Nanoscience and Nanotechnology Commons^™

Highly Sensitive Detection Of Strontium Ions Using Metal-Organic Frameworks Functionalized Solid-State Nanochannels, Xu-Gang Wang, Zheng-Xu He, De-Fang Ding, Xue-Qin Luo, Li Dai, Wei-Qi Zhang, Qun Ma, Yu Huang, Fan Xia

Journal of Electrochemistry

Strontium-90, a highly radioactive isotope, accumulates within the food chain and skeletal structure, posing significant risks to human health. There is a critical need for a sensitive detection strategy for Strontium-90 in complex environmental samples. Here, solid-state nanochannels, modified with metal-organic frameworks (MOF) and specific aptamers, were engineered for highly sensitive detection of strontium ion (Sr²⁺). The synergistic effect between the reduced effective diameter of the nanochannels due to MOF and the specific binding of Sr²⁺ by aptamers amplifies the difference in ionic current signals, enhancing detection sensitivity significantly. The MOF-modified nanochannels exhibit highly sensitive detection of …

Goodbye With Tears! Deep Condolences To Academician Zhao-Wu Tian!, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Adviser Of Journal Of Electrochemistry Professor Christian Amatore Received The Chinese Government Friendship Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Performance Of Ag‑Doped Cuo Nanoparticles For Photocatalytic Activity Applications: Synthesis, Characterization, And Antimicrobial Activity, Samar A. Salim, Ahmed Mosleh, Elbadawy A. Kamoun, Shahira H El-Moslamy, Heba Zahran, Samer Zyoud, Ibrahim Yahia

Nanotechnology Research Centre

The auto-combustion method synthesized CuO NPs and Ag/CuO NPs. The Ag/CuO NPs were analyzed using Fourier-transform infrared, X-ray difraction, scanning electron microscope, and Energy-dispersive X-ray spectroscopy instrumental analyses. The energy band gap, as determined by DRS properties, decreases from 3.82 to 3.50 eV for pure CuO and 10% Ag/CuO NPs, respectively. The photodegradation efciency of Rhodamine-B & Carmine by 10% Ag/CuO NPs was nearly 98.9 and 97.8%, respectively. Antimicrobial trials revealed that the antimicrobial efficacy of Ag/CuO NPs at several dosages (20, 40, 60, 80, 100, and 120 µg/mL) against human pathogens was initially assessed using the agar well-diffusion method, …

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Predictive Residual Neural Networks For Optical Trapping Of Small Particles, Nasim Mohammadi Estrakhri, Ponthea Zahraii, Saman Kashanchi, Nooshin M. Estakhri

Engineering Faculty Articles and Research

Optical tweezers provide a non-contact method to trap, move, and manipulate micro- and nano-sized objects. Using properly designed dielectric and plasmonic nanostructure configurations, optical tweezers have been tailored to create stable and precise trapping for nanoscale objects. Recent advances in numerical optimization techniques allow further enhancement in nanoscale optical traps through inverse optimization of such configurations. One of the main challenges in such optimization approaches is the time-consuming nature of full-wave simulation of nanostructures and postprocessing steps to extract optical forces. To address this challenge, we introduce a surrogate solver based on residual neural networks that can accurately predict the …

Substrate Interference And Strain In The Second-Harmonic Generation From Mose2 Monolayers, Sudeep Puri, Sneha Patel, Jose Luis Cabellos, Luis Enrique Rosas-Hernandez, Kaitlin Reynolds, Hugh O.H. Churchill, Salvador Barraza-Lopez, Bernardo S. Mendoza, Hiroyuki Nakamura

Physics Faculty Publications and Presentations

Nonlinear optical materials of atomic thickness, such as non-centrosymmetric 2H transition metal dichalcogenide monolayers, have a second-order nonlinear susceptibility (χ⁽²⁾) whose intensity can be tuned by strain. However, whether χ⁽²⁾ is enhanced or reduced by tensile strain is a subject of conflicting reports. Here, we grow high-quality MoSe₂ monolayers under controlled biaxial strain created by two different substrates and study their linear and nonlinear optical responses with a combination of experimental and theoretical approaches. Up to a 15-fold overall enhancement in second-harmonic generation (SHG) intensity is observed from MoSe₂ monolayers grown on SiO₂ when …

