Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 961 - 990 of 1029

Full-Text Articles in Nanoscience and Nanotechnology

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai Feb 2002

Photocurrent Enhancement By Ticl4 Post-Treatment For Tio2 Nanoporous Film Electrode, Yan-Jie Ren, Li Zhang, Sheng-Min Cai

Journal of Electrochemistry

Enhanced photocurrent in dye-sensitized photoelectrochemical cell was obtained by post-treating the TiO2 nanoporous film electrode with TiCl4. By investigating the effect of the post-treatment on surface area, pore size distribution, laser pulse induced current transient of the film electrode, photocurrent increase by the post-treatment was assigned to the improved electron percolation resulting from broadening of interparticle neck.

Go to article

Prediction Of Soakout Time Using Analytical Models, B. Chakravarthy, H. P. Cherukuri, R. G. Wilhelm Jan 2002

Prediction Of Soakout Time Using Analytical Models, B. Chakravarthy, H. P. Cherukuri, R. G. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

In precision manufacturing enterprises, machine parts at nonstandard temperatures are often soaked to standard temperature prior to making any dimensional measurements. The soakout times are usually determined using lumped heat-transfer models where the part temperatures are assumed to be uniform. This article discusses conditions under which lumped model assumptions are valid by comparing lumped analyses for various shapes and materials with the more general finite element results. In addition, the effect of ambient temperature cycling on part response is also studied.

Go to article

Hybrid Transient-Parametric Method And System To Distinguish And Analyze Sources Of Acoustic Emission For Nondestructive Inspection And Structural, Health Monitoring, Yuris Dzenis Dec 2001

Hybrid Transient-Parametric Method And System To Distinguish And Analyze Sources Of Acoustic Emission For Nondestructive Inspection And Structural, Health Monitoring, Yuris Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

A nondestructive evaluation (NDE) technique for inspecting or health monitoring of Structures and/or Specimens by analyzing acoustic emission (AE) signals emitted by the Structures and/or specimens. The method and System ana lyzes acoustic emission (AE) signals emitted by structures and/or Specimens. AE Signals emitted by the Structures and/or Specimens are parametrically filtered as a function of parametric filters corresponding to characteristic waveforms of transient AE classes of predefined AE signals. In para metric analysis, the filtering may be pre- or post-recording. In transient AE analysis, the filtering may be prior to transient recording of the transient signals.

Go to article

Crash Attenuation System, John D. Reid, John R. Rohde, Dean L. Sicking Oct 2001

Crash Attenuation System, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A crash attenuation system having an impact head, and energy absorption mechanism. The energy absorbing mechanism has a mandrel for rupturing thin-walled tubes in a controlled rupture to absorb impact forces from a colliding vehicle. A frame may be used to mount the system to a truck, trailer, guardrail, median barrier end treatment, or a crash cushion. Stress concentrators may be incorporated into the tubes and the mandrels to selectively control rupturing and energy dissipation.

Go to article

In Situ Ftir Reflection Spectroscopy Of Bioelectrode, Sa-Ying Dong, Guang-Yu Zhao, Yuzhu Gao, Guang-Zhang Chen, Ming-Xiang Lv Aug 2001

In Situ Ftir Reflection Spectroscopy Of Bioelectrode, Sa-Ying Dong, Guang-Yu Zhao, Yuzhu Gao, Guang-Zhang Chen, Ming-Xiang Lv

Journal of Electrochemistry

In situ FTIR reflection spectroscopy was used to study mediated enzyme electrode and immunoelectrode. We determined and analyzed IR characteristic spectra of GOD and glucose by the use of potential difference spectra and single beam subtractive spectra. At last, we explored the IR absorption characters of enzyme-immunoelectrode.

Go to article

Determination Of Hydrogen Diffusion Coefficient In Metal Hydride Electrode With Electrochemical Impedance Spectroscopy, Xian-Xia Yuan, Nai-Xin Xu Aug 2001

Determination Of Hydrogen Diffusion Coefficient In Metal Hydride Electrode With Electrochemical Impedance Spectroscopy, Xian-Xia Yuan, Nai-Xin Xu

Journal of Electrochemistry

Electrochemical impedance spectroscopy was employed to determine the hydrogen diffusion coefficient in MlNi 3.75Co 0.65 Mn0.4Al0.2 metal hydride electrode with various states of charge (SOC) at room temperature and with 50% SOC at various temperatures. It was found that hydrogen diffusion coefficient in this electrode decreases with the increase in SOC at ambient temperature, and for the electrode with 50% SOC, hydrogen diffusion coefficient increases with the increase of temperature and the activation energy for hydrogen diffusion in it is 35 kJ/mol.

Go to article

Delamination Resistant Composites Prepared By Small Diameter Fiber Reinforcement At Ply Interfaces, Youris A. Dzenis, Darrell H. Reneker Jul 2001

Delamination Resistant Composites Prepared By Small Diameter Fiber Reinforcement At Ply Interfaces, Youris A. Dzenis, Darrell H. Reneker

Department of Mechanical and Materials Engineering: Faculty Publications

A fiber reinforced composite material comprising a resin matrix and primary reinforcement fibers and further comprising secondary, smaller diameter, reinforcement fibers at one or more ply interfaces, or portion thereof, provides improved interlaminar toughness, strength, and delamination resistance and without substantial increase in weight. In one embodiment, the small fibers are attached to one side of a conventional prepreg prior to lamination. The small fibers are flexible and are expected to conform to the shape and distribution of the primary reinforcing fibers at the interface.

Go to article

Energy Absorbing Breakaway Steel Guardrail Post, John R. Rohde, John D. Reid, Dean L. Sicking Jul 2001

Energy Absorbing Breakaway Steel Guardrail Post, John R. Rohde, John D. Reid, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

An improved breakaway steel guardrail post for use in dissipation of impact energy upon impact of the post having an upper post member and a lower post member, a connecting joint, and a mechanism connected to the upper and lower post members for controlling the energy dissipation of the guardrail post about the connecting joint at a predetermined rate. A first embodiment utilizes a cable restraint lopped through openings in he guardrail posts. Other embodiments included straps and fasteners disigned to distort or fail at predetermined rates or strengths and combinations thereof.

Go to article

Controlled Buckling Breakaway Cable Terminal, John D. Reid, John R. Rohde, Dean L. Sicking Jun 2001

Controlled Buckling Breakaway Cable Terminal, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A crash attenuation apparatus for use with a guardrail system having rail posts and rail elements. An impact head has a buffer nose section and a rail post breaking beam system. The post breaking beam system has upper and lower breaking beams attached to the head. A guide tube is attached to the side of the head. A strut member extends from a first attachment point on the rail element to a second point downstream. Upon impact by a vehicle, the head breaks the first rail post, before impacting the strut and buckling the rail element downstream.

Go to article

Preparation Of Ti-Based Nanocrystalline Tio2 Film Electrode With High Activity, Dao-Bao Chu, Guang-Xia Shen, Xing-Fu Zhou, Chang-Jian Lin, Hua-Shui Lin May 2001

Preparation Of Ti-Based Nanocrystalline Tio2 Film Electrode With High Activity, Dao-Bao Chu, Guang-Xia Shen, Xing-Fu Zhou, Chang-Jian Lin, Hua-Shui Lin

Journal of Electrochemistry

The potentiostatic electrosynthesis of Ti(EtO)4 was studied by anodic dissolution of metal titanium(TA1) in solution of 0.005 mol·L-1 (EtO)4NBr in the ethanol (AR) in the presence negligible CH3COCH2COCH3. The Ti-based nanocrystalline TiO2 Film electrode (Ti/nano-TiO2) was prepared by sol-gel method. By TEM, SEM and XRD, it has been shown that the anatase particle of TiO2 was 10～35 nm in diameter and the film was 0.5 μm in thickness. The nanocrystalline film was composed of a three-diminsional network of interconnected particles. Reodx behavior and electrocatalytic activities of …

Go to article

The Applications Of Confocal Raman Micro-Spectroscopy For Study Of Practical Electrode Materials, Yong Yang, Wei Chu, Jun-Min Nan, Xun-Guang Chen, Zu-Geng Lin Feb 2001

The Applications Of Confocal Raman Micro-Spectroscopy For Study Of Practical Electrode Materials, Yong Yang, Wei Chu, Jun-Min Nan, Xun-Guang Chen, Zu-Geng Lin

Journal of Electrochemistry

Some recent research work about applications of confocal Raman micro spectroscopy for study of practical electrode materials carried out in our lab has been briefly introduced. The examples include study of electrochemical Li+ intercalation process, characterization of surface oxide film on AB5 type electrodes and passive film and pitting corrosion of Rebar electrodes.

