Operations Research, Systems Engineering and Industrial Engineering Commons^™

Research Of A New Technological Flowsheet Parameters For Uranium Mining From Technogenic Uranium Ores, Nazarov Jamol, G.M. Allaberganova, H.L. Pulatov, A.M. Muzafarov

Chemical Technology, Control and Management

This paper presents the results of a study of the parameters of a new technological scheme for the extraction of uranium from technogenic uranium ores. The results of the analytical determination of the concentration of parent - ²³⁸U and daughter radionuclides - ²³⁴U , ²³⁰Th , ²²⁶Ra , ²²²Rn , ²¹⁸Pa , ²¹⁴Pb , etc. are presented . in the studied technogenic uranium ores. The principal scheme of the new uranium extraction technology from technogenic uranium ores is presented. The use of the classifier in a new scheme for separating granules of technogenic …

Assessment Of Metrological Errors Of Recognition Metrics In The Intelligent Control And Regulation System Of The Cotton Harvesting Machine, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Azizjon Abdulla Ugli Abdulhamidov

Chemical Technology, Control and Management

This article presents a method for assessing the error of metrics of an intelligent system for monitoring and regulating the width of the working gap of the harvesting apparatus of a cotton picker. To assess the error, the calculation of the average value of the standard deviation of metrics, absolute systematic and random errors, as well as absolute and relative total errors are used. The results of these calculations will allow us to determine the accuracy of the recognition system and opportunities for its improvement.

Decision-Making Algorithms For Drilling Instrument Control Systems, Fuzayl Fozil Ugli Odilov

Chemical Technology, Control and Management

The control of the movement of the drilling tool and the structure of the well are considered. An effective control algorithm for drilling systems that provides control of well trajectory parameters is analyzed. In technological processes, it is necessary to control several parameters or several systems at the same time. It is considered necessary to create decision-making algorithms for the formation of managerial effects for the control system of such technological processes. The controlled oriented type of the bottom of the drill string was analyzed. Work was carried out on the decision-making algorithm for the processing of control effects. The …

Algorithms And Models For Synthesis Of Elements Of Digital Information Systems, Odil Abdujalilovich Jumaev, M.T. Ismoilov, V.B. Pulatov, G.X. Rashidov

Chemical Technology, Control and Management

The development of algorithms for noise-tolerant and high-speed measurement systems involves an integrated approach that encompasses methods of data processing and transmission, as well as mechanisms for rapid response to changes. This paper presents the key principles and techniques used in such technologies. The information systems are thoroughly analyzed, including the use of signal processing techniques and their identification, filtering using various statistical techniques to determine signal parameters and the development of algorithms to analyze and classify signals. Critical aspects of the system such as performance, reliability, security and scalability are also evaluated. The paper discusses information system structures and …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Dynamic Characteristics Of Magnetoelectric Linear Actuators Of Control Systems, Мakhmudjon Muxamedovich Аbdullayev, Rasul Ernazar Ogli Abdiev

Chemical Technology, Control and Management

This paper presents the results of studies carried out on magnetoelectric drives that carry out linear movement, models of drives are built and, on their basis, studies of the main indicators associated with the movement of a linear armature are carried out, such as: speed of movement, acceleration, current values, voltage and traction force of the armature. Also presented are the results of a study of magnetoelectric linear motion drives based on an analysis of graphs of their dynamic characteristics.

Improving Technology For Producing Complex Fertilizer From Low-Grade Phosphorites Of The Central Kyzylkum, A.Zh. Allamuratova, A.U. Erkaev, A.M. Reimov, Saparbay Kazakhbaev, Dilshodbek Kurbiyazov

Chemical Technology, Control and Management

The methods of nitric acid processing of phosphate raw materials are analyzed. A technology has been developed for the nitric acid processing of phosphate raw materials into nitrogen-phosphorus fertilizer with the implementation of the process in a condensed pulp by adding sulfuric acid. A technology for producing complex fertilizers with a wide range of N:P₂O₅:K₂O ratios with improved physico-chemical parameters due to the introduction of various potassium salts into the process is proposed.

Synthesis Of Local Control Systems For Underwater Units Cleaning Bottom Sediments In Reservoirs, Yuriy Gennadiyevich Shipulin, Zebiniso Akmalovna Zayniddinova

Chemical Technology, Control and Management

The article discusses the issues of synthesizing local control systems for underwater units for cleaning bottom sediments in reservoirs. It is shown that the protection and rational use of natural reservoirs and the fight against their premature siltation is becoming an urgent task.

It is proposed to use small-sized underwater units, consisting of information and measuring devices, to carry out search work for cleaning bottom sediments under water; control systems; actuators and means of communication with humans.

It is shown that the task of controlling the loading of an underwater unit (UU) requires maintaining optimal performance while simultaneously taking into …

Algorithms For Structural Synthesis Of Control Systems For Dynamic Objects Under Conditions Of Unmeasurable Disturbances, Husan Zakirovich Igamberdiev, Uktam Farkhodovich Mamirov, Bunyod Mamurjon Ugli Buronov

Chemical Technology, Control and Management

The paper talks about ways to use inverse dynamic models to structure a control system for moving objects when disturbances are not measured. To solve the main problems that arise when implementing the inverse dynamic model method, methods for synthesizing inverse systems with given dynamic characteristics are used. The solution to this problem is obtained based on the theory that dynamic observers are invariant to unmeasured input influences. We broke down the matrix operator on the right into elementary orthogonal rotation matrices and on the left into permutation matrices to get a stable answer to the equation of the current …

Artificial Neural Network Based Grain Moisture Measuring Device, Erkin Eljaev, Shohrux Nurali O‘G‘Li Narzullayev, Elyor Faxriddinovich Khudoyberdiev

Chemical Technology, Control and Management

To date, the intellectualization of solving technical issues in managing, controlling, and measuring technological processes in all branches of industrial production is considered an urgent task. In this regard, a class of intelligent devices and sensors has emerged. Intelligent devices and sensors differ from their analog counterparts in that they have functions such as automatic adjustment of the measurement range, self-calibration, data processing, and decision-making. The article discusses the development of intelligent measuring instruments based on a capacitive transducer for measuring the moisture content of grain and grain products.

Synthesis Algorithm Of Control System Based On Neural Network For The Gas And Oil Process, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat, A.Z. Shodiyorov

Chemical Technology, Control and Management

Automatic control systems in the oil and gas processing are considered. After extraction of natural gas condensate, management of technological parameters plays an important role in its processing. Among the parameter of regulating algorithms, control based on neural network technology was considered. These control systems are created on the basis of algorithms of neural network technology. There are several structures of neural networks according to their structure. Differences in the process of information processing of these branching structures are considered.

An Optimization Tool For A Standalone Photovoltaic System, Johanes Kasilima

Tanzania Journal of Engineering and Technology (TJET)

Stand-alone photovoltaic systems (SAPV) are often used in remote areas where access to grid electricity is limited. This system depends on solar energy. However, Photovoltaic (PV) systems need a greater initial investment than conventional sources of energy, and their effectiveness is reliant on a number of environmental conditions such as the unpredictable solar radiation. One step in reducing the investment cost of a PV system is determining the optimal size of solar PV components that minimize costs. This paper presents a Particle Swarm based optimization tool for sizing Stand-alone PV systems. The optimization tool selects the optimal Levelized Cost of …

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

Synthesize A Neural Network Parameter Optimizer For An Adaptive Pid Controller, Nashvandova Gulruxsor Murot Qizi

Chemical Technology, Control and Management

Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of PID-regulator parameters with application of methods of neural network technology are considered. A methodology for selecting the architecture of neural network optimizer designed to determine the tuned parameters of PID regulator is proposed. The algorithm of training of the neural network, with the set on the basis of the method of inverse gradient propagation is offered. The proposed improved PID-neural regulator allowed to provide stabilization of neural network operation and its trainability in the control loop …

Analytical-Critical Review Of Widely Used Industrial Devices For Drying Mineral Fertilizers, Djalolitdin Paxritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary equipment selection for soluble fertilizers industrial drying on the basis of such criteria as productivity, efficiency, energy saving, environmental impact degree, indicating the possible advantages and disadvantages of different application variants.

