Nanoscience and Nanotechnology Commons^™

First-Principles Analysis Of Zrn/Scn Metal/Semiconductor Superlattices For Thermoelectric Energy Conversion, Bivas Saha, Timothy D. Sands, Umesh V. Waghmare

Birck and NCN Publications

We present a first-principles density functional theory-based analysis of the electronic structure, vibrational spectra, and transport properties of ZrN/ScN metal/semiconductor superlattices aiming to understand its potential and suitability for thermoelectric applications. We demonstrate (a) the presence of Schottky barriers of 0.34 eV at the metal/semiconductor interface and (b) a large asymmetry in the electronic densities of states and flattening of electronic bands along the cross-plane directions near the Fermi energy of these superlattices, desirable for high Seebeck coefficient. The vibrational spectra of these superlattices show softening of transverse acoustic phonon modes along the growth direction and localization of ScN phonons …

Decomposition Of Unitary Matrices For Finding Quantum Circuits: Application To Molecular Hamiltonians, Anmer Daskin, Sabre Kais

Birck and NCN Publications

Constructing appropriate unitary matrix operators for new quantum algorithms and finding the minimum cost gate sequences for the implementation of these unitary operators is of fundamental importance in the field of quantum information and quantum computation. Evolution of quantum circuits faces two major challenges: complex and huge search space and the high costs of simulating quantum circuits on classical computers. Here, we use the group leaders optimization algorithm to decompose a given unitary matrix into a proper-minimum cost quantum gate sequence. We test the method on the known decompositions of Toffoli gate, the amplification step of the Grover search algorithm, …

Bifurcation-Based Mass Sensing Using Piezoelectrically-Actuated Microcantilevers, Vijay Kumar, J. William Boley, Yushi Yang, Hendrik Ekowaluyo, Jacob K. Miller, George T.C. Chiu, Jeff F. Rhoads

Birck and NCN Publications

In conventional implementations, resonant chemical and biological sensors exploit chemomechanically-induced frequency shifts, which occur in linear systems, for analyte detection. In this letter, an alternative sensing approach, based upon dynamic transitions across saddle-node bifurcations is investigated. This technique not only has the potential to render improved sensor metrics but also to eliminate frequency tracking components from final device implementations. The present work details proof-of-concept experiments on bifurcation-based sensing, which were conducted using selectively functionalized, piezoelectrically-actuated microcantilevers. Preliminary results reveal the proposed sensing technique to be a viable alternative to existing resonant sensing methods. (C) 2011 American Institute of Physics. [doi:10.1063/1.3574920]

Single Molecule In Vivo Analysis Of Toll-Like Receptor 9 And Cpg Dna Interaction, Jiji Chen, Suman Nag, Pierre-Alexandre Vidi, Joseph Irudayaraj

Birck and NCN Publications

Toll-like receptor 9 (TLR9) activates the innate immune system in response to oligonucleotides rich in CpG whereas DNA lacking CpG could inhibit its activation. However, the mechanism of how TLR9 interacts with nucleic acid and becomes activated in live cells is not well understood. Here, we report on the successful implementation of single molecule tools, constituting fluorescence correlation/cross-correlation spectroscopy (FCS and FCCS) and photon count histogram (PCH) with fluorescence lifetime imaging (FLIM) to study the interaction of TLR9-GFP with Cy5 labeled oligonucleotide containing CpG or lacking CpG in live HEK 293 cells. Our findings show that i) TLR9 predominantly forms …

Full Dispersion Versus Debye Model Evaluation Of Lattice Thermal Conductivity With A Landauer Approach, Changwook Jeong, Supriyo Datta, Mark S. Lundstrom

Birck and NCN Publications

Using a full dispersion description of phonons, the thermal conductivities of bulk Si and Bi(2)Te(3) are evaluated using a Landauer approach and related to the conventional approach based on the Boltzmann transport equation. A procedure to extract a well-defined average phonon mean-free-path from the measured thermal conductivity and given phonon-dispersion is presented. The extracted mean-free-path has strong physical significance and differs greatly from simple estimates. The use of simplified dispersion models for phonons is discussed, and it is shown that two different Debye temperatures must be used to treat the specific heat and thermal conductivity (analogous to the two different …

