Other Mechanical Engineering Commons^™

Electrokinetic Particle Trapping Performance Of Conductive Nanofiber Mats In Microfluidic Wells., Jacob Hunter West

Electronic Theses and Dissertations

The frequency dependence of electrokinetic particle trapping using large-area (>mm²) conductive carbon nanofiber (CNF) mat electrodes is investigated. The fibers provide nanoscale geometric features for the generation of high electric field gradients, which is necessary for particle trapping via dielectrophoresis (DEP). A device was fabricated with an array of microfluidic wells for repeated experiments; each well included a CNF mat electrode opposing an aluminum electrode. Fluorescent microspheres (1 µm) were trapped at various electric field frequencies between 30 kHz – 1 MHz. Digital images of each well were analyzed to quantify particle trapping. DEP trapping by the …

Oscillations Of Capillary Surfaces With Volume And Edge Effects, Dingqian Ding

All Dissertations

Capillary surfaces are defined by an interface endowed with surface tension that is partially supported by a solid substrate and are susceptible to oscillations reflecting a balance between fluid inertia and the restorative force of surface tension. The wave dynamics strongly depend upon volume change within the domain and edge effects through the boundary conditions applied at the contact-line formed at the liquid-gas-solid interface, while the spatial wave structure conforms to the geometry of the capillary surface. This dissertation develops mathematical models to address these effects for several canonical capillary surfaces, which are organized into two parts that are focused …

System Identification For Motion Control Of Unmanned Aerial Vehicles Platform, Raj Ramesh Agarwal

Theses and Dissertations

Comprehensive research on Unmanned Aerial Vehicles (UAV) system identification for motion control parameters is presented in this thesis, with a focus on the necessity of precise control and improved performance. Using Pseudorandom Binary Sequence (PRBS) and Normally Distributed Random Numbers, it presents a unique technique for excitation of UAV dynamic systems. It also shows how effective random signals are in time-domain identification for precise control in a range of flying circumstances. The piece of research includes a thorough analysis and implementation of various approaches and its further improvements, highlighting the benefits and drawbacks of each. These approaches include the free …

Guidelines For Data Collection On Energy Performance Of Higher-Education Buildings In Egypt: A Case Study, Hesham Safwat, Ahmed A. Abdel-Rehim, Iman El-Mahallawi, Abdelwahab Hussein, Engy Elshazly, Ahmad Elshamy

Mechanical Engineering

Reliable energy analysis of buildings relies heavily on high-quality data leading to proper indicators. Previous studies have highlighted the importance of data quality in analyzing energy usage in residential and non-residential buildings in order to transform declarations to actions, optimise energy efficiency policies and monitor progress and failures in countries. Collected data must adhere to national and international standards for energy performance in buildings. This study aims to provide practical guidelines for effectively collecting and preparing data suitable for evaluating energy performance in Egyptian higher-education (HE) buildings. The guidelines are developed based on a comprehensive case study, considering data availability …

Injectable And Rapidly Expandable Thrombin-Decorated Cryogels Achieve Rapid Hemostasis And High Survival Rates In A Swine Model Of Lethal Junctional Hemorrhage, Syed Muntazir Andrabi, S.M. Shatil Shahriar, Al-Murtadha Al-Gahmi, Benjamin L. Wilczewski, Mark A. Carlson, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Effective therapies are urgently needed to stabilize patients with marginally compressible junctional hemorrhage long enough to get them to the hospital alive. Herein, we report injectable and rapidly expandable cryogels consisting of polyacrylamide and thrombin (AT cryogels) created by cryo-polymerization for the efficient management of lethal junctional hemorrhage in swine. The produced cryogels have small pore sizes and highly interconnected porous architecture with robust mechanical strength. The cryogels exhibit rapid shape memory properties and prove to be resilient against fatigue. These cryogels also show high water/blood absorption capacity, fast blood clotting effect, and enhanced adhesion of red blood cells and …

Development Of A Discrete Element Model For Artificial Turf, Justin Rittenhouse

Dissertations

NFL data exhibits a distinct correlation between an elevated lower extremity injury rate and synthetic surfaces. These ubiquitous injuries frequently relate to excessive foot traction (i.e., failure to release causing fracture or soft tissue damage). Consequently, a discrete element model was developed using open-source software to analyze stud traction. First, laboratory data was collected via bench level experiments covering seventeen different testing scenarios. A minimum of twenty-five samples were collected per scenario. Total work, average torque, and maximum torque were used as indicators of stud grip. And the latter two were statistically analyzed for outliers and significant differences. Next, an …

Analysing The Results Of Solving The Problem Of A Machine Unit With Accelerator Mechanism, Yusuf Akhmedjanov

Technical science and innovation

Solutions of the obtained nonlinear differential equations of the machine unit are presented using the Maple mathematical program, determining the dependencies of changes in the parameters of the working body in the steady state as a function of the technological load on cotton for different values of the eccentricity of the tension roller of the belt drive. The article presents the changes in the angular velocities of the masses and torque on the engine shaft of the system as a function of time, the dependence of the change in the amplitude of oscillations of the accelerator shaft of the raw …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Exhaust Manifold Pressure As Engine Tuning Parameter, Kieran Truth Cunningham, Adam Sullivan Mathews, Connor Richard Smullen

Mechanical Engineering

In this project, the exhaust manifold absolute pressure (EMAP) of a 1986 Toyota Corolla was analyzed across a variety of load cases and was compared with the mass air flow (MAF) of the intake, simultaneously. Correlations were found in the trends of EMAP and MAF sensor readings that may prove helpful in tuning engines that have difficulty in accommodating a MAF sensor. These correlations were found in areas of the powerband where aftermarket tuned engines typically have poor airflow sensing. An equation was developed to spoof MAF input using EMAP and other engine operating parameters.

Pitot Tube Test Bench, Jesus Perez, Zachary Owen, Adrian Lopez

Mechanical Engineering

This Final Design Review documents the senior design project carried out by a team of Mechanical Engineering students attending California Polytechnic State University, San Luis Obispo for Roger Benham, and his company Leak Control Services Inc. The requirement was to design, build, and validate the performance of a test fixture that quantifies the performance characteristics of flow rate and pressure drop of different pitot tube designs to be used in a chemical dispensing application for Mr. Benham. This document includes relevant background research on the need for the fixture as well as relevant technical research. This document also contains objectives …

A Study On High-Frequency Bending Fatigue, Microhardness, Tensile Strength, And Microstructure Of Parts Made Using Atomic Diffusion Additive Manufacturing (Adam) And Additive Friction Stir Deposition (Afsd), Hamed Ghadimi

LSU Doctoral Dissertations

This dissertation reports the findings of several studies on the mechanical and microstructural properties of parts made using atomic diffusion additive manufacturing (ADAM) and additive friction stir deposition (AFSD). The design of a small-sized bending-fatigue test specimen for an ultrasonic fatigue testing system is reported in Chapter 1. The design was optimized based on the finite element analysis and analytical solution. The stress–life (S–N) curve is obtained for Inconel alloy 718. Chapter 2 presents the findings of ultrasonic bending-fatigue and tensile tests carried out on the ADAM test specimens. The S-N curves were created in the very high-cycle fatigue regime. …

Copper−Cystine Biohybrid-Embedded Nanofiber Aerogels Show Antibacterial And Angiogenic Properties, Anik Karan, Navatha S. Polavaram, Margarita Darder, Yajuan Su, Syed Muntazir Andrabi, S M Shatil Shahriar, Johnson V. John, Zeyu Luo, Mark A. Decoster, Yu Shrike Zhang, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Copper−cystine-based high aspect ratio structures (CuHARS) possess exceptional physical and chemical properties and exhibit remarkable biodegradability in human physiological conditions. Extensive testing has confirmed the biocompatibility and biodegradability of CuHARS under diverse biological conditions, making them a viable source of essential Cu²⁺. These ions are vital for catalyzing the production of nitric oxide (NO) from the decomposition of Snitrosothiols (RSNOs) found in human blood. The ability of CuHARS to act as a Cu²⁺ donor under specific concentrations has been demonstrated in this study, resulting in the generation of elevated levels of NO. Consequently, this dual function makes …

Improving The Energy Efficiency Of Residential Buildings In Egypt Through Whole Building Simulations, Habiba Aly

Theses and Dissertations

Residential buildings consume around 40% of total electricity consumption in Egypt. This research investigates the energy saving potential of the Green Pyramid Rating system (GPRS) and Tarsheed rating system on the building envelopes of mid-rise middle income residential buildings in Cairo through energy modelling and simulation. The study evaluates the economic feasibility of the recommendations of the two rating systems through Life Cycle Cost (LCC), Simple Payback Period (SPP), Discounted Payback Period (DPP), Net Present Value (NPV), and Internal Rate of Return (IRR) Calculations. This research also aims to develop energy efficiency recommendations to achieve 30% energy savings above the …

Smartphone Color Error Analysis, Mackenna Hawes

The Journal of Purdue Undergraduate Research

No abstract provided.

Implantation Of A Capsular Tension Ring During Cataract Surgery Attenuates Predicted Remodeling Of The Post-Surgical Lens Capsule Along The Visual Axis, Kurt A. Ameku, Caleb C. Berggren, Ryan M. Pedrigi

Department of Mechanical and Materials Engineering: Faculty Publications

Introduction: Cataract surgery permanently alters the mechanical environment of the lens capsule by placing a hole in the anterior portion and implanting an intraocular lens (IOL) that has a very different geometry from the native lens. We hypothesized that implant configuration and mechanical interactions with the post-surgical lens capsule play a key role in determining long-term fibrotic remodeling.

Methods: We developed the first finite element-growth and remodeling (FE-G&R) model of the post-surgical lens capsule to evaluate how implantation of an IOL with and without a capsular tension ring (CTR) impacted evolving lens capsule mechanics and associated fibrosis over …

Optimum Design Of Metallic And Plastic Cylindrical Gears Using Naturally-Inspired Algorithms: A Review, Marah Elsiedy, Hesham Hegazi, Ahmed Elkassas, Abdelhameed Zayed

Journal of Engineering Research

Abstract- Nowadays, several machinery and vehicles utilize mechanical elements which transmit power ranges from low, middle, and high levels depending on the type of equipment needed. Gears are the most influential design elements on any process during the running of a specific application, moreover engineers tried to obtain the optimality of a gear design which is a more compact, reliable- long service with simply operating features by following a systematic calculation of the mathematical model from standards and handbooks, however this process doesn't give the optimal design of the gears. Optimization techniques have been added to the design process for …

Engineering Neurotoxin-Functionalized Exosomes For Targeted Delivery To The Peripheral Nervous System, Mena Asha Krishnan, Olawale A. Alimi, Tianshu Pan, Mitchell Kuss, Zeljka Korade, Guoku Hu, Bo Liu, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The administration of therapeutics to peripheral nerve tissue is challenging due to the complexities of peripheral neuroanatomy and the limitations imposed by the blood–nerve barrier (BNB). Therefore, there is a pressing need to enhance delivery effectiveness and implement targeted delivery methods. Recently, erythrocyte-derived exosomes (Exos) have gained widespread attention as biocompatible vehicles for therapeutics in clinical applications. However, engineering targeted Exos for the peripheral nervous system (PNS) is still challenging. This study aims to develop a targeted Exo delivery system specifically designed for presynaptic terminals of peripheral nerve tissue. The clostridium neurotoxin, tetanus toxin-C fragment (TTC), was tethered to the …

Yap Mechanotransduction Under Cyclic Mechanical Stretch Loading For Mesenchymal Stem Cell Osteogenesis Is Regulated By Rock, Eunju Kim, Brandon D. Riehl, Tasneem Bouzid, Ruiguo Yang, Bin Duan, Henry J. Donahue, Jung Yul Lim

Department of Mechanical and Materials Engineering: Faculty Publications

While yes-associated protein (YAP) is now recognized as a potent mechanosensitive transcriptional regulator to affect cell growth and differentiation including the osteogenic transcription of mesenchymal stem cells (MSCs), most studies have reported the YAP mechanosensing of static mechanophysical cues such as substrate stiffness. We tested MSC response to dynamic loading, i.e., cyclic mechanical stretching, and assessed YAP mechanosensing and resultant MSC osteogenesis. We showed that cyclic stretching at 10% strain and 1 Hz frequency triggered YAP nuclear import in MSCs. YAP phosphorylation at S127 and S397, which is required for YAP cytoplasmic retention, was suppressed by cyclic stretch. We also …

Tractor Test 2282: John Deere 9rt 590 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test # 2283: Claas Axion 920, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary #1285: Massey Ferguson 8s 205, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Two-Phase Flow Simulations With Plic-Vof Method And Dynamic Mesh Refinement, Vimalan Adaikalanathan

Mechanical and Aerospace Engineering Dissertations - Archive

Two-phase flows are critical in a variety of engineering applications that span multiple length scales. These applications encompass macroscopic phenomena, such as dam breakage and wave-structure interactions, as well as microscopic events, including droplet impacts and boiling, and mixed-scale issues like spray dynamics. Accurate representation of evolving interfaces is essential for numerical simulations of these problems, and the Volume of Fluid (VOF) method combined with the Piecewise Linear Interface Calculation (PLIC) approach is employed to fulfill this requirement. To tackle the computational challenges associated with high-resolution meshes in deforming two-phase flows, Adaptive Mesh Refinement (AMR) is utilized to enhance mesh …

Introduce Ultrasound Fabry-Pérot Resonator For Attenuation Characterization And Sensitization Detection Of Aluminum-Magnesium Alloys, Songwei Wang

Mechanical and Aerospace Engineering Dissertations - Archive

The Ultrasound Fabry-Pérot Resonator (UFPR) is introduced as a novel technique for non-destructive evaluation and material characterization. By adapting optical Fabry-Pérot Resonator principles to ultrasonic systems, UFPR inherits advantages such as enhanced sensitivity, reduced uncertainty, and the capabilities of frequency-dependent analysis and fringe spectral analysis. This study focuses on UFPR’s application to ultrasonic attenuation characterization and sensitization detection in aluminum-magnesium alloys, which are critical for understanding microstructural changes and improving material performance.

The research was conducted in three systematic steps. First, time-frequency analysis was utilized to examine frequency-dependent attenuation behavior, establishing a foundation for ultrasonic attenuation characterization. Second, longitudinal UFPR …

Articulating Balsa Wood Bridge, Nate Harris

All Undergraduate Projects

This report describes the design, construction, and testing of a small-scale articulating balsa wood bridge that allowed passage over normally impassable terrain. The bridge was required to span a 400mm gap, while also articulating the midpoint of the bridge 140mm above its resting position. The bridge also needed to support a 20kg (44 lbs.) point load in the center of the bridge, and the bridge and articulation tower together needed to weigh less than 85 (0.19 lbs.) grams.

To construct the bridge, statics and mechanics of materials was used to design a truss that was calculated to support the load …

Tractor Test 2280: John Deere 9rt 490 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test #2295: Kubota M7-174, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test #2293: Kubota M7-134, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test # 2285: Claas Axion 940, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test #2284: Claas Axion 930 Terra Trac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary #1290: Massey Ferguson 8s 305, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …