Open Access. Powered by Scholars. Published by Universities.®
Operations Research, Systems Engineering and Industrial Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 181 - 210 of 375
Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering
Affecting Factors On Perceived Usefulness Of Area-Business Continuity Management For Flood Case At Industrial Areas In Thailand, Kunruthai Meechang
Affecting Factors On Perceived Usefulness Of Area-Business Continuity Management For Flood Case At Industrial Areas In Thailand, Kunruthai Meechang
Chulalongkorn University Theses and Dissertations (Chula ETD)
The 2011 Thailand floods widely affected many parts in Thailand such as households, industry and agriculture. Especially, industrial areas were massively damaged by floods. Many factories had to stop their operations. Therefore, it severely impacted economic losses. Area-Business Continuity Management (Area-BCM) is a useful system supporting company mitigate flood effectively. Before the system is implemented, opinion survey of related people in an area is important. Therefore, this research aims to investigate factors affecting Perceived Usefulness (PU) of the Area-BCM. The model is proposed based on Technology Acceptance Model and flood mitigation behavior. The analysis results categorized the respondents into four …
การคัดแยกของเสียอัตโนมัติในกระบวนการผลิตหัวอ่านเขียนด้วยวิธีการประมวลผลภาพดิจิตอลและการจดจำรูปแบบ, พลวุฒิ จตุราวิชานันท์
การคัดแยกของเสียอัตโนมัติในกระบวนการผลิตหัวอ่านเขียนด้วยวิธีการประมวลผลภาพดิจิตอลและการจดจำรูปแบบ, พลวุฒิ จตุราวิชานันท์
Chulalongkorn University Theses and Dissertations (Chula ETD)
วัตถุประสงค์ของงานวิจัยนี้ เพื่อพัฒนาอัลกอริทึมที่ใช้ในการตรวจสอบและคัดแยกคุณภาพหัวอ่านเขียนฮาร์ดดิสก์ไดร์ฟในสายการผลิต ปัจจุบันนี้กระบวนการตรวจสอบคัดแยกชิ้นงานดำเนินงานโดยพนักงานที่มีทักษะในการตรวจสอบชิ้นงาน ซึ่งขึ้นอยู่กับประสบการณ์ของพนักงานโดยตรง และทำให้เกิดความผิดพลาดจากการตัดสินโดยพนักงานที่ไม่มีทักษะในการตรวจสอบชิ้นงาน จึงมีการพัฒนาการตรวจสอบและคัดแยกคุณภาพชิ้นงาน โดยการประยุกต์ใช้กล้องถ่ายภาพและเทคนิคการประมวลผลภาพดิจิตอลเพื่อวิเคราะห์ข้อมูลภาพ โดยพิจารณาจำนวนแผ่นอิเล็กโทรด ค่าพื้นที่นูนและค่าความเยื้องศูนย์ จากนั้นใช้คุณสมบัติการวัดของขอบเขตภาพเพื่อปรับปรุงอัลกอริทึมตรวจสอบและคัดแยกคุณภาพของหัวอ่านเขียนฮาร์ดดิสก์ไดร์ฟในกระบวนการผลิต โดยทำการทดลองกับหัวอ่านเขียนทั้งหมด 30 ชิ้น เพื่อเก็บข้อมูลและ นำข้อมูลที่เก็บมาได้ไปวิเคราะห์หาค่าเป้าหมายของ 1. จำนวนแผ่นอิเล็กโทรด มีค่าเป้าหมายเท่ากับ 9 แผ่น 2. ค่าพื้นที่นูน มีค่าเป้าหมายอยู่ระหว่าง 3906 - 5590 และ 3. ค่าความเยื้องศูนย์ มีค่าเป้าหมายอยู่ระหว่าง 7.89 - 8.40 เพื่อใช้ในการฝึกอัลกอริทึม (Training) ให้เกิดการรู้จำค่าเป้าหมาย และ ขั้นตอนสุดท้ายคือการทดลองอัลกอริทึม โดยการตรวจสอบชิ้นงาน 10 ชิ้น หลังผลการทดลองพบว่า อัลกอริทึมสามารถตรวจสอบและคัดแยกคุณภาพชิ้นงานได้ถูกต้อง 100%
การปรับปรุงจำนวนพาเลทจัดเก็บของสินค้าอุปโภคบริโภคนำเข้าในคลังสินค้า, ชมพูนุช เลื่องชัยเชวง
การปรับปรุงจำนวนพาเลทจัดเก็บของสินค้าอุปโภคบริโภคนำเข้าในคลังสินค้า, ชมพูนุช เลื่องชัยเชวง
Chulalongkorn University Theses and Dissertations (Chula ETD)
หลายทศวรรษที่โรงงานผู้ผลิตได้ประยุกต์ใช้คลังสินค้าสัญญาซึ่งเป็นคลังสินค้าเฉพาะบริหารจัดการโดยผู้ให้บริการด้านโลจิสติกส์ด้วยสัญญาระยะปานกลาง วิธีการเอาท์ซอสช่วยให้โรงงานมีความยืดหยุ่นในการให้บริการโลจิสติกส์ อาทิเช่น การรวมเที่ยวขนส่ง การเปลี่ยนหีบห่อสินค้า และ การรวมสินค้า เนื่องจากค่าใช้จ่ายในการจัดการคลังสินค้าขึ้นกับ จำนวนพาเลทที่จัดเก็บ และ ความถี่ที่พาเลทถูกเคลื่อนย้าย ดังนั้นการจัดเก็บที่ไม่ได้ประสิทธิภาพและการขนถ่ายซ้ำซ้อนจะนำไปสู่ค่าใช้จ่ายค่าใช้จ่ายในการจัดการคลังสินค้าที่สูงขึ้น ดังเช่นคลังสินค้าสัญญากรณีศึกษา คลังสินค้ากรณีศึกษาประสบกับปัญหาสัดส่วนของพาเลทที่มีการจัดเรียงไม่ได้ประสิทธิภาพหรือเรียกว่า พาเลทเศษ มีปริมาณสูงขึ้น ประกอบกับปัญหาสัดส่วนของการจัดเก็บพาเลทสูงขึ้นทำให้มีพื้นที่ว่างในคลังไม่เพียงพอ จากการวิเคราะห์ข้อมูลและการระดมความคิดของกลุ่มทำงานพบหนึ่งในต้นเหตุมาจากกลุ่มสินค้านำเข้า สาเหตุของปัญหาเกิดจากขนาดพาเลทไม้มาตรฐานที่ใช้ในกลุ่มประเทศอียูมีขนาดเล็กกว่าขนาดพาเลทไม้มาตรฐานที่ใช้ประเทศไทย ดังนั้นจึงมีการเปลี่ยนรูปแบบการวางกล่องสินค้าพบพาเลทไม้ใหม่โดยมิให้เกินขอบพาเลท หลังจากการปรับรูปแบบการเรียงกล่องสินค้าใหม่แล้วจะช่วยลดจำนวนพาเลทที่เรียงไม่ได้ประสิทธิภาพและสามารถช่วยลดค่าใช้จ่ายด้านค่าเช่าพาเลทกับค่าเคลื่อนย้ายพาเลทของคลังสินค้าได้เท่ากับ 24.29% ของปี Y0 และ 21.65% ของปี Y1 โดยไม่ส่งผลกระทบต่อค่าใช้จ่ายด้านแรงงาน
การกำหนดนโยบายการสั่งเติมพัสดุชิ้นส่วนหลักในงานประกอบตามคำสั่งซื้อ ในการผลิตระบบทำน้ำเย็น, ทิพวัลย์ นาสวรรค์
การกำหนดนโยบายการสั่งเติมพัสดุชิ้นส่วนหลักในงานประกอบตามคำสั่งซื้อ ในการผลิตระบบทำน้ำเย็น, ทิพวัลย์ นาสวรรค์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยฉบับนี้มีวัตถุประสงค์เพื่อกำหนดนโยบายการสั่งเติมพัสดุชิ้นส่วนหลักในงานผลิตตามคำสั่งซื้อ (Assemble-to-Order : ATO) ในโรงงานผลิตเครื่องทำระบบน้ำเย็น ซึ่งชิ้นส่วนหลักประกอบไปด้วย พัดลมระบายความร้อน 4 ชนิด และแผงแลกเปลี่ยนความร้อน 13 ชนิด เพื่อตอบสนองความต้องการอันหลากหลาย ชิ้นส่วนเหล่านี้ที่มีระยะเวลานำที่ยาวนาน ส่งผลให้มีระดับพัสดุมากเกินไป ทั้งการสั่งเติมพัสดุนั้นยังพึ่งพาประสบการณ์บุคคลเป็นส่วนใหญ่ และค่าใช้จ่ายในการสั่งซื้อมีค่าน้อยมากเมื่อเปรียบเทียบกับราคาของชิ้นส่วน งานวิจัยจึงมุ่งเน้นในการกำหนดปริมาณพัสดุคงคลังเป้าหมายและปริมาณการสั่งเติมของชิ้นหลักให้สอดคล้องกับความต้องการที่เกิดขึ้น และได้มีนำเสนอแนวคิดของระบบสนับสนุนการตัดสินใจ (DSS) สำหรับงานสั่งเติมพัสดุ จากการวิเคราะห์ความต้องการรายเดือนของชิ้นส่วนเหล่านี้การกระจายตัวของข้อมูลมีการแจกแจงแบบไม่ปกติ การทดสอบสถิติแบบนอนพาราเมตริกจึงถูกนำมาประยุกต์ใช้เพื่ออธิบาย และหาค่าเฉลี่ยรายเดือนของความต้องการ เพื่อนำไปกำหนดค่าระดับพัสดุคงคลังเป้าหมายที่ระดับการให้บริการลูกค้า (Customer Service Level ) 95% รวมถึงการระบุพัสดุสำรอง (Safety Stock) และการคำนวนค่า Available-to-Promise (ATP) หรือจำนวนพัสดุที่สามารถขายลูกค้าได้เป็นหนึ่งในตัวตัดสินใจการสั่งเติม การทดสอบทำโดยการนำนโยบายพัสดุคงคลังใหม่ที่กำหนดขึ้น จำลองการทดสอบกับข้อมูลเดิมของปี 2561และข้อมูลความต้องการใหม่ในปี 2562 พบว่านโยบายใหม่มีระดับพัสดุคงคลังซึ่งคิดเป็นค่าเฉพาะวัตถุดิบหรือชิ้นส่วนหลักอย่างเดียว ณ สิ้นปี 2562 ลดลง 42.4 % หรือคิดเป็น 396,809 ดอลลาร์สหรัฐ นอกจากนี้จำนวนพัสดุคงคลังของชิ้นส่วนหลักก็ลดลง 37 % และระดับการให้บริการไม่ลดลงเนื่องจากไม่เกิดภาวะการขาดแคลนพัสดุเกิดขึ้น
การวางแผนการจัดหาเหล็กแผ่นโดยพิจารณาร่วมกับการใช้ประโยชน์เศษเหล็กในการผลิตชิ้นส่วนรถบรรทุก, กฤติยา อึ่งวรากร
การวางแผนการจัดหาเหล็กแผ่นโดยพิจารณาร่วมกับการใช้ประโยชน์เศษเหล็กในการผลิตชิ้นส่วนรถบรรทุก, กฤติยา อึ่งวรากร
Chulalongkorn University Theses and Dissertations (Chula ETD)
เนื่องจากการผลิตรถบรรทุกของโรงงานกรณีศึกษามีกระบวนการตัดเหล็กม้วนโดยใช้การปั๊มขึ้นรูปกรอบประตูรถบรรทุก ซึ่งทำให้เกิดเศษเหล็กเหลือใช้เป็นจำนวนมาก โรงงานจึงมีแนวคิดในการสร้างมูลค่าเพิ่มให้แก่เศษเหล็ก โดยการใช้เศษเหล็กเป็นวัตถุดิบในการผลิตชิ้นส่วนรถบรรทุกจำนวน 7 รายการชิ้นส่วน เพื่อลดต้นทุนวัตถุดิบในการผลิต งานวิจัยนี้มีวัตถุประสงค์เพื่อนำเสนอวิธีการวางแผนการจัดหาเหล็กแผ่นโดยพิจารณาร่วมกับการใช้ประโยชน์เศษเหล็กในการผลิตชิ้นส่วนรถบรรทุกโดยการประยุกต์ใช้การวัดความแม่นยำของข้อมูลด้วยวิธี MAD ในการลดทอนความคลาดเคลื่อนของการพยากรณ์ความต้องการชิ้นส่วนรถบรรทุกที่มีการปรับเปลี่ยนไปจนกว่าจะถึงกำหนดการส่งมอบ การศึกษาต้นทุนที่เกิดจากกิจกรรมในกระบวนการตัดเหล็กเพื่อกำหนดเกณฑ์การตัดสินใจ การใช้โปรแกรมเชิงเส้นในการจัดสรรเศษเหล็กให้แก่ชิ้นส่วนรถบรรทุกต่าง ๆ สำหรับใช้เป็นวัตถุดิบเพื่อให้เกิดการลดต้นทุนการผลิตชิ้นส่วนสูงสุด การประมาณค่าความเบี่ยงเบนของค่าสัมบูรณ์ของความคลาดเคลื่อนเพื่อกำหนดพัสดุคงคลัง และการประยุกต์ใช้แบบจำลองระดับคงคลังเป้าหมาย เพื่อหาจำนวนเหล็กแผ่นที่จะต้องจัดหาจากผู้ขายตามระยะเวลาที่กำหนด เมื่อดำเนินทดสอบด้วยข้อมูลจริงตั้งแต่ ก.ย.2561 – เม.ย.2562 พบว่าโรงงานลดต้นทุนในการจัดหาเหล็กแผ่นลงได้ 19% คิดเป็นมูลค่า 866, 452 บาท นอกจากการจัดสรรเศษเหล็กเพื่อนำมาใช้เป็นวัตถุดิบแล้วนั้นยังสามารถลดความคลาดเคลื่อนของข้อมูลความต้องการชิ้นส่วนรถบรรทุก 5 % และการปรับปรุงวิธีการคำนวณจำนวนเหล็กแผ่นเพื่อใช้เป็นพัสดุคงคลังลดลงได้ 65 % โดยยังคงตอบสนองต่อลูกค้าที่ระดับให้บริการที่ 95%
Process Improvement Of Housing Loan Product In Thailand Commercial Bank, Araya Santitrakulvech
Process Improvement Of Housing Loan Product In Thailand Commercial Bank, Araya Santitrakulvech
Chulalongkorn University Theses and Dissertations (Chula ETD)
According to digital disruption has become key factor that stimulates changing in business nowadays including banking business. To respond through rapid change in customer behavior and become competitive among rivals, this research is aimed to improve business process of housing loan product in one of commercial banks in Thailand which is mainly operated in manual operation and paper process and believed to be main symptoms of bottleneck in lending process. The main objective of this research is to reduce lead time of housing loan business by going through the detail of business process to reveal wastes or non-value-added activities using …
A Study Of Price Elasticity Of Demand And Its Application In First Mile/Last Mile Service Collaboration Between Mass Transit And Ride Sharing Providers, Voragorn Warapiankul
A Study Of Price Elasticity Of Demand And Its Application In First Mile/Last Mile Service Collaboration Between Mass Transit And Ride Sharing Providers, Voragorn Warapiankul
Chulalongkorn University Theses and Dissertations (Chula ETD)
Since today, Bangkok faces the big pollution and low mobility. One main reason is Bangkok people tend to travel by automobiles instead of the transit. The main problem of Bangkok transit especially Bangkok metro is the low accessibility to travel to/from the transit nodes and between nodes or as called First Mile Last Mile problem. Moreover, Bangkok metro transit fare is claimed that is too expensive compared to the cost of living and minimum wages in Bangkok. This research aims to study the price elasticity of demand for Bangkok metro which is the indicator of fare demand management in Bangkok …
การประยุกต์ใช้ตะกอนจากอุตสาหกรรมเหมืองแร่หินเพื่อการผลิตอิฐเผา, ณัฐวุฒิ ธงชัย
การประยุกต์ใช้ตะกอนจากอุตสาหกรรมเหมืองแร่หินเพื่อการผลิตอิฐเผา, ณัฐวุฒิ ธงชัย
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์เพื่อทำการวิเคราะห์หาสัดส่วนดินตะกอนจากอุตสาหกรรมเหมืองหินไปขึ้นรูปผลิตภัณฑ์เป็นอิฐดินตะกอนโดยใช้ดินเหนียวเป็นส่วนผสม งานวิจัยเริ่มจาก1) วิเคราะห์คุณสมบัติของตะกอนเพื่อหาองค์ประกอบของแร่ธาตุและสารประกอบที่พบในดินตะกอน 2) ทำการออกแบบการทดลองเพื่อพัฒนาผลิตภัณฑ์อิฐดินตะกอนจากเหมืองหิน โดยมีตัวแปรต้นได้แก่ สัดส่วนผสมระหว่างตะกอนจากเหมืองและดินเหนียวตั้งแต่ร้อยละ 40 ถึง80 โดยน้ำหนัก และเผาที่อุณหภูมิ 900, 1000 และ1100 องศาเซลเซียส 3) ทำการทดสอบคุณสมบัติเชิงกลและเชิงกายภาพของผลิตภัณฑ์แล้วสรุปผลงานวิจัย จากการศึกษาพบว่าที่อุณหภูมิ 1100 องศาเซลเซียส และสัดส่วนของดินตะกอนต่อดินเหนียวเป็น 60:40 ให้ความต้านแรงอัดสูงสุด เท่ากับ 43.67 เมกกะปาสคาล ซึ่งสูงกว่าอิฐมอญและอิฐดินเผา คิดเป็น 49.95 และ33.6 เปอร์เซ็นต์ ตามลำดับ ในขณะที่ค่าอัตราการดูดซึมน้ำของอิฐดินตะกอนจากเหมืองที่สัดส่วนดังกล่าวมีค่าเท่ากับ 11.53 เปอร์เซ็นต์ ซึ่งสูงกว่าอิฐมอญและอิฐดินเผาถึง 53.87 และ 67.63 เปอร์เซ็นต์ ส่วนค่าความหนาแน่นและค่าสูญเสียน้ำหนักของอิฐดินตะกอนจากเหมืองมีค่าเท่ากับ 1.37 กรัมต่อลูกบาศก์เซนติเมตร และ 17.37 เปอร์เซ็นต์ ตามลำดับ นอกจากนี้ต้นทุนการผลิตของอิฐดินตะกอนจากเหมืองมีค่าต่ำกว่าอิฐดินเผา 24.76 เปอร์เซ็นต์
The Application Of Fmea To Study The Critical Barriers To Deploying Carbon Capture And Storage In A Thai Petroleum Refinery, Amornrat Sethi
The Application Of Fmea To Study The Critical Barriers To Deploying Carbon Capture And Storage In A Thai Petroleum Refinery, Amornrat Sethi
Chulalongkorn University Theses and Dissertations (Chula ETD)
The carbon capture and storage (CCS) technology is still in early phase development and not considered a competitive greenhouse gases (GHG) mitigation technology in Thailand to be included in the climate change mitigation plans, causing the lack of resources and market and other challenges to promote its development and deployment. CCS will play a crucial role as a GHG emission mitigation strategy in the coming years globally as the energy demand grows continuously. In order to successfully deploy the technology in different industries in Thailand, especially the energy sector, it is essential to identify all of the potential causes of …
การจัดทำแผนพัฒนาด้านเครื่องจักรและเทคโนโลยีเพื่อรองรับการเปลี่ยนแปลงสู่ระบบดิจิทัล, ชนิกานต์ มุสิกทอง
การจัดทำแผนพัฒนาด้านเครื่องจักรและเทคโนโลยีเพื่อรองรับการเปลี่ยนแปลงสู่ระบบดิจิทัล, ชนิกานต์ มุสิกทอง
Chulalongkorn University Theses and Dissertations (Chula ETD)
ปัจจุบันเทคโนโลยีดิจิทัลเข้ามามีบทบาทสำคัญในการพัฒนาองค์กร ดังนั้นเพื่อเป็นการตอบรับนโยบาย ประเทศไทย 4.0 ในการช่วยขับเคลื่อนประเทศ และเป็นแนวทางในการดำเนินงานให้กับภาครัฐ รัฐวิสาหกิจ และภาคเอกชน ให้สามารถดำเนินธุรกิจได้อย่างมีประสิทธิภาพ ให้เกิดมูลค่าทางธุรกิจนอกเหนือจากการค้า อีกทั้งยังเพิ่มศักยภาพและประสิทธิภาพในการทำธุรกิจ โรงงานกรณีศึกษา (ธุรกิจสิ่งพิมพ์ปลอดการปลอมแปลง) จึงมีความจำเป็นต้องทำการศึกษาและวิเคราะห์ และจัดทำแผนพัฒนาการดำเนินงานที่เกี่ยวข้องกับการเตรียมความพร้อมในการเปลี่ยนแปลงไปสู่การทำงานระบบดิจิทัล (Digital Transformation) ซึ่งส่วนประกอบที่สำคัญในฐานะองค์กรรัฐวิสาหกิจประเภทอุตสาหกรรมการผลิต คือการเตรียมความพร้อมด้านเครื่องจักรอัตโนมัติ เทคโนโลยีดิจิทัลและนวัตกรรมที่ทันสมัย ด้วยรากฐานของระบบการผลิตแบบยืดหยุ่น โดยมุ่งเน้นที่จะปรับเปลี่ยนกระบวนการทำงานให้สู่รูปแบบโรงงานอัจฉริยะ (Smart Factory) ซึ่งเป็นการผสานการทำงานโดยเครื่องจักรอัตโนมัติและพนักงานผู้ควบคุมเครื่องจักร โดยมีการเชื่อมต่ออุปกรณ์ต่างๆ เข้าด้วยกันผ่านทางเครือข่ายซึ่งครอบคลุมการเก็บรวบรวมข้อมูล การควบคุม การสื่อสาร และการบริหารจัดการระบบ ซึ่งจะช่วยขจัดปัญหาข้อมูลที่กระจัดกระจายในแผนกต่างๆ ของโรงงาน สามารถเฝ้าติดตามสถานะของอุปกรณ์ต่างๆ ได้แบบเรียลไทม์ งานวิจัยนี้จึงได้จัดทำแผนพัฒนาด้านเครื่องจักรและการนำเทคโนโลยีที่ทันสมัยเข้ามาใช้ในองค์กร ได้แก่ ระบบสารสนเทศการผลิต ระบบเชื่อมโยงข้อมูล ระบบการตรวจติดตามสถานะ ระบบ RFID เพื่อเตรียมความพร้อมสำหรับระบบการผลิตและระบบการบริหารสินค้าคงคลังของโรงงานให้สามารถรองรับระบบดิจิทัลได้อย่างมีประสิทธิภาพ และสามารถปรับตัวให้เข้ากับกระแสการเปลี่ยนแปลงในตลาดทั้งในด้านการให้บริการที่รวดเร็วและเทคโนโลยีที่ทันสมัย เพื่อสร้างความอยู่รอดในอนาคตให้กับองค์กรได้อย่างมั่นคง
การพัฒนากระบวนการตรวจสอบการไม่ยึดติดกันของแผ่นโพลีไวนิลคลอไรด์ ผ้าคาร์บอนและผ้าใยแก้วใน ผลิตภัณฑ์วินเซิร์ฟโดยการประยุกต์ใช้เซนเซอร์เสียงและเทคนิคการรู้จําแบบ, นภาพรรณ สุขประเสริฐ
การพัฒนากระบวนการตรวจสอบการไม่ยึดติดกันของแผ่นโพลีไวนิลคลอไรด์ ผ้าคาร์บอนและผ้าใยแก้วใน ผลิตภัณฑ์วินเซิร์ฟโดยการประยุกต์ใช้เซนเซอร์เสียงและเทคนิคการรู้จําแบบ, นภาพรรณ สุขประเสริฐ
Chulalongkorn University Theses and Dissertations (Chula ETD)
วัตถุประสงค์ของงานวิจัยนี้ เพื่อพัฒนาการตรวจสอบการยึดติดกันของแผ่นโพลีไวนิลคลอไรด์กับผ้าใยแก้วหรือผ้าคาร์บอนในผลิตภัณฑ์วินเซิร์ฟ ซึ่งกระบวนการตรวจสอบในปัจจุบันใช้คนในการเคาะและฟังเสียงเพื่อตัดสินชิ้นงานที่มีการยึดติดหรือไม่มีการยึดติด และเกิดความผิดพลาดจากการตัดสินโดยพนักงานที่ไม่มีทักษะ จึงมีการพัฒนาการตรวจสอบโดยการประยุกต์ใช้เซนเซอร์เสียงและการแปลงฟูเรียร์แบบเร็วเพื่อแปลงสัญญาณเสียงให้อยู่ในรูปของโดเมนความถี่ จากนั้นระบุความถี่การยึดติดและคำนวณพื้นที่ใต้กราฟ และใช้เทคนิคการรู้จำแบบและการแบ่งแบบอาบิทารีในการจำแนกชิ้นงานที่ไม่มีการยึดติดออกจากชิ้นงานที่มีการยึดติด โดยทำการทดลองกับวินเซิร์ฟทั้งหมด 4 ชนิด ได้แก่วินเซิร์ฟ 1,วินเซิร์ฟ 2,วินเซิร์ฟ 3 และ วินเซิร์ฟ 4 ที่ประกอบด้วยแผ่นโพลีไวนิลคลอไรด์ที่มีความหนาเท่ากันแต่มีความหนาแน่นแตกต่างกัน ผ้าใยแก้วและผ้าคาร์บอนที่มีความหนาแน่นแตกต่างกัน โดยผลการทดลองพบว่า ความหนาแน่นของแผ่นโพลีไวนิลคลอไรด์ ผ้าใยแก้วและผ้าคาร์บอนมีผลต่อความถี่การยึดติด โดยวินเซิร์ฟที่ประกอบด้วยแผ่นโพลีไวนิลคลอไรด์ ผ้าใยแก้วและผ้าคาร์บอนที่มีความหนาแน่นสูงจะมีความถี่การยึดติดสูงกว่าวินเซิร์ฟที่ประกอบด้วยแผ่นโพลีไวนิลคลอไรด์ ผ้าใยแก้วและผ้าคาร์บอนที่มีความหนาแน่นต่ำ และความเข้มพาวเวอร์สเปกตรัมที่ความถี่การยึดติดนี่เองที่บ่งบอกการยึดติดของแผ่นโพลีไวนิลคลอไรด์กับผ้าใยแก้วหรือผ้าคาร์บอน โดยความเข้มเพาเวอร์สเปกตรัมที่มากจะแปรผันตรงกับพื้นที่ใต้กราฟ ซึ่งพื้นที่ใต้กราฟที่มากหมายถึงการยึดติดที่ดีด้วย ผลการทดลองพบว่าจุดที่มีการยึดติดมีพื้นที่ใต้กราฟมากกว่าจุดที่มีการยึดติดบางส่วนและมากกว่าจุดที่ไม่มีการยึดติด โดยรูปแบบพื้นที่จำแนกการไม่ยึดติดของวินเซิร์ฟ 1 มีค่า ≤ 0.23 dB2 วินเซิร์ฟ 2 ≤ 0.25 dB2 วินเซิร์ฟ 3 ≤ 0.36 dB2 วินเซิร์ฟ 4 ≤ 0.26dB2 และผลการทดสอบความแม่นยำของรูปแบบพื้นที่จำแนกการยึดติดของวินเซิร์ฟ 1 วินเซิร์ฟ 2 และ วินเซิร์ฟ 4 มีค่าเท่ากับ 80% และ วินเซิร์ฟ 3 มีค่าเท่ากับ 90% จากผลการทดลองพบว่า การพัฒนาการตรวจสอบการยึดติดด้วยการใช้เซนเซอร์เสียงนี้ สามารถนำไปใช้ตรวจสอบการไม่ยึดติดได้ โดยไม่ต้องอาศัยทักษะการตรวจสอบของพนักงาน
การออกแบบกรอบการทำงานในการเก็บความต้องการผู้ใช้และทดสอบระบบของระบบสารสนเทศ กรณีศึกษาสถาบันการเงิน, พงษ์ลดา โอทาตะวงค์
การออกแบบกรอบการทำงานในการเก็บความต้องการผู้ใช้และทดสอบระบบของระบบสารสนเทศ กรณีศึกษาสถาบันการเงิน, พงษ์ลดา โอทาตะวงค์
Chulalongkorn University Theses and Dissertations (Chula ETD)
เนื่องจากสถาบันการเงินกรณีศึกษามีข้อจำกัดทางด้านความสามารถในการพัฒนาระบบสารสนเทศจึงมีการจ้างบริษัทภายนอกเพื่อสนับสนุนในการพัฒนาระบบสารสนเทศ เช่นเดียวกับกรณีศึกษาระบบการออกเอกสารในสถาบันการเงิน สถาบันการเงินได้รับข้อร้องเรียนจากลูกค้าเกี่ยวกับความผิดพลาดในการออกเอกสารที่เกิดจากการทำงานของระบบและความผิดพลาดของมนุษย์ในการดำเนินงาน ดังนั้นวัตถุประสงค์ของการศึกษานี้คือการออกแบบกรอบการทำงานในการเก็บความต้องการของผู้ใช้และการทดสอบการใช้งานในการพัฒนาระบบสารสนเทศเพื่อพัฒนาระบบสารสนเทศ ป้องกันข้อผิดพลาดในการทำงานของระบบและกำหนดนโยบายกระบวนการตรวจสอบคุณภาพเอกสารก่อนส่งมอบให้ลูกค้าเพื่อป้องกันข้อผิดพลาดจากความผิดพลาดของมนุษย์ในการปฏิบัติงาน การวัดความพึงพอใจโดยรวม (System Usability Scale) ในการใช้งานกรอบการทำงานแสดงให้เห็นว่าหลังจากเสนอกรอบการทำงานในการเก็บความต้องการของผู้ใช้และการทดสอบการใช้งานระบบให้กับพนักงานที่เกี่ยวข้องกับการพัฒนาระบบ ระดับความพึงพอใจที่มีต่อกรอบการทำงานใหม่และกรอบการทำงานเดิมในการเก็บความต้องการของผู้ใช้และการทดสอบการใช้งานเพิ่มขึ้นร้อยละ 30.93 และ 20.00 ตามลำดับ หลังจากหกเดือนที่มีการดำเนินการใช้กระบวนการตรวจสอบคุณภาพของเอกสารพบว่าไม่มีข้อร้องเรียนจากลูกค้าเกี่ยวกับความผิดพลาดในการออกเอกสาร