Electronic Structure, Vibrational Spectrum, And Thermal Properties Of Yttrium Nitride: A First-Principles Study, Bivas Saha, Timothy D. Sands, Umesh V. Waghmare

Birck and NCN Publications

Yttrium nitride (YN) is a promising semiconductor for use in metal/semiconductor superlattices for thermoelectric applications. We determine its electronic structure, vibrational spectrum, and thermal properties using first-principles density functional theory (DFT) based simulations with a generalized gradient approximation (GGA) of the exchange correlation energy. We employ GGA+U and GW approximations in our calculations to (a) improve the accuracy of the calculation of bandgaps and (b) determine specific features of its electronic structure relevant to transport properties, such as transverse (m(t)*) and longitudinal (m(1)*) conduction band effective mass. To evaluate consequences of forming alloys of YN with other materials to its …

A Modeling And Simulation Framework For Electrokinetic Nanoparticle Treatment, James Phillips

Doctoral Dissertations

The focus of this research is to model and provide a simulation framework for the packing of differently sized spheres within a hard boundary. The novel contributions of this dissertation are the cylinders of influence (COI) method and sectoring method implementations. The impetus for this research stems from modeling electrokinetic nanoparticle (EN) treatment, which packs concrete pores with differently sized nanoparticles. We show an improved speed of the simulation compared to previously published results of EN treatment simulation while obtaining similar porosity reduction results. We mainly focused on readily, commercially available particle sizes of 2 nm and 20 nm particles, …

Ionic Current Rectification Phenomena In Asymmetrical Polymer Nanopores Under Salt Gradients, Murat Bakirci

Mechanical & Aerospace Engineering Theses & Dissertations

The magnitude of current through a conical nanopore filled with an electrolyte solution depends on the polarity of the applied bias, indicating an asymmetric diode-like current-voltage (I-V) curve. This kind of phenomenon refers to ionic current rectification (ICR), which is of interest because many ion-channel proteins in cellular membranes are rectifying. In addition, ICR in nanopores can be used to control ion concentrations in nano- and microfluidic systems. In this study, the ICR phenomenon through a conical nanopore simultaneously subjected to an electric field and salt concentration gradient is experimentally and numerically investigated.

The experiments were conducted in an Izon's …

An Atomistic Study Of Thermal Conductance Across A Metal-Graphene Nanoribbon Interface, Zhen Huang, Timothy S. Fisher, Jayathi Y. Murthy

Birck and NCN Publications

This paper presents an atomistic Green's function study of phonon transport through a heterogeneous interface between bulk TiC substrates and graphene nanoribbons (GNRs). The force constants that govern the lattice dynamical equations are obtained from first-principles density functional theory (DFT) calculations and then optimized for the Green's function formulation. Phonon vibrational properties of TiC and GNRs are investigated by lattice dynamics calculations with optimized force constants that correlate well to direct DFT results. Thermal conductances of TiC-GNR-TiC systems are studied together with TiC-GNR structures. The conductances of TiC-GNR interfaces are normalized by ribbon width and are found to converge. The …

Calculation Of Single Chain Cellulose Elasticity Using Fully Atomistic Modeling, Xiawa Wu, Robert Moon, Ashlie Martini

Birck and NCN Publications

Cellulose nanocrystals, a potential base material for green nanocomposites, are ordered bundles of cellulose chains. The properties of these chains have been studied for many years using atomic-scale modeling. However, model predictions are difficult to interpret because of the significant dependence of predicted properties on model details. The goal of this study is to begin to understand these dependencies. We focus on the investigation on model cellulose chains with different lengths and having both periodic and nonperiodic boundary conditions, and predict elasticity in the axial (chain) direction with three commonly used calculation methods. We find that chain length, boundary conditions, …

Synthesis Of Ald Zinc Oxide And Thin Film Materials Optimization For Uv Photodetector Applications, Kandabara Nouhoum Tapily

