Other Mechanical Engineering Commons^™

Handitrike - Recumbent Tricycle, Sean Higginson, Kevin Howie, Vinay Patel

Mechanical Engineering

This report covers the design and construction of the recumbent racing tricycle for Mr. Robert T. Kelly, a disabled veteran. Unfortunately Rob’s right leg is five inches shorter than his left one and therefore is unable to properly operate standard cranks. Our team HandiTrike is composed of Sean Higginson, Kevin Howie, and Vinay Patel and our project requires us to come up with a design that is feasible to complete within the given three quarters, as well as allow Rob to gain full use of his tricycle. Currently Rob ‘s trike uses the standard crank set up found on most …

Formula Sae Turbocharger Engine Development, Eric Griess, Kevin Mccutcheon, Matthew Roberts, William Chan

Mechanical Engineering

This project, Formula SAE Turbocharger System Development, was sponsored by the Cal Poly, San Luis Obispo Formula SAE team. The team proposed this project in order to have a powerful yet lightweight engine so they can be extremely competitive at their competition. The baseline output of the single cylinder 450cc engine (2006 Yamaha WR450F) was 46 horsepower and 27 ft-lb of torque. The goal of this project was to increase the output of that engine to 60 horsepower and 35 ft-lb through the use of a turbocharger.

Formula Hybrid Drivetrain Design, Zachary (Zak) Mcfarland, Alex Pruitt, William Domhart

Mechanical Engineering

The Formula Hybrid senior project group was tasked with designing and building a drivetrain system for the Cal Poly Society of Automotive Engineers (SAE) Formula Hybrid (FHSAE) team. FHSAE gave customer requirements for performance and geometry for the drivetrain and the FHSAE rulebook has guidelines regarding safety requirements. The team chose to compete in the electric category of the 2012 FHSAE competition. After getting feedback from previous car performance and researching different powertrain options, the senior project team arrived at three conceptual ideas. Using a quality function deployment method, the senior project team chose the concept where two motors independently …

Wireless Solar-Powered Thermal Imaging Camera, Andy Bonk, Billy Mcvicker, Jacob Richardson

Mechanical Engineering

Creation of a mounted wireless self-powered thermal imaging camera system.

Pop-A-Wheelie Design Team, Mackenzie Hill, Thuyen Nguyen, Shaun Van't Hul

Mechanical Engineering

The purpose of this report is to illustrate the Pop-a-Wheelie design team’s progression and implementation of a concept in regards to the project sponsored by Break the Barriers (BTB). The Pop-a-Wheelie design team was tasked to design two devices that will be attached onto wheelchairs. The devices should facilitate the independence of user’s ability to pop-a-wheelie and return to an upright position without any assistance. After a list of specifications was agreed upon, the design process initiated. All customer specifications are listed in Objectives section located in Chapter 1: Introduction. A complete engineering specification table can be found in the …

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

A Shock Tube Technique For Blast Wave Simulation And Studies Of Flow Structure Interactions In Shock Tube Blast Experiments, Nicholas N. Kleinschmit

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Improvised explosive devices (IED’s) are widely used against US and allied forces fighting in Iraq and Afghanistan. Exposure to IED blast may cause blast-induced traumatic brain injury (bTBI). The injury mechanisms are however not well understood. A critical need in bTBI-related research is the ability to replicate the loading conditions of IED blast waves in a laboratory environment. In this work, experimental studies have been carried out to explore the use of the shock tube technique for generating air shock waves that mimic the temporal and spatial characteristics of free-field blast waves and to investigate the blast wave-test sample interactions …

Self Assembly In Additive Manufacturing: Opportunities And Obstacles, Nathan B. Crane, J. Tuckerman, G. N. Nielson

Faculty Publications

Purpose

Additive manufacturing offers substantial flexibility in shape, but much less flexibility in materials and functionality—particularly at small size scales. A system for automatically incorporating microscale components would enable the fabrication of objects with more functionality. This paper considers the potential of self assembly to serve as an automated programmable integration method. In particular, it addresses the ability of random self assembly processes to successfully assemble objects with high performance despite the possibility of assembly errors.

Methodology

A self-assembled thermoelectric system is taken as a sample system. The performance expectations for these systems are then predicted using modified one-dimensional models …

Asme Human Powered Vehicle, Benjamin Knaus, Philip Basmadjian, Nick Supat

Mechanical Engineering

Speed Solutions has been contracted to design and build a Human Powered Vehicle (HPV) frame and drivetrain for the Cal Poly HPV club to use in their 2011 race season. This project is being funded by the Cal Poly HPV club and their sponsors. The goal is to design, test and build a bicycle frame that the HPV club can attach to a fairing of their design. Primary design considerations will include speed, weight, cost, rider ergonomics, reliability and ease of repair. This vehicle will be used to compete in ASME’s Human Powered Vehicle Challenge (HPVC) series of races.

Sae Baja: Final Drive Gearbox, Michael Mccausland, Michael Watkins, Ian Masterson, Andrew Sommer

Mechanical Engineering

This paper presents the results of a manual transmission project for SAE Baja. A full engineering process is documented, including problem definition, scheduling, conceptualization, decision theory, synthesis, analysis, manufacturing, and testing. A comparison is made between existing and potential mechanical power train solutions. The final design is analyzed in dynamic simulations, AGMA stress, predicted FFT spectrums, and shifting rod buckling. A number of complicated parts are manufactured through investment casting and direct CNC machining. Issues in the final assembly have prevented the project from being fully realized, recommendations are made for future SAE Baja teams.

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Supermileage Team - Urban Concept Competition Vehicle Chassis Design Report, Andrew Allport, Kevin Braico, Kevin Charles, George Kyi, William Lai

Mechanical Engineering

This research and design project was proposed by the Cal Poly Supermileage team. They have requested for our team to design an Urban Concept car, a new category of vehicles to compete for fuel efficiency in the Shell Eco-marathon in 2010. The primary focus of our team is in the design and construction of a chassis the Supermileage team can use for the 2010 competition in Fontana, CA. This design must meet dimensional and functional requirements set by Shell while being designed to maximize efficiency in the competition.

There were various chassis concepts under consideration that would possibly work for …

Design, Construction And Evaluation Of A Multi Layered Solar Distillation Prototype, Arlen A. Flanagan

BioResource and Agricultural Engineering

Water is arguably the most important resource to any individual; especially in areas of deserts and open oceans where drinkable water suppliers are scarce. The prototype Solar Desalination Unit allows normally undrinkable water to be distilled into a potable source with minimal inputs. The unit’s main power source is focused sunlight to thermally heat water inducing evaporation which is then condensed and collected. While solar desalination has been around for many years, lately more complex designs have been investigated in order to increase yields and efficiency. This paper focuses on the design, construction and testing of a Multi-Plate Solar Desalination …

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee

Faculty Publications

No abstract provided.