Mining Engineering Commons^™

Status Of The Deep Tunnel Project Of Greater Chicago, W. J. Bauer

Mining Environmental Conference

No abstract provided.

Air Pollution Control In The Cement Industry, Russell E. Hailstone

Mining Environmental Conference

No abstract provided.

Mine Safety, James Westfield

Mining Environmental Conference

No abstract provided.

Dust Control In Underground Mining, James C. Gilliland

Mining Environmental Conference

No abstract provided.

Procedures Following Mine Fires And Explosions, W. R. Park

Mining Environmental Conference

No abstract provided.

Radon Daughters And Their Control, R. G. Beverly

Mining Environmental Conference

No abstract provided.

Proceedings Of The Mining Environmental Conference (1969, Rolla, Mo), University Of Missouri--Rolla

Mining Environmental Conference

FORWARD: Environmental problems in our complex industrial society have, in the past decade, assumed immense proportions. A population growth which will double the number of persons in the United States and in the total world in the next thirty years makes it imperative that greater care and consideration be given to the effects of industrialization on all our lives.

All industry is fair game for the advocate that suggest that there should be no change in what nature has given us. If these persons were to be followed, there would be no industrialization, no improvement in living conditions, working hours, …

Land Reclamation, A. E. Lamm

Mining Environmental Conference

No abstract provided.

Operation Green Earth, Alten Grandt

Mining Environmental Conference

No abstract provided.

The Economics Of Mined-Land Reclamation, David B. Brooks

Mining Environmental Conference

No abstract provided.

Reclaiming Mill Tailings Areas, E. R. Bingham

Mining Environmental Conference

No abstract provided.

Voluntary Land Reclamation In The Florida Phosphate Industry, Earl Wells

Mining Environmental Conference

No abstract provided.

The Present Status Of Reclamation In The Sand And Gravel Industry, W. I. Thieme

Mining Environmental Conference

No abstract provided.

Industry Viewpoint, Bryce I. Mcdonald Jr.

Mining Environmental Conference

No abstract provided.

Water Problems, Jennings Randolph

Mining Environmental Conference

No abstract provided.

Extent, Sources And Control Of Pollution From Mining Activities, Don L. Warner

Mining Environmental Conference

No abstract provided.

Acid Mine Water Control, Ronald D. Hill

Mining Environmental Conference

No abstract provided.

Deep Well Disposal Of Liquid Mine Wastes, Erle C. Donaldson

Mining Environmental Conference

No abstract provided.

Missouri Stream Studies Relating To The "New Lead Belt", Bobby G. Wixson, Ernst Bolter

Mining Environmental Conference

No abstract provided.

Introductory Remarks, Merl Baker

Mining Environmental Conference

No abstract provided.

Numerical Inversion Of The Laplace Transformation And The Solution Of The Viscoelastic Wave Equations, Abbas Ali Daneshy

Doctoral Dissertations

"In the numerical inversion of Laplace transform two general techniques of inversion are analyzed; a study of the procedures based on an expansion of f̄(s) by a polynomial in 1/s (Salzer's method) provides accurate results for certain ranges of t. A curvature criterion for the selection of the range of points for polynomial interpolation, and a geometric distribution in this interval markedly improves the range and the degree of accuracy of inversion. The results may be further improved by multiplying f̄(s) by 1/s of 1/s². Other procedures are based on approximation of f̄(t). This investigation includes a general review of …

Spacing Of Explosive Charges, Calvin J. Konya

Masters Theses

"It is generally believed that the spacing of simultaneously initiated collar primed multiple charges is not dependent on the charge length. The stresses generated by explosive charges have been assumed to propagate through a material in a cylindrical manner. this assumption implied that the stress generated in any plane along the charge diameter would have been uniform in magnitude and direction. A finite explosive velocity along with a conical stress wave causes the stresses near the collar to differ from those farther down the column. for this reason, the spacing of charges would be dependent on charge length. An experimental …

Computer Simulation Of Scraper-Pusher Behavior During Early Open Pit Mining Operations, Martin Alan Thieme

Masters Theses

"A method has been developed for study and evaluation of overburden removal systems in open pit mining. The computer simulation method shows the effect of vehicle and course characteristics and the control of loading time on overall production and cost per unit of overburden removed. Data are available from vehicle manufacturers and from past mining experience. The data are punched onto processing cards and the system is then simulated and analyzed using a digital computer. The products of the system simulation consist of a tabulated listing of all control variables after each simulated vehicle loading and a system summary predicting …

