Nanoscience and Nanotechnology Commons^™

Applications Of Raman Spectroscopy Technique In Lithium Ion Batteries, Liang Zhao, Yong-Sheng Hu, Hong Li, Zhao-Xiang Wang, Hong-Xing Xu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

The Raman spectroscopy has been widely used in the study of lithium ion batteries.In this short review,we gave some examples of the applications of Raman spectroscopy in the study of electrode materials including carbonaceous materials,spinel LiM_xMn_2-x O₄,LiFePO₄,as well as polymer electrolytes,room temperaturemolten salt electrolytes and the solid-electrolyte interphase layers.The advantages and disadvantages of the ex-situ and in-situ Raman spectrum techniques are discussed.Using new Raman techniques to investigate Li-ion batteries are suggested.

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Artificial And Natural Nucleic Acid Self Assembling Systems, Marcus Wood

Wayne State University Dissertations

Nucleic acids are good candidates for nanomachine construction. They participate in all the processes of life, and so can function as structural building blocks and dynamic catalysts. However, to use nucleic acids as nanomachines, a better understanding of their material properties, how to design structures using them, and their dynamics is needed. We have tried to address these issues, in a small way, with nucleic acid force field development, an attempt at nanostructural design and synthesis using DNA, and a study of the RNA/protein regulatory dynamics of the tryptophan regulatory attenuation protein.

Crystallite Phase And Orientation Determinations Of (Mn, Ga) As/Gaas-Crystallites Using Analyzed (Precession) Electron Diffraction Patterns, Ines Häusler, Stavros Nicolopoulos, Edgar F. Rauch, K. Volz, Peter Moeck

Physics Faculty Publications and Presentations

Outline of the presentation:

1. Material system: (Mn,Ga)As/GaAs-crystallites

2. Structure analysis using Nano-beam Diffraction (NBD) Precession Electron Diffraction Technique (PED) --> Structure type I + II

3. Phase and orientation mapping using ASTAR

4. Conclusion

A Cell Electrofusion Microfluidic Device Integrated With 3d Thin-Film Microelectrode Arrays, Ning Hu, Jun Yang, Shizhi Qian, Sang W. Joo, Xiaolin Zheng

Mechanical & Aerospace Engineering Faculty Publications

A microfluidic device integrated with 3D thin film microelectrode arrays wrapped around serpentine-shaped microchannel walls has been designed, fabricated and tested for cell electrofusion. Each microelectrode array has 1015 discrete microelectrodes patterned on each side wall, and the adjacent microelectrodes are separated by coplanar dielectric channel wall. The device was tested to electrofuse K562 cells under a relatively low voltage. Under an AC electric field applied between the pair of the microelectrode arrays, cells are paired at the edge of each discrete microelectrode due to the induced positive dielectrophoresis. Subsequently, electric pulse signals are sequentially applied between the microelectrode arrays …

Investigation Of Titanium Nitride As Catalyst Support Material And Development Of Durable Electrocatalysts For Proton Exchange Membrane Fuel Cells, Bharat Avasarala

Legacy Theses & Dissertations (2009 - 2024)

The impending energy and climatic crisis makes it imperative for human society to seek non-fossil based alternative sources for our energy needs. Although many alternative energy technologies are currently being developed, fuel cell technology provides energy solutions, which satisfy a wide range of applications. But the current fuel cell technology is far from its target of large scale commercialization mainly because of its high cost and poor durability. Considerable work has been done in reducing the cost but its durability still needs significant improvement. Of the various materials in a PEM fuel cell, the degradation of electrocatalyst affects its durability …

Optimization And Development Of Silicon-Based Semiconductor Devices Using Tcad, Changwoo Lee

Legacy Theses & Dissertations (2009 - 2024)

Computer simulation of the electrical and optical properties of semiconductor devices has been became as an essential tool for developing new device as well as for improving existing device. This presentation describes applications of physical device simulation: (1) design optimization of power MOSFET, which is single crystalline based silicon semiconductor device, for cryogenic temperature application and (2) two-dimensional device simulation of amorphous silicon based solar cell to develop novel photovoltaic device with high efficiency.

Electron-Phonon Interactions And Quantum Confinement Effects On Optical Transitions In Nanoscale Silicon Films, Vimal Kumar Kamineni

Legacy Theses & Dissertations (2009 - 2024)

Theoretical studies have attributed the temperature dependence of the linear optical response (dielectric function) of bulk semiconductors to electron-phonon interactions and thermal expansion of the lattice. However, the role of phonons in the optical properties of nanoscale structures is often overlooked. This thesis systematically investigates the impact of both carrier confinement and electron-phonon interactions using nanoscale films of silicon in crystalline silicon quantum wells (c-Si QW). Spectroscopic ellipsometry (SE) is a linear optical technique used to of extract the dielectric function and thickness of very thin films. X-ray reflectivity (XRR) was used as the complementary thickness metrology method. The dielectric …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO₂ nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films, Hong Yun, Chang-Jian Lin, Jing Li, Rong-Gui Du

Journal of Electrochemistry

The nitrogen(N),sulfur(S) and chlorine(Cl) modified nano TiO₂ thin films were prepared by adding Ti(O-n-Bu)₄ as the precursor into concentrated HNO₃,H₂SO₄ and HCl Solutions,respectively,on different substrates in a sol-gel process.The photoelectrochemical performances of N,S and Cl modified nano TiO₂ thin films have been studied by UV-vis(DRS),photocurrent curves,EIS and OCP-time curves.N-modified TiO₂ nano films show better surface structure,which helps to improve the quantum efficiency of nano TiO₂ thin films.

Study Of The 11-Ferrocenylalkanethiol Redox-Induced Structure Changes By Flow-Injection Electrochemical Surface Plasmon Resonance, Xiu-Juan Xiao, Yong-Hui He, Juan Xiang, Bin Ren

Journal of Electrochemistry

Redox-induced orientation changes of self-assembled monolayers(SAMs) of 11-ferrocenylundecanethiol(FcC₁₁SH) were studied by the flow-injection electrochemical surface plasmon resonance(FI-EC-SPR).Results indicated that there existed two mechanisms concerning the redox-induced structure change of the self-assembled monolayer of ferrocenylalkanethiols:the electrostatic repulsion between the positively charged surface and the ferricenium cation and that among the cations led to a decrease in the tilt angle of the alkanethiol chain;upon Fc oxidation,the Fc group rotated from a tilted conformation to a position where the cyclpentyldiene plane became perpendicular to the electrode.

Synthesis Of Mild–Hard Aao Templates For Studying Magnetic Interactions Between Metal Nanowires, Jin-Hee Lim, Aurelian Rotaru, Seong-Gi Min, Leszek Malkinski, John B. Wiley

Physics Faculty Publications

The sequential application of mild and hard anodization techniques in the fabrication of porous aluminamembranes allows one to decrease the number of continuous pores in anodized aluminium oxide (AAO) templates. Initially, standard mild anodization techniques were used to create porous templates with 100 nm interpore distances and 70 nm pore diameters. Hard anodization treatment on the same membrane then produced interpore distances of about 265 nm with diameters of 110 nm. At the interface between the two anodization steps, many of the mild-side pores were terminated to create a mild–hard membrane (Mi–Ha AAO) where the functional interpore distances were 200–300 …

Negative Dielectrophoretic Capture Of Bacterial Spores In Food Matrices, Mehti Koklu, Seungkyung Park, Suresh D. Pillai, Ali Beskok

Mechanical & Aerospace Engineering Faculty Publications

A microfluidic device with planar square electrodes is developed for capturing particles from high conductivity media using negative dielectrophoresis (n-DEP). Specifically, Bacillus subtilis and Clostridium sporogenes spores, and polystyrene particles are tested in NaCl solution (0.05 and 0.225 S/m), apple juice (0.225 S/m), and milk (0.525 S/m). Depending on the conductivity of the medium, the Joule heating produces electrothermal flow (ETF), which continuously circulates and transports the particles to the DEP capture sites. Combination of the ETF and n-DEP results in different particle capture efficiencies as a function of the conductivity. Utilizing 20 μm height DEP chambers, “almost complete” and …

The Mechanism Of 13CoAd/12Co Isotope Exchange At Pt Electrode,A Combined Study By Electrochemical In-Situ Infrared Spectroscopy And Dipole-Dipole Coupling Analysis, Sang-Zi Liang, Shao-Xiong Liu, Ling-Wen Liao, Qian Tao, Jing Kang, Yan-Xia Chen

Journal of Electrochemistry

In this contribution,we have analyzed the IR spectra of saturated CO adlayer at rough Pt film electrode as a function of fractional surface coverage of ¹³CO_ad /¹²CO recorded during ¹³CO_ad /¹²CO isotope exchange process according to dipole-dipole coupling theory and coherent potential approximation. By properly choosing the parameters of adlayer structure and dipole-dipole coupling interaction under coherent potential approximation, we demonstrated that we can successfully simulate the IR spectra as a function of the surface coverage of CO adlayer at rough Pt film electrodes by assuming that CO_ad molecules with low …

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen

Journal of Electrochemistry

The methanol and ethylene glycol electrooxidation on palladium electrode in acidic solution has been investigated by cyclic voltammetry and in situ Fourier transform infrared spectroelectrochemistry. It shows that the oxidation of methanol and ethylene glycol at Pd electrode cannot proceed until over 1.5 V in acidic and neutral media. The overpotential decreases and the peak current density increases with the reduction in pH values. The formation of the oxygen-containing species significantly affects the alcohol oxidation on Pd electrode. The in situ FTIR spectroscopic measurements show that the oxidation products of ethylene glycol on Pd electrode are CO₂ and oxalic …

In-Situ Surface Enhanced Raman Scattering Electrochemical Investigation Of 4-Aminoantipyrine On Silver Electrode, Li-Jun Zhang, Wei Song, Ling Chen, Zong-Rang Zhang, Hai-Feng Yang

Journal of Electrochemistry

In this paper, 4-AAP was self-assembled on silver surface to form monolayers. Surface-enhanced Raman Spectroscopy (SERS) was used to in-situ investigate the adsorption mechanism of the 4-aminoantipyrine(4-AAP) on silver surface dependent on shifting potentials and the effect of solution pH. Based on density functional theory(DFT) calculation of vibration modes,approximate assignment of 4-AAP SERS spectrum was conducted. In situ SERS spectral electrochemical experiments indicated that the 4-AAP monolayers experience a dynamic adsorption process from a tilted fashion to a more vertical mode for benzene ring and more parallel for pyrine ring with the potential applied toward more negative voltages. The complete …

Phenomena Characterization Of Energy Materials By X-Ray Absorption Spectroscopy, Ming-Yao Cheng, Chun-Jen Pan, Ju-Hsiang Cheng, Bing-Joe Hwang

Journal of Electrochemistry

The aim of this review is to introduce the characterization of energy materials by X-ray absorption spectroscopy (XAS) . This technique allows us to probe changes in the valance state and the local environment of the targeted element in the active material; thereby,leading to a better understanding of its electrochemical behavior,and hopefully showing the way to improved performance. Here,electrocatalysts for fuel cells and active electrode materials for Li-ion batteries are taken as the examples that illustrate the capability of XAS and allow observation and theory to be correlated with electrochemical phenomena.

Comparative Study Of Nanoporous Pt, Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Aicheng Chen

Journal of Electrochemistry

In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …

Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical interface is a very important interface closely related to various energy and life processes. Surface-enhanced Raman scattering was widely used in electrochemistry soon after its discovery to understand the surface bonding,configuration,and orientation of the surface species. In recent 10 years,the fast development of nanoscience and nanotechnology has offered SERS with abundant substrates and characterization methods,which has allowed impressive development of electrochemical SERS. This articles will follow the time line to make systematically overview of SERS on Au and Ag,thin-layer transition-metal SERS,pure transition metal SERS,core-shell SERS and those methods for studying single crystal surfaces,including gap-mode SERS, TERS and SHINERS. Emphasis …

Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

The surface adsorption of benzoimidazole (BIMH) and 2-mercaptobenzimidazole(MBI) was investigated by electrochemical in-situ surface enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis on Cu electrode. The influence of the neutral ligand of triphenylphosphine (pph₃) on the adsorption and surface coordination of BIMH and MBI were investigated respectively. BIMH interacted with metal surface by the neutral molecule to form chemical adlayer in the extremely negative potential,while it adsorbed onto metal surface through the N atoms to form a polymer film which may suppress the corrosion of the metal. The introduction of pph₃ destroyed the film formation of BIMH …

The Sers Effect Of AuCore@PtShelL Nanoparticles With Different Pt Shell Thicknesses, Yan Zhong, Liang-Liang Yan, Gui-Shi Rao, Xiao-Cong Deng, Fei-Peng Wen, Jin-Long Xu, Qi-Ling Zhong

Journal of Electrochemistry

By using Au nanoparticles with a diameter of 55 nm as the core and ascorbic acid as the reductant, Au_core@ Pt_shell nanoparticles of controllable Pt shell thickness (0.3 ～ 6 nm) were synthesized by controlling the concentration of [PtCl₆]^2- ions. The ultraviolet-visible absorption spectrometry,scanning electron microscope (SEM), transmission electron microscope (TEM) ,high resolution transmission electron microscope (HRTEM) , and electrochemical cyclic voltammetry were employed to determine surface morphology and structure of  Au_core@Pt_shell. With SCN^- ion as a probe,the effect of the thickness of the Pt shell on the SERS …

In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong

Journal of Electrochemistry

The paper reports the first in situ surface enhanced Raman scattering (SERS) spectroelectrochemistry study of sulfur adsorption and electro-oxidation on highly roughened polycrystalline Pt surface in both acidic and basic supporting electrolytes. The SERS spectra were taken at a constant electrode potential after accumulative electro-oxidation CVs of the Pt electrode with pre-adsorbed sulfur species and at different electrode potentials that were varied stepwise of the Pt electrode immersed in sulfur-containing electrolytes without pre-adsorbed sulfur species. In both cases,a dominant vibrational band at 299 cm^-1 in acidic electrolyte but at 310 cm^-1 in basic electrolyte was observed,which was assigned …

Preliminary Investigation Of Iron Protoporphyrin Sams On Platinum Electrodes By Surface Enhanced Vibrational Spectroscopies, Min Ma, Yao-Yue Yang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

In situ SERS and ATR-SEIRAS were applied to investigate the electrochemical and structural properties of iron protoporphyrin IX (FePP) self-assembled monolayers (SAMs) on Pt electrodes in 0. 1 mol· L -1 HClO₄. The potential dependent SERS spectra of the FePP SAM on a roughened Pt electrode with the enhancement factor of ca. 40 were acquired with the excitation line of 514 nm. Analyses of SERS data over the potential region from 0. 5 to -0. 3 V enabled to obtain potential dependent adsorption isotherms,from which the formal redox potential could be estimated to be ca. -0. 2 V. …

Density Functional Theory Studies Of Surface-Enhanced Raman Spectroscopy In Electrochemical Interfaces, Liu-Bin Zhao, De-Yin Wu, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Quantum chemical density functional theory and Raman scattering theory were used to study the bonding mechanism and surface-enhanced Raman spectroscopy of pyridine adsorbed on transition metals (Ⅷ group) and coinage metals (IB group) . SERS studies of pyridine-metal systems have been reviewed. Chemical bonding mechanism as well as photo-driven charge transfer mechanism was considered to investigate the vibrational frequency shift and the enhancement of SERS intensity in electrochemical interfaces. Our theoretical results can be used to interpret the SERS phenomena dependent on metals,excitation wavelengths,and applied potentials.

Studies Of Oxidation Processes Of Adsorbed And Solution Co On Pt(110) Electrode By Cyclic Voltammetry And In Situ Ftirs, Li Tian, Jun-Tao Li, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The oxidation processes of adsorbed CO (COad) and solution phase CO (COsol) on Pt(110) electrode were investigated by cyclic voltammetry and in-situ FTIR spectroscopy. It has revealed that in comparison with COad on Pt(110) in a CO-free solution,the oxidation current peak of COsol in a CO-saturated solution is positively shifted ca. 168 mV,and the peak current density has been increased by 6. 70 times. Linear adsorbed CO (COL) is determined by in-situ FTIR spectroscopy as the main species,which is uniformly distributed on Pt (110) surface. In a CO-free solution,the onset potential of COL is measured by in-situ FTIRS ca. 0. …

Boron Carbide Based Solid State Neutron Detectors: The Effects Of Bias And Time Constant On Detection Efficiency, Nina Hong, John Mullins, Keith Foreman, Shireen Adenwalla

Shireen Adenwalla Papers

Neutron detection in thick boron carbide(BC)/n-type Si heterojunction diodes shows a threefold increase in efficiency with applied bias and longer time constants. The improved efficiencies resulting from long time constants have been conclusively linked to the much longer charge collection times in the BC layer. Neutron detection signals from both the p-type BC layer and the n-type Si side of the heterojunction diode are observed, with comparable efficiencies. Collectively, these provide strong evidence that the semiconducting BC layer plays an active role in neutron detection, both in neutron capture and in charge generation and collection.