Nanoscience and Nanotechnology Commons^™

Cost-Effective Imprint Template Fabrication For Step And Flash Imprint Lithography, Adam Marc Munder

Legacy Theses & Dissertations (2009 - 2024)

The College of Nanoscale Science and Engineering (CNSE) is studying imprint template fabrication with the 100kV Vistec VB300 Gaussian E-Beam writer. The major goal is to develop and advance imprint template fabrication technology using low cost quartz wafers for proof-of-concept demonstrations.

Role Of Interface Band Structure On Hot Electron Transport, John J. Garramone

Legacy Theses & Dissertations (2009 - 2024)

Knowledge of electron transport through materials and interfaces is fundamentally and technologically important. For example, metal interconnects within integrated circuits suffer increasingly from electromigration and signal delay due to an increase in resistance from grain boundary and sidewall scattering since their dimensions are becoming shorter than the electron mean free path. Additionally, all semiconductor based devices require the transport of electrons through materials and interfaces where scattering and parallel momentum conservation are important. In this thesis, the inelastic and elastic scattering of hot electrons are studied in nanometer thick copper, silver and gold films deposited on silicon substrates. Hot electrons …

Applying X-Ray Microscopy And Finite Element Modeling (Fem) To Identify The Mechanism Of Stress-Assisted Void Growth In Through Silicon Via (Tsv), Lay Wai Kong

Legacy Theses & Dissertations (2009 - 2024)

Fabricating through-silicon vias (TSVs) is challenging, especially for conformally filled TSVs, often hampered by the seam line and void inside the TSVs. Stress-assisted void growth in TSVs has been studied by finite element stress modeling and X-ray computed tomography (XCT). Because X-ray imaging does not require TSVs to be physically cross-sectioned, the same TSV can be imaged before and after annealing. Using 8 keV laboratory-based XCT, voids formed during copper electroplating are observed in as-deposited samples and void growth is observed at the void location after annealing. We hypothesize that the mechanism generating voids is hydrostatic stress-assisted void growth. Stresses …

Optimization And Development Of Silicon-Based Semiconductor Devices Using Tcad, Changwoo Lee

Legacy Theses & Dissertations (2009 - 2024)

Computer simulation of the electrical and optical properties of semiconductor devices has been became as an essential tool for developing new device as well as for improving existing device. This presentation describes applications of physical device simulation: (1) design optimization of power MOSFET, which is single crystalline based silicon semiconductor device, for cryogenic temperature application and (2) two-dimensional device simulation of amorphous silicon based solar cell to develop novel photovoltaic device with high efficiency.

Electron-Phonon Interactions And Quantum Confinement Effects On Optical Transitions In Nanoscale Silicon Films, Vimal Kumar Kamineni

Legacy Theses & Dissertations (2009 - 2024)

Theoretical studies have attributed the temperature dependence of the linear optical response (dielectric function) of bulk semiconductors to electron-phonon interactions and thermal expansion of the lattice. However, the role of phonons in the optical properties of nanoscale structures is often overlooked. This thesis systematically investigates the impact of both carrier confinement and electron-phonon interactions using nanoscale films of silicon in crystalline silicon quantum wells (c-Si QW). Spectroscopic ellipsometry (SE) is a linear optical technique used to of extract the dielectric function and thickness of very thin films. X-ray reflectivity (XRR) was used as the complementary thickness metrology method. The dielectric …

Investigation Of Novel Alumina Nanoabrasive And The Interactions With Basic Chemical Components In Copper Chemical Mechanical Planarization (Cmp) Slurries, Shravanthi Lakshmi Manikonda

Legacy Theses & Dissertations (2009 - 2024)

Chemical mechanical planarization (CMP) is an enabling process technology for IC fabrication to maintain global planarity across the wafer to satisfy lithographic depth of focus constraints. It also enables integration of materials that cannot be anisotropically etched, such as Cu. CMP utilizes nanoparticle abrasives in aqueous slurry to aid in planarization.

Graphene-Based Interconnects : Electrical Performance And Reliability, Tianhua Yu

Legacy Theses & Dissertations (2009 - 2024)

According to the ITRS Roadmap, on-chip interconnects wire width and current density will reach 22 nm and 5.8×106 A/cm2 in 2020, respectively. The electrical resistivity of Cu increases with scaled critical dimensions due to exacerbated carrier scattering at grain boundaries and interfaces, resulting in signal speed degradation. Electronmigration (EM)-related failure due to intensified current distribution posts extra limits to ultra-scaled systems. Innovative interconnect solutions are needed to tackle performance and scaling challenges.

Applications Of Raman Spectroscopy For Silicon Stress Characterization In Integrated Circuits, Colin Mcdonough

Legacy Theses & Dissertations (2009 - 2024)

The introduction of mechanical stress in Si-based integrated circuits (ICs), whether desired or undesired, is intrinsic to IC fabrication. The origins are diverse and result from the numerous materials, geometries, and processes involved in fabrication. These stresses can lead to such effects as delamination, void formation and migration, and fracture, and can significantly affect device performance. As a result, stress development is a major concern for reliability, process control, and device design. It is necessary to investigate and characterize the origins and levels of the induced stresses. A more complete fundamental understanding of the evolution of stress in ICs and …

Extreme Ultraviolet Photoresists : Film Quantum Yields And Ler Of Thin Film Resists, Craig D. Higgins

Legacy Theses & Dissertations (2009 - 2024)

Extreme ultraviolet (EUV) is the leading candidate for a commercially viable solution for next generation lithography. The development of EUV chemically amplified photoresists and processes are critical to the future lithographic requirements of the microelectronics industry. To meet the necessary requirements for both integrated circuit (IC) specifications and cost, the resolution, line-edge roughness (LER) and sensitivity all need to be reduced. Unfortunately, a fundamental trade-off has been observed between these three crucial elements. We have predicted that the best way to obtain the required resolution, line-edge roughness and sensitivity (RLS) is to create more acid molecules per photon absorbed. This …

Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi

Legacy Theses & Dissertations (2009 - 2024)

Characteristics of III-nitride based heterojunction devices are greatly influenced by the presence of high density of polarization induced interface charges. Research undertaken in the current doctoral thesis demonstrates the effect of presence of one, three and six sheets of polarization induced charges in three different III-nitride based devices, namely in a photocathode, a high electron mobility transistor (HEMT) and a hyperspectral detector structure. Through a systematic set of experiments and theoretical modeling an in-depth study of the interaction between multiple sheets of polarization induced charges and their impact on energy band profile was undertaken. Various device designs were studied and …

Development Of High Band Gap Absorber And Buffer Materials For Thin Film Solar Cell Applications, Daniel Dwyer

Legacy Theses & Dissertations (2009 - 2024)

CuInGaSe₂ (CIGS) device efficiencies are the highest of the thin film absorber materials (vs. CdTe, α-Si, CuInSe₂). However, the band gap of the highest efficiency CIGS cells deviates from the expected ideal value predicted by models. Widening the band gap to the theoretically ideal value is one way to increase cell efficiencies. Widening the band gap can be accomplished in two ways; by finding a solution to the Ga-related defects which limit the open circuit voltage at high Ga ratios, or by utilizing different elemental combinations to form an alternative high band gap photoactive Cu-chalcopyrite (which includes …

Fluorinated Acid Amplifiers For Extreme Ultraviolet Lithography, Seth Aaron Kruger

Legacy Theses & Dissertations (2009 - 2024)

Extreme ultraviolet lithography (EUV) is a promising candidate for next generation lithography. Although EUV has great potential there are still many challenges that must be solved before the technology can be implemented in the high volume manufacturing of semiconductor devices. The lithographic performance of EUV photoresists is one aspect that requires improvement. Particularly, EUV resists need simultaneous improvements in three properties: resolution, line-edge-roughness and sensitivity. The incorporation of acid amplifiers (AAs) in resists is one method to improve all three properties.

Negative Pressure Characteristics Of An Evaporating Meniscus At Nanoscale, Shalabh Maroo, J N. Chung

Mechanical and Aerospace Engineering - All Scholarship

This study aims at understanding the characteristics of negative liquid pressures at the nanoscale using molecular dynamics simulation. A nano-meniscus is formed by placing liquid argon on a platinum wall between two nanochannels filled with the same liquid. Evaporation is simulated in the meniscus by increasing the temperature of the platinum wall for two different cases. Non-evaporating films are obtained at the center of the meniscus. The liquid film in the non-evaporating and adjacent regions is found to be under high absolute negative pressures. Cavitation cannot occur in these regions as the capillary height is smaller than the critical cavitation …

Magneto-Dielectric Polymer Nanocomposite Engineered Substrate For Rf And Microwave Antennas, Cesar A. Morales

USF Tampa Graduate Theses and Dissertations

This dissertation presents the first reported systematic investigation on the implementation of multilayer patch antennas over Fe3O4-based polymer nanocomposite (PNC) magneto-dielectric substrates. The PNC substrate is created by the monodispersion of Fe3O4 nanopthesiss, with mean size of 7.5nm, in a polymeric matrix of Polydimethylsiloxane (PDMS).

