Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Taxonomy Of Scheduling Problems In Semiconductor Device Test Operations, Tali Freed, Robert C. Leachman, Kenneth H. Doerr

Industrial and Manufacturing Engineering

Semiconductor device test facilities differ not only by production volume and tester brands. The complexity of the devices and the characteristics of the testers affect the scheduling methodologies as well. Goals and strategies vary from one firm to another, leading to a variety of objectives and performance measures. Due to random yield lot size is variable and lot priorities are common. Changeover times are oftentimes sequence-dependent. Since semiconductor device testing systems are very costly, scheduling methods that increase the throughput of the facility are financially significant. In this paper we describe a variety of semiconductor device testing environments, develop mathematical …

A Comparative Study On Projected And Actual Manufacturing Times To Identify The Source Of Customer Delinquency, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

This study was an investigation of the projected lead time and the actual lead time for a part manufactured at Tri-Industries Inc., Terre Haute, Indiana. The research was focused on a single part produced in Tri-Industries. The problem was that there is a difference in the projected lead time and the actual lead time of the part under investigation. The actual lead time was longer than projected lead time, which resulted in the company being delinquent in customer delivery. This investigation was conducted to find out the source for customer delinquency for a single part in Tri-Industries. The conclusion was …

Computer-Aided Engineering For Tool Design In Manufacturing Engineering Curriculum, Daniel J. Waldorf

Industrial and Manufacturing Engineering

At Cal Poly – San Luis Obispo, a variety of tool design issues are covered in a junior-level manufacturing engineering course called Tool Engineering. In the course, designing fixtures – for any process – is a major component of the content. The process of designing a fixture is similar to the method a mechanical engineer would use to design a new product. The course is therefore an excellent opportunity to teach design principles to manufacturing engineers. This project involves an attempt to introduce computer-aided methods, including the finite element method (FEM), for analysis of tool design into the Tool Engineering …

Teaching Factory, Sema E. Alptekin, Reza Pouraghabagher, Patricia Mcquaid, Daniel Waldorf

Industrial and Manufacturing Engineering

Academia must develop a new approach to teaching in order to better prepare engineering students to function efficiently and adjust readily within the framework of the factories in the real world. Some engineering programs emphasize theory, while others emphasize application as isolated blocks. The "Teaching Factory" being developed at Cal Poly combines both theory and applications. It makes use of state-of-the-art industrial grade production equipment, computer hardware and software in the form of the following two systems: 1) a functioning "real" factory hardware environment, and 2) a Production Planning and Control Center.

The Need For Emphasis On Teaching The Content Of Certain Subject Areas And Teaching Concepts Related To Certain Packaging Industry Job Titles As Perceived By Packaging Professionals In Indiana And The Surrounding States, Marion D. Schafer

All-Inclusive List of Electronic Theses and Dissertations

The study investigates the opinions or packaging professionals about an appropriate curriculum for a Bachelor of Science degree program in packaging. The study was conducted by surveying packaging profossionals randomly seleclcd from the Central Indiana Institute of Packaging Professionals mailing list. This list was made up mostly of Indiana residents but included a few residents from the fhur surrounding slates. The study was initiated as a first step in the process of developing appropri.ite improvements to the curriculum for the Bachelor of Science degree in packaging al Indiana State University. Six packaging job titles and twenty-three su~jcct areas were chosen …

Plastic Solder Paste Stencil For Surface Mount Technology, Christopher K. Wong, Daniel Waldorf

Industrial and Manufacturing Engineering

Solder paste masks or stencils are an integral part of the manufacturing process for surface mount PCBs. This study examines the feasibility of a process for rapid creation of a solder paste stencil using thermoplastic material. CNC laser cutting of the stencil geometry is replacing traditional use of chemical etching on metal sheets to produce stencils. Laser cutting has been used to improve process speed, accuracy, and cost. This research attempts to continue to simplify and reduce costs in the stencil making process by proposing as the stencil material a common thermoplastic that can be cut easily and quickly using …

Product Flexibility In Selecting Manufacturing Planning And Control Strategy, Emine Persentili, Sema E. Alptekin

Industrial and Manufacturing Engineering

The manufacturing systems capable of producing several products simultaneously are frequently subject to changes in product types due to demand fluctuations. In such systems a product flexible manufacturing planning and control (MPC) strategy is needed to change from one product type to another with minimum deterioration to system performance levels. The objective of this research is to develop a systematic analysis and evaluation approach in order to compare the MRP-push and JIT-pull strategies quantitatively based on a product flexibility measure. A new product flexibility measure is developed based on the sensitivity to change concept and presented together with the implementation …

Process Flow Optimization Studies Through Discrete Event Simulation, Milind Chokshi

Electrical & Computer Engineering Theses & Dissertations

Computer-aided simulation has begun to emerge as a powerful tool for numerical analysis of the behavior and anticipated performance of industrial systems and their optimization. Applications include materials handling, storage and controls systems, prediction of manufacturing efficiencies, and production optimization. Simulations are used to test baseline models and subsequently analyze new production concepts, operating strategies, and planned procedures prior to costly implementation.

The study of process flows in a manufacturing environment is difficult due to its inherent stochastic nature. Breakdown of the sub-systems and failures of machines is a random process and needs to be solved based on concepts of …

Simtrainer: A Management Training Tool, Wade Stark, Sema E. Alptekin

Industrial and Manufacturing Engineering

Abstract published of poster paper presented at conference.

Scheduling Semiconductor Device Test Operations On Multihead Testers, Tali Freed, Robert C. Leachman

Industrial and Manufacturing Engineering

Past attempts to devise scheduling methods for the device test operations of semiconductor manufacturing firms fail to address a significant characteristic of multiple-head test systems—the dependency of processing rates on the lots processed simultaneously on the testers. Since the problem has never been modeled accurately in the scheduling literature, feasibility and performance of previously proposed scheduling methodologies for multihead testers may not be accurately assessed. In this paper, we describe the multihead tester scheduling problem, present an enumeration solution procedure, and illustrate the problems of previously suggested tester scheduling algorithms.

An Evaluation Of Ploughing Models For Orthogonal Machining, Daniel J. Waldorf, Richard E. Devor, Shiv G. Kapoor

Industrial and Manufacturing Engineering

An analytical comparison is made between two basic models of the flow of workpiece material around the edge of an orthogonal cutting tool during steady-state metal removal. Each has been the basis for assumptions in previous studies which attempt to model the machining process, but no direct comparison had been made to determine which, if either, is an appropriate model. One model assumes that a separation point exists on the rounded cutting edge while the other includes a stable build-up adhered to the edge and assumes a separation point at the outer extreme of the build-up. Theories of elastic-plastic deformation …

Gauge Repeatability & Reproducibility Study For A 3-D Solder Paste Inspection System, Jianbiao Pan, Gregory L. Tonkay, Robert H. Storer, Ronald M. Sallade, David J. Leandri

Industrial and Manufacturing Engineering

Due to the increased use of Ball Grid Arrays (BGAs) and fine pitch and ultra fine pitch Quad Flat Packages (QFPs), there is a dramatic increase in demand for solder paste inspection after the stencil printing process. The important response variables of the printing process are deposited solder paste volume, area, height and position. To identify and remove defects at the earliest possible process step, a 3-D solder paste inspection system should be used to monitor solder paste deposited on all pads on every board before component placement. An example is a fully automatic laser-based 3-D triangulation solder paste inspection …

Critical Variables Of Solder Paste Stencil Printing For Micro-Bga And Fine Pitch Qfp, Jianbiao Pan, Gregory L. Tonkay, Robert H. Storer, Ronald M. Sallade, David J. Leandri

Industrial and Manufacturing Engineering

Stencil printing continues to be the dominant method of solder deposition in high volume surface mount assembly. Control of the amount of solder paste deposited is critical for fine pitch and ultra-fine pitch SMT assembly. The process is still not well understood as indicated by the fact that industry reports 52-71% of SMT defects are related to the solder paste stencil printing process. The purpose of this paper is to identify the critical variables that influence the deposited solder paste volume, area, and height. An experiment was conducted to investigate the effects of relevant process parameters on the amount of …

Screen Printing Process Design Of Experiments For Fine Line Printing Of Thick Film Ceramic Substrates, Jianbiao Pan, Gregory L. Tonkay, Alejandro Quintero

Industrial and Manufacturing Engineering

Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960's. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still considered by industry to be difficult. In order to yield high resolution prints with high first pass yields and manufacturing throughput, the printing process must be controlled stringently.

