Electro-Mechanical Systems Commons^™

Portable Humidity Chamber, Calvin Wright, Ian Heilers, Sam Taylor

Honors Capstones

This engineering project, sponsored by Crandall Stats and Sensors, focuses on improving the ability to test product performance under controlled environmental conditions by designing a portable humidity chamber capable of maintaining a stable relative humidity between 20 and 80 percent with a tolerance of ±0.5 percent. Consistent humidity is crucial for evaluating how moisture influences material properties, product reliability, and long-term durability in real production environments. Because Crandall conducts testing across multiple facility locations, the chamber must also be lightweight, transportable, and easy for operators to use without specialized training. Developing such a system provides the company with a valuable …

Mechatronic System Mobility Enhancement Device For Patient With Cerebral Palsy, Tori N. Saenz

Honors Theses

The primary objective of this project was to design and fabricate the electronic, power, and control systems for a mobility device oriented around the needs of a young man with cerebral palsy, named Lane Bryant. This project was completed during the Mechanical Engineering Capstone Senior Design Experience. A separate group completed the design and fabrication of the wheelchair’s ergonomic and structural elements. Research on the typical operation of existing electric wheelchairs was completed to form a baseline of operating parameters. Observations from a previous wheelchair for Lane, called the Wild Thing, guided many design choices. The power supply was designed …

Rc Baja: Drivetrain And Chassis, Caden Harris

All Undergraduate Projects

The engineers in the CWU Mechanical Engineering Technology program were asked to design and manufacture a remote-controlled Baja car to compete in several different events. The car was required to compete in a drag race, slalom event, and Baja event against other cars created by engineering students. To compete at the highest level, the cars needed to finely balance ruggedness, weight, torque, and top speed.

This report is dedicated to the designing, manufacturing, and testing of the drivetrain and chassis that supported the RC car as it competed in the school-sanctioned competition; a partner was responsible for the steering and …

Inverted Fluorescence Microscope, Matthew B. Pfeiffer, Spencer George Hann, Thomas James Eggenberger, Trevor Lee Blythe

Mechanical Engineering

Team F13 is composed of Trevor Blythe, Spencer Hann, Matthew Pfeiffer, and Thomas Eggenberger. We are all majoring in mechanical engineering and in our final year of study here at Cal Poly San Luis Obispo. This project is a continuation of a 2019-2020 senior project. The previous team designed and built a functioning inverted fluorescence microscope (IFM) from scratch. This device was created as a lab tool for undergraduate students to be able to perform experiments on microfluidic devices constructed in Cal Poly’s Microfabrication Laboratory. Although substantially functional, several design constraints had not yet been met. Our team has improved …

Theoretical Design Of A 360 Degree Pendulum Ride, John William Elliott

Williams Honors College, Honors Research Projects

This project uses several areas of study: mechanical physics/design of moving parts, electrical power, and human comfort. It is based on the pendulum ride at Cedar Point called "maXair." One of the goals with this project is to create a theoretical, simpler version of a 360 Degree Pendulum Ride that operates on the same principles of a conventional pendulum rides. The velocity, forces on the shaft in the middle of the ride, the accelerations, the g force on the riders, and all the other forces associated with the pendulum ride were analyzed as well.

Electromagnetic Actuator For Camless Engines, Nicholas Olesh, Charlie Thomas Glenwright, Tim Wills De Tone, Darya Daniel Darvish

Mechanical Engineering

This document summarizes the research, objectives, project plan, and design for developing an electromagnetic actuator valve for use in a camless internal combustion engine. While electromagnetic valve actuators have not been implemented into a working product to date, there have been many attempts to research and develop working prototypes. Similar products have been developed, but they do not use purely electromagnetic actuation. This research is significant because it shows the challenge that must be overcome and outlines potential design solutions to the problem. The objectives section highlights the problem statement and what is aimed to be achieved in this project. …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

Reactive Archey Target Design Team "Mimic", Brandon Croyle, Jacob Boss, David Rodgers, Austin Wivell

Williams Honors College, Honors Research Projects

This design project will aim to provide archery hunters with a platform to simulate shooting at string jumping deer. String jumping refers to a spooked deer hearing the snap of a bow string and instintivly ducking up to ten inches. This often results in wounded or missed deer. We will design and build a control system that uses the sound of a bow string as a trigger to operate a mechanical target system. A sound sensor will mimic a deer’s hearing in close range hunting and then send a signal to the mechanical system to replicate the dropping motion of …

Design, Testing And Evaluation Of Robotic Mechanisms And Systems For Environmental Monitoring And Interaction, James K. Higgins

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Unmanned Aerial Vehicles (UAVs) have significantly lowered the cost of remote aerial data collection. The next generation of UAVs, however, will transform the way that scientists and practitioners interact with the environment. In this thesis, we address the challenges of flying low over water to collect water samples and temperature data. We also develop a system that allows UAVs to ignite prescribed fires. Specifically, this thesis contributes a new peristaltic pump designed for use on a UAV for collecting water samples from up to 3m depth and capable of pumping over 6m above the water. Next, temperature sensors and their …

The Design Of A Mobile, Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Modern animatronics are used as a tool to help engage audiences in realistic and entertaining experiences. Many animatronic figures are dynamic in movement, but static in mobility. The research presented covers the beginnings of mobile animatronic research. An animatronic bald eagle, Opportunity, was designed for that purpose. Animations for Opportunity are generated by integration of Arduino, Pololu Mini Maestro, and Hitec Servo Motors. Arduino receives signals from flex sensors which cause voltage variations when “flexed”. The 1:1 scale, animatronic eagle can be perched on the arm of an “actor” who simulates an eagle’s caretaker. The flex sensors are located within …

Automated Foosball Table Year 1: Final Project Report, Juan David Gutierrez-Franco, John Inlow, Jesse Graham, Larry Huang

Mechanical Engineering

This project is a first iteration of an automated foosball table designed and created using servomotors provided by Yaskawa to create an interactive tradeshow display where guests can play against the algorithms developed in the PLC (programmable logic controller) controlling the servomotors. There will be a second iteration of the project done by a different team directly following this one. The motion components were selected with the intent to be able to surpass the reaction times and speeds of expert human players. There are a total of eight servomotors, four controlling linear actuators for translation of rods, and four controlling …

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.