Electrical & Computer Engineering Theses & Dissertations

Zinc oxide (ZnO) is a direct, wide bandgap semiconductor material. It is thermodynamically stable in the wurtzite structure at ambient temperature conditions. ZnO has very interesting optical and electrical properties and is a suitable candidate for numerous optoelectronic applications such as solar cells, LEDs and UV-photodetectors. ZnO is a naturally n-type semiconductor. Due to the lack of reproducible p-type ZnO, achieving good homojunction ZnO-based photodiodes such as UV-photodetectors remains a challenge. Meanwhile, heterojunction structures of ZnO with p-type substrates such as SiC, GaN, NiO, AlGaN, Si etc. are used; however, those heterojunction diodes suffer from low efficiencies. ZnO is an …

Manipulating Particles For Micro- And Nano-Fluidics Via Floating Electrodes And Diffusiophoresis, Sinan Eren Yalcin

Mechanical & Aerospace Engineering Theses & Dissertations

The ability to accurately control micro- and nano-particles in a liquid is fundamentally useful for many applications in biology, medicine, pharmacology, tissue engineering, and microelectronics. Therefore, first particle manipulations are experimentally studied using electrodes attached to the bottom of a straight microchannel under an imposed DC or AC electric field. In contrast to a dielectric microchannel possessing a nearly-uniform surface charge, a floating electrode is polarized under the imposed electric field.

The purpose is to create a non-uniform distribution of the induced surface charge, with a zero-net-surface charge along the floating electrode's surface. Such a field, in turn, generates an …

Direct Current Electrokinetic Particle Transport In Micro/Nano-Fluidics, Ye Ai

Mechanical & Aerospace Engineering Theses & Dissertations

Electrokinetics has been widely used to propel and manipulate particles in micro/nano-fluidics. The first part of this dissertation focuses on numerical and experimental studies of direct current (DC) electrokinetic particle transport in microfluidics, with emphasis on dielectrophoretic (DEP) effect. Especially, the electrokinetic transports of spherical particles in a converging-diverging microchannel and an L-shaped microchannel, and cylindrical algal cells in a straight microchannel have been numerically and experimentally studied. The numerical predictions are in quantitative agreement with our own and other researchers' experimental results. It has been demonstrated that the DC DEP effect, neglected in existing numerical models, plays an important …

Fabrication Of Poly(Vinylidene Fluoride) (Pvdf) Nanofibers Containing Nickel Nanoparticles As Future Energy Server Materials, Faheem A. Sheikh, Travis Cantu, Javier Macossay-Torres, Hern Kim

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

In the present study, we introduce Poly(vinylidene fluoride) (PVDF) nanofibers containing nickel (Ni) nanoparticles (NPs) as a result of an electrospinning. Typically, a colloidal solution consisting of PVDF/Ni NPs was prepared to produce nanofibers embedded with solid NPs by electrospinning process. The resultant nanostructures were studied by SEM analyses, which confirmed well oriented nanofibers and good dispersion of Ni NPs over them. The XRD results demonstrated well crystalline feature of PVDF and Ni in the obtained nanostructures. Physiochemical aspects of prepared nano-structures were characterized for TEM which confirmed nanofibers were welloriented and had good dispersion of Ni NPs. Furthermore, the …

Distributed Negf Algorithms For The Simulation Of Nanoelectronic Devices With Scattering, Stephen Cauley, Mathieu Luisier, Venkataramanan Balakrishnan, Gerhard Klimeck, Cheng-Kok Koh

Birck and NCN Publications

Through the Non-Equilibrium Green’s Function (NEGF) formalism, quantum- scale device simulation can be performed with the inclusion of electron-phonon scattering. However, the simulation of realistically sized devices under the NEGF formalism typically requires prohibitive amounts of memory and computation time. Two of the most demanding computational problems for NEGF simulation involve mathematical operations with structured matrices called semiseparable matrices. In this work, we present parallel approaches for these computational problems which allow for efficient distribution of both memory and computation based upon the underlying device structure. This is critical when simulating realistically sized devices due to the aforementioned computational burdens. …