An Investigation Of The Creep Characteristics Of Portland Cement Mortar Under Static And Dynamic Strain, Ikram-Ul-Haq Dar

Doctoral Dissertations

"The combined effect of static and dynamic loads on design of underground openings is currently receiving much attention. It is known that the time-dependent behavior of rock is considerably different when a dynamic load is superimposed on prestressed rock. The shape of an underground opening has a definite influence on the magnitude of the local stresses and these may be significantly larger than those due to the weight of the overlying rock alone. Under these conditions, even a small dynamic load in the form of vibrations caused by blasting, drilling and related operations may increase the stress beyond a critical …

Centrifugal Model Study And Finite Element Analysis Of Stress Near A Fault, Christopher Haycocks

Doctoral Dissertations

"The adverse effects of faults on the stability of underground openings has long been realized. To date, however, discontinuities and most other types of geologic heterogeneities have not been amenable to mathematical analysis using the classical theories of elasticity and plasticity. This investigation examines the stress distribution around a single discontinuity and compares the experimental and numerical methods used for the analysis. The theory of elasticity, employing the equations of compatibility, equilibrium etc., was used to determine a stress function for the stress distribution around a circular hole loaded in a centrifugal field. The analysis was terminated after the stress …

A Comparison Of Friction And Drum Hoisting Systems On An Energy-Input Basis, Hemendra Nath Kalia

Masters Theses

"The purpose of this thesis is to provide a suitable basis for comparing the relative advantages of the friction and drum hoists under various conditions of operation.

Such comparisons are mainly and necessarily based upon physical characteristics of the mechanisms for lack of appropriate economic data. It is believed, however, that this inadequacy may be alleviated to some extent by substituting comparative theoretical energy requirements of' the two hoisting systems under identical duty conditions over a practical range of mining situations involving various depths and daily productions.

This has been accomplished by adapting a computer to standard mine-hoist design techniques …

A Theoretical Approach To The Problem Of Determining Ejecta Volumes In A Gravitational Vacuumed Half-Space, William J. Karwoski

Doctoral Dissertations

"The formation of an explosion crater is a highly complex process. All of the pertinent parameters governing the mechanisms of cratering are not clearly understood or known. Many cratering experiments were performed in desert alluvium in an effort to relate crater dimensions with charge weight and depth of burst. Various scaling laws were devised in an attempt to correlate the data gathered from these experiments. When cube-root scaling was used to correlate results of tests conducted at a constant scaled depth of burst, larger charge weights consistently gave smaller scaled results. This was particularly true of apparent crater volume. When …

The Effect Of Moisture On The Compressive And Tensile Strength On A Variety Of Rock Materials, Richard A. Martin

Masters Theses

"The effect of moisture on the strength characteristics of rock materials has been neglected in the study of rock mechanics. This study was undertaken to determine if there was any effect on the compressive and the tensile strength of rock by varying the moisture content from an oven-dried to a saturated condition.
It was found, by testing eight different rock materials that the compressive strength per unit area decreased with an increasing moisture content. The tensile strengths per unit area, with the exception of the quartzite and the porphyry samples, also decreased with an increase in moisture content. The tensile …

The Development Of The Sonic Pulse Technique And Its Comparison With The Conventional Static Method For Determining The Elastic Moduli Of Rock, James Harold Deatherage

Masters Theses

"The determination of the elastic moduli of rock has long been a problem to the geophysicist, mining engineer and the civil engineer. There is a considerable amount of literature on determining Young's modulus by the sonic pulse technique. However, the use of this technique to determine the three elastic constants, Young's modulus, shear modulus, and Poisson's ratio from measurements of both the longitudinal and shear wave velocities presents some difficulties, especially in the method of accurately determining the shear wave velocities.

In this thesis, what is believed to be a new method of measuring shear wave velocities in the laboratory …

A Study Of Stress Distribution And Measurement Of Axial Strain Around A Pilot Hole During Overboring, Varakantham Sreedhar Reddy

Masters Theses

"Stress distribution around a pilot hole during overcoring was investigated. A study of axial strain on the borehole surface was undertaken. Two-dimensional epoxy resin models were prepared and stress frozen in a centrifuge. The stress-frozen models were examined under a direct-viewing polariscope. The magnitude of axial strain and the effect of strain relaxation on the pilot hole were measured on blocks of brittle materials. Factors contributing to discing of core during the overcoring operation were investigated and a mechanism of failure postulated. The loading conditions simulating in situ, core and bit pressures were applied individually to the brittle models and …