การศึกษาการเกิดเศษโลหะของเหล็กกล้าไร้สนิม ในกระบวนการผลิตวาล์วควบคุมแรงดัน สำหรับอุตสาหกรรมยานยนต์, พยุห์ เกิดจงรักษ์
การศึกษาการเกิดเศษโลหะของเหล็กกล้าไร้สนิม ในกระบวนการผลิตวาล์วควบคุมแรงดัน สำหรับอุตสาหกรรมยานยนต์, พยุห์ เกิดจงรักษ์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาการเกิดเศษโลหะของเหล็กกล้าไร้สนิม เนื่องจากพบปัญหาเศษโลหะติดอยู่ในรูของชิ้นงาน จากการเก็บข้อมูลของเสียระหว่างเดือนสิงหาคม-ตุลาคม พ.ศ.2562 ในไลน์การผลิตที่ 1 และไลน์การผลิตที่ 2 พบว่าทั้งสองไลน์การผลิตมีสัดส่วนของเสียเฉลี่ยอยู่ที่ร้อยละ 0.11 หรือคิดเป็น 1,130 PPM ต่อเดือน ในการดำเนินการวิจัยแบ่งออกเป็น 5 ระยะ โดยในระยะที่ 1 ทำการวิเคราะห์สาเหตุของปัญหา พบว่าปัญหาเศษโลหะติดอยู่ในรูชิ้นงานเกิดในกระบวนการกลึงปาดหน้าด้วยมีดตัดหยาบเนื่องจากลักษณะของเศษโลหะที่เกิดปัญหากับเศษโลหะในกระบวนการมีความใกล้เคียงกันทั้งขนาดและรูปร่าง ระยะที่ 2 ศึกษาทฤษฎีที่เกี่ยวข้องกับการเกิดเศษโลหะ โดยพบว่ามีปัจจัยที่เกี่ยวข้องกับการแตกหักและทิศทางของเศษโลหะคือเงื่อนไขการตัด ที่ประกอบด้วย ความลึกตัด อัตราป้อนตัดและความเร็วรอบสปินเดิล ระยะที่ 3 กำหนดขั้นตอนในวิธีดำเนินการวิจัย ระยะที่ 4 ผลการวิเคราะห์ข้อมูล ปัจจุบันเศษโลหะมีโอกาสตกลงไปในรูของชิ้นงานทุกระยะตัด จากผลการเปลี่ยนเงื่อนไขการตัด พบว่าเงื่อนไขที่เหมาะสมคือเงื่อนไขที่ 1 คือการเพิ่มความลึกตัดให้มากสุดที่ไม่ส่งผลต่อขนาดของชิ้นงาน เนื่องจากเศษโลหะจะมีความหนาเพิ่มขึ้นทำให้แตกหักง่าย มีความโค้งงอที่ลดลง จาก 2.04-3.12 มิลลิเมตร เป็น 0.56-1.48 มิลลิเมตร ทิศทางการแตกหักจะชนกับชิ้นงานทำให้กระเด็นไปทางอื่น ผลทดลองกับกลุ่มตัวอย่างจำนวน 20 ข้อมูล ไม่พบปัญหาเศษโลหะติดอยู่ในรูชิ้นงานเนื่องจากขนาดของเศษโลหะที่เล็กลง สรุปได้ว่าเงื่อนไขการตัดหลังปรับปรุงมีความเหมาะสมในการลดโอกาสที่ทำให้เศษโลหะติดค้างในรูชิ้นงานได้ และระยะที่ 5 สรุปผลการทดลอง ข้อเสนอแนะและอุปสรรคในการทดลอง
Quality Function Deployment (Qfd) For Designing Rock Sugar Chopping Machine, Janejira Pannavatkulthon
Quality Function Deployment (Qfd) For Designing Rock Sugar Chopping Machine, Janejira Pannavatkulthon
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objective of this research is to study and apply the principles of quality function deployment to design rock sugar chopping machine for selected sugar factory in order to increase productivity of current chopping process. The design of machine is analyzed using House of Quality which is a part of quality function deployment methodology. The data collection was conducted by on-site investigation and face-to-face interview with the owner of sugar factory. It is found that the main problem of this factory is inadequate of in-house production capacity and the bottleneck of manufacturing processes is chopping process. The result of this …
Product Development Of Rice Milk Soap, Jiradej Ekthumrong
Product Development Of Rice Milk Soap, Jiradej Ekthumrong
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objective of this research is to develop rice into rice milk soap using Quality Function Deployment (QFD) in order to add value to the product. The current rice production process can produce some broken rice, which is of low value. In order to increase value, the study is conducted to develop it into rice milk soap product. Quality Function Deployment is used to analyze and develop the product that best answer customer needs. There are data collection on customers through surveys to gain insights used for product development and rough product to market business plan. The result of this …
Assessing Feasibility Of Water Accounting Toolkit For In A Poultry Processing Plant, Kantinant Silabhusith
Assessing Feasibility Of Water Accounting Toolkit For In A Poultry Processing Plant, Kantinant Silabhusith
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this project, we will be looking into the use of a toolkit called water accounting as applied to a food processing plant and determine its effectiveness as a toolkit for monitoring water usage in a factory. The main objective of this thesis report is to 1. Recommend reducing water consumption by applying the water accounting toolkit. 2. Provide a standardized tool for the case study company to measure their sustainability progress and communicate that information clearly. This report will also discuss the extent in which the company can reduce their water consumption and their various methods in which to …
Decision Support System For Supplier Selection In Gas Pipeline Industry, Kawinkorn Ampornmaha
Decision Support System For Supplier Selection In Gas Pipeline Industry, Kawinkorn Ampornmaha
