Operations Research, Systems Engineering and Industrial Engineering Commons^™

Study Of Temperature Profile In Drying Process, Shaxnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, Tojiniso Tursunboyevna Raxmanova

Chemical Technology, Control and Management

The article describes the simulation of the temperature field in a wide range of structural and operational parameters of the drying process. A qualitatively new representation of the temperature field profile in the chamber is revealed. As a result of the experiments, criteria were found for the unevenness of the temperature profiles on the pallets of the dispersion of the temperature of the material and the slope of the approximating line at fixed values of the average temperature of the substance. In the course of the work, an interrelation between the criteria of unevenness was revealed, which is clearly manifested …

Modeling Of Monitoring Systems Of Solar Power Stations For Telecommunication Facilities Based On Wireless Nets, Ilkhomjon Xakimovich Siddikov, Khalimjon Ergashevich Khujamatov, Doston Turayevich Khasanov, Ernazar Nurjamiyevich Reypnazarov

Chemical Technology, Control and Management

In this paper described of modelling processes of the real-time remote monitoring system of solar power sources, modelled and investigated by wireless sensor nets of telecommunications devices. As a modelling environment was obtained Proteus software. In processes of modelling of the system, structure and a block diagram of the system were developed, each of elements is deleted to parts of the system and separately described. Specially created software for the research system. The structure of the system developed and software tested by modelling processes. The results of modelling of monitoring system presented in a virtual terminal, an oscillography, and a …

Methods For Ensuring The Stability Of Design Reliability In Rural Telecommunications Network During Its Operation, Akbar Daniyarovich Normurodov Mr.

Chemical Technology, Control and Management

The article discusses methods to ensure the stability of the design reliability of a rural telecommunications network during its operation. In rural areas, for a number of reasons, the power supply from the power supply network is interrupted at random times. In this regard, backup power sources are provided for the power supply of OLT equipment. To provide a telecommunication network with stable power supply, it is proposed to use solar sources of electricity.

Viability Of Augmented Reality For Machine Maintenance, Wesley Robert Ferguson

Theses and Dissertations

Augmented reality has come a long way in the past decades in the manner of reduced costs and increased reliability. Despite these developments, there is still a difficulty bridging the gap between practical use and pure theory. This work explores if the current state of augmented reality is at a stage that can be utilized to implement solutions for heavy machinery maintenance routines by exploring the quality of education from augmented reality applications, capturing said maintenance routines for our own system, then replicating them in an augmented reality application with consumer grade equipment.

Towards A Cyber-Physical Manufacturing Cloud Through Operable Digital Twins And Virtual Production Lines, Md Rakib Shahriar

Graduate Theses and Dissertations

In last decade, the paradigm of Cyber-Physical Systems (CPS) has integrated industrial manufacturing systems with Cloud Computing technologies for Cloud Manufacturing. Up to 2015, there were many CPS-based manufacturing systems that collected real-time machining data to perform remote monitoring, prognostics and health management, and predictive maintenance. However, these CPS-integrated and network ready machines were not directly connected to the elements of Cloud Manufacturing and required human-in-the-loop. Addressing this gap, we introduced a new paradigm of Cyber-Physical Manufacturing Cloud (CPMC) that bridges a gap between physical machines and virtual space in 2017. CPMC virtualizes machine tools in cloud through web services …

Models For Data Analysis In Accelerated Reliability Growth, Cesar Alexander Ruiz Torres

Graduate Theses and Dissertations

This work develops new methodologies for analyzing accelerated testing data in the context of a reliability growth program for a complex multi-component system. Each component has multiple failure modes and the growth program consists of multiple test-fix stages with corrective actions applied at the end of each stage. The first group of methods considers time-to-failure data and test covariates for predicting the final reliability of the system. The time-to-failure of each failure mode is assumed to follow a Weibull distribution with rate parameter proportional to an acceleration factor. Acceleration factors are specific to each failure mode and test covariates. We …

Investigation Of The Process Of Self-Discharge Acid Batteries, Asilbek Kiryigitovich Mamatkulov, Eldor Ikromovich Ruzmatov, Gulniso Yulchievna Zhumaeva, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

In this study, investigations were conducted on the process of self-discharge of acidic car batteries. The dependence of battery discharge on environmental temperature has been studied. It was found that the self-discharge of batteries increases by up to 60% over 12 months when the temperature rises from +10⁰C to +40⁰С. Replacing the tin in the electrode alloy with a more electronegative metal has been shown to reduce the self-discharge process by up to 2% per month. Because, the self-discharge of electrode batteries made of lead-calcium alloy is relatively low, the consumption of working fluid is relatively …

Using Of Parametric Nonlinear Lc-Circuits In Stabilized Transducers Of The Number Of Phases, Ivan Mikhaylovich Bedritsky, Kamila Komilovna Jurayeva, Laziz Kholboboyevich Bozorov

Chemical Technology, Control and Management

The use of nonlinear circuits of an autoparametric nature with inductive and capacitive elements for obtaining the necessary phase shifts in single-phase-three-phase converters is considered. The amplitude-phase relations between the stresses of windings located on different rods of a three-core core are obtained. The conditions under which it is possible to stabilize the stresses of the artificial phases of the Converter, as well as the phase shifts between them, are shown.

Application Of A Convolutional Neural Networks For Images Recognition, Avazjon Rakhimovich Marakhimov, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

In the problems of image recognition, various approaches used when the image is noisy and there is a small sample of observations. The paper discusses nonparametric recognition methods and methods based on deep neural networks. This neural network allows you to collapse images, to perform downsampling as many times as necessary. Moreover, the image recognition speed is quite high, and the data dimension is reduced by using convolutional layers. One of the most important elements of the application of convolutional neural networks is training. The article gives the results of work on the application of convolutional neural networks. The work …

Remote Measurement Of Plant Biomass By Picosecond Laser Radiation, Abdushukur Abdugafurovich Mukhamedov, Abdirashid Saribaevich Rysbaev, Shamsiddin Norchaevich Ernazarov

Chemical Technology, Control and Management

A description is given of a high-speed optical recording system that uses a solid-state yttrium-aluminum garnet Nd3+ laser that generates a train of picosecond laser pulses. It is shown that by registering and temporarily scanning the secondary fluorescence radiation excited by a sequence of picosecond pulses, it is possible to remotely determine the biomass of plants based on a prematurely created bank of laboratory data.

International Higher Education Cooperation Under Conditions Of Fuzzy Terminology: Intellectual Mobility Vector, Ulugbek Vasikovich Mannanov, Igor Ivanovich Gancherenok

Chemical Technology, Control and Management

Terminology analysis of higher education internationalization process concerning joint educational programs is fulfilled. Fuzziness of used terminology is demonstrated. Joint higher education establishments development in the framework of fractal model is suggested as a strategic direction of higher education internationalization, enhancement of its quality and a concept of effective intellectual mobility.

Synergetic Control Of Nonlinear Dynamic Objects, Isomiddin Siddikov, Komil Usmanov, Noilakhon Yakubova

Chemical Technology, Control and Management

Considers the synthesis of effective control algorithms for a chemical reactor, which is the main one in the production of butyl alcohol. The method based on synergetic approach for transferring the apparatus from one capacity to another (specified) maintaining the required quality of the target component is proposed in order to ensure the stabilization of the concentration of target component at the outlet of the reactor under the conditions of uncertain disturbances affecting to an object. A mathematical model of the process based on a stoichiometric matrix taking into account the physicochemical properties of the process is developed. The control …

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Feasibility Of Electric Field Assisted Clogging Reduction In Cold Gas Spraying Nozzle, Hendric Tronsson

ENGS 88 Honors Thesis (AB Students)

The relatively novel cold spraying process expands its range of applications constantly. In order to continue this trend, this process still has various hurdles that need to be overcome such as clogging. Clogging within the cold gas spraying process causes porous coatings with less material properties and lower durability; a solution is needed in order to reduce the clogging and so expand the cold gas spraying applications. This study aimed to explore the feasibility of using an electric field to reduce clogging. To do so a simplified channel was used to simulate charged particle trajectory shifts under the influence of …

Application Of Mounting Personal Pid Voc Sensors To Small Unmanned Aircraft Systems To Aid First Responders, Cheri Marcham

Publications

Small Unmanned Aerial Systems in Emergency Response

• Current sUAS Uses
• Search and rescue
• Thermal imaging
• Evaluating structural stability
• Spread of wildfires
• Storm damage

Maintenance Isn’T Just About Grease, Jim Burgin

Operations Management Presentations

Document maintenance is becoming a bit of a challenge. Slowly, but surely, business leaders are realizing that maintenance isn’t just a “necessary evil” but a competitive advantage that can help differentiate their company from others in the same industry. Maintenance is a broad concept, and this webinar is just to get you thinking about maintenance in a different way. Because of the “necessary evil” concept, professional maintenance resources are rare.

Maintenance costs real money. Depending on the size of the operation, labor, contractors, and material costs can be significant. While that seems like a lot of money, consider the costs …

Simulation Modeling Of Cross-Dock And Distribution Center Based Supply Chains, Ghewa Al Chall

Graduate Theses and Dissertations

Companies are implementing new strategies to meet the customer requirements in terms of quality, timing, and cost. One of these strategies is cross-docking, which can be defined as the process of consolidating the products coming from different suppliers, but having the same destination, with minimal handling and almost no storage between loading and unloading of the goods. The purpose of this research is to investigate the benefits of having a cross-docking facility in a supply chain. In this research, we focus on developing discrete event simulation models using the opensource Java Simulation Library (JSL). Also, we work on augmenting an …

Improvement Of Geometric Quality Inspection And Process Efficiency In Additive Manufacturing, Yu Jin

Graduate Theses and Dissertations

Additive manufacturing (AM) has been known for its ability of producing complex geometries in flexible production environments. In recent decades, it has attracted increasing attention and interest of different industrial sectors. However, there are still some technical challenges hindering the wide application of AM. One major barrier is the limited dimensional accuracy of AM produced parts, especially for industrial sectors such as aerospace and biomedical engineering, where high geometric accuracy is required. Nevertheless, traditional quality inspection techniques might not perform well due to the complexity and flexibility of AM fabricated parts. Another issue, which is brought up from the growing …

When Optimal Isn’T Optimal, Robin Burk

Operations Management Presentations

Whether you’re an operations manager, a financial executive, an engineer, or an analyst, chances are you’ve been taught to optimize the outcomes of your decisions. And taken in a vacuum, that makes a good deal of sense. But as the new discipline of complex adaptive networks shows, in our heavily interconnected, interdependent world optimizing can introduce hidden vulnerabilities to surprisingly expensive failures. In this webinar we’ll discuss examples of such failures and identify conditions for which a satisfactory but not optimal solution is the best approach overall.

Bootstrap Statistics, Greg Hutto

Operations Management Presentations

Bootstrap Statistics is an intuitive approach to learning statistics because of its simplicity, freedom from assumptions and wide applicability. This webinar will refresh your knowledge of statistics and give you intuitive tools to apply concepts. We will deduce robust methods to build point estimates, interval estimates and assert differences or similarities. If time permits, we’ll even evaluate statistical power! And we’ll do it all with only one major assumption and no curtain of math or normal theory clouding our procedures. The webinar will be accompanied by three papers, tool references, slides and a sample data set with solutions.

Application Of Theory Of Constraints (Toc) In Managing Project Information Constraints, Ferdinand Z. Prantl

EMSE Doctoral Projects

The scope of this doctoral project is the non-traditional application of Drum-Buffer-Rope (DBR) from the area of Theory of Constraints (ToC) in mitigating disruption in distribution facilities during phased upgrades caused by information constraint. The relevance of this project is that industrial equipment upgrades pose a significant risk of disrupting the operation of automated distribution facilities. It is partly due to a very high expected availability rate, as well as tight coupling with other upstream and downstream elements of the larger supply chain network. As a consequence of disruption in this scenario, losses incurred not only within the facility being …

Innovative Solutions To Overcome Educational Lab Limitations, Farman A. Moayed

Department of Built Environment

No abstract provided.

A Comparison Of Sbir Investment Methods: Afwerx Vs Legacy, Evan A. Gist

Theses and Dissertations

The AFWERX Open Topic (AOT) program uses funding from the United States Air Force’s (USAF) Small Business Innovation and Research (SBIR) budget to adapt commercial technology to USAF needs. The AOT approach to small business investment is markedly different from that of legacy SBIR investment methods. This research is a comparison of processes and outcomes for AOT and legacy SBIR. The first axis of comparison is on commercialization rates. Applying a legacy definition of commercialization on a sample of AOT contracts, we found AOT’s commercialization to be 37% (compared to an 8.8% for legacy SBIR). We caveat this finding by …

Conduction Mapping For Quality Control Of Laser Powder Bed Fusion Additive Manufacturing, Chance M. Baxter

Theses and Dissertations

A process was developed to identify potential defects in previous layers of Selective Laser Melting (SLM) Powder Bed Fusion (PBF) 3D printed metal parts using a mid-IR thermal camera to track infrared 3.8-4 m band emission over time as the part cooled to ambient temperature. Efforts focused on identifying anomalies in thermal conduction. To simplify the approach and reduce the need for significant computation, no attempts were made to calibrate measured intensity, extract surface temperature, apply machine learning, or compare measured cool-down behavior to computer model predictions. Raw intensity cool-down curves were fit to a simplified functional form designed to …

Precise Measuring Cells For Quantitative And Qualitative Measurement, A.A. Begunov, B.M. Akhmedov, R.A. Ibragimov

Chemical Technology, Control and Management

The main provisions considered in assessing the accuracy of methods and measurement results are considered. It is shown that in the experimental assessment of various accuracy indicators, and also when analyzing the content of components in various gaseous media, the sorption-gravimetric measurement method is widely used, methods for measuring the mass of the sorbent and possible sources of error of this technique. Methods of measuring the mass of gas using specific surface areas, including taking into account the contact of gas with a solid material, and also, the amount of adsorbed gas and its pressure, temperature, type and size of …

Controlling And Forecasting The Reliability Of Integrated Circuits Of Radio Systems Transmitting Information, Abdulaziz M. Nazarov Prof, Dilmurod A. Davronbekov Prof.

Chemical Technology, Control and Management

The issues of forecasting the reliability of integrated circuits, which are the main element base of modern radio engineering information transmission systems, are considered. Methods of parametric and functional control are described to determine the correspondence of the static and dynamic parameters of microcircuits to the required values. A combined method for determining the operating parameters of microcircuits is also described. The advantage of this method in addition to the two above methods is indicated that it combines the function of controlling the operation of the entire control system. Two approaches for predicting reliability are given, as well as mathematical …

Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production, Nargis Shamadinova, Gulnora Abdukadirovna Tokhtakhunova Phd, Temur Azimovich Atakuziev, Shakhnoza Saidanvarovna Rakhimjanova

Chemical Technology, Control and Management

The influence of the additive of solid waste of soda production (SWSP) on the content of -C₂S and C₃S in cement studied. It was found that SWSP affects the density of the aluminum-containing minerals C₃A and C₄AF, in addition, in the presence of gypsum, their plasticizing properties improved. The introduction of SWSP additives during grinding of clinker intensifies the grinding process and made it possible to obtain a more plastic cement. It was proved that SWSP with CaCl₂ content can be used as an additive to concrete and cement mortars - …