Manufacturing Commons^™

Reinforced Scan: A Reinforcement Learning Enabled Optimal Laser Scan Path Planning In Laser Powder Bed Fusion Additive Manufacturing, Chaoran Dou, Jihoon Chung, Raghav Gnanasambandam, Yuhao Wu, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive Manufacturing is an innovative technology that fabricates parts layer by layer. However, in Laser Powder Bed Fusion (LPBF), printed metal parts often exhibit residual stresses, deformations, and other defects due to non-uniform temperature distribution during the printing process. To mitigate these issues, an optimized scan sequence within each layer can improve thermal uniformity. Traditional optimization methods, which rely on domain knowledge and employ trial-and-error or heuristic approaches, often fail to achieve optimal solutions due to the complex nature of the problem. One major challenge in improving scan strategies lies in the vast search space required to optimize the scan …

Harnessing Ml And Iiot For Traceability In Continuous Production Systems: A Conceptual Framework, Kholoud M. Abdelaal

Theses and Dissertations

In the era of rapid technological advancement, the manufacturing sector faces increasing pressure to leverage emerging technologies to enhance operational efficiency and minimize waste. In this context, traceability plays a pivotal role, as it provides complete visibility of processes and products throughout manufacturing systems, enabling them to identify areas for improvement and take corrective actions accordingly. Additionally, traceability ensures compliance, supports product recalls, provides a clear understanding of the system’s performance, and enables fact-driven decision-making in multiple aspects of the manufacturing system. Although the broad spectrum of traceability applications in batch production-based plants, traceability remains challenging to achieve in continuous …

Nissan Leaf Disassembly Tool And Test Stand Design, Mariah Z. Hodge

Williams Honors College, Honors Research Projects

The Akron Engineering Tribology Laboratory has developed a water-based lubricant and aims to test and observe if the water-based lubricant could work in an electric vehicle environment. As parameters for creating a test stand to mimic an electric motor environment are not readily available online, the goal of this senior design project is to take apart a used Nissan Leaf engine to define the parameters a test stand must meet to accurately recreate an electric motor environment. Knowing these parameters, a test stand will then be designed for testing the water-based lubricants. The purpose of building a test stand to …

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Vibration-Based Fault Diagnosis In Industrial Rotating Machinery, Yaman Pandey

All Graduate Theses, Dissertations, and Other Capstone Projects

Unplanned downtime caused by rotating machines results in a significant percentage of the total downtime in manufacturing plants. These downtimes cause significant loss of production time. While preventative maintenance helps minimize lot of these downtimes, it can’t predict the upcoming downtimes and prevent them from occurring. That gave birth to predictive maintenance. While various techniques are used for predictive maintenance, vibration analysis is one of them. In this study, data driven and expert validated diagnosis using vibration analysis for rotary machinery is used. The data is collected from a manufacturing site in Minnesota where 32 rotating assets, including motors and …

Corrigendum To “3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing”(Additive Manufacturing, (2026), 127, C, (105308), (S2214860426002344), 10.1016/J.Addma.2026.105308), Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The author regret about the correction in the Equation B(1) in original article. The corrected version of the Equation B(1) is given below,(1.1)∂uxxx,ξ∂x=116πμ1−ν4ν−1x−ξxR3−3x−ξx3R5−8ν−5x−ξxR13+34ν−3x−ξx3R15−18x−ξxzξzR15+30x−ξx3zξzR17−12ν−12ν−1x−ξxR1R1+z+ξz2+4ν−12ν−1x−ξx3R13R1+z+ξz2+8ν−12ν−1x−ξx3R12R1+z+ξz3 The authors would like to apologise for any inconvenience caused. DOI of original article: < 10.1016/j.addma.2026.105308>

Mechanical Behavior Of Additively Manufactured Ti-6al-4v Eli Parts: Effects Of Laser Parameter Selection, Samuel Lopez

UNF Graduate Theses and Dissertations

Additive manufacturing (AM) of TI-6AL‑4V Extra‑Low Interstitial (ELI) enables complex geometries for fatigue‑critical medical device applications, yet fatigue performance remains sensitive to process‑induced defects. This work investigates the effect of laser process parameter selection on the microstructure, mechanical properties, and fatigue behavior of TI- 6AL‑4V ELI fabricated via laser powder bed fusion (L‑PBF) using a Renishaw RenAM system. The influence of laser parameters was isolated by holding powder chemistry, build orientation, scan strategy, sub‑transus annealing, and post‑processing constant between a non‑optimized baseline and an optimized parameter set selected based on tensile performance.

Optical microscopy showed the optimized condition exhibited improved …

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely

Materials Science and Engineering Faculty Research & Creative Works

All-d-metal Heusler alloys are emerging functional materials in which magnetic ordering, lattice distortion, and mechanical behavior are strongly coupled through d–d electronic interactions. This study systematically investigates the structural, thermal, magnetic, and mechanical properties of Mn₂FeCu synthesized within a Heusler-type compositional framework. SEM/EDS revealed a dual-phase FCC-based microstructure consisting of Mn–Fe–rich and Mn–Cu–rich domains, while XRD confirmed FCC symmetry with compositional partitioning rather than full L2₁ ordering. Differential scanning calorimetry identified partial melting of the Cu-rich phase near ~ 900 °C. Dilatometry showed a thermoelastic FCC → FCT transformation at ~ 770–780 °C with a recoverable strain of ~ 0.067%. …

Field-Assisted Post-Processing Of Cold-Sprayed Pure Copper, Alan Hensley

Theses and Dissertations--Mechanical and Aerospace Engineering

The properties of materials processed through cold spray, and many other AM processes, are non-uniform and unpredictable. In most cases, post-processing is required to achieve desired properties and better uniformity. In cold spray, the typical method is an annealing heat treatment (AHT), which can improve bond strength, reduce porosity, and restore ductility, among other effects. AHT alone, however, is unable to completely remedy any of the unfavorable properties. In addition, long treatments at high temperatures are often needed for satisfactory results. This increases energy consumption and extends production times for products made by the process. For these reasons, numerous investigations …

Process-Guided Learning Via Data-Driven Modeling And Controller Synthesis, Benton Clark

Theses and Dissertations--Mechanical and Aerospace Engineering

This work introduces process-guided learning, a framework in which process characteristics and learning algorithms are combined in the modeling process of engineering applications with the aim of uniting traditional and data-driven modeling and control techniques. Traditional engineering methods using simplified analytic models fail to capture the increasing complexities of engineering problems with sufficient accuracy to achieve modern requirements. More advanced modeling and control techniques using high-fidelity models often produce a computational burden that is infeasible for real-time solutions. Data-driven modeling offers a simple and flexible algorithm for producing real-time capable, high-fidelity models, but naive implementations lack the physical constraints of …

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of M_F=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Parts, Logan Trimmer

Harrisburg University Other Works

Presentation covering the broad strokes of the project. The goal was to prove the viability of hybrid/additive manufacturing for high stress automotive applications. This project focused on recreating a piston from an old engine to examine if hybrid manufacturing could be used for such applications. On a small scale, hybrid manufacturing was able to be more cost effective if the costs of the equipment and electricity were ignored. The decision to ignore those costs came from the inability to find accurate prices for industrial casting.

Effect Of Complex Alloying Elements On Oxide Scale Formation And Water-Jet Descaling Performance On Continuously Cast Low-Carbon Steels, Tochukwu P. Ojiako, Tsvetkov Dmitry, Mario Buchely, Haiming Wen, Simon N. Lekakh, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

The formation and evolution of oxide scale in contact with mold flux during continuous casting, subsequent reheating, and hydraulic descaling are strongly governed by steel chemistry. To elucidate the effect of complex alloying elements (Si, Mn, and Cr), two industrially produced continuously cast low-carbon steel grades for manufacturing stamped parts (a base and alloyed steel grade) were investigated. The objective was to determine how alloying elements influence oxidation behavior, scale morphology, interfacial adhesion, and water-jet descaling efficiency. Continuously cast slab specimens were subjected to controlled thermal and atmospheric oxidation cycles simulating multistage industrial practice. Three initial surface conditions (industrial as-cast, …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

Evaluation Of The Long-Term Sealability Performance Of Aramid Fiber Nitrile-Based Gaskets, Salome Ramirez

Honors Undergraduate Theses

The reliability of sealed, oil-filled containers is critical for maintaining the operation of high-voltage energy systems, in which the sensitive electronics need to be isolated from the cyclic conditions associated with outdoor environments. New materials bring the possibility of extending service lifetimes and maintenance intervals. Aramid fiber nitrile-based gaskets are an attractive alternative to conventional gasket choices due to their long-term stability in various environments and compatibility with porcelain, metals, and plastics. For newly designed porcelain-to-metal fittings, understanding the behavior of the candidate gasket material under realistic loading conditions is essential to ensure long-term seal integrity and equipment safety. Traditional …

Robotizing Complex Welding Processes Through Imitation Learning And Generative Models From Human Demonstration, Yue Cao

Theses and Dissertations--Electrical and Computer Engineering

Arc welding processes demand real-time adaptive control that current robotic systems cannot achieve autonomously. This dissertation develops a systematic framework to robotize complex welding by learning from human demonstration, integrating generative modeling, physics-informed reconstruction, and model-based imitation learning. First, human--robot collaboration systems are established for both Gas Tungsten Arc Welding (GTAW) and Double-Electrode Gas Metal Arc Welding, combining robotic teleoperation with virtual reality interfaces to capture high-quality operator demonstrations. Second, a physics-informed neural network framework reconstructs complete molten pool flow fields from high-speed imaging, enriching process understanding beyond direct sensor observation. Third, generative models, including a hybrid latent variational autoencoder …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Components, Logan Trimmer

Harrisburg University Other Works

The goal of this research was to establish the viability of using hybrid manufacturing for automotive applications. By verifying that high-stress components can be created, it can be assumed that any other lower stress part could be made to match the strength requirements. A limiting factor of adoption for hybrid manufacturing is how new the technology is. Studies on time and cost were performed allowing for comparisons with traditional manufacturing technologies (casting, forging, milling) used in automotive applications. This research utilized a Haas Automation UMC750 5-axis CNC mill with a Meltio laser wire direct energy deposition attachment. Fusion 360 was …

Modeling Of Transformation Temperatures In Cast Martensitic Stainless Steels-Ca6nm: Effects Of Composition, Heating Rate, And Grain Size, Ugochukwu Agbedo, Mario Buchely, Laura Bartlett, Caelan Kennedy

Materials Science and Engineering Faculty Research & Creative Works

Accurate prediction of the critical transformation temperatures Ac1 and Ac3 is one of the essential factors in the heat treatment of CA6NM cast martensitic stainless steel. In this study, the influence of alloy composition, heating rate, and prior austenite grain size on the critical temperatures was quantified using dilatometric measurements and statistical modeling. Six heat treatment conditions produced prior austenite grain sizes ranging from ~75 to 247 µm. Experimental results showed that grain size variations produced only minor changes in Ac1 and Ac3, indicating a weak dependence of transformation temperatures on prior austenite grain size within the investigated range. In …

Multiphysics Simulation And Experimental Validation Of Phase Transformation And Hardness In Jominy End-Quenched Low-Alloy Steels, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. A. Athavale, A. Kumar

Materials Science and Engineering Faculty Research & Creative Works

High-volume industrial continuous hot-rolled steel heat treatment processes involve sophisticated multi-phase modeling. The performance of a given process can be optimized by coupling phase transformation kinetics with the cooling conditions of the process. This study develops a multiphysics model to simulate an intensive quenching process for steel, which is inherently transient and highly dependent on numerous parameters. The simulated object was a Jominy end-quenched specimen geometry using two commercial steels, AISI 4130 and AISI 4140, with the goal of transferring a verified methodology to the heat treatment process for industrial heavy-section products (bars, slabs). The simulation employs thermal, mechanical, and …

Effect Of Wall Movement On Porosity Formation In Ductile Iron Castings Under Varying Processing Parameters, Shamsul Alam

College of Graduate Studies: Theses & Dissertations

Shrinkage porosity is a major defect that significantly impairs the mechanical properties and overall performance of ductile iron castings. Although graphite formation during solidification induces volumetric expansion, this expansion alone is insufficient to fully compensate for the shrinkage occurring throughout solidification. During the solidification and cooling of ductile iron, multiple phase transformations occur, resulting in dynamic volume changes that exert pressure on mold walls and internal cavities. These pressures can deform mold walls and casting surfaces, leading to defects such as swell and porosity, while also influencing shrinkage formation. This study aims to analyze the mechanisms of porosity formation and …

Critical Parameters Controlling Oxide Scale Formation And Hydro-Descaling Efficiency During Steelmaking, Tochukwu Princewill Ojiako

Doctoral Dissertations

In modern steelmaking, cast slabs are exposed to high-temperature oxidizing environments during secondary cooling, reheating, and hot rolling, resulting in the formation of multilayer oxide scales on the steel surface. These scales interact with mold-flux residues originating from the casting process (CC). The morphology, chemistry, and adhesion of oxide scale strongly influence its removability during high-pressure hydraulic descaling and ultimately determine the surface quality of hot-rolled products. However, the mechanistic relationship between oxide scale evolution, scale-steel interfacial structure, and hydraulic descaling performance remains poorly understood.

This dissertation investigates oxide scale formation, modification, and removal in low-carbon thin-slab steels produced by …

Design For Extrusion-Based Additive Manufacturing: Generation Of Guidelines For Ceramics With Comparison To Thermoplastics, Hollis Hervey Waites

Masters Theses

"Design for Additive Manufacturing (DfAM) has made much progress for polymer material extrusion processes (MEX-P), like Fused Deposition Modeling (FDM), but very little progress for ceramic MEX processes (MEX-C) like Direct Ink Writing (DIW). This thesis leverages MEX-P design guidelines to create an initial set of design guidelines for DIW. FDM and DIW processes and material properties are compared, and the effect of these factors on the differences in rules is discussed. Five design guidelines are identified as applying to all MEX. For three of these, an exact limit for DIW of alumina is studied: minimum corner radius in the …

Overcoming Resolution Vs. Throughput Trade-Offs In Ceramic Material Extrusion Additive Manufacturing Via Viscoelastic Filament Stretching, Abid H. Rafi, David W. Lipke, Jeremy L. Watts, Gregory E. Hilmas, Ming C. Leu

Materials Science and Engineering Faculty Research & Creative Works

Fabricating large, monolithic ceramic parts using material-extrusion additive manufacturing remains challenging due to difficulty maintaining uniform moisture content during printing, which can lead to drying-induced defects such as warping and cracking, especially as part size and print time increase. Fabricated parts have trade-offs among print resolution, high throughput, and structural fidelity. Our study has shown that increasing the ratio of nozzle traverse speed vs. material extrusion speed increases filament stretching in viscoelastic ceramic paste, helping to overcome the trade-offs between resolution and throughput. Using aqueous ZrB2–SiC (70/30 vol.%) as a representative ultra-high temperature ceramic paste, rheological characterisation revealed viscoelastic yield-stress …

Castrip Process Technology: Non-Grain Oriented (Ngo) Si Steels Extension And Carbide-Free Bainitic (Cfb) For Flat Products, Naram Naidu Meesala

Masters Theses

"This research explores the development of advanced steel grades manufactured through Castrip® twin-roll thin strip casting technology, with particular attention to non-grain-oriented electrical Si-Steels (NGOES) and carbide-free bainitic (CFB) steels. The Castrip® process offers a near-net-shape route for producing thin steel strips, which greatly decreases the number of processing stages, lowers energy demand, and reduces carbon dioxide emissions when compared with traditional steel production methods.

In the NGOES part of the study, several industrial Fe–Si steel compositions were cold rolled to final thicknesses ranging from 0.35 mm to 0.15 mm. These materials were then exposed to short-duration continuous annealing at …

Fused Filament Fabrication Additive Manufacturing Of 17-4 Ph Stainless Steel: Process–Structure–Property Relationships In Magnetic Materials, Maanav Patel

Theses and Dissertations

Additive manufacturing (AM) enables the fabrication of complex metallic components through layer-by-layer processing directly from digital models. Among AM techniques, material extrusion–based processes such as fused filament fabrication (FFF) provide an accessible method for producing metal parts using filament feedstocks composed of metal powders and polymer binders. When applied to precipitation-hardening stainless steels such as 17-4 PH, the processing route and heat treatments can influence the resulting microstructure and functional properties. This work investigates the magnetic behavior of 17-4 PH stainless steel fabricated using FFF and evaluates how heat treatment conditions influence measured magnetic properties. Samples were produced and analyzed …