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objective of this research was to study and analyse both the quantitative and qualitative decision criteria for pipeline fabrication supplier selection in the gas pipeline industry in Rayong, Thailand. The decision-making process was analysed by the Analytic Hierarchy Process technique or AHP and computed using SpiceLogic software. The data collection was carried out by providing questionnaires to experts and specialists at the management level. It was found that the main factors were quality, technical capability, delivery, cost and financial stability. All the main factors were considered with the decision-making process for purchasing and selecting with the best supplier. The …
Tracking System Design For A Production Warehouse Of Automobile Condensers, Kittisak Lertkajornkitti
Tracking System Design For A Production Warehouse Of Automobile Condensers, Kittisak Lertkajornkitti
Chulalongkorn University Theses and Dissertations (Chula ETD)
In order to survive in a harshly competitive market, a company needs to enhance not only its core operational efficiency but also the performance of other business functions, including the supportive ones. As such, in this thesis, we will explore how we could improve the performance of one important supportive operation in a Thai automobile condenser manufacturer, namely the warehousing process, using RFID tracking technology. RFID tracking technology is brought into consideration by the company’s management team due to its current warehousing issues, including inventory mismatch, inventory misplacement, and faulty delivery. We found that the root cause of these problems …
Strategic Supplier Selection:The Case Of International Food Trading Company, Natchanok Paramaporn
Strategic Supplier Selection:The Case Of International Food Trading Company, Natchanok Paramaporn
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objective of the research project is to develop strategic supplier selection system for an international food trading company using the Analytic Hierarchy Process (AHP). The products involved are canned food for worldwide export. The decision makers consist of a president and two marketing managers. The chosen decision criteria listed by weight of important are ‘Export Capability’ (54%), ’Pricing Policy’ (28%), ‘Technological Catch-up’ (10%), ‘Ethical Practices’ (5%), and ‘Environmental Management’ (3%). The sub-criteria chosen are ‘Number of Food Safety Certificate’ (54%), ‘Net Selling Price’ (23%), ‘Automation in Production Process’ (8%), ‘Payment Terms’ (5%), ‘Worker’s Safety and Health’ (4%), ‘Adverse Weather …
Improvement Of Inventory Policy For Furniture Fittings Manufacturer, Natchaya Suntipiromkul
Improvement Of Inventory Policy For Furniture Fittings Manufacturer, Natchaya Suntipiromkul
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objective of this research is to improve the management of inventory in a furniture fittings manufacturer so that shortage and overstock could be reduced. Based on our initial investigations, such inventory problems were caused not only by inefficient production planning but also a lack of inventory control system that linked those plans with the stocks of raw material required. To better address the issues, two different models have been therefore proposed, namely more accurate demand forecasting models for products with different demand patterns and inventory control models for raw materials of those products. Regarding the development of more accurate …
Preventive Measures For Project Schedule Control Of Combined Cycle Gas Turbine Power Plant, Pakorn Prabhawong
Preventive Measures For Project Schedule Control Of Combined Cycle Gas Turbine Power Plant, Pakorn Prabhawong
Chulalongkorn University Theses and Dissertations (Chula ETD)
The objectives of this research are to analyse the construction critical paths of the combined cycle gas turbine power plant projects and to determine the delay preventive measures for project schedule control. First, the planned and actual construction schedules of the combined cycle gas turbine power plants have been studied and analysed to see their critical paths and also the near-critical path which could potentially become critical. Construction schedules of four power plants constructed in Thailand have been obtained and analysed. Their capacities and main equipment arrangement are summarized in Chapter 5.1. The common work breakdown structures have been set …
An Implementation Of Stock Allocation Plan Of Retail Store Based On Cluster Analysis, Punnakrit Natekijcharoen
An Implementation Of Stock Allocation Plan Of Retail Store Based On Cluster Analysis, Punnakrit Natekijcharoen
Chulalongkorn University Theses and Dissertations (Chula ETD)
This thesis presents an implementation of cluster analysis on retail store clustering so that better cluster-based stock allocation plans could be effectively devised and efficiently executed. For the case study company, stock allocation is one of its key strategic decisions as improper stock allocation, especially during special occurrences with high sale volumes, may lead to loss of sales – and so overstocking at some stores/clusters. Based on our initial investigations, we find that the current clustering technique is somewhat inefficient as it simply divides the stores into four groups with equal members based on store’s sales performance. Besides, the coefficient …
Big Data Analytics For Improving Customer Win-Back Rate In Townhome Segment, Warot Lilahajiva
Big Data Analytics For Improving Customer Win-Back Rate In Townhome Segment, Warot Lilahajiva
Chulalongkorn University Theses and Dissertations (Chula ETD)
Thailand’s real-estate market is now facing with negative growth, where most developers are encountered with challenges in generating satisfactory revenue, particularly from new customers. In order to improve the revenue stream, customer win-back approach that focuses on current customers in the sales funnel and re-engages them by offering more attractive residential projects is therefore initiated. In particular, we focus on the development of predictive analytics model that potentially increases customer win-back rate by exploring the current databases, identifying significance for win-back (based on past performance), and testing the resulting predictions via several machine learning algorithms. The proposed method returns a …
Reducing The Defects Of A-Pillar Stamping Partin Automotive Assembly Process, Hassakorn Rojpitinithikorn
Reducing The Defects Of A-Pillar Stamping Partin Automotive Assembly Process, Hassakorn Rojpitinithikorn
Chulalongkorn University Theses and Dissertations (Chula ETD)
The goal of this research is to minimize defects in the process of automotive assembly. Regarding the one-year defect and value; the biggest defect cost come from portion of the A-Pillar stamping parts. Therefore, by using Failure Mode and Effect Analysis (FMEA) to examine it and perform experiments using the Design of Experiment (DOE), we investigated the production process as well as figuring out the cause of the problems that happen in the stamping process. The results found that the issue arose from the design of stamping die, which is the risk of springback problems of parts, is not good …
A Development Of Family Continuity Management For Medical Staffs Based On Business Continuity Management, Kananut Charoenthammachoke
A Development Of Family Continuity Management For Medical Staffs Based On Business Continuity Management, Kananut Charoenthammachoke
Chulalongkorn University Theses and Dissertations (Chula ETD)
Nowadays, the Business Continuity Management (BCM) is one of the most effective programs to reduce impact from crisis, incident, or any disaster for organizations focusing on their continuity operations. In addition to handling the incident which disrupts or interferes the business processes, the BCM has been developed into a new term of strategy like “resilience.” The purpose of this research is to develop and implement the BCM framework program for family. In this study, the proposed “Family Continuity Management” (FCM) program training was conducted for 51 medical staffs. There are 10 phases in the FCM training program experiment. The samples …
Utilizing User-Generated Content To Analyze Tours And Activities In Bangkok: A Tripadvisor Case Study, Naina Chugh
Utilizing User-Generated Content To Analyze Tours And Activities In Bangkok: A Tripadvisor Case Study, Naina Chugh
Chulalongkorn University Theses and Dissertations (Chula ETD)
