order to deal with uncertainty and subjectivity associated with human performance assessment. This technology includes three main parts/functions: (i) on-line performance monitoring; (ii) real-time performance forecasting; and (iii) performance reliability assessment. The technology is demonstrated in real-time and provides timely conditioned reliability information regarding task success/failure. In …

Thin-Film Simulation Model For Comparing Production Schedules In A Semiconductor Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Analysis of advanced manufacturing systems in any manufacturing industry requires certain level of knowledge about the system. Flexible manufacturing cells, in particular, are commonly used in most wafer fabrication to provide the ability to change product without requiring the construction of new manufacturing plant. This level of flexibility comes at a significant capital cost and, in order to achieve the maximum potential of each cell, it is essential to characterize and establish the performance of these cells in detail before a new production plan is implemented. Using state-of-the-art computer simulation and a structured modelling methodology a generic model of flexible …

Wear Mechanisms In Ceramic Hip Implants, M. Slonaker

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The wear in hip implants is one of the main causes for premature hip replacements. The wear affects the potential life of the prosthesis and subsequent removals of in-vivo implants. Therefore, the objective of this article is to review various joints that show lower wear rates and consequently higher life. Ceramics are used in hip implants and have been found to produce lower wear rates. This article discusses the advantages and disadvantages of ceramics compared to other implant materials. Different types of ceramics that are being used are reviewed in terms of the wear characteristics, debris released, and their size …

Wear Mechanisms In Ceramic Hip Implants, M. Slonaker, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The wear in hip implants is one of the main causes for premature hip replacements. The wear affects the potential life of the prosthesis and subsequent removals of in-vivo implants. Therefore, the objective of this article is to review various joints that show lower wear rates and consequently higher life. Ceramics are used in hip implants and have been found to produce lower wear rates. This article discusses the advantages and disadvantages of ceramics compared to other implant materials. Different types of ceramics that are being used are reviewed in terms of the wear characteristics, debris released, and their size …

Fee -Based Online Services : Exploring Consumers’ Willingness To Pay, L. Richard Ye, Yue Zhang, Dat-Dao Nguyen, James Chiu

Journal of International Technology and Information Management

Many online service businesses are beginning to charge fees for services that they used to provide for free. It is unclear whether consumers are ready to embrace this practice. This study explores consumer attitudes toward fee-based online services. The results of the study indicate that consumers’ willingness to pay for online services is likely to be influenced by their perceived value of convenience these services provide, and by the extent to which they utilize these services. While consumers appear more willing to pay for services that are qualitatively better than free services, there is also indication that the belief remains …

Information Systems Service Quality Measurement: The Evolution Of The Servqual Instrument, Dwayne Whitten

Journal of International Technology and Information Management

Due to the increasing service component of information technology, service quality measurement has become increasingly important as IS practitioners attempt to increase service quality to customers. The measurement of service quality in IS evolved from the research done in the marketing literature. The SERVQUAL instrument has evolved to become the most commonly used measurement instrument in both IS and marketing. Although commonly used, the SERVQUAL instrument is not without criticism. This paper describes the SERVQUAL instrument, its criticisms and support, and finally the SERVPERF instrument, a variation of the SERVQUAL instrument which is an attempt at improving upon the SERVQUAL …