Nanoscience and Nanotechnology Commons^™

Process For The Formation Of Wear- And Scuff-Resistant Carbon Coatings, Gerard W. Malaczynski, Xiaohong Qiu, Joseph V. Mantese, Alaa A. Elmoursi, Aboud H. Hamdi, Blake P. Wood, Kevin C. Walter, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

A process for forming an adherent diamond-like carbon coating on a workpiece of suitable material such as an aluminum alloy is disclosed. The workpiece is successively immersed in different plasma atmospheres and subjected to short duration, high voltage, negative electrical potential pulses or constant negative electrical potentials or the like so as to clean the surface of oxygen atoms, implant carbon atoms into the surface of the alloy to form carbide com pounds while codepositing a carbonaceous layer on the surface, bombard and remove the carbonaceous layer, and to thereafter deposit a generally amorphous hydrogen-containing carbon layer on the surface …

Study On The Surface States Of Zinc Sulfide Thin Film Doped With Erbium And Their Effect On The Relaxation Luminance, Yujiang Wang, Zhaohong Liu, Zhenxiang Chen

Journal of Electrochemistry

X-ray photoelectron spectrum and characteristics of the capacity, versus thevoltage of the thin film devices are measured to study the surface states of the zinc sulfide thin film.The transient electroluminescence excited by pulses shows the relaxation luminance peaks during anon-exponential decay process of the characteristic transitions activated by Er³⁺ in the ZnS directcurrent thin film electroluminescence (DCTFEL) devices.The surface structures of ZnS:Cu, Cl, Erfilm with the absorption of oxygen, and the effect of the surface states on the relaxation luminance ofthe devices are discussed.

Method Of Making Quasicrystal Alloy Powder, Protectivecoatings And Articles, Jeffrey E. Shield, Alan I. Goldman, Iver E. Anderson, Timothy W. Ellis, R. William Mccallum, Daniel J. Sordelet

Department of Mechanical and Materials Engineering: Faculty Publications

A method of making quasicrystalline alloy particulates wherein an alloy is superheated and the meltis atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture.

Transient Photocurrent Behavior Of Multiple Quantum Well Gaas/AlXGa(1-X)As Electrode, Liu Yao, Xurui Xiao, Yuan Lin, Yiping Zeng, Dianzhao Sun, Haiqun Zheng

Journal of Electrochemistry

Transient photocurrents induced by short light pulses at lattice-matched multiplequantum well (MQW)GaAs/Al_0.3)Ga_0.7 As electrodes were studied in the 1 ×10^-2 mol·dm^-3 ferrocene([Fc⁰]/[Fc⁺]=9/1)-0.1 mol·dm^-3 tetrabutylammonium tetrafluoroborate acetonitrile solutionin order to examine the relaxation photoprocesses and to evaluate kinetic parameters of superlattice electrodes.

GaAs/Al_0.3Ca_0.7 As MQW electrode consisting of 10 periods with each of GaAs well (5.3 nm) and Al_0.3Ga_0.7. As barrier (10 nm) showed two pronounced and well-resolved peak structures located at 1.503 eV and 1.699 eV in the photocurrent spectrum, corresponding to the …

Self Assembly Via Layer By Layer Surface Reaction On Gold Electrodes And The Electrochcmical Characterization, Xiandui Dong, Juntao Lu, Chuanxin Cha

Journal of Electrochemistry

The self-assembled monolayers,which were built by spontaneous adsorption of ω-carboxylic acid thiols on gold surface,were used as substrate for further modification through later bylayer amide surface reactions. At each stage of modification,the gold surface was characterizedelectochemieally. The results demonstrated that the strategies of layer by layer self assembly is ofsignificant potential for fabrieating functionalized ultrathin layers.

The Electrode Process Of Y(Ⅲ) On Copper Electrode And Its Surface Metallizing, Chungen Zhou, Shuzhen Duan

Journal of Electrochemistry

The reduction of yttrium ion on copper electrode in NaCl-KCl-YCl₃ molten saltshas been investigated. The results indicate that the formation of intermetallic compounds is occuredbefore the metallic yttrium to be formed. The formation of intermetallic compounds is controlled bythe process of which yttrium atoms are diffusing into copper electrode. The kinetic characters todiffusion of yttrium atoms were also discussed.

Automating Tolerance Synthesis: A Framework And Tools, Stephen C.-Y. Lu, Robert G. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

This paper describes CASCADE-T—a new approach to tolerance synthesis that uses a complete representation of the conditional tolerance relations that exist between features of a part under design. Conditional tolerances are automatically determined from functional requirements and shape information. Tolerance primitives based on the virtual boundary requirements approach to tolerance representation are composed to form more complex tolerance relationships. Artificial intelligence techniques, including a constraint network, frame-based system, and dependency tracking are used to support flexible and detailed computation for tolerance analysis and synthesis.

Nondestructive Detection Of An Undeserable Metallic Phase, T1, During Processing Of Alumnum-L Thumalloys, Otto Buck, David J. Bracci, David C. Jiles, Lisa J.H. Brasche, Jeffrey E. Shield, Leonard S. Chumbley

Department of Mechanical and Materials Engineering: Faculty Publications

A method is disclosed for detecting the T1 phase in aluminum-lithium alloys through simultaneous measurement of conductivity and hardness. In employing eddy current to measure conductivity, when the eddy current decreases with aging of the alloy, while the hardness of the material continues to increase, the presence of the T1 phase may be detected.

Microcomputer Based Digital Image Processing System Developed To Count And Size Laser-Generated Small Particle Images, K. D. Ahlers, D. R. Alexander

Department of Mechanical and Materials Engineering: Faculty Publications

A microcomputer-based digital image processing system has been developed to count and size laser-generated small particle images. Processing rates of 5 to 600 frames per minute were achieved by utilizing a real-time digital image processor. Particles from 7 to 700 µm in the plane of focus were counted and sized. A major emphasis in this work was to determine the basic problems and limitations involved with using a digital image processing scheme to accurately size particles. Areas that were investigated include the effect of the threshold level on measured particle size, particle boundary diffraction gray-level gradients, and geometric nonlinearities introduced …