Deep-Learning Based Microstructure Reconstruction And Generation, Cameron J. Maloney, Lucas Taliaferro

College of Engineering Summer Undergraduate Research Program

Characterizing the microstructural behavior of materials is crucial for understanding their properties and performance. Traditional imaging methods, such as optical microscopy and electron microscopy, are effective but costly and time-consuming. Computational approaches can reduce costs and time while expanding the accessibility of microstructural analysis through the generation of new microstructure images. Traditional computational approaches, namely descriptor-based approaches, are slow but effective in low-data scenarios. Modern approaches use machine learning (ML), which is faster but often requires a lot of data to approach the performance of descriptor-based methods. This research leverages a special data-efficient Generative Adversarial Network (GAN) architecture to artificially …

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Design, Characterization, And Simulation Of A 2d Dual-Rail Quantum Processor, Diego Barrutia

Dartmouth College Master’s Theses

Bosonic systems, such as three-dimensional (3D) λ/4 coaxial cavities and two-dimensional (2D) λ/2 coplanar waveguide (CPW) resonators, are quantum harmonic oscillators that encode information in phase space, offering a hardware-efficient route toward quantum error correction and simulation in superconducting circuits. In this thesis, we present the design, characterization, and simulation of a dual-rail processor constructed with a 2D λ/2 coplanar waveguide resonators, demonstrating a percent error between experimental and analytical results within a range of 3.31% - 13.16%. The analytical results exhibit high precision but lower accuracy relative to experimental measurements. By integrating both closed-source and open-source software tools, we …

First-Principles Simulation Of The Interaction Between Dna Nucleotides And One-Dimensional Carbon Chain In Electrical Based Sequencing, Zeina Salman, Jin-Woo Kim, Steve Tung

Biological and Agricultural Engineering Faculty Publications and Presentations

Electrical DNA sequencing has attracted significant attention in recent years due to its simplified sequencing protocol, compact sequencing system, and relatively low sequencing cost. In the design and fabrication of the sequencing device, carbon-based nanomaterials such as graphene have been explored as a promising sensing material that provides an excellent combination of spatial resolution and base specificity. Using first-principles simulation, we determined the effect on the electrical conductivity of a one-dimensional carbon chain due to the presence of four DNA bases. The simulation results indicate that the interaction between the carbon chain and different DNA bases leads to different levels …

Nano-Enhanced Phase Change Materials: Fundamentals And Applications, Zafar Said, A. K. Pandey, Arun Kumar Tiwari, B. Kalidasan, Furqan Jamil, Amrit Kumar Thakur, V. V. Tyagi, Ahmet Sarı, Hafiz Muhammad Ali

Research outputs 2022 to 2026

Phase Change Materials (PCMs) enable thermal energy storage in the form of latent heat during phase transition. PCMs significantly improve the efficiency of solar power systems by storing excess energy, which can be used during peak demand. Likewise, they also contribute to reduced overall energy demand through passive thermal regulation. Nonetheless, thermal energy charging and discharging are restricted due to the low conducting nature of the energy storage medium. Various research investigations are being carried out to improve the thermal characteristics of PCMs through techniques such as a) dispersion of nanoparticles, b) inserting fins, and c) cascading PCMs. Among the …

Persistent Luminescent Nanoparticle-Loaded Filaments For Identification Of Fabrics In The Visible And Infrared, Brian Yust, Abdur Rahaman Sk, Antonios Kontsos, Brian George

College of Humanities and Sciences Faculty Papers

Persistent luminescent materials are those which can store an amount of energy locally and release it slowly in the form of light. In this work, persistent luminescent nanoparticles (PLNPs) were synthesized and incorporated into polypropylene (PP) filaments at various loading percentages. We investigated the optical properties of both the as-prepared PLNPs and the PLNP-loaded filaments, focusing on any changes resulting from the integration into the filaments. Specifically, visible and near-infrared spectroscopy were used to analyze the emission, excitation, and persistent luminescence of the PLNPs and PLNP-loaded filaments. The tensile properties of the extruded filaments were also investigated through breaking tenacity, …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Rate Law For Photoelectrochemical Water Splitting Over Cuo, Bo-Yuan Gao, Wen-Hua Leng

Journal of Electrochemistry

Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen. However, the determination of rate law is rarely reported. To this purpose, copper oxide (CuO) is selected as a model photocathode in this study, and the photogenerated surface charge density, interfacial charge transfer rate constant and their relation to the water reduction rate (in terms of photocurrent) were investigated by a combination of (photo)electrochemical techniques. The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density, and that the photocurrent equals to the product of the charge transfer rate constant …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Advancing Electrochemical Microsensors For Multiplexed Neurotransmitters And Environmental Toxins Detection, Sanjeev Billa

Doctoral Dissertations

Electrochemical sensors have emerged as a promising solution for monitoring neurotransmitters and heavy metals, which could ensure good health and safety in the environment. This dissertation focuses on advancement in the field of electrochemical microsensors by improving the electrode properties and sensor metrics such as rapid response time, multiplexing, high sensitivity, high selectivity, and accuracy for the real-time monitoring of neurotransmitters (glutamate and GABA) and heavy metals (cadmium and lead). In this dissertation, a novel silicon (Si) multifunctional biosensor probe with four platinum ultramicroelectrodes (UMEs) and an on-demand in situ calibration (ODIC) microfluidic channel was optimized for sub-second simultaneous real-time …

Micropatterning Of Biologically Derived Surfaces With Functional Clay Nanotubes, Nisha Lama

Doctoral Dissertations

In this study, we have generalized an assembly of 50 nm diameter clay nanotubes on larger 20-50 μm diameter biological microfibers such as human hair (protein), cotton (cellulose) and synthetic polyethylene terephthalate- PET. We developed a common set of parameters and nanoclay coating techniques on these naturally different microfibers. We exploited and optimized the electrostatic interaction of the components through strategic adjustments in the solvent pH, employing polycation treatment, as well as selectively modifying the halloysite nanotubes with silanes. For 5 mins, a 5 wt% aqueous dispersion of halloysite nanotubes were applied to get approximately 1-2 μm thick fiber coating …

Green Synthesis Of Carbonized Chitosan-Fe3o4-Sio2 Nano-Composite For Adsorption Of Heavy Metals From Aqueous Solutions, Dalia A. Ali Eng, Rinad Galal Ali Eng.

Chemical Engineering

Water pollution with heavy metals owing to industrial and agricultural activities have become a critical dilemma to humans, plants as well as the marine environment. Therefore, it is of great importance that the carcinogenic heavy metals present in wastewater to be eliminated through designing treatment technologies that can remove multiple pollutants. A novel green magnetic nano-composite called (Carbonized Chitosan-Fe3O4-SiO2) was synthesized using Co-precipitation method to adsorb a mixture of heavy metal ions included; cobalt (Co2+), nickel (Ni2+) and copper (Cu2+) ions from aqueous solutions. The novelty of this study was the synthesis of a new

nano-composite which was green with …

Validation, Optimization, And Experimentation Of Electro-Centrifugal Spinning, Carlos Alberto Delgado

Theses and Dissertations

The aim of this study is to understand the behavior of polymeric solutions, when exposed to both electric fields and centrifugal forces through the electro-centrifugal fiber creation method, observing both effects of various parameter variations on the resulting nanofibers. The elemental deposition on electrospun fibers through in-situ processes is studied and optimized. The morphology, crystallinity, thermal properties, and elemental composition of the nanofibers were characterized. The purpose of these nanofibers is for future applications such as energy harvesting, filtration, and biomedical applications.