This paper focuses on investigating the …

Industrial Engineering Made Simple, Deena Daggett, Sema E. Alptekin

Industrial and Manufacturing Engineering

Many high school students these days do not quickly recognize or identify Industrial Engineering (IE) procedures, practices, and products. Recruitment of qualified students into IE programs requires continuous planning, publicizing, and networking. Traditional recruitment efforts have included high school visits, brochures & flyers, and university-sponsored workshops. However, these techniques have only achieved mediocre success. Currently, a need exists for new promotional materials that utilize visual tools and provide a “hands-on” approach. We have developed several exercises that successfully introduce IE. Two such exercises are explained in this paper. The first exercise demonstrates the differences between Assembly line and Cellular Manufacturing …

Worn Tool Forces Based On Ploughing Stresses, Daniel Waldorf, Shiv G. Kapoor, Richard E. Devor

Industrial and Manufacturing Engineering

Recent work in modeling of the ploughing mechanism in basic metal machining may provide a means of estimating the additional forces to be expected when cutting with a worn tool. The results predict the rubbing stresses due to the finite radius of an unworn tool edge. Since an unworn tool can be thought of as a worn tool with a wear land width VB = 0, these stresses can make up part of a strategy for predicting the additional forces incurred by a worn tool. This paper develops a wear model by proposing a technique for utilizing the stresses predicted …

Screen Printing Process Design Of Experiments For Fine Line Printing Of Thick Film Ceramic Substrates, Jianbiao Pan, Gregory L. Tonkay, Alejandro Quintero

Industrial and Manufacturing Engineering

Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still considered by industry to be difficult. In order to yield high resolution prints with high first pass yields and manufacturing throughput, the printing process must be controlled stringently.

This paper focuses on investigating the …

A Slip-Line Field For Ploughing During Orthogonal Cutting, Daniel J. Waldorf, Richard E. Devor, Shiv. G. Kapoor

Industrial and Manufacturing Engineering

Under normal machining conditions, the cutting forces are primarily due to the bulk shearing of the workpiece material in a narrow zone called the shear zone. However, under finishing conditions, when the uncut chip thickness is of the order of the cutting edge radius, a ploughing component of the forces becomes significant as compared to the shear forces. Predicting forces under these conditions requires an estimate of ploughing. A slip-line field is developed to model the ploughing components of the cutting force. The field is based on other slip-line fields developed for a rigid wedge sliding on a half-space and …

Fuzzy Logic Control Of A Model Airplane, Jon C. Ervin, Sema E. Alptekin

Industrial and Manufacturing Engineering

Common uses of fuzzy logic control today are found in relatively simple applications in products. These applications only scratch the surface of the potential of fuzzy logic control in complex mechatronic systems. In order to demonstrate the utility of fuzzy logic in complex device control, a fuzzy logic fly-by-wire system has been developed for a model airplane. The model airplane is a complex system of several critical inputs that require rapid processing and action in order to maintain flight stability. In addition, payload and power constraints severely limit the size, weight and processing power of the hardware to be carried …

Development Of A Mechatronics Design Studio, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is a combination of mechanics, electronics and information technology intended to raise the intelligence level and flexibility of products and devices. There is a need to develop programs and laboratories in Mechatronics to create an understanding of how new technologies influence the traditional methods of designing products and manufacturing systems. A model "Mechatronics Design Studio" has recently been developed to support the Mechatronics and Manufacturing Automation courses offered at Cal Poly's Industrial and Manufacturing Engineering Department. Laboratory experiments have been developed and several student projects have been completed. In this paper, an overview of the design studio and select …

An Integrated Approach To Simulation And Activity-Based Costing For Evaluating Alternative Manufacturing Cell Designs, Robert Williams, Paul Savory, Rodney Rasmussen

Department of Industrial and Management Systems Engineering: Faculty Publications

One effective technique for improving manufacturing efficiency involves the application of group technology part families and manufacturing cells. Selection of the best or optimum configuration of the manufacturing cell relies on the experience and judgment of the cell designer. This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model and be used to evaluate manufacturing cell configurations. The output of the combined ABC simulation model provides a detailed “Bill of Activity” which allows the cell designer to consider costs as a critical factor in the cell design problem. Alternative cell configurations studied in this …

Preparing The Leaders For Mechatronics Education, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is the synergetic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and processes. There is a need to develop interdisciplinary programs in Mechatronics that better prepare our graduates to design, build, and operate the products and systems of today and tomorrow. To address this need, National Science Foundation funded a project entitled "Preparing the Leaders for Mechatronics Education" undertaken by Cal Poly in 1995 - 1996. In this paper, the activities that took place during this two-year program is outlined. Several courses and course modules have already been developed and implemented by …

A Psychological Perspective On Service Segmentation Models: The Significance Of Accounting For Consumers' Perceptions Of Waiting And Service, Ziv Carmon, J. George Shanthikumar, Tali F. Carmon

Industrial and Manufacturing Engineering

We examine how service should be divided and scheduled when it can be provided in multiple separate segments. We analyze variants of this problem using a model with a conventional function describing the waiting cost, that is modified to account for some aspects of the psychological cost of waiting in line. We show that consideration of the psychological cost can result in prescriptions that are inconsistent with the common wisdom of queuing theorists derived according to the conventional approach (e.g., equal load assignments). More generally, our intention in this paper is to illustrate that aspects of the psychological cost of …

First Line Supervisor Perceptions: The Effectiveness Of Specific Safety Training Materials, Cynthia Houlson

Graduate Research Papers

The problem of this study was to determine whether first line supervisors, who have been exposed specifically to Safety Focus Topics, perceived them as an effective tool in filling their role as a safety trainer.

Development Of A Knowledge-Based System For Generating Process Plans Using Group Technology: A Study For Norfolk Naval Shipyard, William P. Keene Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study and analyze the Norfolk Naval Shipyard's manufacturing methods of determining part families and generating part process plans for parts in the machine shop. A knowledge-based decision support system was designed based on knowledge acquired from machinist experts and documented sources of the Norfolk Naval Shipyard. The system interprets specific part information provided by the user, categorizes parts into part families and generates process plans to manufacture the parts. The system was evaluated and tested for parts provided by Norfolk Naval Shipyard.

A Preliminary Model For Lot Sizing In Semiconductor Manufacturing, Tali F. Carmon, Steven Nahmias

Industrial and Manufacturing Engineering

No abstract provided.

Error Recovery In Intelligent Robotic Workcells, R. D. Borchelt, Sema E. Alptekin

Industrial and Manufacturing Engineering

This paper focuses on the requirements for achieving automated diagnosis and error recovery in a robotic assembly cell. Untended robust operation is the goal which is discussed, and the use of a knowledge-base oriented diagnostic/control system to support on-line error recovery is advocated. It is proposed that error recovery attempts should be made, not only based on information gathered by system sensors, but also by using additional cell-specific knowledge pertaining to recovery strategies. Recovery attempts are to be made even in the absence of complete diagnosis, in order to gather additional information. A control structure developed to implement this approach …

The Importance Of Considering Size Effect Along The Cutting Edge In Predicting The Effective Lead Angle For Turning, William J. Endres, Daniel Waldorf

Industrial and Manufacturing Engineering

The concept of an effective orthogonal cutting edge in turning is considered. The orientation of this edge in the radial-longitudinal plane, as commonly modeled through an effective lead angle, is studied. The methods of effective lead angle prediction used in numerous previously developed force models are plagued with large errors over ranges of process inputs, in particular feed rate and depth of cut. Four previously developed methods of effective lead angle prediction are reviewed and compared to a new method presented here. This new method accounts for the size effect as introduced through the variation in chip thickness along the …

Set-Up Saving Schemes For Printed Circuit Boards Assembly, Oded Z. Maimon, Ezey M. Dar-El, Tali F. Carmon

Industrial and Manufacturing Engineering

Focusing on a basic printed circuit board (PCB) assembly line configuration characterized by very long set-up times, we examine two scheduling methods that can significantly reduce the set-up. Both methods -the Grouped Set-Up (GSU) method that has been recently introduced in the literature and the Sequence Dependent Scheduling (SDS) method, which has not been studied in this context -are based on component commonality among PCB types. Using the typical traditional scheduling method as a benchmark, the GSU and the SDS methods are compared in terms of three performance measures: line throughput, average work-in-process (WIP) inventory level, and implementation complexity. Guidelines …

Integration Of Simulation Modeling And Computer Aided Production Management In Computer Integrated Enterprise, Emine Persentili, Sema E. Alptekin

Industrial and Manufacturing Engineering

Designing efficient and integrated manufacturing systems is the first step in attaining computer integrated enterprises (CIE). Integration of planning and implementation phases of manufacturing is essential for taking full advantage of the CIE. In order to design reliable and efficient manufacturing systems, the designers must consider the impacts of planning decisions made by computer aided production management (CAPM) modules on implementations held in manufacturing cells. This paper focuses on two issues. The first issue is importance and necessity of integrating CAPM modules with manufacturing cells. The second issue includes major features of the object-oriented approach and their relevance to our …