Go to article

Two-Dimensional Surface Raman Imaging Of A Roughened Iron Electrode In Saline Water, Pei-Gen Cao, Jian-Lin Yao, Jun-Wei Zheng, Bin Ren, Ren-Ao Gu, Zhong-Qun Tian Feb 2001

Two-Dimensional Surface Raman Imaging Of A Roughened Iron Electrode In Saline Water, Pei-Gen Cao, Jian-Lin Yao, Jun-Wei Zheng, Bin Ren, Ren-Ao Gu, Zhong-Qun Tian

Journal of Electrochemistry

The analysis of the composite and distribution of iron oxide due to pit corrosion in saline solutions (3.4% NaCl) is of great importance. Many electrochemical methods, XPS, and other photoelectronic techniques have been applied to this domain. Surface enhanced Raman scattering (SERS) spectroscopy can provide the vibrational information of surface species with high sensitivity and is very useful in the study of surface chemistry of iron. Notwithstanding, the application of SERS in iron corrosion is hampered for its SERS-inactivity. Efforts have been devoted to extend the use of SERS to the study of iron.

Go to article

In Situ Raman Spectroelectrochemical Characterization Of The Prussian Blue/Platinum Modified Electrode, Xiao-Wei Cao, Rong Wang, Gui-Hua Wang, Zong-Rang Zhang Feb 2001

In Situ Raman Spectroelectrochemical Characterization Of The Prussian Blue/Platinum Modified Electrode, Xiao-Wei Cao, Rong Wang, Gui-Hua Wang, Zong-Rang Zhang

Journal of Electrochemistry

Prussian Blue is known to be deposited electrochemically on the electrode surface, producing a dense redox active layer. Since the Prussian Blue modified electrode was first reported by Neff in 1978, different in situ spectroelectrochemical techniques have been widely used to investigate its electrochemical mechanism. But no research work related to the in situ Raman spectroscopic studies on it has been reported. In this paper we try to characterize the nature of thin Prussian Blue films on platinum substrates with in situ Raman spectroelectrochemical technique.

Go to article

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo-Liang Chen, Sheng-Pei Chen, Zhi-You Zhou, Chun-Hua Zhen, Shi-Gang Sun Feb 2001

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo-Liang Chen, Sheng-Pei Chen, Zhi-You Zhou, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The adsorption and oxidation of ethanol on nm Pt/GC electrode in acid solutions containing 0.1 mol·L -1 H2SO4 +0.1 mol·L -1 CH3CH2OH was investigated by using cyclic voltammetry, EQCM and in situ FTIR spectroscopy. The experimental results demonstrated that the oxidation of CH3CH2OH is closely relaed to solution acidity and oxygen species on electrode surface; CH3CH2OH was oxidized on nm Pt/GC electrode in acidic media via a dual path reaction mechanism, i.e . CH3CH2OH may be oxidized into CO2 through …

Go to article

Task Specific Uncertainty In Coordinate Measurement, R. G. Wilhelm, R. Hocken, H. Schwenke Jan 2001

Task Specific Uncertainty In Coordinate Measurement, R. G. Wilhelm, R. Hocken, H. Schwenke

Department of Mechanical and Materials Engineering: Faculty Publications

Task specific uncertainty is the measurement uncertainty associated with the measurement of a specific feature using a specific measurement plan. This paper surveys techniques developed to model and estimate task specific uncertainty for coordinate measuring systems, primarily coordinate measuring machines using contacting probes. Sources of uncertainty are also reviewed.

Go to article

Electrochemical Hydrogen Storage Properties Of Carbon Nanotubes, Xue Qin, Xue-Ping Gao, Feng Wu, Hong Liu, Ying Lan, Hua-Tang Yuan, De-Ying Song, Pan-Wen Shen Nov 2000

Electrochemical Hydrogen Storage Properties Of Carbon Nanotubes, Xue Qin, Xue-Ping Gao, Feng Wu, Hong Liu, Ying Lan, Hua-Tang Yuan, De-Ying Song, Pan-Wen Shen

Journal of Electrochemistry

The electrochemical properties of carbon nanotubes (CNTs) electrode have been investigated in this paper. The high discharge capacity of 200 mAh·g-1 was measured for the CNTs Ni electrode at a discharge density of 200 mAh·g-1 . CNTs-Ni electrode, the high electrochemical activity and the long cycle life were observed. The electrochemical mechanism of hydrogen adsorption and oxidation at the CNTs Ni electrode was studied by cyclic voltammertry method.

Go to article

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang Nov 2000

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang

Journal of Electrochemistry

An optical wave guide sensing method was proposed for monitoring corrosion of metal in outdoors steel structures. Replacing the cladding of wave-guide with metal film in a particular location, the method takes the metal film as the corrosion sensitive film. The experiment of waveguide sensor was carried out on a 721 colorimetric vessel, with which the soution is held in itself and the light is propagated in its sidewall. A Fe-C alloy film was electroplated onto the inner sied of vessel to form the corrosion sensitive film. The structure of the Fe-C alloy film was studied by XRD, EDX and …

Go to article

A Study Of The Adsorption Behaviors On The Surface Of Gold Electrode By In-Situ Electrochemical Raman Spectroscopy, Xia-Qin Wu, Xiao-Wei Cao, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang Nov 2000

A Study Of The Adsorption Behaviors On The Surface Of Gold Electrode By In-Situ Electrochemical Raman Spectroscopy, Xia-Qin Wu, Xiao-Wei Cao, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang

Journal of Electrochemistry

The results of in-situ measurements with Raman spectroelectrochemical thchnique on bare gold electrode and adenine modified gold electrode were reported. The adsorption behaviors of adenine and superoxide dismutase (SOD) and their interactions with gold electrode were analyed. The mechanism of promoted electron transfer process of SOD in the presence of adenine at gold electrode surface is discussed.

Go to article

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou Nov 2000

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou

Journal of Electrochemistry

The electro-oxidation of ethanol on nm-Pt/GC electrode in alkaline solutions containing 0.02 mol·L-1 NaOH+0.1 mol·L-1 CH3CH2OH was investigated by using cyclic voltammetry and in-situ FTIR spectroscopy. The experimental results demonstrated that the main product of ethanol oxidation is CH3COO-, only very small amount of CH 3CHO has been determined simultaneously. In contrast with the dual path reaction mechanism for the oxidation of ethanol in acid media, the oxidation of ethanol in alkaline media didn't pass through the dissociative adsorption, and no adsorbed species could be determined even using a …

Go to article

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin Nov 2000

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

In this letter, various nano structured materials such as spinel LiMn2O4 nanotubes/nanowires and carbon nanotubes have been prepared by using porous alumina template. The prepared template and materials have been characterized by AFM and TEM techniques. It is shown that size of the nanotubes can be conveniently controlled by using template method. Some preliminary results of cyclic voltammetry about nano structured LiMn2O4 are also reported.

Go to article

The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo Aug 2000

The Lineal Polarization Method For Corrosion Rate Measurement Of Reinforcing Bar Of Concrete In Situ, Ai-Ling Du, Wen-Tao Hou, He-Ming Zhang, Jian-Qun Luo

Journal of Electrochemistry

A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ. Generally in the experiment, the area and shape of the reinforcing bar as a working electrode can be changed and adjusted according to our needs. But polarization area cannot be defined when reinforcing bar is polarized in situ, so that a real Rp can't be obtained. Thus the purpose of present work is to improve the measurement system. We used the double-ring auxiliary electrodes made by ourselves. The size of the double-ring auxiliary electrodes was adjusted repeatedly until the real polarization area …

Go to article

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen May 2000

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

Our recent works about nanosized materials for lithium ion batteries are reported, including the synthesis of nanosized Sb, SnSb, CuSnx, Si and CuS, their electrochemical performance as anode or cathode active materials, the variation of crystal structure and morphology during discharge and charge cycling. In addition, the self-plasticization of lithium salt with nanosized anion ion in polymer electrolyte, the influence of the electrochemical Li-doping on the Raman spectra and photoluminescence of nano-Si are also introduced. Furthermore, the relationship between intrinsic properties of nanosized materials and their electrochemical behaviors are discussed. The prospect of nanosized materials for lithium ion …

Go to article

The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu May 2000

The Influence Of Surface Diffusion Of Adsorbed Intermediate On Hydrogen Evolution Reaction At Pt/Nafion Composite Electrodes, Wei-Yi Tu, Lei Su, Wen-Jun Liu, Bing-Liang Wu

Journal of Electrochemistry

The decrease of over-potential of hydrogen evolution reaction at Pt black powder/Nafion microelectrode, comparing that of the Pt microdisk/Nafion electrode, was evident from the polarization curves of the Pt microdisk/Nafion electrode, platinized Pt micrdisk/Nafion electrode and Pt black powder/Nafion microelectrode. It is also evidenced by a plane Pt electrode with an additional free Pt surface. The surface diffusion and the surface recombination reaction of the adsorbed intermediate at the free surface of the Pt particles were supposed. It is an additional reaction path that induced the decrease of the concentration of the adsorbed intermediate. Thereby, the over-potential decreased.

Go to article

An Investigation On The Corrosion Potential Imaging At The Interface Of Concrete/Reinforcing Bar In Corrosion Media, Rong-Zong Hu, Chang-Jian Lin, Xiang Zhou, Jian-Guang Tan, Xiong-Chao Zhao May 2000

An Investigation On The Corrosion Potential Imaging At The Interface Of Concrete/Reinforcing Bar In Corrosion Media, Rong-Zong Hu, Chang-Jian Lin, Xiang Zhou, Jian-Guang Tan, Xiong-Chao Zhao

Journal of Electrochemistry

The iron array electrode covered with concrete as a new electrochemical technique is applied to map the potential imaging and to investigate on the iron electrode corrosion process under concrete: In Cl- solution the corrosion of the iron array electrode covered with concrete had been prevented for a short term since the concrete protection, but the corrosion still occurreed and developed after immersed for a long time. In SO42- solution although the sample had being immersed for a long time and the concrete was possibly broken, the corrosion did not develop. In Cl- solution the corrosion …

Go to article

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang May 2000

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang

Journal of Electrochemistry

The porous alumina membrane formed in the anodic oxidation of highly pure aluminum foil has attracted a great deal of attention in recent years. It can be served as a desired template to prepare nanometer scale materials due to its unique structure of discrete and cylindrical nanopores, paralleled one another, with the homogeneous size and distribution. Chalcogenide semiconductors have promising prospect in the applications of photovoltaic and photoconducting devices and have been extensively exploited for many years. Olbright and his co-workers studied experimentally and theoretically the optical nonlinearties of CdSxSe1-x-doped glass; Britt and Ferekides reported that …

Go to article

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao Feb 2000

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao

Journal of Electrochemistry

The adsorption of CO on electrodes of nanometer thin films of transition metals (Pt, Pd, Rh, Ru) and alloys (PtPd, PtRu) prepared under cyclic voltammetric conditions has been studied by in situ FTIR spectroscopy. The abnormal infrared effects (AIREs) have been explored as a novel and general phenomenon. The AIREs consist mainly in the inversion of the direction of IR band and the significant enhancement of IR absorption by adsorbed CO species. It was revealed that the enhanced IR absoroption of adsorbed species in AIREs depends strongly on the nature of metal or alloy, and on the structure and the …

Go to article

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai Nov 1999

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai

Journal of Electrochemistry

The photoelectrochemical behaviors of the TiO2 nanostructured porous film sensitized by cyanine dye were investigated in this paper. The results showed that the excitaed state level matched the conduction band edge of TiO2 nanoparticle. Therefore the sensitization of the dye can increase the photocurrent intensity of the TiO2 nanostructured electrode obviously and results in a red-shift of optical absorption from the ultra-violet region to the visible. As a result, the light-to-electricity conversion efficiency was improved evidently, the maximum value of IPCE has reached 12.1%.

Go to article

Breakaway Steel Guardrail Post, Dean L. Sicking, John D. Reid, John R. Rohde Nov 1999

Breakaway Steel Guardrail Post, Dean L. Sicking, John D. Reid, John R. Rohde

Department of Mechanical and Materials Engineering: Faculty Publications

A breakaway guardrail post includes upper and lower post sections spaced apart but connected by a breakaway joint. The joint is attached at one end to the upper post by a first fastener set and connected at a second end by a second fasteners set. Upon impact forces being applied to the upper post section, the first fastener fails and the upper post section rotates downwardly.

Go to article

Foundation Sleeve For A Guardrail System, Dean L. Sicking, John D. Reid, John R. Rohde Jul 1999

Foundation Sleeve For A Guardrail System, Dean L. Sicking, John D. Reid, John R. Rohde

Department of Mechanical and Materials Engineering: Faculty Publications

A highway guardrail terminal system having horizontally extending guardrail elements mounted on a plurality of posts. Foundation sleeves having an elongated slit along one side retain and support appropriate guardrail posts. A plurality of stiffing ribs extend across the slit at a distal portion of the tube. The sleeves enable a safer and faster removal of broken guardrail posts after vehicular impact.

Go to article

Adaptive Sampling For Coordinate Metrology, Robert Edgeworth, Robert G. Wilhelm Jul 1999

Adaptive Sampling For Coordinate Metrology, Robert Edgeworth, Robert G. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

An iterative sampling process for dimensional measurement is presented. The strategy is based upon the use of surface normal measurement data to develop an interpolating curve between sample points. The interpolant is used to select subsequent measurement targets iteratively. The process is repeated until the measurement converges to a complete and accurate evaluation of the surface. The required sample size is proportional to part quality. The most accurate parts will require the least sample points; whereas, lower quality parts will require a greater number of total samples. The method is particularly applicable to measurement of complex surfaces with coordinate measuring …

Go to article

First Prev Next Last