Recently, magneto-dielectric substrates have been proposed by several researchers as a means for decreasing the size and increasing the bandwidth of planar antennas. Nevertheless, factors such as high loss and diminished control over magnetic and dielectric properties have hindered the optimal performance of antennas. In addition, the incompatibility and elevated complexity prevents integration of conventional …

Design, Synthesis And Test Of Reversible Circuits For Emerging Nanotechnologies, Himanshu Thapliyal

USF Tampa Graduate Theses and Dissertations

Reversible circuits are similar to conventional logic circuits except that they are built from reversible gates. In reversible gates, there is a unique, one-to-one mapping between the inputs and outputs, not the case with conventional logic. Also, reversible gates require constant ancilla inputs for reconfiguration of gate functions and garbage outputs that help in keeping reversibility. Reversible circuits hold promise in futuristic computing technologies like quantum computing, quantum dot cellular automata, DNA computing, optical computing, etc. Thus, it is important to minimize parameters such as ancilla and garbage bits, quantum cost and delay in the design of reversible circuits.

The …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Achieving High Efficiency Laminated Polymer Solar Cell With Interfacial Modified Metallic Electrode And Pressure Induced Crystallization, Yongbo Yuan, Yu Bi, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

We report efficient laminated organic photovoltaic device with efficiency approach the optimized device by regular method based on Poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM). The high efficiency is mainly attributed to the formation of a concrete polymer/metal interface mechanically and electrically by the use of electronic-glue, and using the highly conductive and flexible silver film as anode to reduce photovoltage loss and modifying its work function for efficiency hole extraction by ultraviolet/ozone treatment, and the pressure induced crystallization of PCBM.

In Vitro Models For Glaucoma Research: Effects Of Hydrostatic Pressure, Yuan Lei, Shadi Rajabi, Ryan M. Pedrigi, Darryl R. Overby, A. Thomas Read, C. Ross Ethier

Department of Mechanical and Materials Engineering: Faculty Publications

PURPOSE. The response of cells (e.g., optic nerve head [ONH] cells) to mechanical stress is important in glaucoma. Studies have reported the biological effects of hydrostatic pressure on ONH cells cultured on a rigid substrate. An apparatus, designed to independently vary hydrostatic pressure and gas tension (including oxygen tension) in culture medium, was used to evaluate the effects of pressure and tension on cell migration, shape, and α-tubulin architecture in a transformed cell line (DITNC1 rat cortical astrocytes).

METHODS. During the assay period, cells were exposed to one of four experimental configurations: (1) control pressure and control gas tension; (2) …

Impact Of Elliptical Trainer Ergonomic Modifications On Perceptions Of Safety, Comfort, Workout, And Usability For People With Physical Disabilities And Chronic Conditions, Judith M. Burnfield, Yu Shu, Thad W. Buster, Adam P. Taylor, Carl A. Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

Background The popularity of elliptical training has grown in rehabilitation, fitness, and home settings as a means for improving fitness and walking, yet many people with physical disabilities and chronic conditions experience difficulties when trying to use elliptical trainers.

Objective The purpose of this study was to compare, for people with disabilities and chronic conditions, perceptions of safety, comfort, workout, and usability of 4 elliptical trainers before and after the development of a set of low-cost adaptations.

Design This study was a quasi-experimental repeated-measures investigation.

Methods Twenty adults with diverse medical conditions and functional abilities evaluated 4 elliptical trainers for …

Use Of Environmental Scanning Electron Microscopy For In Situ Observation Of Interaction Of Cells With Micro- And Nanoprobes, Alexander Goponenko, B. J. Boyle, K. I. Jahan, Maxim V. Gerashchenko, Dmitri E. Fomenko, Vadim N. Gladyshev, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Precision intracellular sensing, probing and manipulation offer unprecedented opportunities for advances in biological sciences. Next-generation ultra-fine probes will be capable of targeting individual cell organelles. Development of such probes as well as probes capable of penetrating through tough cell walls requires detailed knowledge of cell-probe interaction. This Letter evaluated the applicability of environmental scanning electron microscopy (ESEM) for cell and cell-probe interaction imaging. Several types of cells (plant and yeast cells as well as mouse spermatozoa) were successfully imaged in their natural state, with mouse spermatozoa observed by ESEM for the first time. Computerized stage applied to image was tough …

Nanomechanical Analysis Of Insulinoma Cells After Glucose And Capsaicin Stimulation Using Atomic Force Microscopy, Ruiguo Yang, Ning Xi, King Wai-Chu Lai, Bei-Hua Zhong, Carmen Kar-Man Fung, Chen-Geng Qu, Donna H. Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Aim: Glucose stimulates insulin secretion from pancreatic islet β cells by altering ion channel activity and membrane potential in the β cells. TRPV1 channel is expressed in the β cells and capsaicin induces insulin secretion similarly to glucose. This study aims to investigate the biophysical properties of the β cells upon stimulation of membrane channels using an atomic force microscopic (AFM) nanoindentation system.

Methods: ATCC insulinoma cell line was used. Cell stiffness, a marker of reorganization of cell membrane and cytoskeleton due to ion channel activation, was measured in real time using an integrated AFM nanoindentation system. Cell height that …

Streaming Potential Generated By A Pressure-Driven Flow Over Superhydrophobic Stripes, Hui Zhao

Mechanical Engineering Faculty Research

The streaming potential generated by a pressure-driven flow over a weakly charged slip-stick surface [the zeta potential of the surface is smaller than the thermal potential (25 mV)] with an arbitrary double layer thickness is theoretically studied by solving the Debye–Huckel equation and Stokes equation. A series solution of the streaming potential is derived. Approximate expressions for the streaming potential in the limits of thin double layers and thick double layers are also given in excellent agreement with the full solution. To understand the impact of the slip, the streaming potential is compared against that over a homogeneously charged smooth …

Thermophysical Characterization Of Nanofluids Through Molecular Dynamic Simulations, John Shelton

USF Tampa Graduate Theses and Dissertations

Using equilibrium molecular dynamics simulations, an analysis of the key thermophysical properties critical to heat transfer processes is performed. Replication of thermal conductivity and shear viscosity observations found in experimental investigations were performed using a theoretical nanopthesis-fluid system and a novel colloid-fluid interaction potential to investigate the key nanofluid parameters. Analysis of both the heat current (thermal conductivity) and stress (shear viscosity) autocorrelation functions have suggested that the dominant physical mechanisms for thermal and momentum transport arises from enhancements to the longitudinal and transverse acoustic modes energy transfer brought about by the increased mass ratio of the nanopthesis to the …

The Synthesis And Host-Guest Applications Of Synthetic Receptor Molecules, Zachary Richard Osner

Dissertations

Host-guest chemistry involves the complimentary binding between two molecules. Host molecules have been synthesized to bind negative, positive, and neutral molecules such as proteins and enzymes, and have been used as optical sensors, electrochemical sensors, supramolecular catalysts, and in the pharmaceutical industry as anti-cancer agents.1 The field of nanoscience has exploited guest-host interactions to create optical sensors with colloidal gold and Dip-Pen nanolithography technologies. Gold nanoparticles, have been functionalized with DNA, and have been developed as a selective colorimetric detection system, that upon binding turns the solution from a red to blue in color.2

Cyclotriveratrylene (CTV) 1 is a common …

Fabrication And Characterization Of Electrospun Cactus Mucilage Nanofibers, Yanay Pais

USF Tampa Graduate Theses and Dissertations

This work seeks to fabricate, optimize, and characterize nanofibers of cactus Opuntia ficus-indica mucilage and Poly (vinyl alcohol) (PVA) by electrospinning. Mucilage is a neutral mixture of sugars produced by cactus and PVA is a non-toxic, water-soluble, synthetic polymer, which is widely used as a co-spinning agent for polymers. Mucilage was extracted from the cactus pad and prepared for electrospinning by mixing with acetic acid. Two types of PVA were used differentiating in high and low molecular weights. Concentrations of PVA were varied to find an adequate threshold for fiber formation. Changing the ratio of PVA to cactus mucilage produced …

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO₂ nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Sub-Cooled Pool Boiling Enhancement With Nanofluids, Elliott Charles Rice

USF Tampa Graduate Theses and Dissertations

Phase-change heat transfer is an important process used in many engineering thermal designs. Boiling is an important phase change phenomena as it is a common heat transfer process in many thermal systems. Phase change processes are critical to thermodynamic cycles as most closed loop systems have an evaporator, in which the phase change process occurs. There are many applications/processes in which engineers employ the advantages of boiling heat transfer, as they seek to improve heat transfer performance. Recent research efforts have experimentally shown that nanofluids can have significantly better heat transfer properties than those of the pure base fluids, such …