Subband Engineering For P-Type Silicon Ultra-Thin Layers For Increased Carrier Velocities: An Atomistic Analysis, Neophytos Neophytou, Gerhard Klimeck

Birck and NCN Publications

Ultra-thin-body (UTB) channel materials of a few nanometers in thickness are currently considered as candidates for future electronic, thermoelectric, and optoelectronic applications. Among the features that they possess, which make them attractive for such applications, their confinement length scale, transport direction, and confining surface orientation serve as degrees of freedom for engineering their electronic properties. This work presents a comprehensive study of hole velocities in p-type UTB films of widths from 15 nm down to 3 nm. Various transport and surface orientations are considered. The atomistic sp3d5s*-spin-orbit-coupled tight-binding model is used for the electronic structure, and a semiclassical ballistic model …

Subband Engineering For P-Type Silicon Ultra-Thin Layers For Increased Carrier Velocities: An Atomistic Analysis, Neophytos Neophytou, Gerhard Klimeck, Hans Kosina

Other Nanotechnology Publications

Ultra-thin-body (UTB) channel materials of a few nanometers in thickness are currently considered as candidates for future electronic, thermoelectric, and optoelectronic applications. Among the features that they possess, which make them attractive for such applications, their confinement length scale, transport direction, and confining surface orientation serve as degrees of freedom for engineering their electronic properties. This work presents a comprehensive study of hole velocities in p-type UTB films of widths from 15 nm down to 3 nm. Various transport and surface orientations are considered. The atomistic sp3d5s*-spin-orbit-coupled tight-binding model is used for the electronic structure, and a semiclassical ballistic model …

Atomistic Study Of Electronic Structure Of Pbse Nanowires, Abhijeet Paul, Gerhard Klimeck

Birck and NCN Publications

Lead Selenide (PbSe) is an attractive ‘IV-VI’ semiconductor material to design optical sensors, lasers and thermoelectric devices. Improved fabrication of PbSe nanowires (NWs) enables the utilization of low dimensional quantum effects. The effect of cross-section size (W) and channel orientation on the bandstructure of PbSe NWs is studied using an 18 band sp3d5 tight-binding theory. The bandgap increases almost with the inverse of the W for all the orientations indicating a weak symmetry dependence. [111] and [110] NWs show higher ballistic conductance for the conduction and valence band compared to [100] NWs due to the significant splitting of the projected …

Atomistic Study Of Electronic Structure Of Pbse Nanowires, Abhijeet Paul, Gerhard Klimeck

Birck and NCN Publications

Lead Selenide (PbSe) is an attractive ‘IV-VI’ semiconductor material to design optical sensors, lasers and thermoelectric devices. Improved fabrication of PbSe nanowires (NWs) enables the utilization of low dimensional quantum effects. The effect of cross-section size (W) and channel orientation on the bandstructure of PbSe NWs is studied using an 18 band sp3d5 tight-binding theory. The bandgap increases almost with the inverse of the W for all the orientations indicating a weak symmetry dependence. [111] and [110] NWs show higher ballistic conductance for the conduction and valence band compared to [100] NWs due to the significant splitting of the projected …

Polarity Effects In The X-Ray Photoemission Of Zno And Other Wurtzite Semiconductors, M. W. Allen, Dmitry Zemlyanov, G.I.N. Waterhouse, J. B. Metson, T. D. Veal, C. F. Mcconville, S. M. Durbin

Birck and NCN Publications

Significant polarity-related effects were observed in the near-surface atomic composition and valence band electronic structure of ZnO single crystals, investigated by x-ray photoemission spectroscopy using both Al K(alpha) (1486.6 eV) and synchrotron radiation (150 to 1486 eV). In particular, photoemission from the lowest binding energy valence band states was found to be significantly more intense on the Zn-polar face compared to the O-polar face. This is a consistent effect that can be used as a simple, nondestructive indicator of crystallographic polarity in ZnO and other wurtzite semiconductors. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3562308]

Superlattice Ultrasonic Generation, Thomas E. Wilson, M. Oehme, E. Kasper, H-J. L. Gossmann

Physics Faculty Research

We report the first experimental evidence for the resonant excitation of coherent high-frequency acoustic phonons in semiconducting doping superstructures by far-infrared laser radiation. After a grating-coupled delta-doped silicon doping superlattice is illuminated with ~1 kW/mm² nanosecond-pulsed 246 GHz laser radiation, a delayed nanosecond pulse is detected by a superconducting bolometer at a time corresponding to the appropriate time-of-flight for ballistic longitudinal acoustic phonons across the (100) silicon substrate. The absorbed phonon power density in the microbolometer is observed to be ~10 μW/mm², in agreement with theory. The phonon pulse duration also matches the laser pulse duration. The …

Coherent Electron Transport By Adiabatic Passage In An Imperfect Donor Chain, Rajib Rahman, Richard P. Muller, James E. Levy, Malcolm S. Carroll, Gerhard Klimeck, Andrew D. Greentree, Lloyd C. L. Hollenberg

Birck and NCN Publications

Coherent tunneling adiabatic passage 􏰀CTAP􏰁 has been proposed as a long-range physical quantum bits 􏰀qubit􏰁 transport mechanism in solid-state quantum computing architectures. Although the mechanism can be implemented in either a chain of quantum dots or donors, a one-dimensional chain of donors in Si is of particular interest due to the natural confining potential of donors that can, in principle, help reduce the gate densities in solid-state quantum computing architectures. Using detailed atomistic modeling, we investigate CTAP in a more realistic triple donor system in the presence of inevitable fabrication imperfections. In particular, we investigate how an adiabatic pathway for …

Effects Of Gate-Last And Gate-First Process On Deep Submicron Inversion-Mode Ingaas N-Channel Metal-Oxide-Semiconductor Field Effect Transistors, J. J. Gu, Y. Q. Wu, Peide D. Ye

Birck and NCN Publications

Recently, encouraging progress has been made on surface-channel inversion-mode In-rich InGaAs NMOSFETs with superior drive current, high transconductance and minuscule gate leakage, using atomic layer deposited (ALD) high-k dielectrics. Although gate-last process is favorable for high-k/III-V integration, high-speed logic devices require a self-aligned gate-first process for reducing the parasitic resistance and overlap capacitance. On the other hand, a gate-first process usually requires higher thermal budget and may degrade the III-V device performance. In this paper, we systematically investigate the thermal budget of gate-last and gate-first process for deep-submicron InGaAs MOSFETs. We conclude that the thermal instability of (NH(4))(2)S as the …

Chemical Response Of Lithiated Graphite With Deuterium Irradiation, C. N. Taylor, B. Heim, Jean Paul Allain

Birck and NCN Publications

Lithium wall conditioning has been found to enhance plasma performance for graphite walled fusion devices such as TFTR, CDX-U, T-11M, TJ-II and NSTX. Among observed plasma enhancements is a reduction in edge density and reduced deuterium recycling. The mechanism by which lithiated graphite retains deuterium is largely unknown. Under controlled laboratory conditions, X-ray photoelectron spectroscopy (XPS) is used to observe the chemical changes that occur on ATJ graphite after lithium deposition. The chemical state of lithiated graphite is found to change upon deuterium irradiation indicating the formation Li-O-D, manifest at 532.9 +/- 0.6 eV. Lithium-deuterium interactions are also manifest in …

Accurate Six-Band Nearest-Neighbor Tight-Binding Model For The Π-Bands Of Bulk Graphene And Graphene Nanoribbons, Timothy B. Boykin, Mathieu Luisier, Gerhard Klimeck, Xueping Jiang, Neerav Kharche, Yu Zhou, Saroj K. Nayak

