Nuclear Engineering Commons^™

Agenda: Energy Field Tour 2003, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

Congressional staff tour held August 11-16, 2003

Summary: Binder of assorted articles, maps, brochures and other materials prepared for participants of the tour

Contents:

MONDAY, AUGUST 11, 2003: BLUE SPRUCE PEAKER PLANT: University of Colorado Natural Resources Law Center : congressional staff tour of Blue Spruce Energy Center / Peggy Duxbury -- 'Power Struggle', National Journal, June 27, 2003 / Margaret Kritz -- 'Calpine's Blue Spruce Energy Center begins commercial operation', Calpine press release, April 17, 2003 -- NATIONAL RENEWABLE ENERGY LAB: NREL at a glance -- NREL technologies -- SHOSHONE HYDROELECTRIC PLANT: 'River District Board supports spring Shoshone call …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Ii Final Report, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The second phase has resulted in an experimental setup of a fluid flow experiment with experimentation to be completed in the third year. Some of these results were presented at American Nuclear Society, Student Conference April 2-5, …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #7, Georg F. Mauer

Fuels Campaign (TRP)

The seventh quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

• Mr. Richard Silva presented a paper on hot cell robotics at the ANS student conference in Berkeley, CA.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object recognition (Ph.D. Student Jae-Kyu Lee)

• Undergraduate student Jamil Renno, developed better control algorithms, and created simulations of pick and place actions for the hot …

Modeling, Fabrication, And Optimization Of Niobium Cavities Phase Ii: Third Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The second phase has resulted in an experimental setup of a fluid flow experiment with experimentation to be completed in the third year. Other experimental activities include the evaluation of a vacuum system and various vacuum equipment …

Total Dose Effects Of Ionizing And Non-Ionizing Radiation On Piezoresistive Pressure Transducer Chips, Samuel J. Willmon

Theses and Dissertations

The effects of ionizing and non ionizing radiation on the resistivity of silicon based, piezoresistive bulk micro-machined chips from pressure transducers were examined. Standard current-voltage (I-V) measurements were taken in-situ and post-irradiation during isothermal annealing at room temperature. One group of chips was irradiated to a maximum total gamma dose of lMrad(Si) in the 11,000 Ci (60) Co gamma cell at Ohio State University. The second group of chips was irradiated at the Ohio State University Research Reactor facility to a maximum total neutron dose of 4 Mrad(Si) using beam port Hi. The resistivity was shown to decrease during gamma …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #6, Georg F. Mauer

Fuels Campaign (TRP)

The sixth quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project. Rich is employed with Bechtel at the Yucca Mountain project.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control (Ph.D. Student Jae-Kyu Lee )

• An undergraduate senior student in mechanical engineering, Mr. Jamil Renno, was hired to develop the simulation model for the hot cell manipulator.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Final Phase, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. This is the third and final phase of the study.

The first phase has resulted in improving the basic understanding of multipacting and the process of chemical etching. The second phase has resulted in an experimental setup …

Modeling, Fabrication, And Optimization Of Niobium Cavities, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

One of the key technologies for the deployment of accelerator driven transmutation systems is the accelerator itself. To increase the efficiency of the high-power accelerators needed to support the transmutation mission, the national and international accelerator teams have proposed using elliptical superconducting niobium cavities. This project is tasked with examining the impacts of the design and fabrication technologies for these elliptical niobium cavities on their performance. Niobium was selected primarily due to its behavior at low temperatures.

One of the major sources of energy loss from a superconducting accelerator cavity is a process known as multiple impacting (or “multipacting”) of …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Ii Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch. A nonuniform surface etch will leave some unclean areas with contaminants and micron size particles. These significantly affect mutipacting. Further, a nonuniform etch will leave areas with damaged grain structure, which is not good for superconducting properties. Typically, the depth of chemical …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Ii, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces led to the use of a buffered chemical polishing procedure for surface cleaning to get good performance of the cavities. This proposal discusses the second phase of research in the second year of the project.

