Manufacturing Commons^™

Modeling Of Selective Laser Sintering/ Selective Laser Melting, Xuan Wang, Connor West

Industrial and Manufacturing Engineering

Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Modeling is a powerful tool to enable faster development cycle by significantly reducing the experimental efforts. In this paper we discussed the current status of selective laser sintering/melting modeling, in which the laser and powder interaction was studied to understand and predict the process and …

Design And Implementation Of A Fixture For Robotic Welding, Isaac Nathaniel Williams

Industrial and Manufacturing Engineering

The Cal Poly IME department recently purchased a robotic welder. The faculty would like to see this robot incorporated into the welding class. The robot was capable of moving, but was not able to perform a weld prior to this project. This problem is addressed by creating a demonstration part for the welding class. The objectives that need to be complete for this to be possible is designing a part, designing a fixture, analyzing the cost of robotic welding, and implement welding the part in the class. The part is designed with specific requirements in mind. The fixture is designed …

Application Of Gearbox Drivetrains For Commuting Bicycles, Loren Sunding

Industrial and Manufacturing Engineering

People all over the world are beginning to ride their bicycles more often to destinations which include work, school, and local markets. Most bicycles being used for these activities have an external drivetrain exposed to the elements of the road including water, mud, dirt, and debris. External drivetrains are very fragile and when damaged, pedaling efficiency is greatly reduced and the overall riding experience diminishes.

One solution to this issue is a gearbox specifically designed for a bicycle frame. A gearbox has several mechanical mechanisms operating inside a protective housing. Since the housing is fully sealed, outside elements are not …

Assembly Line Kitting: Foam Mold Material Substitute, Samer Samy Saleh

Industrial and Manufacturing Engineering

Kitting is considered an incredibly innovative and effective solution intended to aid operators within a mixed model assembly line. However, it is a non-value added procedure and one that customers may not be willing to pay for. With this project, the goal is to examine opportunities to employ lean principles and provide a solution that further eliminates non-value added procedures, while also producing the potential for a flexible, mixed model assembly line.

To achieve the aforementioned purpose, the production of foam molds, located within industrial totes and sent to the assembly line, was found to be a major waste within …

Mri Upgrades At Radiology Associates, Patrick Cheung, Charlene Donlon

Industrial and Manufacturing Engineering

Problem Statement: The MRI machines at Radiology Associates are limiting the company’s ability to expand and compete within the local market. After discussing with technicians and managers at Radiology Associates, we decided to focus on hardware and software upgrades for the MRI machines. With 2 of the 3 locations purchasing new machines in the near future, our focus was on upgrades at the Santa Maria facility. The two machines at this location needed hardware and/or software upgrades to remain on par competitively both within the company and with local scanning options. Flexible coils are beneficial in terms of size, weight, …

Development Of A Process Monitoring Tool For The Manufacturing Process Of An Electric Vehicle Battery Enclosure, Ian Lamond

Industrial and Manufacturing Engineering

High volume manufacturing requires process control that is responsive to manufacturing related issues. It is critical that tools and resources are implemented that gauge manufacturing performance and identify root cause issues.

This project focuses on the design and manufacturing process of an electric vehicle aluminum battery enclosure and the implementation of a production measurement system. The current problem is a lack of process control communication and out of control alarms when uncontrolled events occur for manufacturing associates at the battery enclosure manufacturing work station.

This report examines the core principles of Quality Engineering, the economic advantages of implementing a vision …

Design And Prototyping Of An Adjustable Putter, Daulton Morgan

Industrial and Manufacturing Engineering

Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.

This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …

Automated Machine Tender, Ryan A. Canfield, Samuel N. Adler, Louis S. Roseguo

Mechanical Engineering

The use of CNC (Computerized Numerical Control) machines automate production in factories through programs controlling manual operations such as milling or lathing. The manufacturing process can be automated beyond the use of CNC machines through the addition of a robotic tender capable of carrying out the same tasks as a human operator. A tender can be integrated into the CNC machine itself, or purchased separately and configured to autonomously operate a particular machine. Smaller companies making limited production runs may not find it economically feasible to purchase large scale integrated machine tenders, but would benefit from a versatile autonomous machine …

Final Design Report: Polymer Fatigue Characterization Test Method, Wyatt Ayling, Tyler Price, Brandon Stell, Michela Upson

Mechanical Engineering

Polylogix is a team dedicated to the design, build, and testing of a fatigue machine to simulate cyclic loading on a biomedical polymer. This project is sponsored by Endologix, Inc. to provide test data characterizing mechanical material properties of various formulations of polymer used in abdominal aortic aneurysm surgeries. With this project goal, the machine must be able to test the polymer at body conditions; these include a testing temperature of 37°C and a cycling frequency ranging from 1 Hz to 10 Hz. This report proposes the following solution to this design challenge: an AC motor-driven mechanism utilizing a planetary …

Solar Car Suspension System, Alex Power, Adam O'Camb

Mechanical Engineering

No abstract provided.

Final Design Report: Allergen Mixing Assistant (Ama) Micro-Refrigeration Redesigning, Mitchell Parks, Minwoo (Michael) Suh

Mechanical Engineering

Abstract

Allergen Mixing Assistant (AMA) by Xtract Solutions is a device designed to more “effectively refrigerate, organize, and mix allergenic extracts”. Although Xtract Solutions intended the product to be fully automated, the company has decided against its automation and declared its current design as a minimum viable product whose components are too expensive, difficult to source and complex. Therefore, Cal Poly AMA design team - Mitchell Parks and Minwoo Suh - has decided to replace these expensive components with much more economical alternatives as shown below:

Stirling cooler

→

Thermoelectric (Peltier) cooler

Custom Arduino

Controller Card

→

TEC Thermostat *** …

Revolutionized Additive Manufacturing, Matthew Walker, Winthrop Townsend, Luca Fuller

Mechanical Engineering

No abstract provided.

Fiber Glass Mat Splice Automation, Max Weinstein, Charles Scott Forbes, Max Kilpatrick

Mechanical Engineering

Currently, GAF has two operators manually splice together each roll of fiberglass mat. To save money and resources, GAF wants to automate this splicing process. Our team is responsible for stage 3 of 5 in this automation process. We are responsible for ensuring that the system is able to move autonomously to the necessary positions required for splicing together the rolls of fiberglass mat. We have determined the best solution for accomplishing this movement is to use linear slide actuators. This document will describe the process by which we arrived at our solution, the details of our solution, and a …

Compression Molded Composite Component, Greg Hermansen, Larsson Johnson, Joanne Medrano, Kyle Hammell

Mechanical Engineering

The following final design report outlines the design and fabrication of a carbon fiber compression molded sunglasses case. It intends to guide the development of a future lab activity for a composites undergraduate course at Cal Poly – San Luis Obispo. The activity aims to support an educational investigation in "out-of-autoclave" composites manufacturing methods, such as compression molding, which offer some key benefits over autoclave molding. The methodology behind the creation of a conceptual design, an initial prototype, and a final product is laid out in detail below.

Mechanisms And Solutions To The Brittle Solder Joint In Electroless Ni Plating, Xuan Wang, C. Key Chung

Industrial and Manufacturing Engineering

Brittle solder joints in Electroless Ni electroless Pd immersion Au (ENEPIG) surface finishes are one of the key reliability issues in electronics assembly. Previous characterization of the reflow process has indicated that interfacial voids formed after solder reflow are responsible for the decreases in solder joint strength. However, the mechanisms behind the formation of these voids in the ENEPIG process remain unclear. In this paper, the interaction between various aspects of the ENEPIG process and solder joint strength were investigated. Surface roughness, morphology, and nano-pitting at the interface between electroless Pd and Ni-P were characterized. The size and density of …

Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon

Industrial and Manufacturing Engineering

The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …

Gold Contamination In Non-Lead Surface Mount Solder Joints, Richard Alexander Garrison

Industrial and Manufacturing Engineering

Abstract

Solder joints are critical to the reliability of circuit boards. If gold is introduced to the solder joint, brittle AuSn4 intermetallic compounds develop which affect reliability of that solder joint. To determine the effects of gold when dissolved into a non-lead solder joint, a process was developed in order to apply gold content onto SAC305 solder paste. The gold was transferred as a paste from a micropipette onto each individual solder bump. This process was designed to apply a range of gold content from 1.0 wt. % to 10 wt. % to each individual solder joint. The test board …

Improving The Mechanical Performance Of 3d Printed Parts Using Fused Filament Fabrication, Inderpreet Binning

Industrial and Manufacturing Engineering

The 3D printing industry has seen rapid growth in the last 10 years and has been called the next industrial revolution. There are several different processes used in 3D printing, but the most popular process is called Fused Filament Fabrication (FFF) or Fused Deposition Modeling (FDM). This is the process where (most commonly) plastic filament enters a nozzle, is heated to a semi-liquid state, and then deposited into a pattern to create a print. One major drawback to this process is that the prints are anisotropic. This means that the strength of the print varies with the orientation that it …

Design & Analysis Of A Bicycle Towing Device, Austin Lynch, William Max Mcewan, Fredrik Stenson

Industrial and Manufacturing Engineering

A local businessman had the idea to build a device that allows a bicycle to tow another bicycle. He built a prototype to demonstrate his idea but he wanted help in developing a product that could fit more bikes, did not require a rear rack to operate, and be manufacturable at his facility. He also expressed interest in an economic evaluation of production and marketing of the device. An analysis of customer needs led to adding reduction of weight and ease of attachment to the design requirements.

This report is about improving the original design and presents the process of …

Haas Automation Umc750 5axis Mill Assembly Process Improvement, Mason A. Garcia, Gregory R. Gunion, Juan Pablo Quinonez Weston

Industrial and Manufacturing Engineering

The improvement of the current assembly of the motor and casting components for the Haas UMC-750 5-Axis vertical CNC mill includes the evaluation, development and proposal of a new pair of material handling carts. To meet these deliverables, a student team began by assessing the assembly workstation, defining the problem to be solved, researching ergonomics in material handling equipment and drafting the final design of the improved cart models using SolidWorks. The final design considered the initial improvement request from the client, as well as better ergonomic features to enhance the safety of the operators. It was estimated that the …

Mentoring Management Database, Alexandra Cava, Samantha Kin

Industrial and Manufacturing Engineering

A new mentoring program is set to begin next year pairing children from Kindergarten through 12th grade with college students as their mentors. Keeping track of the mentor information, mentee information, pairings, stipend disbursements, interview question results, events, and final assessments by hand would be extremely difficult, therefore, a database would be a great asset to the program.

Creating a database in Microsoft Access allows a user to have all this information in one convenient location, therefore, ensuring there is a good user interface is a key component to this project. Using Perach’s "Guide to the Perplexed" as the base …

E-Learning Design For Microsoft Access & Asp.Net, Jonathan Choi, Christopher Hom

Industrial and Manufacturing Engineering

The problem definition is that the current video tutorial series is outdated and lacks interactive features that aid with E-Learning. The goal of the project is to create a platform that incorporates features such as structure, interaction, assessments, and competency tests. The project revolved around integrating four softwares together in order to create an effective E-Learning platform. The four softwares were Adobe Captivate, Camtasia, Microsoft Access and Microsoft Visual Studios. Adobe Captive is used to store the tutorial video and assign quizzes. Camtasia is used to record the tutorial videos. Microsoft Access is used to store all the questions given …

Smart Packing With Qr - Improving Cal Poly's Parking System For All Users, Kelsey Bazshushtari, Andrew Lee, Christopher Ragasa

Industrial and Manufacturing Engineering

Cal Poly Smart Parking, herein referred to as CPSP QR Code Initiative, is developed to reduce the wait times student, staff, and guest drivers experience when searching for a parking spot on campus. Cal Poly is currently undergoing a large growth in student population, and, as a result, is experiencing congestion in parking lots. Drivers will commonly spend frustrating amounts of time "vulturing" these parking lots for an open spot. CPSP QR Code Initiative consists of a database that is controlled by user submitted data through QR codes scanned on a user’s smartphone. This system will provide drivers with a …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …

Building A Startup Wine Brand, Sean Christopher Silvestre

Industrial and Manufacturing Engineering

Lisso Wine is a company that currently purchases wine from a California winemaker and resells it in China. In order to reach more customers and increase sales, Lisso wants to create their own brand of wine while keeping the winemaker as a supplier. However, they do not have a plan for the marketing, production, or distribution of their new product. This project will be treated as a startup venture by Lisso Wine and designed to be operated by a handful of people with limited resources. Sustainable and cost-effective materials were selected for the product and it’s packaging in order to …

Inventory Tracking Software Improvement Project, Jacky Leung

Industrial and Manufacturing Engineering

FanimeCon’s Convention Operations department required standardized processes and controls for their inventory tracking software. On top of the current web application, new controls were put into place for checkout limitations. To allow for a continuous improvement effort, processes became standardized with a new graphical user interface where user input is recorded. These will provide processing times for further study in proposing redesigned layouts and more efficient processes.

National Society Of Sales Engineers & National Sales Engineering Competition, Joseph Lynes, Tyler Sasse

Industrial and Manufacturing Engineering

Sales Engineering is a popular career choice for many engineers coming out of university. Despite its continuing growth, many students lack the knowledge and preparation to be successful in the early years of their career. A small collection of sales engineering minors and student clubs are the only option for students interested in technical sales.

Using the DMAIC process, the senior project team went step by step to find and implement the best possible solution to better connect college students and the professional sales engineering industry . The team worked side by side with professionals in the industry and students …

Inclusive Lectern, Trent Canales, Sean Day, Dylan Sigley, Stephen Sippel

Mechanical Engineering

A lectern is an essential piece of equipment for almost all speeches and presentations. They come in many forms and range in degree of professionalism depending on the occasion. Lecterns not only hold a presenter’s notes, a microphone, or other presentation aids, they provide a structure for a presenter that can bolster their confidence during a presentation. As such, it is important that all presenters have a lectern available to them. Unfortunately this is not always the case due to lectern accessibility limitations. This problem inspired the Cal Poly Disability Resource Center to request a lectern that satisfies the Least …

Biomimetic Seal Flipper Test Rig, Gordon D. Belyea, Laura Kawashiri, Dylan Rinker, Kurt Beske

Mechanical Engineering

No abstract provided.

Cp Ev Dynamics, Steven Montevideo, Ashlie Reott, L. Carter Price

Mechanical Engineering

No abstract provided.