Birck and NCN Publications

Accurate modeling of the ␣-bands of armchair graphene nanoribbons (AGNRs) requires correctly reproducing asymmetries in the bulk graphene bands as well as providing a realistic model for hydrogen passivation of the edge atoms. The commonly used single-pz orbital approach fails on both these counts. To overcome these failures we introduce a nearest-neighbor, three orbital per atom p/d tight-binding model for graphene. The parameters of the model are fit to first-principles density-functional theory (DFT) – based calculations as well as to those based on the many-body Green’s function and screened-exchange (GW) formalism, giving excellent agreement with the ab initio AGNR bands. …

A Titanium-Supported Nanoporous Pd Electrocatalyst For Methanol Oxidation, Feng-Juan Niu, Qing-Feng Yi

Journal of Electrochemistry

Titanium-supported nanoporous palladium electrode(nanoPd /Ti) was prepared by a hydrothermal process in the presence of the ligand EDTA and using formaldehyde as reducing agent.SEM images showed that the size of Pd particles was about 60 nm and the Pd particles were connected with each other to form a three-dimensional network structure.Cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) were applied to evaluate the electrocatalytic activity of the nanoPd/Ti electrode towards methanol oxidation in alkaline solution.CV results showed that the nanoPd /Ti electrode presented high anodic peak densities and a low onset potential for methanol oxidation.Also nanoPd /Ti electrode showed excellent CO tolerance …

Electrocatalytic Oxidation Of Hydrazine At Rutin Carbon Nanotubes Modified Electrode, Hong-Fang Zhang, Qing-Lin Sheng, Jian-Bin Zheng

Journal of Electrochemistry

The electrochemical behavior and electrocatalytic oxidation of hydrazine on rutin multiwall carbon nanotubes modified glassy carbon electrode were studied by cyclic voltammetry.The experimental results indicated that the electrode exhibits good electrocatalytic activity to hydrazine at a reduced oxidation potential of 262 mV.The amperometric response of the modified electrode showed linear increase after successive addition of hydrazine in the concentration range of 2.5×10^-6~1.0×10^-4 mol·L-1 with a detection limit of 5×10^-7 mol·L^-1.

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

The Raman spectroscopy has been widely used in the study of lithium ion batteries.In this short review,we gave some examples of the applications of Raman spectroscopy in the study of electrode materials including carbonaceous materials,spinel LiM_xMn_2-x O₄,LiFePO₄,as well as polymer electrolytes,room temperaturemolten salt electrolytes and the solid-electrolyte interphase layers.The advantages and disadvantages of the ex-situ and in-situ Raman spectrum techniques are discussed.Using new Raman techniques to investigate Li-ion batteries are suggested.

Surface-Enhanced Raman Imaging Of Intracellular Bioreduction Of Chromate In Shewanella Oneidensis, Sandeep P. Ravindranath, Kristene Henne, Dorothea Thompson, Joseph Irudayaraj

Birck and NCN Publications

This proposed research aims to use novel nanoparticle sensors and spectroscopic tools constituting surface-enhanced Raman spectroscopy (SERS) and Fluorescence Lifetime imaging (FLIM) to study intracellular chemical activities within single bioremediating microorganism. The grand challenge is to develop a mechanistic understanding of chromate reduction and localization by the remediating bacterium Shewanella oneidensis MR-1 by chemical and lifetime imaging. MR-1 has attracted wide interest from the research community because of its potential in reducing multiple chemical and metallic electron acceptors. While several biomolecular approaches to decode microbial reduction mechanisms exist, there is a considerable gap in the availability of sensor platforms to …

The Composite Materials Manufacturaing Hub - Crowd Sourcing As The Norm, R. Byron Pipes, Gerhard Klimeck, Mark R. Pipes

Birck and NCN Publications

The Composites Manufacturing HUB puts compo- sites manufacturing simulations in the hands of those who need them to invent new and innovative ways to capture the extraordinary benefits of these high perfor- mance products at an acceptable manufactured cost. The HUB provides the user simple browser access to power- ful tools that simulate the actual steps and outcome con- ditions of a complex manufacturing process without the need to download and maintain software in the conven- tional manner. Learning use of the manufacturing simu- lation tools will also be accomplished on the HUB in or- der to allow for continuous …