The first phase (starting Summer 2001) has resulted in improving the basic understanding of multipacting and the process of chemical etching. Based …

Modeling, Fabrication, And Optimization Of Niobium Cavities – Phase I: Quarterly Progress Report November 20, 2001 - February 20, 2002, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in RF superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch. A nonuniform surface etch will leave some unclean areas with contaminants and micron size particles. These significantly affect multipacting. Further, a nonuniform etch will leave areas with damaged grain structure, which is not good for superconducting properties. Typically, the depth of chemical …

Modeling, Fabrication, And Optimization Of Niobium Cavities, Robert A. Schill Jr., Mohamed Trabia, Yitung Chen

Transmutation Sciences Materials (TRP)

All technologies for the transmutation of nuclear waste require a large source of neutrons. One of the principal methods of generating these neutrons is by using a particle accelerator to bombard a heavy metal target. One of the more promising designs for particle accelerators for transmutation systems is the Superconducting Radio Frequency (RF) high-current linear accelerator (linac). The power supplies for these systems have three major components: niobium cavities, power couplers, and cryomodules. This research project will develop models to predict the behavior and performance of the niobium cavities, which will then be used to design and optimize the superconducting …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Ii Second Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. Up to this point, the second phase has resulted in the design of an experimental setup for the fluid flow experiment. Other experimental activities include the evaluation of a vacuum system are underway. Little reportable progress has …

Modeling, Fabrication, And Optimization Of Niobium Cavities – Phase I: Quarterly Progress Report August 20, 2001 - November 20, 2001, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch. A nonuniform surface etch will leave some unclean areas with contaminants and micron size particles. These significantly affect mutipacting. Further, a nonuniform etch will leave areas with damaged grain structure, which is not good for superconducting properties. Typically, the depth of chemical …

Modeling, Fabrication, And Optimization Of Niobium Cavities – Phase I: Quarterly Progress Report May 15, 2001 - August 15, 2001, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Multipacting is one of the major loss mechanisms in rf superconductivity cavities for accelerators. This loss mechanism limits the maximum amount of energy/power supported by the cavities. Optimal designs have been identified in others’ studies. In practice, these designs are not easily manufactured. Chemical etching processes used to polish the cavity walls result in a nonuniform surface etch compromising the optimal geometrical design. Past multipacting studies have not examined the impact of wall perturbations.

It is the purpose of this study to examine the chemical etching process in the design of niobium cavities so to maximize the surface quality of …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase I, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells and buffered chemical polishing produce good performance. The objective of the proposed research is to maximize the performance of the niobium cavities through studying multipacting, studying the effect of chemical etching on the surface roughness, and redesigning the cavities.

The US Congress has recently authorized exploring an alternative way to deal with spent nuclear fuel: Accelerator Transmuting of Waste (ATW). In this approach, a particle accelerator produces protons that react with …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Total Ionizing Dose Effects In Mosfet Devices At 77 K, Kevin J. Daul

Theses and Dissertations

Total ionizing dose effects on thermal oxide and reoxidized nitrided oxide (RNO) MOSFET devices at 77 K were studied. The MOSFETs were immersed in liquid nitrogen and irradiated, using a ⁶⁰Co source, up to 1 Mrad(Si) at a dose rate of 107 rads(Si)-sec. Drain current-gate voltage characteristics were obtained and used to determine threshold voltage and transconductance. At 77 K the subthreshold slopes indicated no observed buildup of interface states in any of the transistors. Furthermore, all transistors experienced very little change in the transconductance. Typical negative shifts in threshold voltage as dose increased were observed in all of …

Linear Characteristic Spatial Quadrature For Discrete Ordinates Neutral Particle Transport On Arbitrary Triangles, Dennis J. Miller

Theses and Dissertations

A new discrete ordinates spatial quadrature for arbitrary triangular cells is derived and compared to its rectangular cell linear characteristic counterpart. The triangular mesh is more flexible, allowing curved surfaces and off-axis angles to be approximated with many fewer spatial cells. The triangle method is consistently more accurate on example problems tested here. Arbitrary orientation and size of the triangles allow non-patterned meshes to be developed which appears to ameliorate numerical diffusion. The triangle linear characteristic quadrature converges at nearly the same rate as rectangular Linear characteristic on Lathrop's problem. Mesh sensitivity measurements show large variations in triangle vertex locations …

A Computer Simulation Of The Umr Reactor, H. Allen Wilkins

Opportunities for Undergraduate Research Experience Program (OURE)

The Opportunities for Undergraduate Research project entitled, "A Computer Simulation of the UMR Reactor" had two goals. To produce a reactor simulation to be used in creating an artificial intelligence based reactor simulation for the UMR Nuclear Reactor and to produce a means of teaching students the fundamentals of reactor operations.

The primary purpose was to create a program which would simulate all the situations one would encounter in actual reactor operation. With the simulator the artificial intelligence system could be thoroughly tested before use with actual reactor data.

This same simulator would be used as a teaching aid for …

Observation Of The Visible Absorption Spectrum Of H2o+, Biswajit Das, John W. Farley

Electrical & Computer Engineering Faculty Research

The Ã ² Ã₁–X̃ ² B̃₁ system of H₂O⁺ has been observed, using laser absorption spectroscopy in a velocity‐modulated discharge. A total of 78 transitions between 14 794 and 15 475 cm⁻¹ have been observed with an uncertainty (1 SD) of 0.02 cm⁻¹, including 76 transitions in the (0,7,0)–(0,0,0) band and 2 in the (0,8,0)–(0,0,0) band. This species is important for cometary astronomy, and intriguing for molecular physics because of its prominent Renner–Teller interaction. Careful measurements were made of the relative intensities of the absorption lines, …

Safety Related Model And Studies Of Trojan Nuclear Power Plant Electrical Distribution System, Hamidreza Sharifnia

Dissertations and Theses

The most important requirement for running a nuclear power plant safely is having a reliable safety system, especially during the emergency shutdown condition. For performing a scrutiny load flow and voltage drop study a detailed and comprehensive electrical model for the emergency electrical distribution system of the Trojan Nuclear Power Plant has been developed. This model includes the representation of the transformers, circuit breakers, motors, cables and load data from 4160 volts level down to the individual 480 volts loads.

Maine Yankee Shutdown Assessment: A Report To Governor Joseph E. Brennan, Maine State Planning Office

Maine Collection

Maine Yankee Shutdown Assessment: A Report to Governor Joseph E. Brennan

Maine State Planning Office, Maine Office of Energy Resources, Maine Public Advocate

Executive Department - May 1986

Contents: Legal Process / Decommissioning Constraints and Costs / Public and Economic Costs and Benefits / Apprendices

The Energy Needs Of The Developing Countries, Vaman Rao

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The energy needs of the developing countries are enormous. They will grow with the passage of time as the pace of economic development accelerates and those countries enter the industrial epoch. The sheer physical non-availability of coal and petroleum to most of them makes it obligatory to choose an unconventional resource as an energy-base. The nuclear fission is the only option now available which is feasible, less-expensive and plentiful. Solar and fusion may be the ultimate sources in the steady state, when appropriate technologies are developed.

4th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Energy Conservation In Uniroyal, Inc., John C. Madigan

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In the last year, rapid developments have led to the establishment of industry conservation goals and monitoring by the Department of Commerce and the Federal Energy Administration via the various industry associations.

Since 1972, Uniroyal has progressed more than half way toward the 1980 goal of 15% established for the rubber and chemical industries. This paper will describe details of the program with emphasis on new input, such as the computerized tracking method now in use.

Plant studies have provided an assessment of "base" loads vs. process loads, important when considering unit energy consumption. These vary, particularly with the climate …

The Energy Conservation Implications Of Master Metering Of Electric Service In Apartments, Gordon Gross

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A study has been made of the difference in electricity usage between residents of "Electricity included" apartments and those tenants who pay individual "light bills." The factors which influence owners' and builders' choices of metering service are discussed in detail.

Data taken from over 100 apartment buildings or complexes in 10 major U.S. metropolitan areas and from over 50 major electric power companies are used as the basis for the reported results. Contractors estimates of the costs to convert building service from master to individual meter and some bases for these costs are presented.

The energy conservation potential which might …

Energy Conservation Program At Ralston Purina, George A. Bossman

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

While the food industry as a whole uses only about 5 per cent of total manufacturing energy, we at Ralston Purina Company recognize our dependence upon energy and the importance of a strong energy management program. Last year, as part of this program, we established and implemented an energy conservation program designed to identify opportunities for conservation.

The major thrust of this program has been directed at manufacturing facilities where usages can be traced, wastes detected, and appropriate action taken. These are separate from a general overall corporate effort to make employees more energy conscious in every phase of their …

Energy Management In The Food Store, Paul Adams

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Food store refrigeration is vital to the food distribution system and consumes much of the energy used in a supermarket. The manufacturers of food store display equipment have worked long and hard to develop new ideas in supermarket energy conservation. Hussmann's studies have uncovered a number of facts invaluable to anyone concerned with energy conservation in the supermarket.

The first fact is to realize that supermarkets are different from any other retail stores. They consume more energy each year per sq. ft. of store - or per customer - or per dollar sales than other retail stores and most commercial …

Osmo - Power. Osmotic Work; Energy Production From Osmosis Of Fresh Water/Sea-Water Systems, H. H. G. Jellinek

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

It is imperative that new and ecologically acceptable energy sources are made available. Solar energy is a source which seems to be inexhaustible and free of pollution hazards. One vast source, which can be considered to be a solar energy source consists of the system fresh water/sea water. Fresh water is continually removed by the hydrological cycle where water evaporates from the ocean due to solar radiation and is eventually precipitated again in the form of fresh water feeding various rivers. Fresh water and ocean (salt) water mix when rivers flow into the oceans. The different chemical potentials are equalized …