Process Improvement For Thermal Barrier Coating Masking Applications, Katherine Meezan, Aiden Senn, Saksham Giri, Katelyn Perez

Mechanical Engineering

Solar Turbines, a gas turbine manufacturer, needs a more efficient method to prevent the application of a thermal barrier coating (TBC) to select areas of their combustion liners during manufacturing. Currently, the process is labor, material, and time intensive: reusable masking tools should increase the efficiency of the TBC process.

This project is sponsored in full by Solar Turbines, and is under the guidance and administration of three Solar Turbines engineers: Chris Noone, Rick Rogers, and Carson Roff. The project is mentored by Cal Poly senior design Coach, Rick Lasko. This project will be completed by a team of four …

Stakblocks, Micah Satoshi Inoshita, Ava Rose Doerschlag, Cody J. Ellis, Zach M. Lawton, Fernando M. Nalin, Nicholas Humphrey, Aiden Reed Anderson, Sara Maya Suratkal

Mechanical Engineering

Researchers developing sustainable building materials from agricultural waste need a faster way to prototype and evaluate small-scale samples under controlled temperature and pressure before scaling to production. Sponsored by Professor Pete Schwartz of Cal Poly San Luis Obispo, whose work focuses on sustainable technology for developing communities, this project aims to create a prototype testing device for researchers studying agricultural-waste bricks, with the University of Malawi as a potential future testing partner. The final product is intended to inform improved future designs rather than serve as a production-ready device, ultimately supporting the development of affordable, sustainable building materials for communities …

Niu Fsae Brake Rotor Design & Flywheel-Based Test Stand Development, Cody J. Marko, Austin Coyne, Alexander Boyden

Honors Capstones

This project addresses the need for a reliable and validated brake rotor for the Northern Illinois University Formula SAE vehicle following a prior catastrophic rotor failure within the team. Brake rotors in high-performance applications are subjected to significant thermal and mechanical loads, and inadequate design can lead to failure, posing serious safety risks and limiting vehicle performance. To solve this issue, a new brake rotor was designed alongside a dedicated test stand to both improve braking performance and enable experimental validation. The rotor was evaluated using finite element analysis (FEA), including transient thermal and structural simulations, to predict maximum temperature, …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Components, Logan Trimmer

Harrisburg University Other Works

The goal of this research was to establish the viability of using hybrid manufacturing for automotive applications. By verifying that high-stress components can be created, it can be assumed that any other lower stress part could be made to match the strength requirements. A limiting factor of adoption for hybrid manufacturing is how new the technology is. Studies on time and cost were performed allowing for comparisons with traditional manufacturing technologies (casting, forging, milling) used in automotive applications. This research utilized a Haas Automation UMC750 5-axis CNC mill with a Meltio laser wire direct energy deposition attachment. Fusion 360 was …

Design And Development Of Evacuated Photovoltaic-Thermal Systems For Efficient Cogeneration Of Heat And Electricity, Behnam Roshanzadeh

Mechanical Engineering ETDs

In conventional PV systems, most of the solar energy is dissipated into the environment as heat. Accordingly, hybrid Photovoltaic-thermal systems have been developed to utilize the waste heat from PV cells for various thermal applications. However, most PVT systems suffer from low thermal performance compared to solar thermal collectors, as the absorber plate in PVT systems is partially or fully covered by PV cells. This dissertation focuses on improving the thermal performance of PVT systems by introducing the evacuated PVT systems.

An evacuated-tube PVT system was designed and simulated for domestic hot water supply. The evacuated-tube PVT system demonstrated 40% …

Combustion Liner Optimization, William Weeks, Daniel Reed, Isaac Trull

Mechanical Engineering

Solar Turbines provides gas power generation solutions, focusing on gas turbine engines and compressors. The Gas Turbine Products Engineering (GTPE) team at Solar Turbines needs a way to efficiently and cost-effectively maintain the combustion liner of the Taurus model gas turbine at or below the cold-side temperature target. The current system involves a manufacturing process with ergonomic concerns and uncertain cooling effectiveness.

To address this, our team proposed a new combustion liner system featuring impingement cooling. We provided Solar Turbines with heat transfer models of both the existing and proposed designs, demonstrating improved cooling performance. Additionally, a prototype of the …

Experimental And Numerical Modelling-Based Optimization Of Additive Manufacturing Processes, Vishnu V. Ganesan

Mechanical and Aerospace Engineering Dissertations - Archive

ABSTRACT

Experimental and Numerical Modeling-Based Optimization of Additive Manufacturing Processes

Vishnu V Ganesan, Ph.D.

The University of Texas at Arlington, 2025

Supervising Professor: Dr. Ankur Jain

Experimental and numerical modeling play a pivotal role in advancing additive manufacturing technologies by enabling a deeper understanding of complex, multi-physics processes that govern part quality, performance, and reliability. These manufacturing techniques—ranging from Powder Bed Fusion (PBF) and Material Extrusion (MEX) to Automated Fiber Placement (AFP)—involve tightly coupled thermal, mechanical, and material phenomena that are challenging to capture through empirical observation alone. Experimental methods offer critical validation and insights into real-world behavior, while numerical …

Akronauts Turbopump Research Project, Gerald Drabeck Iii, Michael Mccalla, Joshua Skelton

Williams Honors College, Honors Research Projects

The idea of this project is to design a turbo pump template capable of fitting into future Akronauts rocket designs. This allows the rockets to travel higher due to the reduced net weight. Many methods were used to verify the rigidity and feasibility of the design, such as Finite Element Analysis and fluid dynamics simulations.

Design And Development Of A Rapid Tensile Quench Rig, Tyler Jewell, Justin Naylor

Williams Honors College, Honors Research Projects

This report outlines the design process and implantation of a tensile quenching rig that incorporated forced convection and a frequency generator. When any metal is quenched, a vapor barrier forms around it. When this happens, it limits the heat flux that may occur until the barrier turns into just nucleate boiling. The vapor barrier acts as an insulator and causes the heat flux to fluctuate, causing uneven hardening which would limit the use of some materials. To combat this effect, we are trying to use forced convection, and something new, which is adding high frequency waves into the quenching process. …

Fabrication And Characterization Of Cast Copper Heatsinks For Computer Chip Cooling, John James Recktenwald

Graduate Theses, Dissertations, and Problem Reports (ETD)

Humanity has worked copper for millennia, from primitive tools in prehistory to the wires and cooling solutions facilitating the modern digital age. While high performance fin style heatsinks are commonplace, more complex heatsink geometries in high performance applications are rare due to manufacturing challenges. In this study a casting process was developed to fabricate copper pin fin heatsinks. To assess the performance of heatsinks fabricated using the process three pin fin heatsinks were fabricated, one machined from a commercially manufactured billet, one machined from a cast block, and one cast directly to final shape. Each of the three heatsinks were …

Development Of A Manifold Microchannel Heat Sink For The Electrification Of Aircraft, Joshua Mora Sanchez

Mechanical Engineering Undergraduate Honors Theses

The miniaturization of microprocessors and power electronics is leading to critical thermal management challenges. For instance, the heat flux generated in modern computer chips is at the order of 100W/cm², which is well beyond the limit of air cooling. This high heat generation can cause a variety of thermal or mechanical failures in electronic devices. As such, there is a pressing need to devise effective cooling strategies for these microelectronic devices. Liquid cooling with microchannel heat sinks is a promising technology for high power loads. Nevertheless, traditional heat sinks with straight microchannels suffer from two critical challenges: high pressure drop …

Fabrication And Performance Of Scalable Bio-Engineered Porous Layers For Efficient Co2 Capture, Mary Sharon Rose Bondugula

Theses and Dissertations

This dissertation addresses the critical challenge of mitigating climate change by advancing CO2 capture technologies. As global CO2 emissions continue to rise, effective methods for capturing and separating CO2 from industrial processes are essential to combat climate change. Existing CO2 capture systems, such as Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA), often rely on packed bed designs that face limitations, including poor heat and mass transfer, slow gas diffusion, and low thermal conductivity, reducing their efficiency. To overcome these challenges, this dissertation explores innovative solutions by developing advanced adsorbent coatings and scalable bed configurations.

This research begins by …

Focused Led Sintering, Dylan Defazio, Nilav Maulik, Branden Majors, Michael Fontillas

Mechanical Engineering

This report provides a detailed overview of the final design of our light-emitting diode (LED) focusing system. Our system incorporates a converging lens and a specially designed "glass funnel," which acts as a thick fiber optic that narrows the light to a fine point through internal reflection. The glass components of our system are precisely housed in a part made using advanced computer-numeric controlled (CNC) Mill and CNC Lathe manufacturing processes. This ensures high precision and durability of the overall system. Our LED focusing system is designed with a 60-watt stage light. The decision to use a glass funnel as …

Synthesis Of Durable Zeolite 13x Insertion Coatings And Scaled-Up Experimental Demonstration For Co2 Capture, Daniel Jamil Hocheimy

Theses and Dissertations

Minimizing the energy requirement for capturing carbon dioxide (CO₂) from post-combustion sources is critical to efficient industrial decarbonization and subsequent mitigation of the effects of climate change. The current portfolio of CO₂ capture technologies includes absorption, membrane separation and packed bed adsorption, which suffer from high energy and temperature requirements, scalability, and location dependency issues. Adsorption-based systems could cater to these concerns; however, their current embodiments primarily use packed adsorbent bed design and electricity-driven vacuum pumps to regenerate them. While simple and easy to fabricate, these designs are not scalable and cannot use heat to regenerate them …

Liquid Nitrogen Shrink-Fitting Process, Natalie Harvey

The Journal of Purdue Undergraduate Research

No abstract provided.

Thermal Resistance Characterization Of High-Voltage Sic Power Module, Landon Lemmons

Mechanical Engineering Undergraduate Honors Theses

Researchers within the University of Arkansas Electrical Engineering Research Department have embarked on a project aimed at enhancing the thermal performance of high-voltage power modules. To aid in the progress of this project, the design, and development of a thermal tester device are needed. The primary objective of this device is to determine the various thermal properties of high-voltage power modules that the electrical engineering department has developed. Additionally, the project aims to facilitate electrical loading tests on power modules and provide researchers with the means to calibrate the power module in terms of thermal load. This project also possesses …

Thermal Transport And Physical Characteristics Of Silver-Reinforced Biodegradable Nanolubricant, Jaime Taha-Tijerina, Karla Aviña, Nicolás Antonio Ulloa-Castillo, Dulce Viridiana Melo-Maximo

Informatics and Engineering Systems Faculty Publications

In this investigation, the thermal transport behavior of biodegradable lubricant reinforced with silver nanostructures (AgNs) at various filler fractions of 0.01, 0.05, 0.10, and 0.20 weight percent was evaluated over a temperature scan analysis, ranging from room temperature up to 60 °C. The experimental results revealed significant gradual enhancements in thermal conductivity as AgNs concentration and evaluating temperatures were increased. These improvements showed the important role of nanostructures’ interaction within the biodegradable lubricant. The thermal conductivity performance improved for nanolubricants ranging from 6.5% at 30 °C and 0.20 wt.% AgNs content up to a maximum 32.2%, which was obtained at …

Pla-S-Tech: Pla Sustainable Technology, Sean Sapper, Ryan Decarlo, Elle Whitney, Samantha Dombrowski, Dalton Prokop, Dominic Zaio, Tyler Stokes, David Deese, Blake Hengel, Yi Guo

Mechanical and Civil Engineering Student Publications

To recycle waste material produced by fused deposition modeling (FDM) 3D printers, a recycler was designed and manufactured to convert plastic scraps into usable filament. The device does so by breaking down plastic material to a uniform size with the shredder, melting and compressing these pieces into a cylindrical strand with the extruder, and wrapping this strand around a filament spool with the spooler. As the device is mostly made from commercially-available components, it is easily maintainable and user-serviceable, while also costing less than similar devices on the market.

Portable Drinking Water Cooler And Dispenser, Gustavo Hernandez-Lerena, Erik Torres, Caleb Francis Parham, Terry Leung

Mechanical Engineering

This document serves as the comprehensive report for the testing and building for the Portable Water-Cooling System by team AquaCool. Team AquaCool is comprised of four mechanical engineers with a passion to help the agricultural industry in their efforts to keep the health of the workers at their peak. The four engineers who partook in helping the farm workers are as follows: Caleb F. Parham, Erik Torres, Gustavo Hernandez-Lerena, and Terry Leung. To reduce the risk of heatstroke and other unwanted effects from the harsh working conditions during summer, a small and portable system was built to help in the …

Jack And Alex Rc-Baja, Alex Vornbrock

All Undergraduate Projects

Teams of two mechanical engineering students were tasked with the construction of an RC Baja car qualified by the rules and regulations of the Baja competition as well as specifications set by the individual team member for their portion of the vehicle. This proposal focuses on the Chassis and Drivetrain of the vehicle while team member Jack Stutz oversaw the steering and suspension. Teams will compete against each other in various modes to determine the best vehicles of the competitors. The chassis was made of standard aluminum, the remaining parts made by the students were made with PLA; both materials …

Distillery, Clare Nicholas, Patrick Hanlon

Williams Honors College, Honors Research Projects

The goal for this project is to make a cost effective still. We will be implementing cost saving parts to create a cheap but effective still. From initial research conducted, we will try to combine a stainless steel still and copper still together so that the cheaper material (stainless steel) and the component that removes sulfur compounds (copper) are both implemented. The ME side of the project will focus on the actual design and construction of the parts that will be implemented into the still. Included in the design process will be calculations of heat transfer for the current and …

Biomass Characterization And Insulation Optimization Studies, Hussein Awad Kurdi Saad

Doctoral Dissertations and Master's Theses

This study indicates how biomass materials can be effectively used as naturally sustainable alternatives to insulation materials. Barley grains and oak leaves, straw, and jute are collected, and crushed into powders/ chopped pieces. The physical characteristics are measured to characterize each powder. The biomass powder reinforced composites are manufactured in varying weight ratios. The density and thermal conductivity of composite materials are measured. The properties of composites compared to those of commercial insulation materials are found to be close to them. Furthermore, genetic algorithms (GA) can be used to achieve multi-objective optimization entailing maximizing insulation (minimizing heat transfer) and simultaneously …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Triggering Thermal Runaway In Lithium-Ion Batteries, Chris John

Honors Scholar Theses

The proliferation of lithium-ion batteries enables electric devices such as cell phones to electric vehicles to become a reality. A latent danger, however, exists in these batteries. Mechanical, thermal, or electrical damage can initiate a phenomenon known as thermal runaway (TR). This damage causes internal short circuits within the battery, releasing heat and triggering exothermic decomposition reactions. The battery will catch fire if rapid cooling is not present. While experimental designs exist for evaluating TR, significant safety hazards and impracticality may impede testing efforts. Finite element analysis, therefore, becomes a vital tool in modeling TR and mitigation techniques. However, there …

Jcati Carbon Fiber Recycler: Oven Enclosure, Margarita Romero

All Undergraduate Projects

Central Washington University partners with Boeing and is funded by the Joint Center of Aerospace Technology Innovation (JCATI) to develop a mechanism that takes carbon fiber wing trimmings from Boeing that are resin coated and recycles carbon fiber. This is done by crushing the wing trimmings and then putting it into a 500°C oven to melt off the resin. This project focuses on the enclosure for the oven and making sure precautions are met such as having the outside surface be less than 45c through heat transfer analysis, argon fills enclosure in 13 minutes through fluid dynamics analysis, and 99% …

Multi-Platform Suppressor Design Project, Wyatt A. Openshaw, Alex B. Chiples

Williams Honors College, Honors Research Projects

The Multi-Platform suppressor is a design that is meant to bridge the gap in the suppressor market by being compatible and configurable with both rifle and pistol platform firearms. In the specific design and prototype referenced in this report, the Multi-Platform suppressor was designed to be used with 9mm pistol and 5.56x45mm rifle calibers with safety, effectiveness, and practicality in mind. To achieve this, the suppressor is configurable, utilizing a Nielsen device in the pistol configuration and a solid mount adapter that replaces the Nielson device piston and spring while in the rifle configuration. This allows the suppressor to retain …

Development Of Phase Change Thermal Storage Medium: Cooking With More Power And Versatility, Martin Osei

Masters Theses

With an Insulated Solar Electric Cooker (ISEC), a 100 W solar panel directly cooks food while providing 5W off-grid electricity access; but it cooks slowly. Storing the day’s energy with phase change thermal storage allows ISEC to cook more rapidly as well as cook after sunset. The ISEC is made by sticking a 3ohm resistive to an aluminum pot (inner phase change assembly PCA) where another cooking pot fits. The resistive heater is surrounded by a bigger pot (outer PCA) that contains the PCM and is tightly sealed. The solar panel is connected to the resistive heater with a thermal …