Other Mechanical Engineering Commons^™

A Bibliometric Analysis Of Impact Energy Absorption System To Enhance Vehicle Crashworthiness, Archana Nema, Nagraj R. Gandhe

Library Philosophy and Practice (e-journal)

In automotive engineering, crashworthiness is defined as an automobile's functionality to shield its occupants from critical harm or death just in case of accidents of a given proportion. The comprehensive study observed composite materials exhibit a high specific energy absorption rate in a controlled manner while crushing. Crashworthiness research has also captured attention, especially to evaluate the energy absorbing capacity of different components made from composite material while undergoing deformation. Composite materials may be custom designed to show that specific energy absorption abilities are better than the metal structures. The present study will benefit the community of engineers resulting in …

Analysis Of Data To Evaluate The Performance Of Air Filters Used For Filtering Nanoscale Particles Generated By Smoke, Pascal J. Wagemaker

Honors College Theses

The main goal of this research project is to determine the effectiveness of commercially available air filters and to compare different kinds of commercially available air filters in certain categories. With recent record-breaking wildfires and the Covid-19 pandemic, research on the effects and features of nanoparticles has become increasingly important. Inhalation of nanoparticles in smoke can result in severe health effects on humans, affecting especially the respiratory system. As nanoparticles can pass through cell membranes, absorption occurs rapidly and affects many different parts and functions of the human body. While air filters are an effective method of reducing small-sized particles …

Six-Sigma Quality Management Of Additive Manufacturing, Hui Yang, Prahalad Rao, Timothy Simpson, Yan Lu, Paul Witherell, Abdalla R. Nassar, Edward Reutzel, Soundar Kumara

Department of Mechanical and Materials Engineering: Faculty Publications

Quality is a key determinant in deploying new processes, products, or services and influences the adoption of emerging manufacturing technologies. The advent of additive manufacturing (AM) as a manufacturing process has the potential to revolutionize a host of enterprise-related functions from production to the supply chain. The unprecedented level of design flexibility and expanded functionality offered by AM, coupled with greatly reduced lead times, can potentially pave the way for mass customization. However, widespread application of AM is currently hampered by technical challenges in process repeatability and quality management. The breakthrough effect of six sigma (6S) has been demonstrated in …

Anisotropic Scaffolds For Peripheral Nerve And Spinal Cord Regeneration, Wen Xue, Wen Shi, Yunfan Kong, Mitchell Kuss, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The treatment of long-gap (>10 mm) peripheral nerve injury (PNI) and spinal cord injury (SCI) remains a continuous challenge due to limited native tissue regeneration capabilities. The current clinical strategy of using autografts for PNI suffers from a source shortage, while the pharmacological treatment for SCI presents dissatisfactory results. Tissue engineering, as an alternative, is a promising approach for regenerating peripheral nerves and spinal cords. Through providing a beneficial environment, a scaffold is the primary element in tissue engineering. In particular, scaffolds with anisotropic structures resembling the native extracellular matrix (ECM) can effectively guide neural outgrowth and reconnection. In …

Dynamics Of Running Processes In The Area Of Underless Water Intake, D.R. Bazarov, M.P. Tashkhanova, A. Gayur, M. Sapaeva

Irrigation and Melioration

The paper analyzes the dynamics of channel processes based on the results of field studies of the Amudarya River at the site of the damless water intake to the Karshi Magistralny Canal (KMK) and developed recommendations for improving the water intake conditions. Based on the results of field studies of the head section of the inlet channel, an assessment of the state of the Amudarya river bed in the water intake zone was made. The results of studies of the hydraulic and alluvial regimes of the Amu Darya River in the area of the damless water intake are generalized The …

Determination Of The Optimal Hydromodule Of Irrigation Network For Drip Irrigation, R.Zh. Karshiev, A. Urazkeldiev, A.H. Radjabov, A.I. Ernazarov

Irrigation and Melioration

Most of the irrigation canals operating in the country were built in the 60s and 80s of the XX century, their hydraulic parameters were designed and adapted to the irrigation regimes of agricultural crops, mainly for surface irrigation, and the average hydromodule values were 0,8-1,0 l / s. , the hydraulic parameters of the channel are designed to carry large volumes of water in a short period of time. Over the next 3-4 years, the introduction of water-saving technologies in the irrigation of agricultural crops by farms and "Clusters" requires the improvement of hydraulic methods of irrigation management, the use …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, Kh.Sh. Gafforov, Sh.D. Sh.D.Tursunboev

Irrigation and Melioration

The importance of assessing past and future climate differences plays an important role in future planning in relation to climate change. This situation requires urgent and concerted action in several areas: technology, infrastructure, politics, economics, and the environment. The article evaluates the impact of changes in precipitation intensity on the water level in the global circulation model (GCM) RCP 4.5 and 8.5 scenarios in the 2030s, 2050s, and 2070s. This study is a useful reference for improving water resource management and ensuring the sustainability of agricultural products in the future, as well as for improving operational water management and agricultural …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, В.K. Saliev

Irrigation and Melioration

The article examines the assessment of the state and problems of irrigation water use in the republic in the past and in the near future. A comparative analysis of the state of water resources use for the period of the last 30 years from 1989 to 2019 was carried out.According to the estimates, own water withdrawal for 5 years (2014/15-2018/19) shows that an average of 53.2 m3, including 50.5 billion m3 from rivers At present (2018-2019), an average of 57.06 billion m3 of water is taken for irrigation of 4.289 million hectares of land, against 63.02 billion m3 approved in …

Environmental Damage Caused By Transport Equipment Waste, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

The article suggests a new approach to the monetary assessment of the damage caused to the environment by the processed waste of the transport sector. The proposed assessment method is based on the waste collection factor, all types of irretrievable losses and the volume of necessary compensatory release of materials. Based on a survey among vehicle owners, it was found that the solid waste collection rate is about 50 %, while the waste collection rate for operating fluids does not exceed 32 %. In this regard, the bulk of the damage to the environment is caused by liquid waste. Calculations …

Research Of Stress-Deformed State Of Multi-Connected Complex Shell Structures, Т.М. Маvlanov, Sh.O. Khudainazarov, B. Yalgashev, O.S. Nurova

Irrigation and Melioration

Conducting numerical experiments for complex structurally inhomogeneous structures allows us to understand the qualitative picture of the effect of various parameters in a wide range of studies and to give sound recommendations at the design stage for conducting laboratory model and field experiments. In this paper, on the basis of the classical theory of elasticity, the basic equations characterizing the stress-strain state of complex multiply connected shell structures are given and a specific problem is solved. At the same time, some of the structural elements have viscoelastic properties. When solving the problem, the behavior of the structure for the n-th …

To The Determination Of The Critical Circuit Speed Of The Sharing Drum, Kh. Kh. Igamberdiev, A.B. Mukhitdinov

Irrigation and Melioration

The article is devoted to the theoretical definition of the critical circumferential speed of the stripping drum of a kena harvester, which depends on the drum diameter, diameter and weight of the stems. It was determined from the equality of the change in the momentum of the stem during impact, i.e. from a shock impulse acting on the stem. The shock impulse is determined when the drum blade touches the stem in the process of stripping, which acts on the mass of the entire stem. The duration of the impact of the drum stripping on the stem was determined from …

An Innovative Seeder For Sowing Non-Loose Seeds Of Saxaul And Cherkez, E.T. Farmonov

Irrigation and Melioration

The main reasons for the absence of a seeder for mechanized sowing of non-loose seeds of fodder plants in deserts are analyzed in the article. The author has developed a technology for sowing non-loose seeds (saxaul and cherkez), which prevents clogging, crushing and breakage in the seeder hopper, and provides for uniform and stable sowing at a set rate and shallow depth over the entire field area without reducing the biological germination. An innovative seeder with a universal sowing unit is recommended. Field tests of the innovative seeder with the proposed universal sowing unit were conducted in February 2020, as …

Recommendations For The Analysis And Safety Assessment Of Turbid Sediments In Flood Reservoirs, А. Yangiev, Sh. Panjiev, D. Adjimuradov

Irrigation and Melioration

The article presents the results of field research conducted in Langar, Dehkanabad, Shurabsoy flood reservoirs in the Kashkadarya region.There are many problems as a result of floods in the reservoirs, there are disturbances in the discharge and drainage facilities during the passage of accidental floods.At the same time, there was a large accumulation of turbid-sediments in flood reservoirs.In the article, the results of the calculations using empirical formulas for predicting the amount of turbid sediments in Langar, Dehkanabad, Shurabsoy flood reservoirs up to 2025-2030 years are also presented, and it is noted that at present their useless volumes are full …

Justification Of Parameters Of Replaceable Working Parts Of A Combined Machine, А.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

In article are described the design and options for completing the replaceable working parts of the combined machine for continuous tillage which of the formation of ridges and ridges for sowing re-crops. The parameters of the ridge former and apron-leveler of this machine have been substantiated. The rational values of the parameters of the comb-former are: length 600 mm, width of the entrance edge 680 mm, height of the blade 160 mm, length of the side edge of the blade 178 mm. The rational values of the working length and height of the leveling apron are 220 mm and 200 …

Development Of An Algorithm For Optimization Of Continuous Technological Process Of Cultivation Of Microorganisms, Sh.R. Rakhmanov

Irrigation and Melioration

In article the analysis of possible modes of microalgae cultivation has been carried out. Two optimization algorithms are substantiated. The first one is based on the method of random search with an absolute bias, an algorithm for optimizing the process of cultivating microorganisms with continuous regeneration of the flow in one cultivator. The second is an algorithm for determining the optimal residence time of chlorella particles in multistage cultivators, focused on the method of dynamic programming, implemented in Wellman's recurrence relation. The developed algorithm for operational forecasting and automatic control of the chlorella cultivation process allows, under given production conditions …

Covid-19 Impact To Family Food Consumption And Income In Uzbekistan: Results Of An Online Survey, Kh. Pardaev, Sh. Hasanov, S. Mamasoliev, Sh. Muratov, R. Kalandarov, U. Nurullaev

Irrigation and Melioration

This article aims to study the impact of the pandemic on food consumption by families in Uzbekistan. The shock of the pandemic is threatening the well-being of families in Uzbekistan, as in all developing countries. The study focuses on the effects of changes in food prices, declining consumption, and changes in household incomes. The Instrumental regression model was used in the factor impact analysis. Data for analysis were collected online by messenger groups from families in urban and rural areas of Uzbekistan. Results of the Econometric analysis demonstrated that the decline in food consumption in households was assessed by a …

Status Of Crop Diversification And Its Empirical Analysis: A Case Study Of The Republic Of Uzbekistan, A.E. Primov

Irrigation and Melioration

The main objective of this study is to determine the status and level of crop diversification among farms in the country through an empirical analysis using panel data collected in 2009-2017. In doing so, we performed the Stata-16 software using the Simpson Diversification Index model in determining the diversification index. According to the results, the highest diversification indicators were found for Samarkand, Fergana and Tashkent regions, respectively, and accounted for 0.74, 0.74 and 0.76, respectively. It can be seen that the existing farms in Tashkent region used more diversified crops than in other regions of the country. The average diversification …

Efficiency Of Using Graphic Software In The Design Of Hydrotechnical Structures, U.A. Nasritdinova, A.M. Khodjaev, Z.I. Kayumova

Irrigation and Melioration

The article examines the work of scientists engaged in research in this area in the design of hydrotechnic structures. The possibilities of design programs for the application of the results of scientific research in the educational process were used. Thanks to the design in these programs, practical tasks are carried out with the utmost precision. The use of computer technology in teaching the subject "Hydrotechnical structures" and the use of graphic software AutoCAD in the design of linear platforms for clothing, curved platforms for clothing from hydrotechnical structures are shown in 2D and 3D three-dimensional modeling.

Modulation Of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation Of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Monemianesfahani, Kristina Seiffert-Sinha, James K. Wahl Iii, Jung Yul Lim, Animesh A. Sinha, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

It is becoming increasingly clear that mechanical stress in adhesive junctions plays a significant role in dictating the fate of cell–cell attachment under physiological conditions. Targeted disruption of cell–cell junctions leads to multiple pathological conditions, among them the life-threatening autoimmune blistering disease pemphigus vulgaris (PV). The dissociation of cell–cell junctions by autoantibodies is the hallmark of PV, however, the detailed mechanisms that result in tissue destruction remain unclear. Thus far, research and therapy in PV have focused primarily on immune mechanisms upstream of autoantibody binding, while the biophysical aspects of the cell– cell dissociation process leading to acantholysis are less …

Modulation Of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation Of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Esfahani, Kristina Seiffert-Sinha, James K. Wahl Iii, Jung Yul Lim, Animesh A. Sinha, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

It is becoming increasingly clear that mechanical stress in adhesive junctions plays a significant role in dictating the fate of cell–cell attachment under physiological conditions. Targeted disruption of cell–cell junctions leads to multiple pathological conditions, among them the life-threatening autoimmune blistering disease pemphigus vulgaris (PV). The dissociation of cell–cell junctions by autoantibodies is the hallmark of PV, however, the detailed mechanisms that result in tissue destruction remain unclear. Thus far, research and therapy in PV have focused primarily on immune mechanisms upstream of autoantibody binding, while the biophysical aspects of the cell– cell dissociation process leading to acantholysis are less …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

Common Pool Resource Management: Assessing Water Resources Planning For Hydrologically Connected Surface And Groundwater Systems, Francisco Munoz-Arriola, Tarik Abdel-Monem, A. Amaranto

Department of Mechanical and Materials Engineering: Faculty Publications

Common pool resource (CPR) management has the potential to overcome the collective action dilemma, defined as the tendency for individual users to exploit natural resources and contribute to a tragedy of the commons. Design principles associated with effective CPR management help to ensure that arrangements work to the mutual benefit of water users. This study contributes to current research on CPR management by examining the process of implementing integrated management planning through the lens of CPR design principles. Integrated management plans facilitate the management of a complex common pool resource, ground and surface water resources having a hydrological connection. Water …

Part-Scale Thermal Simulation Of Laser Powder Bed Fusion Using Graph Theory: Effect Of Thermal History On Porosity, Microstructure Evolution, And Recoater Crash, Reza Yavari, Ziyad Smoqi, Alex Riensche, Ben Bevans, Humaun Kobir, Heimdall Mendoza, Hyeyun Song, Kevin Cole, Prahalada Rao

Department of Mechanical and Materials Engineering: Faculty Publications

Flaw formation in laser powder bed fusion (LPBF) is influenced by the spatiotemporal temperature distribution – thermal history – of the part during the process. Therefore, to prevent flaw formation there is a need for fast and accurate models that can predict the thermal history as a function of the part shape and processing parameters. In previous work, a thermal modeling approach based on graph theory was used to predict the thermal history in LPBF parts in less-than 20% of the time required by finite element-based models with error within 10% of experimental measurements. The present work transitions toward the …

Development Of Novel Hardware And Software For Wind Turbine Condition Monitoring, Ryan A. Zhan

Master's Theses

With the increased use of wind turbines as sources of energy, maintenance of these devices becomes more and more important. Utility scale wind turbines can be time consuming and expensive to repair so an intelligent method of monitoring these devices is important. Commercial solutions for condition monitoring exist but are expensive and can be difficult to implement. In this project a novel condition monitoring system is developed. The priority of this system, dubbed the LifeLine, is to provide reliable condition monitoring through an easy-to-install and low-cost system. This system utilizes a microcontroller to collect acceleration data to detect imbalances on …

Ram Air-Turbine Of Minimum Drag, Raymond Akagi

Master's Theses

The primary motivation for this work was to predict the conditions that would yield minimum drag for a small Ram-Air Turbine used to provide a specified power requirement for a small flight test instrument called the Boundary Layer Data System. Actuator Disk Theory was used to provide an analytical model for this work.

Classic Actuator Disk Theory (CADT) or Froude’s Momentum Theory was initially established for quasi-one-dimensional flows and inviscid fluids to predict the power output, drag, and efficiency of energy-extracting devices as a function of wake and freestream velocities using the laws of Conservations of Mass, Momentum, and Energy. …

Chilling And Heat Accumulation Of Fruit And Nut Trees And Flower Bud Vulnerability To Early Spring Low Temperatures In New Mexico: Meteorological Approach, Koffi Djaman, Komlan Koudahe, Murali Darapuneni, Suat Irkmak

Department of Mechanical and Materials Engineering: Faculty Publications

Fruit and nut trees production is an important activity across the southwest United States and this production is greatly impacted by the local climate. Temperature is the main environmental factor influencing the growth and the productivity of the fruit and nut trees as it affects the trees’ physiology and the vulnerability of flower bud, flowers, and young fruit and nut to the low temperatures or spring frost. The objective of the present study is to estimate the chilling and heat accumulation of fruit and nut trees across New Mexico. Three study sites as Fabian Garcia, Los Lunas, and Farmington were …

Characterization Of The Strain-Rate–Dependent Mechanical Response Of Single Cell–Cell Junctions, Amir Monemian Esfahani, Jordan Rosenbohm, Bahareh Tajvidi Safa, Nickolay V. Lavrik, Grayson Minnick, Quan Zhou, Fang Kong, Xiaowei Jin, Eunju Kim, Ying Liu, Yongfeng Lu, Jung Yul Lim, James K. Wahl Iii, Ming Dao, Changjin Huang, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Cell–cell adhesions are often subjected to mechanical strains of different rates and magnitudes in normal tissue function. However, the rate-dependent mechanical behavior of individual cell– cell adhesions has not been fully characterized due to the lack of proper experimental techniques and therefore remains elusive. This is particularly true under large strain conditions, which may potentially lead to cell–cell adhesion dissociation and ultimately tissue fracture. In this study, we designed and fabricated a single-cell adhesion micro tensile tester (SCAμTT) using twophoton polymerization and performed displacement-controlled tensile tests of individual pairs of adherent epithelial cells with a mature cell–cell adhesion. Straining the …

Irrigation Management In Potato (Solanum Tuberosum L.) Production: A Review, Koffi Djaman, Suat Irkmak, Komlan Koudahe, Samuel Allen

Department of Mechanical and Materials Engineering: Faculty Publications

Limited water resources coupled with the increase of the human population calls for more efficient use of water in irrigated agriculture. Potato (Solanum tuberosum L.) is one of the most widely grown crops worldwide and is very sensitive to water stress due to its shallow rooting system. With the dilemma of potato sensitivity to drought and limited available water resources restricting crop production, researchers and crop growers have been investigating different approaches for optimizing potato yield and improving crop water use efficiency under different irrigation methods. While potato response to water is affected by other management practices such as fertilizer …

Ultrasonic Mapping Of Hybrid Additively Manufactured 420 Stainless Steel, Luz D. Sotelo, Haitham Hadidi, Cody S. Pratt, Michael P. Sealy, Joseph A. Turner

Department of Mechanical and Materials Engineering: Faculty Publications

Metal hybrid additive manufacturing (AM) processes are suitable to create complex structures that advance engineering performance. Hybrid AM can be used to create functionally graded materials for which the variation in microstructure and material properties across the domain is created through a synergized combination of fully coupled manufacturing processes and/or energy sources. This expansion in the engineering design and manufacturing spaces presents challenges for nondestructive evaluation, including the assessment of the sensitivity of nondestructive measurements to functional gradients. To address this problem, linear ultrasound measurements are used to interrogate 420 stainless steel coupons from three manufacturing methods: wrought, AM, and …

Unveiling Precipitation Behavior In Mg-Y Based Alloys, Qingchun Zhu, Yangxin Li, Zhigang Ding, Jian Wang, Yuxuan Liu, Huan Zhang, Tian Xie, Mingxu Wang, Hong Zhu, Tao Ying, Wei Liu, Xiaoquin Zeng

Department of Mechanical and Materials Engineering: Faculty Publications

Mg-Y based alloys exhibit a promising combination of strength and deformability through tuning precipitation and solute strengthening mechanisms and tailoring the activity of non-basal dislocations. Understanding the precipitation sequence of Mg-Y based alloys and its dependence on Yttrium concentration in the matrix will provide a guideline for fine tuning structure, morphology and distribution of precipitates in Mg-Y based alloys. In this paper, we explore the precipitation behaviors of Mg-11Y (wt%) and Mg-11Y-1Al (wt%) alloys using aberration-corrected scanning transmission electron microscopy, and rationalize the experimental observations based on first-principles density functional theory calculations. The precipitation sequence during ageing at 225 °C …