Electro-Mechanical Systems Commons^™

Torsional Vibration Kit Simulator (Tks), Joseph Thachet, Luca Lawson, Ryan Ota, Otis Mcloughlin

Mechanical Engineering

The goal of this project was to create torsional vibration on a shaft while limiting axial and radial vibration. To do this an eddy current brake was used to slow down a rotating shaft. The electromagnets used to create the eddy currents are able to be turned on and off at a frequency produced by a function generator. This power cycling of the electromagnets creates an alternating braking force thereby inducing torsional vibration while limiting the other two vibration types

Heart Valve Leaflet Cutting Automation, Gabriella Aclan, Josh Deweese, Lizzie Dilao, Jason Wong

Mechanical Engineering

The content contained in this report is confidential and proprietary information of Edwards Lifesciences.

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Conversational Social Robot, Julianna M. Christopoulos, Mackenzie Goldman, Cece E. Hujanen, Jared Hunter

Mechanical Engineering

Background: Social robots are used in various settings to reduce burden on human workers and expand opportunities for people in need of assistance.

Challenge: Design a humanoid robot head and torso capable of holding conversations and interacting with a user using a LLM and motion. Conversations are limited to discussing Cal Poly resources and opportunities with visitors to the Bently Research Center on campus.

Mechatronic System Mobility Enhancement Device For Patient With Cerebral Palsy, Tori N. Saenz

Honors Theses

The primary objective of this project was to design and fabricate the electronic, power, and control systems for a mobility device oriented around the needs of a young man with cerebral palsy, named Lane Bryant. This project was completed during the Mechanical Engineering Capstone Senior Design Experience. A separate group completed the design and fabrication of the wheelchair’s ergonomic and structural elements. Research on the typical operation of existing electric wheelchairs was completed to form a baseline of operating parameters. Observations from a previous wheelchair for Lane, called the Wild Thing, guided many design choices. The power supply was designed …

Pressure Switch Tester, Michael Starasinich, Andrew Dobson, Jordan Huschen, Mitchell Smith, Melvin Brown Iii

Honors Capstones

Abstract—- The Pressure Switch Test Stand is a comprehensive and automated testing solution designed to streamline the actuation and validation of simultaneously. At the core of the system is a PLC-controlled architecture that enables precise control and simulation of pressure conditions, replicating real-world scenarios to ensure accurate and reliable switch performance.

This test stand integrates robust mechanical fixtures, a reliable pneumatic control system, custom-designed electrical circuits, and a modular software interface, working in unison to deliver consistent and high-fidelity testing outcomes. Each pressure switch undergoes a sequence of pressure ramps and holds, with the system continuously monitoring switch states, activation …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Reconfigurable Python Autopilot Software For Rc Aircraft, Kate Doiron

Honors Theses

No abstract provided.

Development Of A 3-Dof Contactless Magnetic Joint Actuator, Elle Whitney

Theses and Dissertations

The magnetic joint actuator is a relatively recent research technology that expands on the brushless DC motor to encompass rotation in three degrees-of-freedom. These actuators involve a stator with a series of electromagnetic coils oriented normal to a spherical permanent magnet rotor which can be controlled by modulating the current of the stator coils. The development of a magnetic joint actuator that operates without a physical connection between the stator and the rotor has wide applications for robotics in dust-sensitive environments, where a device with bearings would otherwise falter. This work details the design, sensing, and control of such a …

Validating An Electronics Cooler Experiment And Optimizing Its Performance Using Ansys Icepak, Daniel V. Curl

Mechanical Engineering Undergraduate Honors Theses

Researchers at the University of Arkansas' Mechanical and Electrical Engineering Research Departments have designed and built a cold plate and substrate design for a 10 kV SiC MOSFET power module. Many variables define the design of the cold plate and substrate system and have quantifiable effects on the device’s performance. These variables include but are not limited to geometry and material selection of the fins and substrate. Manufacturing many test designs, running experiments, and comparing their performance is a time-consuming and expensive design optimization method that may be effective for some low-cost applications. Still, simulation is often a more cost-effective …

The Prototype Of A Fully Automated Pressuremeter For Various Geotechnical Applications, Anuar Akchurin

Theses and Dissertations

The geotechnical engineering field requires high-quality in-situ testing equipment that ensures consistency in the test execution. This research focuses on developing and testing a prototype of a fully automated pressuremeter control unit to allow the industry to obtain reliable and controlled stress-strain data, thereby improving efficiency and reducing testing time.

The objectives of this work are to design and develop a system with the necessary components to perform the pressuremeter test, integrate the testing procedure into the state machine design, enable automated testing, and validate the results by comparing the stress-strain data with that obtained from the existing hand-operated pressuremeter …

Autonomous Control Of A Hybrid Unmanned Aerial Towed System On A Moving Platform, Zachary M. Miller

Graduate Theses and Dissertations (2019 - present)

With tethered rotor drones being more popular for aerial surveillance, moving platforms for tethered drones are being researched. However, these systems require constant power to the rotor drones for stabilization. With this difficulty in power consumption, a hybrid drone solution is presented. The hybrid drone is similar to an airplane, with quadcopter motors attached for stabilization and thrust when not moving.

The controller for the hybrid drone was tested and verified in simulation. The simulation of the system was built in Fortran and consists of a driver, a tether, and a hybrid drone. The driver was modeled after a generic …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Cellulose Recovery From Waste Denim Fabrics Through Indigo Vat Dye Reduction And Spandex Dissolution, Tito N. Venance

Tanzania Journal of Engineering and Technology (TJET)

This study addresses environmental conservation by tackling end-of-life management for post-consumer denim garments through the recycling of cotton fibres from waste denim. The purification process involved dithionite reduction of vat dyes in the presence of an alkali followed by selective dissolution of spandex using N,N-dimethylformamide (DMF). Optimal conditions for dye removal were determined at 90°C for 120 minutes with sodium hydroxide at 25 g/L, sodium dithionite at 6 g/L and PVP at 4.5 g/L, while spandex extraction was achieved using a 5% DMF solution at 70°C for 4 hours. Ultraviolet (UV)-vis spectrophotometric analysis indicated a significant increase in whiteness (DL*). …

Assessment Of Factors Contributing On Early Rotting Of Chromated Copper Arsenate Treated Utility Power Distribution Wood Poles In Tanzania, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to assess the factors contributing to the premature decay of Chromated Copper Arsenate (CCA) treated utility power distribution wooden poles in Tanzania. Deteriorated poles samples from various regions in Tanzania were analyzed using handheld X-ray spectrometry to quantify the retention of CCA preservative chemicals. The ages of these poles were estimated based on annual growth rings. The findings indicated that premature failure of CCA treated wooden poles is attributed to an imbalance in the chemical composition of the preservative solution. The study found that CuO retention in most samples ranged between 10-18 kg/m3, significant lower that the …

Application Of Artificial Neural Network Models For Predicting Diesel And Petrol Prices In The Geographically Sparsed Regions In Tanzania, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Fuel consumption in Tanzania, mainly diesel and petrol, accounts for 82 percent of the energy consumption in the country, with significant price volatility affecting market stability, availability of fuel, and investment decisions. This study uses an artificial neural network (ANN) with a backpropagating algorithm to predict fuel prices in four regions of Tanzania. Key input parameters include the currency inflation rate (CIR), the petrol fuel inventory (PFI), the diesel fuel inventory (DFI), and the fuel transport costs (FTC). The study selected the 6-10-10-2 ANN structures for Sumbawanga-Rukwa, Mpanda-Katavi, and Mbeya-Mbeya as well as 6-10-9-2 for the Songea-Ruvuma region. The results …

Factors Affecting Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries: Tanzania Food And Beverage Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

Industry 4.0 has increasingly become a focal point of scholarly inquiry. Nonetheless, there remains a noticeable lack of comprehensive research on the diverse and systematic factors that influence the adoption of Industry 4.0 Predictive Maintenance (PdM 4.0) in manufacturing sectors within developing regions, particularly in East Africa. This study seeks to bridge this research gap by investigating the key determinants affecting the actual implementation of PdM 4.0 in Tanzania’s food and beverage manufacturing industries. To achieve this objective, a mixed-methods research design was adopted, combining both qualitative and quantitative approaches. Qualitative data were obtained through in-depth interviews with ten industry …

Synthetic Inertia Provision For Load Frequency Control In Networks With High Penetration Of Renewable Energy Sources, Paulina Mkoi

Tanzania Journal of Engineering and Technology (TJET)

The integration of renewable energy sources (RESs) such as solar photovoltaic (PV) and wind energy has become a promising solution as the world shifts toward clean energy. Solar PV and wind resources are increasingly replacing conventional synchronous generators, leading to reduced system inertia and increased vulnerability to frequency instability during disturbances. To address this challenge, this study proposes a novel synthetic inertia provision strategy using a battery energy storage system (BESS) integrated alongside solar PV. The proposed method dynamically compensates for the loss of inertia by considering the variability of solar PV output due to changes in irradiance and temperature. …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Heavy Metals Pollution In Roadside Ecosystems, Lilian Matafu

Tanzania Journal of Engineering and Technology (TJET)

Heavy metals refer to metallic elements that are characterized by having a relatively high density and they are toxic or poisonous even at low concentration. They are environmental pollutant owing to toxicity and longevity in atmosphere and ability to accumulate in living things via bioaccumulation. They tend to enter in different system such as food chain. Analyses of water, soil sediment and the surrounding growing plants (Cynodon dactylon and Cyperus species) for selected heavy metals (Cd, Pb, Zn and Cu) were conducted on a roadside pond located at Boko MSB, Dar es Salaam. Pond water, soil sediments and plant samples …

