Nanoscience and Nanotechnology Commons^™

A Mathematical Evaluation Of Hemodynamic Parameters After Carotid Eversion And Conventional Patch Angioplasty, Alexey Kamenskiy, Iraklis I. Pipinos, Yuris A. Dzenis, Prateek K. Gupta, Syed A. Jaffar Kazmi, Jason N. Mactaggart

Department of Mechanical and Materials Engineering: Faculty Publications

Carotid endarterectomy has a long history in stroke prevention, yet controversy remains concerning optimal techniques. Two methods frequently used are endarterectomy with patch angioplasty (CEAP) and eversion endarterectomy (CEE). The objective of this study was to compare hemodynamics-related stress and strain distributions between arteries repaired using CEAP and CEE. Mathematical models were based on in vivo three-dimensional arterial geometry, pulsatile velocity profiles, and intraluminal pressure inputs obtained from 16 patients with carotid artery disease. These data were combined with experimentally derived nonlinear, anisotropic carotid artery mechanical properties to create fluid-structure interaction models of CEAP and CEE. These models were then …

Effects Of Mode Coupling On The Admittance Of An At-Cut Quartz Thickness-Shear Resonator, Huijing He, Jiashi Yang, Wei-Ping Zhang, Ji Wang

Department of Mechanical and Materials Engineering: Faculty Publications

We study the effects of couplings to flexure and face-shear modes on the admittance of an AT-cut quartz plate thickness-shear mode resonator. Mindlin’s two-dimensional equations for piezoelectric plates are employed. Electrically forced vibration solutions are obtained for three cases: pure thickness-shear mode alone; two coupled modes of thickness shear and flexure; and three coupled modes of thickness shear, flexure, and face shear. Admittance is calculated and its dependence on the driving frequency and the length/thickness ratio of the resonator is examined. Results show that near the thickness-shear resonance, admittance assumes maxima, and that for certain values of the length/thickness ratio, …

Multi-Scale Characterization Of Nanostructured Sodium Aluminum Hydride, Shathabish Narasegowda

Doctoral Dissertations

Complex metal hydrides are the most promising candidate materials for onboard hydrogen storage. The practicality of this class of materials is counter-poised on three critical attributes: reversible hydrogen storage capacity, high hydrogen uptake/release kinetics, and favorable hydrogen uptake/release thermodynamics. While a majority of modern metallic hydrides that are being considered are those that meet the criteria of high theoretical storage capacity, the challenges lie in addressing poor kinetics, thermodynamics, and reversibility. One emerging strategy to resolve these issues is via nanostructuring or nano-confinement of complex hydrides. By down-sizing and scaffolding them to retain their nano-dimensions, these materials are expected to …

Synthesis And Characterization Of Transition Metal Arsenide Nanocrystals And The Metastability And Magneto-Structural Phase Transition Behavior Of Mnas Nanocrystals, Yanhua Zhang

Wayne State University Dissertations

This dissertation study focuses on (1) probing the magneto-structural phase transformation in nanoscale MnAs; (2) evaluation of the size-dependent phase stability of type-B MnAs (prepared by rapid injection); and (3) developing a general synthetic method for transition metal arsenide nanoparticles.

Discrete MnAs nanoparticles that adopt different structures at room temperature (type-A, α-structure and type-B, β-structure) have been prepared by the solution-phase arrested precipitation method. Atomic pair distribution and Rietveld refinement were employed on synchrotron data to explore the structural transitions of the bulk and nanoparticle samples, and these results were compared to AC magnetic susceptibility measurements of the samples. The …

Diffusive And Ballistic Thermo-Electric Transport, Ali Shakouri

Birck and NCN Publications

The efficiency of existing thermoelectric power generators is much lower than mechanical engines. We discuss the similarities and differences between solid-state thermoelectric devices and other thermal engines. In nanostructured materials, non-equilibrium energy and current transport could be important. We describe the transition between ballistic and diffusive regimes and how this can alter the thermoelectric effects and improve the energy conversion efficiency.

New Tools For The Direct Characterisation Of Finfets, G. C. Tettamanzi, A. Paul, S. Lee, Gerhard Klimeck, S. Rogge

Birck and NCN Publications

This paper discusses how classical transport theories such as the thermionic emission (Ref. [1]), can be used as a powerful tool for the study and the understanding of the most complex mechanisms of transport in Fin Field Effect Transistors (FinFETs). By means of simple current and differential conductance measurements, taken at different temperatures and different gate voltages (VG's), it is possible to extrapolate the evolution of important parameters such as the spatial region of transport and the height of thermionic barrier at the centre of the channel. Furthermore, if the measurements are used in conjunction with simulated data, it becomes …

Ultrasonication Assisted Layer-By-Layer Technology For The Preparation Of Multi-Functional Anticancer Drugs Paclitaxel And Lapatinib, Xingcai Zhang

Doctoral Dissertations

In this dissertation, ultrasonication assisted Layer-by-Layer (LbL) technology for the preparation of multifunctional poorly water-soluble anticancer drug nanoparticles, paclitaxel and lapatinib, has been developed. Many FDA approved drugs are very low soluble in water; therefore, it is very difficult to load and control their release and targeting efficiently, which greatly confines their application. The development of this method will pave the way for the development and application of those low soluble anticancer drugs.

In the first part of this dissertation, the first approach for powerful ultrasonication, the top-down approach (sonicating bulk drug crystals in polyelectrolyte solution), was successfully applied for …

Primary Pathways Of Intracellular Ca2+ Mobilization By Nanosecond Pulsed Electric Field, Iurii Semenov, Shu Xiao, Andrei G. Pakhomov

Bioelectrics Publications

Permeabilization of cell membranous structures by nanosecond pulsed electric field (nsPEF) triggers transient rise of cytosolic Ca²⁺ concentration ([Ca²⁺]_i), which determines multifarious downstream effects. By using fast ratiometric Ca²⁺ imaging with Fura-2, we quantified the external Ca²⁺ uptake, compared it with Ca²⁺ release from the endoplasmic reticulum (ER), and analyzed the interplay of these processes. We utilized CHO cells which lack voltage-gated Ca²⁺ channels, so that the nsPEF-induced [Ca²⁺]_i changes could be attributed primarily to electroporation. We found that a single 60-ns pulse caused fast [Ca2+]_i increase …

A Comparative Study Of The Dry And Wet Nano-Scale Electro-Machining, M. P. Jahan, K. R. Virwani, Kamlakar P. Rajurkar, A. P. Malshe

Department of Mechanical and Materials Engineering: Faculty Publications

In recent years, a nano-electromachining (nano-EM) process based on a scanning tunneling microscope (STM) platform has been demonstrated. Nano-EM is capable of machining nano-features, under both, liquid dielectric (wet nano-EM) and air dielectric (dry nano-EM) media. The objective of this paper is to present a comparative study between the wet and dry nano-EM processes based on process mechanism, machining performance, consistency and dimensional repeatability of these two processes. The comparison of the two processes has been conducted at near field nano-EM, where the gap between the tool electrode and workpiece is 2 nm and the machining is performed at room …

Inducing Neurite Outgrowth By Mechanical Cell Stretch, Suzanne Higgins, Jeong Soon Lee, Ligyeom Ha, Jung Yul Lim

Department of Mechanical and Materials Engineering: Faculty Publications

Establishing extracellular milieus to stimulate neuronal regeneration is a critical need in neuronal tissue engineering. Many studies have used a soluble factor (such as nerve growth factor or retinoic acid [RA]), micropatterned substrate, and electrical stimulation to induce enhanced neurogenesis in neuronal precursor cells. However, little attention has been paid to mechanical stimulation because neuronal cells are not generally recognized as being mechanically functional, a characteristic of mechanoresponsive cells such as osteoblasts, chondrocytes, and muscle cells. In this study, we performed proof-of-concept experiments to demonstrate the potential anabolic effects of mechanical stretch to enhance cellular neurogenesis. We cultured human neuroblastoma …

Systems Biology Of The Functional And Dysfunctional Endothelium, Jennifer Frueh, Nataly Maimari, Takayuki Homma, Sandra M. Bovens, Ryan M. Pedrigi, Leila Towhidi, Rob Krams

Department of Mechanical and Materials Engineering: Faculty Publications

This review provides an overview of the effect of blood flow on endothelial cell (EC) signalling pathways, applying microarray technologies to cultured cells, and in vivo studies of normal and atherosclerotic animals. It is found that in cultured ECs, 5–10% of genes are up- or down-regulated in response to fluid flow, whereas only 3–6% of genes are regulated by varying levels of fluid flow. Of all genes, 90%are regulated by the steady part of fluid flow and 10% by pulsatile components. The associated gene profiles show high variability from experiment to experiment depending on experimental conditions, and importantly, the bioinformatical …

