Energy Systems Commons^™

Hydrogen Fuel Cells, Sydney Pilgrim, Skyler Smith

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Hydrogen fuel cells are hydrogen powered energy sources. They convert chemical energy into electrical energy by separating water molecules into the two elements that make up water, Hydrogen (2) and Oxygen (1). Hydrogen fuel cells are looking to become a paramount energy producer to avoid consuming fossil fuels for power. Along with the abundance of Hydrogen in the atmosphere being a benefit of using Hydrogen powered fuel cells, the only emission from these energy sources is water vapor. Many car engines only operate at a 20% fuel efficiency, whereas fuel cell powered cars utilize 60% of the energy produced. Although …

Solar Tracking Sustainable Energy Education, Tara Hart, Donita Legonas

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Two middle school science teachers collaborated with Georgia Southern lab students to conduct research and experimentation on the benefits of utilizing a dual-axis solar tracking system to assess the amount of voltage received during various times of the day. A smaller similar dual-axis solar tracking system was designed and fabricated to utilize in the teachers’ middle school classrooms in the study of renewable energy and the engineering and design process.

Module 2: Solar Powered Cricket Lab & Engineering Guest Speaker, Lindsay Snowden

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Students will participate in a Solar Panel Cricket lab to determine which environmental condition would allow for the solar panel to produce the most power. The three conditions are inside, inside with a flashlight, or outside in the sun. The students will complete a correlating lab worksheet. Students will also ask questions and hold discussions with the guest speaker. Students will actively participate while the guest speaker is presenting.

Power House Sustainable Energy Education, Rachael Grillo, Molly Hopper, Laura Mills

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Renewable Energy, Keith Bazemore

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Lesson Plan for Renewable Energy- Environmental Science.

Nsf Energy - Pico-Grid Smart Homes Power Management System, Aaron Specht, Shaina Neal

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Wind Energy, Bob Deckard, Jaimee Howard

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Dynamic Behavior Of A Clamped-Clamped Bi-Stable Laminate For Energy Harvesting, Ajay V. Kumar, Andres F. Arrieta Ph.D., Myungwon Hwang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Multi-stable laminates have many applications in morphing structures, energy harvesting devices, and metamaterials due to the specific characteristics attributed to the exhibited stable states. Changes between stable states allow for large deflections, on-demand variation of the stiffness of compliant structures embedded within these elements, and control of effective dynamic properties in periodic lattices. These changes in state can be accessed via a snap-through instability triggered by introducing a well-defined activation energy. The resulting oscillations could enable broadband energy harvesting via piezoelectric transduction and resistive circuits. In this paper, a clamped-clamped bi-stable laminate is studied to understand the behavior of the …

Parametric And Design Analysis On Thermoelectric Generators, Shouyuan Huang

Open Access Theses

In facing the limited energy source reserves and environmental problems, thermoelectric generators (TEGs) are one of the promising waste heat recovery systems. The modern TEGs for exhaust stream (e.g. from automobiles) can improve the fuel economy by around 5%, taking advantage of the recent developed thermoelectric (TE) materials.

In this work, we aimed at designing a TEG as an add-on module for a gas-phase heat exchanger with maximized power output, and without negative impact (e.g. maintaining a minimum heat dissipation rate from the hot side). We first developed a parametric optimization algorithm using response surface method (RSM) and genetic algorithm …

Go With The Flow –Thermoelectric Energy, Shawn Bell

Middle School Lesson Plans

In this unit, students will learn how thermal energy be transferred and transformed. They will carry out investigations to gather evidence to support an explanation about direct conversion of heat into electrical energy. They will develop a model that shows the components of the system and changes in the system being investigated, and they will use evidence from the investigation to construct an explanation for how the energy flows.

Cogeneration System Comparison For The Akron Water Treatment Plant, Devin J. Pearcy, Madison R. Morgan

Williams Honors College, Honors Research Projects

Cogeneration is a process of electrical power generation that simultaneously harnesses the heat produced from that electrical generation and uses it to supply heat to a space. The Akron Water Plant was identified as potentially benefitting from this technology for two main reasons. First, they have a large and relatively constant electrical load. Second, they have ownership of a significant amount of natural gas wells at the site.

This report analyzes the economic feasibility of installing a cogeneration plant at the Akron Water Plant (AWP). Data was collected for the plant and its operations, including electricity bills, gas bills, plant …

Analysis And Optimization Of The Scheffler Solar Concentrator, Simone Alberti

Master's Theses

The Scheffler reflector is a new solar concentrator design which maintains a fixed focus while only having a single axis tracking mechanism. This design makes the construction and operation of high temperature solar concentrators accessible to developing nations. In this project, I wrote computer simulation codes to better understand the dynamics and the effect of deformation or deviations from ideal conditions in order to define necessary manufacturing and operational tolerances. These tools and knowledge drove the prototyping of new reflector concepts by myself and other students on my team. A fiberglass prototype was able to drive the cost of a …

A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance J. Harper, William J. Hutzel, James C. Foreman, Aaron L. Adams, Athula Kulatunga

Purdue Polytechnic Masters Theses

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable.

For this research, a manufacturing process that had approximately …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

Computational Models Of Sub-Divided Thermal Energy Storage Tanks Used In Concentrating Solar Power Plants With Parabolic Trough Collectors, Jesus D. Ortega ^, Vinod Kumar *

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Investigation Into The Potential Use Of Windbreaks To Improve Solar Collector Performance, Michael Watts

All Graduate Theses, Dissertations, and Other Capstone Projects

The global demand for energy is ever increasing; however, the world has a limited number of fossil fuels available. Therefore, alternative renewable energy sources must be utilized. For this reason, solar thermal collectors have become an increasingly popular method for providing hot water or space heating. However, solar thermal collectors are most commonly used in areas that experience warm climates throughout the year. In areas that experience seasonal climates, the cold temperatures and harsh climate conditions significantly reduce the performance of solar thermal collectors during the winter months. This thesis examined the potential that the implementation of a windbreak could …

Gate 3 Grid Connection Group Processing Approach:An Analysis, John Leahy

Msc. in Energy Management

The aim of this project is to analyse the Group Processing Approach (the “GPA”) to renewable generator grid connections, and in particular the Gate 3 process which is the latest round of the GPA that is currently being implemented in the Republic of Ireland, to determine if it is the most effective approach for connecting new renewable generation. Gate 3 is the third series of the GPA for connecting renewable generation to the Irish Electricity grid where applications are processed in groups or batches. The size of the Gate 3 has bee capped at 3,900MW with applicants being selected based …

Pump Sequencing Optimization, John S. Allan, Kyle J. Nekimken, Spencer B. Weills

Mechanical Engineering

The purpose of this document is to demonstrate the design, production, and testing of optimum pump sequencing logic for variable frequency drive (VFD) pumps in commercial heating ventilating and air conditioning (HVAC) systems. The product will be developed by Pump Efficiency Solutions (PES), which is a group of Cal Poly students working on their senior project. The product is being developed for Trane, an industry leader in large scale HVAC systems. MATLAB™, Microsoft Excel, Pump System Improvement Modeling Tool™ (PSIM), and fluid mechanics hand calculations were used during software development. Next, we converted the program into Trane’s graphical programming language …

The Very Basics Of Sustainability - An Alternative Viewpoint, Jim Mcgovern

Other resources

This paper examines the context and meaning of the term ‘sustainability’, the factors that determine and govern climate on Earth, the population of the Earth and its trends and influencers, the requirements for sustaining life and the options that are available to humankind. Some viewpoints are presented that are alternative to ‘conventional alternative’ thinking. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’ and also argues that humankind needs to face …

The Very Basics Of Sustainability - An Alternative Viewpoint (Slides With Audio) (Large File! To Speed Up Download, Right-Click On "Download" Link To Save To Own Pc.), Jim Mcgovern

Other resources

This presentation sets out the very basics of ‘sustainability’, although a definition of sustainability is not attempted. Some of the very basics are the context in which the Earth and humankind exist in space and time, the Earth’s climate, the Earth’s population and humankind’s options and choices. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’. The author also argues that, in addressing the challenges that humankind faces, globally concerted effort …

Harvesting Human Exercise Power At The Cal Poly Rec Center: Exercise Bike Power Generator Ii, Jared Rounsevell, Claire M. Shubert, Matthew Snitowsky, Andrew Wong

Mechanical Engineering

The overall goal of this project is to create a workable system to harvest the power generated on exercise bikes at the Cal Poly Rec Center so that the electricity produced can eventually be sent to the power grid. Our part of the project will focus on the mechanical harvesting of this power with the goal of using the product to run the Morningstar ProStar 12V 30 amp charge controller available from the 2007 project. Eventually, the power produced could be fed to the grid in the appropriate form. The finished result of this project should be marketable to exercise …

Micro Hydro Power, Frederick J. Munster

Maine Collection

Micro Hydro Power

by Frederick J. Munster

Department of Economic and Community Development, August, Me. 1999 (?).

Contents: Introduction / History of Hydropower in Maine / Renewables / Why Micro Hydro / Determining Flow / Determining Head / Estimating Energy Potential / Hydro Turbines / Dams, Impoundments, Penstocks and Power Houses / Utility Interconnected Systems / Battery Charging Systems / Operation and Maintenance / Economics / Regulation of Hydro Development / For More Information / References

Feasibility Study Of Maine's Small Hydropower Potential, James D. Sysko

Maine Collection

Feasibility Study of Maine's Small Hydropower Potential

Prepared by James D. Sysko, Small Hydro East, for the Maine State Planning Office, Maine Office of Energy Resources, January 1989.

"This study focuses on finding potential hydropower sites of approximately 50 kw to 1000 kw in capacity."

Saving Energy In Rural Maine : Or Who's Doing What On The Farm, Mane Department Of Agriculture

Maine Collection

Saving Energy In Rural Maine : Or Who's Doing What on the Farm

Compiled by Bettina M. Blanchard and Edited by Bill Seekins.

Maine Department of Agriculture, Food and Rural Resources, Division of Resources Development, Augusta, Maine, 1983.

Contents: List of Photographs and Diagrams / Introduction / Projects / 1. Wind / 2. Wood Heat Applications On the Farm / 3. Solar Applications / 4. Manure Handling and Waste Utilization / 5. Energy Efficient Cooling Methods / 6. Energy Saving In Field Operations / 7. Production and Use of Alternative Fuels / 8. Multi-Project Sites / Summary and Conclusions / …

Energy Considerations In Tanzania, A Makange

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions