Balancing Of Production Line In A Bearing Industry To Improve Productivity, Sudharsan Sridhar, Balthilak Anandaraj, Santhosh B

The Hilltop Review

Line balancing addresses the issues of balancing production or assembly line and it generally minimizes the idle time for all the events and the combinations of workstations. Factors such as lack of materials, design changes in the product, labor position may also be needed for line balancing. We approached the industry and proposed a heuristic solution solving in two different platforms, by rearranging the existing tasks over the work stations, so that the idle time of the machines are reduced to minimum and the other is by using Timer Pro software where grouping of similar kind of activities are to …

Measurement And Analysis Of The Physical And Climatic Distribution Environment For Air Package Shipment, David Guadagnini

Master's Theses

The modern air parcel distribution industry has significantly grown to become one of the most commonly employed methods to quickly transport goods throughout the world. Although it comes with many benefits, including higher speed, greater reliability, and tighter security, the multimodal transport system within it can expose packages to a wide variety of climatic and physical distribution hazards. In a single route of transportation, packages could be included in different types of small delivery vans, large commercial semi trucks, cargo dollies, feeder aircraft, and high altitude commercial jetliners. The varying hazard level presented during distribution could directly weaken the packaging …

Bear Minimum: Ultralight Composite Bear Canister, Rama B. Adajian, Adam C. Eisenbarth

Mechanical Engineering

The ultralight backpacking community needs a strong, easy to use, safe bear canister that is lighter than current market products for trekking in the backcountry. A full design of the lid for the bear canister is to be completed. This includes the locking mechanism to ensure it is bear proof, the interface between the lid and the canister, and the structure of the lid so it passes the strength and weight specifications. The lid, along with the already designed canister body, is to be manufactured with formal documentation. The lid will initially be tested separately and then with the canister …

Development Of 3d Compression Molded Composite Primary Structure, Sean D. Tischler, Jacob H. Goldstein, Alea A. Perez

Mechanical Engineering

The work accomplished by the Black Gold team improved upon the carbon fiber compression molding research and information available on the Cal Poly San Luis Obispo campus. The team used the rear suspension rocker arm off a Ventana Alpino mountain bike as a design goal for this project. This research and body of work includes the methods used to design a compression molded part for complex part loading and shape. This extends to the process of choosing an appropriate layup process, in addition to benefits and drawbacks of the use of chopped fibers in compression molding. The research includes the …

Cal Poly Compost Chomper, David Anthony Jungquist, Cory James Parmenter, Joseph Mark Mcgill

Mechanical Engineering

The purpose of this final design report is to detail the design, manufacturing, and testing of a bicycle powered compost cutter for use by the Captain Raymond Collin’s Elementary school. Students in the garden program are tired of manually chopping up garden waste into small enough pieces to be composted effectively. Project Sponsor and Master Gardener, Susan Deogracias had the idea to create a pedal powered compost cutter which would save time and improve moral for the aspiring gardeners.

This report details the ideation process the team went through in defining the compost cutting system. Engineering methods are documented for …

Micro-Spi Sediment Profile Imaging Micro-Inspector, Andrew P. Corvin, Caleb T. Davies, Matt R. Ferrari

Mechanical Engineering

This project was proposed by Dr. Brian Paavo through a desire to more easily study the benthic sediment layers of the ocean. To do so, he asked us to build a simple and compact machine for use in sediment profile imagery (SPI). Although devices like this already exist, they are all large scale devices that require a ship with a crane to deploy, which is expensive and time consuming. Instead, he desired a “micro” SPI, which is capable of being deployed from a small vessel that can easily navigate shallow waters. Our interpretation of these requirements was as follows: a …

Pedal-Powered Drivetrain System, Geremy J. Patterson, Callaghan Fenerty, Bradley Welch

Mechanical Engineering

No abstract provided.

Deployable Antenna For Cubesat, Mackenzie Thomas Lennon, Caleb Andrew Barber, David Matthew Galves

Mechanical Engineering

This project is a proof-of-concept ground model of a large deployable antenna designed for the small space requirements of CubeSats. This small deployment module is designed to fit a 2 m by 1 m reflective antenna inside a storage volume of with the dimensions 20 cm by 20 cm x 40 cm. The reflector will be deployed to a parabolic shape with the goal of modeling the reflector necessary for high frequency communication. Because this module is designed as a proof-of-concept for the deployable parabolic reflector specifically, no electrical components will be incorporated and will just focus on the deployment …

Swanton Pacific Railroad - Track Maintainer Upgrades, Jakob Graf, Dustin Platt

Mechanical Engineering

This project’s sponsor is Swanton Pacific Railroad, a 1/3 scale railroad in Santa Cruz, CA. Our team was given the task of upgrading a maintenance cart used to clear debris from the track and level the gravel ballast during maintenance projects. Our focus was to upgrade the blowing system used to clear any debris. The current system used is a hydraulic fan with a single length of ducting serving as its outlet. Our solution is to mount two Stihl backpack leaf blowers to manufactured saddles and mount the assembly to the cart in place of the hydraulic fan. Ducting is …

Grey Water Capture, Paul B. Brenneman, Vicente J. Ramirez, Kevin J. Alexander

Mechanical Engineering

Many households today do not implement any kind of grey water recycling system. People do not get a grey water system for a variety of reasons; the benefits could be unknown, the uses for grey water could be limited in their specific home, or the economic gain is too minimal to constitute a modification to the house.

For our project, we are going to design an easy to install product that enables the reuse of grey water from household sources. Examples of our final product could be something that lets the customer use grey water from the bathroom sink to …

A Computational Fluid Dynamics Study On Bidirectional Glenn Shunt Flow With An Additional Pulsatile Flow Through A Modified Blalock-Taussig Shunt, Seda Aslan

LSU New Orleans Theses and Dissertations

The blood flow through the Bidirectional Glenn shunt (BGS) and modified Blalock-Taussig shunt (mBTS) to the pulmonary arteries (PAs) was analyzed using Computational Fluid Dynamics. This study consisted of the steady and pulsatile cases. In case one, the results of blood flow through the BGS for the Newtonian and non-Newtonian viscosity models were compared. Case two focused on having an additional pulsatile blood flow through the mBTS using the non-Newtonian Carreau viscosity model. The geometries were created based on the angiograms. In case one, boundary conditions to be specified at the inlets were obtained from the flow rate measurements via …

Numerical Simulation Of Enhancement In Co2 Sequestration With Various Water Production Schemes Under Multiple Well Scenarios, Li Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

CO₂ geological sequestration simultaneously combined with water production from deep saline aquifers can effectively address the challenge faced by the modern energy systems for reducing the CO₂ emissions and water intensity while providing reliable, affordable, and secure energy. However, little attention has been paid to date in the literature on determining the best CO₂ injection strategy for achieving both the optimal water production and the optimal CO₂ space storage capacity while maintaining operational safety. This research first establishes three injection-extraction scenarios based on the typical geological parameters of the Junggar Basin in China to analyze the …

Particle Enrichment In Longitudinal Standing Bulk Acoustic Wave Microfluidics, Mingyang Cui

McKelvey School of Engineering Graduate Student Theses & Dissertations

Separation, isolation, and enrichment of targeted nano- and microparticles are critical to a variety of biomedical applications from clinical research (development of therapeutics and diagnostics) to fundamental investigations that require concentration of specific cells from culture, separation of target species from heterogenous mixtures, or controlled perturbation of cells and microorganisms to determine their response to stimuli. Numerous techniques are available for bench-scale and medical settings; however, these traditional approaches are often labor intensive, time-consuming, costly, and/or require modification of the target. Efficiency and specificity are also lacking. Recently, techniques that exploit the similar scales of microfluidic technologies and the intrinsic …

Investigating The Classical And Non-Classical Mechanical Properties Of Gan Nanowires, Mohammad Reza Zamani Kouhpanji

Electrical and Computer Engineering ETDs

Study and prediction of classical and non-classical mechanical properties of GaN is crucial due to the potential application of GaN nanowires (NWs) in piezoelectric, probe-based nanometrology, and nanolithography areas. GaN is mainly grown on sapphire substrates whose lattice constant and thermal expansion coefficient are significantly different from GaN. These discrepancies cause mechanical defects and high residual stresses and strains in GaN, which reduce its quantum efficiency.

Specifically, for nanoscale applications, the mechanical properties of materials differ significantly compared to the bulk properties due to size-effects. Therefore, it is essential to investigate the mechanical properties of GaN NWs using the non-classical …

Determining Drag Forces On 3d Printed Shark Skin And The Conditions In Which Drag Forces Are Reduced, Kayla M. Bartnicke

Mechanical Engineering Undergraduate Honors Theses

ABSTRACT

This project was conducted at the University of Arkansas with access to 3D printers and a water tunnel. The project examines drag forces over 3D-printed shark skin. Shark skin was chosen to be studied because of its unique three-pronged denticle shape and the assumption that this unique shape has a purpose, such as drag reduction.

A shark denticle was designed using SolidWorks software, multiplied 164 times creating a total skin area of 17.5 in², and printed using both a MakerBot Replicator 2 3D printer and an Ultimaker 2 Go 3D printer. The shark skin was initially printed …

Surface Acoustic Wave Based Pumping In A Microchannel, Tao Wang, Qi Ni, Nathan B. Crane, Rasim Guldiken

Faculty Publications

Pumping and manipulation of liquids in microfluidic channels is important for many mechanical, chemical and biomedical applications. Surface acoustic wave based devices fabricated on high-efficiency piezoelectric substrates have been recently investigated for mixing and separation application within microfluidic channels. In this paper, we introduce a novel integrated surface acoustic wave based pump for liquid delivery and precise manipulation within a microchannel. The device employs a hydrophobic surface coating (Cytop) in the device design for decreasing the friction force and increasing the bonding. Contrary to previous surface acoustic wave based pump, this device does not need precise layers of water and …

Next Steps For Mentoring Program, Patrick Gray

Sustainability and Connectivity

This file provides a jump-off position for students in the fall 2017 semester who want to continue work toward a mentoring program.

Design And Development Of A High Altitude Wind Tunnel (Hat), David Ritchie

Research Horizons Day Posters

No abstract provided.

Simulation And Analysis Of A Drilling Fluid Using A Herschel-Bulkley Model, Daniel Powell

Mechanical Engineering ETDs

In the study, a drilling fluid with known properties is analyzed and simulated in the laminar regime through a pipe with dimensions of 1.5m in length and 0.02m in diameter. The purpose of the conducted analysis is to demonstrate the advantages of the Herschel-Bulkley model currently used in the oil and gas industry for analyzing non-Newtonian drilling fluids.

For comparison, the analysis is also performed using more simple models for non-Newtonian fluids such as the Bingham Plastic model and the Power Law model and for a Newtonian fluid (water). In addition to analytical models, computations are conducted using …

Superpositioning High Power Lasers For Mid-Air Image Formations, Auston Viotto

UCARE: Research Products

This research evaluates different methods to create voxels, 3-dimensional pixels, in air without the need for special glasses or reflections off of surfaces. Research on the advantages of superimposing or the culmination, focusing, of laser light will be conducted. The point of superpositioning/culmination will be evaluated by the brightness of the voxel due to the Rayleigh Scatter Effect. The voxel’s brightness is dependent on the laser output strength and inversely proportional to its wavelength. Once a superimposed/culminated voxel has been created in the lab the next step will be to manipulate the location of the voxel through 3-dimensional space. This …

Primary Blast Waves Induced Brain Dynamics Influenced By Head Orientations, Yi Hua, Yugang Wang, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

There is controversy regarding the directional dependence of head responses subjected to blast loading. The goal of this work is to characterize the role of head orientation in the mechanics of blast wave-head interactions as well as the load transmitting to the brain. A three-dimensional human head model with anatomical details was reconstructed from computed tomography images. Three different head orientations with respect to the oncoming blast wave, i.e., front-on with head facing blast, back-on with head facing away from blast, and side-on with right side exposed to blast, were considered. The reflected pressure at the blast wave-head interface positively …

Project Plan - Mentoring, Abigail Lisjak, Patrick Gray, Timothy Leonard, Adam Foster

Sustainability and Connectivity

A presentation that includes the ideal goal for the project as well as how the project can relate to the other projects in the class.

Corgi: Compute Oriented Recumbent Generation Infrastructure, Christopher Allen Hunt

Master's Theses

Creating a bicycle with a rideable geometry is more complicated than it may appear, with today’s mainstay designs having evolved through years of iteration. This slow evolution coupled with the bicycle’s intricate mechanical system has lead most builders to base their new geometries off of previous work rather than expand into new design spaces. This crutch can lead to slow bicycle iteration rates, often causing bicycles to all look about the same. To combat this, several bicycle design models have been created over the years, with each attempting to define a bicycle’s handling characteristics given its physical geometry. However, these …

Binder-Jet Printing Of Fine Stainless Steel Powder With Varied Final Density, Mohsen Ziaee, Eric M. Tridas, Nathan B. Crane

Faculty Publications

Binder jetting is an additive manufacturing process that produces relatively weak porous parts that are strengthened through sintering and/or infiltration. This paper reports on two different methods of preparing fine 316 stainless steel powder and their impact on the final sintered density and dimensions relative to direct printing into -22 micron powder. The first method uses agglomerates of fine powder. In the second, nylon 12 powders are mixed with the steel powder as a fugitive space holder to increase porosity. Sintered density and sintering shrinkage of agglomerate material are shown to vary with the density of the spread powder bed. …

Skin Strain Measurement To Predict Knee Joint Angles Through Nanocomposite Stain Gauges, Adin Martineau, James Tracy, Gavin Collins, Parker Rosquist, Dustin A. Bruening, Matt K. Seeley, David T. Fullwood, Anton E. Bowden

Biomedical Engineering Western Regional Conference

Explores the possibility of using high deflection nanocomposite strain gauges as knee joint angle sensor.

Redesign Of Computer Keyboards For Hospital And Consumer Use, Kent Williams, Brian Jensen, Anton Bowden

Biomedical Engineering Western Regional Conference

Application of carbon nanotube coatings to computer keyboards in order to reduce the spread of bacteria in hospitals and homes.

Keywords: carbon nanotube, bacteria, antimicrobial, keyboard, design, MRSA, biofilm

A Nanocomposite Sensor Neck Sleeve For Tracking In Vivo Spine Kinematics In The Alpaca, Colton Porter Graham, Anton Bowden

Biomedical Engineering Western Regional Conference

Chronic low back pain in the US is often attributed to intervertebral disc degeneration. Camelids, particularly alpacas, pose a potential model for spinal treatment due to similarity of the spinal structure and vertical loading. Alpacas also exhibit a high rate of natural disc degeneration. To gain more understanding about how disc degeneration is caused in alpacas it is necessary to understand the loading and motion of the alpaca cervical spine. The goal of the present work was to incorporate nanocomposite sensors into a custom-designed neck sleeve to track the daily in-vivo neck motion of an alpaca in its natural environment.

The Effect Of Biocomposite Material In A Composite Structure Under Compression Loading, Benjamin Andrew Sweeney

Master's Theses

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will consist of a one internal bamboo veneer biocomposite ply; and two external carbon fiber weave composite plies surrounding the bamboo biocomposite. To acquire results …

Dirichlet Process Gaussian Mixture Models For Real-Time Monitoring And Their Application To Chemical Mechanical Planarization, Jia (Peter) Liu, Omer F. Beyca, Prahalad K. Rao, Zhenyu (James) Kong, Satish T. S. Bukkapatnam

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this work is to use sensor data for online detection and identification of process anomalies (faults). In pursuit of this goal, we propose Dirichlet process Gaussian mixture (DPGM) models. The proposed DPGM models have two novel outcomes: 1) DP-based statistical process control (SPC) chart for anomaly detection and 2) unsupervised recurrent hierarchical DP clustering model for identification of specific process anomalies. The presented DPGM models are validated using numerical simulation studies as well as wireless vibration signals acquired from an experimental semiconductor chemical mechanical planarization (CMP) test bed. Through these numerically simulated and experimental sensor data, we …

Nebraska Summary: S1141 John Deere 6120r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …