Energy Systems Commons^™

Power At Sea Develop Phase, Jake Lauer, Isabella Heinemann, Bailey Gargasz, Zachery Boyer

Mechanical Engineering

This project develops a renewable, wave-powered charging system designed to extend the mission duration of Autonomous Underwater Vehicles by eliminating the need for frequent manual battery replacement. Building upon a prior oscillating water column prototype from the CONCEPT phase, the team redesigned and tested an improved system capable of converting wave-induced air motion into electrical power using a Wells turbine. Key enhancements include doubling the column diameter to increase displaced air volume, integrating a flared inlet and bi-directional nozzle to improve airflow, and selecting corrosion-resistant materials suitable for long-term deployment in marine environments. Multiple prototypes were constructed and evaluated through …

Hydropower Collegiate Competition 2026, Andres R. Arreola, Sammy D. Taporco, Kathryn E. Tinney, Ahmer S. Dhillon

Mechanical Engineering

The Hydropower Collegiate Competition (HCC) is sponsored by the Department of Energy’s (DOE) Water Power Technologies Office (WPTO) and is meant to offer university students an opportunity to solve complex hydropower challenges, build industry connections, explore career connections, and obtain a greater knowledge of hydropower’s potential in the United States. For this year’s competition, our team investigated a potential in-conduit hydropower site in California. Our work included creating a design package for a crossflow turbine related to our selected site and completing the community connections challenge. We also completed a siting and design report, community connections report, design and siting …

Automated Solar Panel For Lmu Campus, Michael Hennessy, Jack Michaelis, Jack Leon, Nick Aiello, Mustafa Mozael

Honors Thesis

This Final Design Review outlines the design and implementation of an automated sun-tracking solar panel system for Loyola Marymount University's campus. The project aims to improve the efficiency of existing static solar panels by designing a new system of sun-tracking panels at a low cost and high power efficiency. The report covers the project's background, including LMU's current solar energy infrastructure and sustainability goals. It analyzes the advantages of automated solar panels over static ones, presenting comparative studies that demonstrate significant increases in energy capture. The report details the calculations for solar angle tracking, along with the mechanics and electronics …

Wind Turbine Rotor Test Stand, Ashlen Brooke Sperry, Cayley Mckee, Kristofer Lee Pascua, Francisco Medina

Mechanical Engineering

Dr. Lemieux and the mechanical engineering department at Cal Poly are renowned for the countless projects that allow students to be a part of hands-on learning and the “Learn by Doing” experience. One such experience is the wind energy class that requires students to design, build, and test wind turbine rotors; however, a test stand for these rotors is needed. Dr. Lemieux and the senior project team will design and build a test stand that will enable the simultaneous testing of two student-designed rotors at the existing wind turbine site. In addition to energy measurement, Lemieux emphasizes the importance of …

Wood-Plastic Composites Integration For Triboelectric Nanogenerator Electricity Generation, Hanbyeol Park, Razamala Yashna F. Dimaporo, Sophia Maureen A. Emperado, Anton Jefferson L. Pangilinan, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Access to electricity in underdeveloped communities is particularly crucial in improving the living standards of people and alleviating poverty by promoting sustainable development. This study deals with the exploration of incorporating wood-plastic composite (WPC) – specifically wood pulp (W) and high-density polyethylene (H) – into triboelectric nanogenerator (TENG) flooring system to convert mechanical energy to electrical energy, promoting sustainable energy, reducing greenhouse gas emissions, improving the quality of life, and serving as feasible flooring tiles. Two types of TENG tiles were prepared by using different WPC ratios: 30W:70H and 70W:30H. A static bending test was conducted to assess the flexural …

Estimation Of Useful-Stage Energy Returns On Investment For Fossil Fuels And Implications For Renewable Energy Systems, Emmanuel Aramendia, Paul E. Brockway, Peter G. Taylor, Jonathan B. Norman, Matthew K. Heun, Zeke Marshal;

University Faculty Publications and Creative Works

The net energy implications of the energy transition have so far been analysed at best at the final energy stage. Here we argue that expanding the analysis to the useful stage is crucial. We estimate fossil fuelsʼ useful-stage energy returns on investment (EROIs) over the period 1971–2020, globally and nationally, and disaggregate EROIs by end use. We find that fossil fuelsʼ useful-stage EROIs (~3.5:1) are considerably lower than at the final stage (~8.5:1), due to low final-to-useful efficiencies. Further, we estimate the final-stage EROI for which electricity-yielding renewable energy would deliver the same net useful energy as fossil fuels (EROI …

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Three Dimensional Cfd Simulation Model With Experimental Validation Of Silica Gel–Water Pair Adsorption Cooling Bed, Hesham Safwat, Taher Halawa

Mechanical Engineering

In this paper, a three-dimensional full simulation model of a solar-driven adsorption cooling system integrated with user-defined functions (UDF) is successfully validated with a manufactured adsorption chamber filled with silica-gel type A. model is validated on the desorption phase with a maximum deviation error of 1.7%. Temperature with adsorption contours are shown for more understanding of the heat flow with adsorption behaviour inside the chamber in all directions. The maximum temperature at the desorption phase is reached after 300 seconds at fins area, and adsorption maximum uptake reached 0.16 kg/kg at fins wall but reached from 0.13 to 0.14 kg/kg …

Energy Planning Model Design For Forecasting The Final Energy Consumption Using Artificial Neural Networks, Haidy Eissa

Theses and Dissertations

“Energy Trilemma” has recently received an increasing concern among policy makers. The trilemma conceptual framework is based on three main dimensions: environmental sustainability, energy equity, and energy security. Energy security reflects a nation’s capability to meet current and future energy demand. Rational energy planning is thus a fundamental aspect to articulate energy policies. The energy system is huge and complex, accordingly in order to guarantee the availability of energy supply, it is necessary to implement strategies on the consumption side. Energy modeling is a tool that helps policy makers and researchers understand the fluctuations in the energy system. Over the …

Dynamic Hvac Energy Management Using Commercial Building Occupancy Metrics & Neural Networks, Krishna Chaitanya Jagadeesh Simma

Civil Engineering ETDs

With the rise of technology use in buildings, it is now possible to collect data that can be used to improve building energy consumption. One factor that has significant impact on building energy consumption is occupancy. Recent studies have shown promising results in obtaining occupancy information from existing infrastructure such as WiFi router networks. However, these existing frameworks require additional investments through software upgrades, added infrastructure, computational resources, and may raise occupant privacy concerns. Additionally, with occupant thermal comfort statistics being lower than ASHAREA specified standards, a novel approach for indoor climate control is needed. To address the limitations in …

Cal Poly Wind Power: Wind Turbine Prototype, Sophie A. Spencer, Maggie Nevrly, Michael Reyna, Loi Q. Nguyen

Mechanical Engineering

The Cal Poly Wind Power (CPWP) club is competing in the Collegiate Wind Competition (CWC) hosted by the National Renewable Energy Laboratory (NREL). The CWC is hosted annually by NREL to increase the number of skilled workers prepared to work in the wind energy industry. Our senior project team is one of several design teams contributing to the CPWP prototype turbine design including the pitching mechanism, blade design, generator, and shaft. The scope of this project is to design the yaw mechanism, tower, and nacelle. The goal is to create components that function well with other planned components and are …

Sustainable Energy Storage, Jacob S. Grillo, Alyse C. Coonce, Jack R. Linchey, Nick P. Schnorr

Mechanical Engineering

This Final Design Review document covers the work we, students at California Polytechnic State University – San Luis Obispo, have performed in collaboration with Mr. Harish Bhutani and Dr. Mohammad Noori. The project’s intent is to create an energy storage system for off-grid and developing region applications using alternative technologies to lithium-ion battery storage. We plan to manufacture and assemble a scale model of the energy storage system to prove effectiveness and practicality. This system will store enough energy to power basic appliances and essential devices for a house or community. The chosen design direction will be a flywheel, as …

Feasibility Study Of Portable Solar Powered Blood Storing Refrigerator, Saroj Subedi

Honors Theses

This report is focused on the preliminary feasibility of portable solar-powered blood-storing refrigerators primarily based on calculations of energy required to maintain the temperature of the refrigerator, the electricity required throughout the day, calculating sufficiency of power supplied by the solar panel, and selection of battery for power storage. The method and the trend of a feasibility study involve the study of blood properties, separation of blood components after donation, and their storage conditions. Then, the portable size of the refrigeration has been proposed with three different compartments for storage of each blood component. The further methods involve the selection …

Smud Solar Regatta, Logan Garby, Nam Le, Jacob Singer, Alejandro Carrera, Laura Casas

Mechanical Engineering

The Sacramento Municipal Utility District (SMUD) hosts the Solar Regatta every year in Rancho Seco, CA, a competition which consists of teams building a solar powered boat to compete in three races: the sprint race, endurance race, and slalom race. The Cal Poly Solar Regatta team was informed mid-project by SMUD that the competition has been canceled once again for spring 2021, but the team decided to move forward with the construction of the boat. The previous Cal Poly team from 2019/2020 designed the hull and propulsion system of the boat. The 2020/2021 team worked with the previous team in …

A Theoretical Study On Integration And Optimization Of Gas Turbine Problems With Solar Energy System, Ahmad M. Abubaker

Theses and Dissertations--Mechanical and Aerospace Engineering

Gas Turbine (GT) power plants suffer from sensitivity to ambient-air temperatures, high fuel consumption, and a high amount of waste heat dumped into the ambient. Various solutions were proposed to solve these drawbacks, which could simultaneously solve at most two problems, usually at the expense of the third. For instance, inlet-air cooling can reduce ambient-air temperatures but will result in increased fuel consumption. However, in this work, a novel cascaded system was integrated into a combined cycle, capable of simultaneously solving all the aforementioned GT drawbacks. Parabolic trough collectors were used to preheat the air at the combustion chamber inlet …

Integrated Resource Plan For Portland General Electric (Pge), Mary Biswal, Alejandro Castelan

Master's Projects and Capstones

An integrated resource plan (IRP) for Portland General Electric (PGE) is developed in this master’s project. The IRP is based on capacity expansion modeling for zero-carbon emission scenarios. PGE is a public electric utility based in Oregon and serves around 887,000 customers across a territory of 4,000 sq. miles. The utility’s resource mix is currently heavily dependent on natural gas making up almost 50% of its capacity. While the state renewable portfolio standards (RPS) require Oregon power utilities to derive 50% of their generation from renewable sources by 2040, PGE plans to move rapidly into a clean energy mix by …

An Integrated Resource Plan For Arizona Public Service Electric (Aps), Irene Boghdadi, Randy Chiu

Master's Projects and Capstones

Our Masters Capstone Project is an Integrated Resource Plan (IRP) for Arizona’s largest electric utility, Arizona Public Service Electric (APS).

An IRP is developed by utilities to identify the optimal combination of demand- and supply-side resources needed to reliably meet forecasted demand for energy and capacity, including a planning reserve margin, over a future period.

In addition to APS’s obligation to serve the growing load in Arizona while minimizing costs, it is required by the state to adhere to the Renewable Energy Standard (RES) policy of 15 percent retail sales from renewable energy resources by 2025.

The analysis described in …

An Assessment Of Renewable Energy Technology Implementation In Storrs, Connecticut: Emissions Reduction And Feasibility Of A Microgrid System At Uconn, Sophie Macdonald

Honors Scholar Theses

The purpose of this project is to design a clean energy-sourced microgrid for UConn’s main campus that would reduce the university’s energy emissions while remaining within the geographic boundaries of viable UConn-owned land. Economic cost was not considered in this analysis; instead, emissions and space constraints were the optimized measures of value and feasibility. Sources of energy that were considered include photovoltaics (PV), wind turbines, hydrokinetic systems, and fuel cells. Energy storage capacity was included in the analysis as well. The overall system was optimized first by ignoring space constraints and for a minimum of 10% reduction from the current …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

On The Energy Sustainability Of Active And Passive Building Integrated Technologies In The Context Of A Changing Climate For Tropical Coastal Cities, Rabindra Pokhrel

Dissertations and Theses

Caribbean Sea surface temperatures have been rising at an alarming rate of 0.020C/year. The effect of rising sea surface temperatures is reflected in increasing in 2m air temperature over the Caribbean. The rise in extreme temperatures increases human discomfort and energy demands for air conditioning (AC) putting both the population and energy infrastructure at higher risk of vulnerability. This vulnerability is amplified in compact cities where anthropogenic heat removal from the built environment further increases the temperature of the urban canyon with feedback on human comfort and energy demands. Although there has been prior work reported on mitigating energy demands …

Hvac System Energy Audit For Leverett Elementary School, Connor Smalling

Biological and Agricultural Engineering Undergraduate Honors Theses

Leverett Elementary School is located in Fayetteville, AR. The school needs significant upgrades to its infrastructure. The Fayetteville Public School District has voted to pursue an Energy Services Performance Contract (ESPC) in order to finance the desired upgrades to Leverett Elementary, among other schools in the district.

The scope of this thesis was to perform an energy audit on the existing heating, ventilation, and air conditioning (HVAC) system. By using an energy modeling software, eQuest, the building and the existing base system were modeled to determine utility consumption. Three different HVAC system alternatives were analyzed against the base system by …

Swarm Behavior To Mitigate Rebound In Air Conditioning Demand Response Events, Jason Yasuto Kuwada

Boise State University Theses and Dissertations

Thermostatically Controlled Loads (TCLs) have shown great potential for Demand Response (DR) events. However, it has been commonly seen that DR events using TCLs may cause demand rebound, especially in homogeneous populations. To further explore the potential for DR events, as well as the negative effects, a stability and resilience analysis were performed on multiple populations and verified with agent based modeling simulations.

At the core of this study is an added thermostat criterion created from the combination of a proportional gain and the average compressor operating state of neighboring TCLs. Where DR events in TCLs are commonly controlled by …

Energy Transformation And Conservation Investigation, Mike Jackson, Holly Haney

High School Lesson Plans

Students will use a thermoelectric generator module to analyze the relationship between thermal and electrical energies. Using data collection sensors and analysis software, students will investigate the relationship between the temperature gradient across a thermoelectric generator module and the resulting electrical potential. Students will then use their data and analysis to solve problems relating to waste thermal energy in electrical systems and communicate their work to their peers and teacher.

Pico-Grid Smart Homes Power Management System, Kathleen Hobbs, Mbonya Myers

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Solar Tracker Renewable Energy, Stephanie Christie, Annabeth Helmly, Matthew Smith, Katrina Vaughan

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Analysis Of Horizontal Axis Wind Turbine Array Optimization, Peter-Claver Nwanze, Keith Bazemore, Jessica Lyons, J. Ann Mitchem

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Wind energy is the fastest growing form of renewable energy, with a multitude of possibilities for expansion. This, as well as other forms of renewable energy, will facilitate understanding of the growing concerns regarding global warming by decreasing our dependence on fossil fuels. Wind energy requires wind speeds of at least six miles per hour; therefore, only certain geographical areas are suitable for the use of this technology. The purpose of this experiment was to determine whether the orientation of an array of wind turbines increases or decreases energy production and efficiency. In this study, various arrays consisting of five …

Design Of Wind Turbine Tower Height And Blade Length: An Optimization Approach, Ryan Wass

Mechanical Engineering Undergraduate Honors Theses

The wind industry is a fast growing market and is quickly becoming competitive with traditional non-renewable energy resources. As with any developing industry, research must continually be redefined as more complex understandings of design variables are learned. Optimization studies are common ways to quickly refine design variable selections. Historical wind turbine data shows that the tower hub height to rotor diameter ratio scales almost linearly. However there is no specific rule that dictates the optimum hub height for a given diameter. This study addresses this question by using an Excel based optimization program to determine the height to diameter ratio …

The Correlation Between Energy Cost Share, Human, And Economic Development Using Time Series Data From Australasia, Europe, North America, And The Brics Nations, Ryan Roberts, Josephine Kaviti Musango, Alan Colin Brent, Matthew K. Heun

University Faculty Publications and Creative Works

This paper investigates how a change in a region's energy cost share (ECS), a ratio of a region's energy expenditure as a fraction of its gross domestic product (GDP), affects the region's social and economic development. Nations from four regions of the world, namely Australasia, Europe, North America, and the BRICS nations (Brazil, Russia, India, China, and South Africa) were chosen for this study. Using time series data from the period of 1978 to 2010, the annual ECS of each country was compared to the year-on-year GDP change, as well as the components of the human development index (HDI). High …

Pico Grid-Smart Home Energy Management System, Kristina Istre, James E. Conaway Mr.

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Principles Of Wind Energy Production, Willie Haynes, Dianne Lhotte, Johnetta Moore

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Three public school teachers designed basic wind turbine energy production tests to help them teach wind energy principles to middle and high school students. Variables affecting wind turbine energy production were identified (distance from wind tunnel, blade design, angle of attack, and wind speed), and experiments were conducted to test each variable. This research aligns with Georgia DOE curriculum standard STEM-FET-3.7: Apply STEM knowledge and skills through hands-on research and lab experiments that are focused upon recreating the inventions and social solutions that were realized in the past, present, and possible future. These experiments will be a part of an …