Calculation Of Hydraulic Resistance Of A Tubular-Gridse Nozzle With Spiral Turbulizers, Nurmukhamedov Habibulla Sagdullaevich, Mavlonov Elbek Tulkinovich, S.Kh. Nishonova, Kh.S. Nurmukhamedov

Chemical Technology, Control and Management

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 …

Development Of A Criterion Assessing The Level Of Relationship Of Multiple Identified Characteristics For Classification, Mirzoyan Mirzaaxmedovich Kamilov, Oybek Zokirovich Koraboshev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern identification. The formation of the convex hull of the recognition operator and corrective procedures of information models by mutual compensation of each other was also studied. In addition, the functional connection of recognition operators and the definition of idempotent connection of operators are analyzed.

Chromatographic Analysis Of The Chemical Composition Of Pyrolysis Distillate, Sh.T. Juraev, B.F. Muxiddinov, U.T. Tailakov

Chemical Technology, Control and Management

The paper presents the results of a study of the physico-chemical characteristics of the liquid fraction of products of thermal oxidative pyrolysis of worn tires. The mass fraction of the volatile gas compounds, the optimal boiling points of the obtained condensates and the flashpoint of pyrolysis liquids, together with the mass composition of cracking products of rubber products at high-temperature pyrolysis at a temperature of 800-900 °C, were determined. Chromatographic analysis allowed us to determine the composition, mainly the mass composition of pyrolysis products, which consisted of carbon (42.8%), higher aliphatic and aromatic hydrocarbons (17.0%), methane (10.2%), benzene (4.2%) and …

Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov

Chemical Technology, Control and Management

A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach …

A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov

Chemical Technology, Control and Management

The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage systems. The first ones should meet the needs of the population quantitatively and qualitatively. As a result, in order to properly control these two important aspects, it is necessary to maintain an appropriate microclimatic environment using a computational decision support system (DSS) that is able to adapt to changes in environmental characteristics. The multilayer perceptron neural network (MLP-NN) was developed to simulate the temperature and relative humidity profiles …

Improvement Of Calorimetric Quality Analyzers For Substances, Makhfuza Azimovna Radjabova

Chemical Technology, Control and Management

It is noted that the development of intelligent means of measuring qualitative indices is of topical importance. Since the quality of many substances is determined by optical methods, an algorithm for spectrophotometric data processing has been developed, which consists of primary data processing (stage I) and determination of qualitative indices of liquid products (stage II). Since the task of numerical determination of colour characteristics of transmittance coefficients of liquid samples is incorrectly set, it is recommended to use regularization methods of A.N.Tikhonov to improve metrological characteristics of the device. On the basis of regularization methods for solving incorrect problems, algorithms …

Life Cycle Management Of A Technological Complex For Separating Multicomponent Mixtures Under Conditions Of Uncertainty Of Parameters, Yusuf Shodievich Avazov

Chemical Technology, Control and Management

The issue of control the lifecycle of technological complexes of multicomponent mixtures is considered, taking into account the uncertainty of parameters. Among uncertainties such as parameter uncertainty, model uncertainty, choice uncertainty under variability, spatial variability uncertainty, temporal variability uncertainty, inter-site variability uncertainty, more attention is paid to input parameter uncertainty and action uncertainty. The rectification technology is schematically presented, the influence of parameter uncertainty on the technological functions of the rectification complex. The scheme analyzes the control and assessment of “uncertainty” to repeat the lifecycle of the rectification complex and make changes to the components of the rectification complex technology. …

Mathematical Models And Calculation Of Parameters Of Optoelectronic Angular Displacement Converters, Yuriy Gennadyevich Shipulin, Azimjon Khusanov

Chemical Technology, Control and Management

The article discusses promising optoelectronic converters (OP) for wide application of angular movements. A methodology and diagram for calculating OP with the transverse movement of a moving element is presented; in order to simplify the calculation, the weight range of angular movements is conventionally divided into three sub ranges. A graph is given of the dependence of the area of the photosensitive surface of a photo resistor made from a single crystal of high-resistivity p-type silicon.

Intelligent Decision Support System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The article studies issues related to the development of intelligent systems located in an environment capable of perceiving this environment and acting autonomously to achieve assigned tasks. To create an intelligent process control system, it is necessary to monitor the mode to ensure high quality of finished products with minimal energy consumption at a given productivity of the entire complex. It is important to have a flow of input data to provide the system with operational information to support decision making.

The proposed intelligent control system makes it possible to analyze the results of production activities to make organizational and …

The Use Of Ultraviolet Radiation As A Means Of Destroying Microorganisms In Cherries, Jasur Safarov, Shaxnoza Sultanova, Pulatov M. Murodjon

Chemical Technology, Control and Management

The article discusses methods for extending the shelf life of cherries, having previously treated it with an ultraviolet ray. The article also presents the results obtained, which prove that the shelf life of cherries exposed to ultraviolet increases. At the same time, the article describes in detail the processing technique and presents the results of research.

Study Of Dynamic Characteristics Of The Mechanical Circuit Of The Developed Induction Inertial Vibration Transducer, Sulton Fayzullayevich Amirov, Asror Abdunabiyevich Shoimkulov

Chemical Technology, Control and Management

The article examines the dynamic characteristics of the mechanical circuit of the developed induction vibration transducer. It is found that in the investigated transducers forced oscillations occur with the frequency of the input disturbing force, the amplitude of forced oscillations does not depend on the initial conditions and time, and in forced oscillations with damping there is always a shift of the oscillation phase compared to the phase of the input disturbing force. It is shown that the induction vibration transducer reproduces the measured vibrations with small distortions only in a relatively narrow frequency region at frequencies of the input …

Improvements Of The Control System For The Technological Process Of Drying Bulk Materials, Azizbek Nodirbekovich, Dilmurod Ikromovich

Chemical Technology, Control and Management

The issues of convective drying of bulk materials as objects of monitoring, control and advanced management are presented based on the results of simulation modeling of a complex heat and mass transfer process, taking into account the drying kinetics. As a result of the work of a number of them, in the last few decades neat hypotheses were formed about moisture migration in and around dried materials, which led to the creation of accurate mathematical models of drying behavior, with successfully applied in a wide range of fields. The reasons for this are the dynamics of processes in the drying …

Application Of Quantum Algorithms In The Synthesis Of Dynamic Objects, Noilakhon Yakubova

Chemical Technology, Control and Management

Around the world, the food industry is focusing on achieving energy and resource efficiency. One of the main challenges in the field of process automation is the creation of effective control systems using intelligent technologies to improve the quality of processes and achieve the production of high-quality products with less energy and resources. Therefore, it is necessary to work with a large amount of data. Particular attention is paid to the development of computational algorithms for automated high-speed computational analysis systems for processing this data at high speed. Therefore, the article discusses the use of quantum computing methods in controlling …

System For Advanced Control Of Thermal Parameters Of Glass Furnaces, O'Tkir Xolmanov

Chemical Technology, Control and Management

The results of an analysis of the functioning of glass furnaces for melting semi-white or discolored glass as an object of automatic control and management are presented. Through experimental research, a parametric control scheme for a glass melting furnace was formed and a system for improved control of thermal glass melting processes was synthesized. The proposed system regulates the parameters of a furnace with a horseshoe-shaped flame development. Based on commercially produced instruments and automation equipment that ensure stabilization of thermal conditions of glass melting. The burner block control algorithm provides control over the performance of the gas burner, safety …

Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere

Tanzania Journal of Engineering and Technology (TJET)

The level of electricity generation in Nigeria is presently grossly inadequate. Consequently, the productive sectors of the economy do not presently enjoy an uninterrupted supply of electrical energy from the country’s national grid and the downtime is in most cases too much. Using diesel-fueled electric power generators has become an attractive alternative to meet the shortfall in the energy supply gap. In this study, the levels of polycyclic aromatic hydrocarbons in the vicinity of the diesel-fueled electric power generators operated by Osun State University, Osogbo, Nigeria were investigated with a view to ascertain the priority levels and carcinogenic PAHs. Since …