The overarching goal of this paper is to gain visibility on tourist preferences and whether or not the needs of tourists are being met. With the Travel and Tourism (T&T) sector being the backbone to the global economy and the sector becoming more saturated and competitive, insights on T&T are vital now, more than ever. The rise of social media and user-generated content has effectuated the opportunity for a systematic analysis of tourist preferences via user-generated content. This paper is focused on gaining insights into tourism in Bangkok, Thailand through user-generated content scraped from TripAdvisor’s online reviews of tours and …
Customer Churn Prediction For A Software-As-A-Service Inventory Management Company, Phongsatorn Amornvetchayakul
Customer Churn Prediction For A Software-As-A-Service Inventory Management Company, Phongsatorn Amornvetchayakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
This thesis proposes customer churn prediction model for a Software-as-a-Service inventory management company in Thailand. Software-as-a-Service is the fast growing and high market values industry as a new emerging online business. Customer churn is a critical measure for this business. Thus, this thesis focuses on seeking a customer churn prediction model specified for a Software-as-a-Service inventory management company in Thailand which is facing a high churn rate issue. This thesis executes the prediction models with four machine learning algorithms: logistic regression, support vector machine, decision tree and random forest. The results show that the optimized decision tree model is capable …
Smes' Obstacles In Thailand: The Analysis Of The Association Between The Difference In Size, Sector, Region And The Problems That Occur In Business Operations, Phoom Traithaiteera
Smes' Obstacles In Thailand: The Analysis Of The Association Between The Difference In Size, Sector, Region And The Problems That Occur In Business Operations, Phoom Traithaiteera
Chulalongkorn University Theses and Dissertations (Chula ETD)
The number of small and medium enterprises (SMEs) in Thailand has increased these years. The objectives of this research were to identify obstacles in business operations and develop a guideline to promote and support SMEs in Thailand. The data was collected in the questionnaire; the respondents of this research are entrepreneurs entering the government services by the Department of Industrial Promotion between the years 2016 - 2018 with a total of 1,297 enterprises. This research used a chi-square test for independence to determine whether there is a significant association between the two variables. The results showed that the small sized …
Forecasting Daily Foreign Tourists For A Tour Operator In Thailand, Pornpawit Niamjoy
Forecasting Daily Foreign Tourists For A Tour Operator In Thailand, Pornpawit Niamjoy
Chulalongkorn University Theses and Dissertations (Chula ETD)
Tour operators are playing an important role in the tourism industry which is an essential part of industries for Thailand's economy. Accurate tourist forecasting of daily tourist demands for tour operators is very important in revenue management and planning of tour operators, such as providing a guide or vehicle for each day. This research has presented and compared the forecasting models that will be selected to be suitable for the tour operator for a case-study company. The forecasting models used in this research consist of Seasonal Autoregressive Integrated Moving Average model (SARIMA), Seasonal Autoregressive Integrated Moving Average model with exogenous …
A Study Of Factors Affecting To Long-Term Relationship Of Outsourcing, Thitiporn Katato
A Study Of Factors Affecting To Long-Term Relationship Of Outsourcing, Thitiporn Katato
Chulalongkorn University Theses and Dissertations (Chula ETD)
"Outsourcing" is very important for the organization's strategy to seek to reduce costs and specialize in a limited number of core areas. Thailand is known worldwide as a key outsourcing service provider. To know the factors affecting long-term relationship outsourcing are essential for the business continuities of Business Process Outsourcing (BPO) providers in Thailand. Based on the literature review, this research proposes a model that cooperation, control, and improvement will affect performance and then further affects outsourcing long-term relationship. Using a data set collected from 322 questionnaire surveys through e-mails, and 200 sent to personal to test proposed hypotheses from …