Superconductivity In An Inhomogeneous Bundle Of Metallic And Semiconducting Nanotubes, Ilya Grigorenko, Anvar Zakhidov

Publications and Research

Using Bogoliubov-de Gennes formalism for inhomogeneous systems, we have studied superconducting properties of a bundle of packed carbon nanotubes, making a triangular lattice in the bundle's transverse cross-section. The bundle consists of a mixture of metallic and doped semiconducting nanotubes, which have different critical transition temperatures. We investigate how a spatially averaged superconducting order parameter and the critical transition temperature depend on the fraction of the doped semiconducting carbon nanotubes in the bundle. Our simulations suggest that the superconductivity in the bundle will be suppressed when the fraction of the doped semiconducting carbon nanotubes will be less than 0.5, which …

Nanopillar Array With A Λ/11 Diameter Fabricated By A Kind Of Visible Cw Laser Direct Lithography System, Chen Zhang, K. Wang, J. Bai, S. Wang, W. Zhao, F. Yang, C. Gu, Guiren Wang

Faculty Publications

Nanoscale functional structures are indispensable elements in many fields of modern science. In this paper, nanopillar array with a pillar diameter far smaller than Abbe's diffraction limit is realized by a new kind of continuous wave (CW) laser direct lithography technology. With atomic force microscopy technology, the average diameter of nanopillars on thin OIR906 photoresist film is about 65 nm and the smallest diameter is 48 nm, which is about 1/11 of the incident laser wavelength. Also, the influences of coma and astigmatism effects to the shape and size of nanopillar are numerically simulated by utilizing vector integral. As far …

Quantum Computing With Steady State Spin Currents, Brian Matthew Sutton

Open Access Theses

Many approaches to quantum computing use spatially confined qubits in the presence of dynamic fields to perform computation. These approaches are contrasted with proposals using mobile qubits in the presence of static fields. In this thesis, steady state quantum computing using mobile electrons is explored using numerical modeling. Firstly, a foundational introduction to the case of spatially confined qubits embodied via quantum dots is provided. A collection of universal gates implemented with dynamic fields is described using simulations. These gates are combined to implement a five-qubit Grover search to provide further insight on the time-dependent field approach. Secondly, the quantum …

Orientation Controllable Epitaxial Vapor-Liquid-Solid Semiconductor Nanowire Synthesis On Silicon Substrate, Sung Hwan Chung

Open Access Dissertations

Semiconductor nanowires synthesized via the vapor-liquid-solid (VLS) mechanism have attracted extensive research interest in recent years owing to their unique structure as a promising candidate for the future electronic devices. Germanium and silicon nanowires, in particular, are compatible with the current silicon-based technology via direct assembly. However, one of the main challenges for the successful nanowire application in large-scale is the lack of the method for obtaining nanowires in desired positions and directions. Therefore, the comprehensive, systematic understanding of epitaxial nanowire growth and the more suitable method to align nanowires on novel structure are required. In this work, the synthesis …

Novel Approach Of Using Polyvinylidene Fluoride Langmuir-Schaefer Film On Graphene-Polyaniline Nanocomposite For Supercapacitor Applications, Venkata Priyanka Bolisetty

USF Tampa Graduate Theses and Dissertations

Supercapacitors are well known for their improvised power density compared to batteries. Ongoing research is mainly focused on improving the energy density of supercapacitors by using different electrode material nanocomposites. The recent research has revealed that graphene (G)-polyaniline (PANI) nanocomposite could be a promising material for supercapacitor applications. The supercapacitor is also associated with self-leakage current regardless of any electrode material. The main objectives of the project are to: (i) synthesize highly fabricate supercapacitor based of G-PANI electrode; (ii) improve the energy density of supercapacitor by applying ultrathin monolayer/monolayers film electrode surface. It is crucial to either improve or retain …

Properties Of Peg, Ppg And Their Copolymers Influence On The Gap-Fill Characteristics Of Damascene Interconnects, Kevin Ryan

Legacy Theses & Dissertations (2009 - 2024)

A laboratory scale plating cell was built that provided reproducible bottom-up fill results for the electrochemical deposition of copper in damascene features. Several techniques used in the full wafer plating tool were incorporated into the setup to accurately control the process conditions. These techniques included but were not limited to a voltage controlled `hot-entry' step, a custom coupon holder to allow sample rotation, a secondary thief electrode and an automatic entry system. The results of qualification experiments are presented to demonstrate that precise control was realized along with repeatable partial fill plating results. The qualified setup was then used to …

Ion Beam Modification Of Single Crystal Sapphire For High Temperature Optical Waveguiding, William Spratt

Legacy Theses & Dissertations (2009 - 2024)

High temperature environments (>1000°C) provide a significant challenge for fiber optic based sensing due to the poor physical properties of silica fiber at elevated temperature. Not only does silica soften above 1000°C, but the dopants that are responsible for the refractive index change between the core and cladding diffuse, reducing the fibers effectiveness as a waveguide. Single-crystal sapphire fiber has the potential to supplement fiber sensing at high temperature however sapphire fiber is unclad and no cladding methods exist that withstand high temperatures. In addition to higher losses the lack of a cladding also leads to decreased sensitivity due …

Novel Resist Systems For Euv Lithography : Ler, Chain-Scission, Nanoparticle And More, Brian Cardineau

Legacy Theses & Dissertations (2009 - 2024)

Extreme Ultraviolet (EUV) lithography is currently the best option for replacing 193-nm lithography in future IC fabrication. For EUV to be successful, however, there are a number of challenges that must be overcome. Current resist designs struggle to meet the demands of future lithography nodes. We propose the best way to overcome these obstacles is through the design of novel resist systems.

Ion Beam Nano-Engineering Of Erbium Doped Silicon For Enhanced Light Emission At 1.54 Microns, Sebastian Naczas

Legacy Theses & Dissertations (2009 - 2024)

Erbium doped silicon is of great interest as a potential light source in Silicon Photonics research due to its light emission at 1.54 μm, which corresponds to the minimal loss of optical transmission in silica fibers for telecommunications. In this thesis a basic mechanism for excitation and de-excitation of Er in Si is reviewed. Based on such fundamental understanding, an innovative approach is proposed and implemented to improve Er luminescence properties through the formation of metal nanoparticles via impurity gettering in Si nanocavities.

Study Of Nickel Silicide Formation By Physical Vapor Deposition Techniques, Shanti Pancharatnam

Legacy Theses & Dissertations (2009 - 2024)

Metal silicides are used as contacts to the highly n-doped emitter in photovoltaic devices. Thin films of nickel silicide (NiSi) are of particular interest for Si-based solar cells, as they form at lower temperature and consume less silicon. However, interfacial oxide limits the reduction in sheet resistance. Hence, different diffusion barriers were investigated with regard to optimizing the conductivity and thermal stability.

White-Light And Infrared Emission From Sicxoy-Based Materials, Vasileios Nikas

Legacy Theses & Dissertations (2009 - 2024)

The development of a Si-based light source has attracted a high level of attention due to its potential unique advantages. For one, the monolithic integration of photonics on on-chip level along with the microelectronics devices would enhance the data processing rate. Additionally the cost per transmitted/processed information capacity can be significantly reduced.

Control Over Variability In Nonvolatile Hafnium-Oxide Resistive-Switching Memory Based On Modeling Of The Switching Processes, Brian Jerad Butcher

Legacy Theses & Dissertations (2009 - 2024)

Resistive random access memory (ReRAM) technology presents an attractive option for embedded non-volatile (NV) memory systems if its variability (cycle-to-cycle and device-to-device) can be controlled. This dissertation has focused on investigations to identify key mechanisms and parameters which dominate ReRAM variability, and the development of subsequent experimental and simulation-based tools to address this variability. The first component of these efforts entailed identification of the modern-day non-volatile memory technological gaps that have driven the operational requirements and challenges for resistive memory as an emerging NV memory.

Mueller Based Scatterometry And Optical Characterization Of Semiconductor Materials, Gangadhara Raja Muthinti

Legacy Theses & Dissertations (2009 - 2024)

Scatterometry is one of the most useful metrology methods for the characterization and control of critical dimensions (CD) and the detailed topography of periodic structures found in microelectronics fabrication processes. Spectroscopic ellipsometry (SE) and normal incidence reflectometry (NI) based scatterometry are the most widely used optical methodologies for metrology of these structures. Evolution of better optical hardware and faster computing capabilities led to the development of Mueller Matrix (MM) based Scatterometry (MMS). Dimensional metrology using full Mueller Matrix (16 element) scatterometry in the wavelength range of 245nm-1000nm was discussed in this work. Unlike SE and NI, MM data provides complete …

Microfluidic-Assisted Atomic Force Microscopy For The Mechanical Characterization Of Soft Biological Materials, Aaron Peter Mosier

Legacy Theses & Dissertations (2009 - 2024)

Viable methods for bacterial biofilm remediation require a fundamental understanding of biofilm mechanical properties and their dependence on dynamic environmental conditions. Mechanical test data, quantifying elasticity or adhesion, may be used to perform physical modeling of biofilm behavior, thus enabling the development of novel remediation strategies. To achieve real-time, dynamic measurements of these properties, a novel analysis platform consisting of a microfluidic flowcell device has been designed and fabricated for in situ analysis using atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). The flowcell consists of microfluidic channels for biofilm establishment that are then converted into an open …

Probe Immobilization Strategies And Device Optimization For Novel Transistor-Based Dna Sensors, Nicholas Michael Fahrenkopf

Legacy Theses & Dissertations (2009 - 2024)

The research presented herein exploits the terminal phosphate group on single stranded DNA molecules for direct immobilization to surfaces utilized in semiconductor device fabrication with the end goal of transistor based DNA sensors. As a demonstration of the feasibility of this immobilization strategy DNA immobilization to a variety of surfaces was evaluated for usefulness in biosensor applications. It was determined that DNA can be directly immobilized to a variety of semiconductor surfaces through the terminal phosphate group. Further, this immobilization allows for the hybridization of the immobilized DNA to complementary target in solution. The immobilization of DNA to hafnium dioxide …

Charged Particle Imaging Methods For Cd Metrology Of Sub 22nm 3d Device Structures, Aron Joel Cepler

Legacy Theses & Dissertations (2009 - 2024)

Critical dimension scanning electron microscopes (CD-SEMs) are used to perform highly accurate dimensional metrology on patterned features. In order to ensure optimal feedback for process control, it is necessary that these tools produce highly reproducible measurements. As the smallest device features continue to shrink, and new challenging high aspect ratio (HAR) structures are being introduced, gaps are appearing between process control measurements that are necessary for high volume manufacturing and the capabilities of the CD-SEM. Two possible routes for solving this problem include improvement of the existing CD-SEM technology or the replacement of the CD-SEM.

The Localized Manipulation Of The Extracellular Matrix Within 3d Collagen Cell Cultures Using A Biomems Device, Ashley N. Clark

Legacy Theses & Dissertations (2009 - 2024)

Approximately 90% of all cancer related deaths can be attributed to the occurrence of metastasis. There are multiple changes that occur within the tumor microenvironment that have been correlated with the onset of metastasis. Different cell types, extracellular matrices, blood vessels, and soluble factors are some of the various components that make up the complex, heterogeneous microenvironment that exists within a tumor. The dynamic relationship between tumor cells and their surrounding environment makes it an ideal environment to study triggers of metastasis, such as the modification of the extracellular matrix. Changes in the multiple aspects of extracellular matrix composition have …

Plasmonic-Based High Temperature Chemical Sensing Using Gold Nanoparticles Embedded In Metal Oxide Thin Films, Nicholas Joy

Legacy Theses & Dissertations (2009 - 2024)

Thin metal oxide films embedded with Au nanoparticles (AuNPs) have been investigated as high temperature localized surface plasmon resonance (LSPR) based sensing materials to monitor H₂, CO, and NO₂ at a temperature of 500°C. Applications for this technology include turbine engines as well as other combustion environments where it is important to monitor emission gases for both regulatory purposes as well as combustion control. These high temperature applications, which may be oxidizing or reducing in nature, present challenges to sensor reliability and selectivity, and have therefore necessitated the development of novel sensing devices. While there has been …

Impacts Of Ion Irradiation On Hfo2-Based Resistive Random Access Memory Devices, Xiaoli He

Legacy Theses & Dissertations (2009 - 2024)

The impacts of ion irradiation on so-called vacancy-change mechanism (VCM) and electrochemical-metallization mechanism (ECM) ReRAM devices based on HfO₂ are investigated using various ion sources: H+ (1 MeV), He+ (1 MeV), N+ (1MeV), Ne+ (1.6 MeV) and Ar+ (2.75 MeV) over a range of total doses (105 - 1011 rad(Si)) and fluences (1012 - 1015 cm-2). VCM-ReRAM devices show robust resistive switching function after all irradiation experiments. VCM resistive switching parameters including set voltage (V_set), reset voltage (V_reset), on-state resistance (R_on) and off-state resistance (R_off) exhibited, in most cases, modest changes …