A Bibliometric Analysis Of Pat-Seig Evolution As An Alternative Energy Generation Method, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Pumps as Turbines (PATs) coupled with Self-Excited Induction Generators (SEIGs) as an alternative energy generation method have been the subject of significant research in recent years. This paper presents a bibliometric analysis of the evolution of PAT-SEIG technology as an alternative energy generation source. An analysis of a comprehensive dataset of peer-reviewed journal articles, conference proceedings, and patents related to PAT-SEIG systems, using advanced bibliometric techniques and PRISMA to identify key research themes, influential authors, the growth of the field and patterns of collaboration, and changes in research focus over time. Over a publication period of 32 years, a total …

Effects Of Thermal Shock Protection Methods On Pressure Measurements In A Rapid Compression Machine, Myeji Materego

Tanzania Journal of Engineering and Technology (TJET)

The study investigates the impact of thermal shock protection methods on pressure measurements in Rapid Compression Machines (RCMs). It focuses on the performance of various pressure transducers, specifically 601A, 701A, 6061B, and 7005, under atmospheric initial conditions. The research emphasizes the importance of mounting techniques and coatings, revealing their significant effects on pressure trace accuracy. Special mounting adaptors for the pressure transducers were designed and manufactured, this enabled simultaneous measurements for all transducers to be made in a single compression stroke. Instantaneous pressure within combustion chamber was measured when air was compressed in RCM from initial pressure and temperatures of …

Efficient Operation Of Direct Coupled Solar Home Pv System: A Case Of Solar Home Pv System Installed In Dodoma, Tanzania, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

Direct coupled Photovoltaic (PV) system is a common topology among most of the off-grid communities in the world. This topology has less components hence resulting in low investment costs. However, it suffers much losses when battery operating voltage is far from maximum power point voltage of PV modules. This scenario can be attributed by different factors such as; variation in solar radiation, load profile and temperature. Efficient operation of these systems is required in order to reduce losses. Usually in direct coupled system, PV modules are connected in parallel with batteries through a charge controller hence making PV output to …

Towards A New Era Of Surgery Using Intelligent Robot, Ahmed Mahfouz, Hassan A. El Gamal, T. Awad, M.B. Badawi

Journal of Engineering Research

This research aims to overcome the difficulties of surgical tumor removal, especially in brain tumors that needs precision and time saving of the operations. The traditional surgical approach often is slow and targeting accurate manual cutting of the tumor, which is time-consuming and increase the risk to the patient. The error in cutting the deep layers of the tumor can occur, which increase the cost and dangerous for the patient.

To overcome these challenges, a proposed solution involves designing a robot that can quickly and accurately remove tumors by following their contours as it comes from the medical imaging data, …

Design, Modeling, And Control Of Medical Service Quadrotor, Mohamed Eid, Anas Mohamed, Ali M. Mohamed

Journal of Engineering Research

Due to road accidents, it is difficult to supply injured people with first aid, especially in difficult-access regions. Also, uneven roads or far places pose a problem for ambulances and doctors to reach and save injured people’s lives. The paper aims to design, model, and control a drone able to fly at different heights and support patients with essential needs after accidents. The drone also contains sensors to measure blood sugar and pressure in cases of diabetic coma that require urgent intervention. The drone design was tested using SolidWorks and FLUENT to ensure safe design in different flying conditions. The …

Intelligent Microfluidic Systems For Precision Manipulation And Real-Time Recognition Via Dielectrophoresis And Deep Learning, Negar Danesh

Mechanical and Aerospace Engineering Dissertations - Archive

This dissertation introduces intelligent microfluidic platforms by combining advanced DEP-based manipulation with real-time visual feedback. A DEP device featuring circular corral traps and dual-plane electrodes enables precise submicron particle trapping, high-resolution particle separation, and cell-particle co-assembly. Simulations and experiments confirm enhanced electric field control and stable confinement. To enable adaptive operation in EWOD systems, a deep learning model (U-Net) was developed for real-time droplet meniscus segmentation. The model achieved 98% accuracy and remained robust under noisy, low-contrast conditions. A live video pipeline was implemented, enabling consistent frame-by-frame feedback for closed-loop control. Together, these innovations establish a foundation for autonomous, high-performance …

Simulating Positive Ion Distribution In The Protodune Single Phase Detector, Vishnu Pfeiffer

Electronic Theses and Dissertations

This work covers the validation and implementation of a model to solve for argon ion (Ar+) distribution in the ProtoDUNE-SP liquid argon time projection chamber (LArTPC). ProtoDUNE-SP undergoes a constant flux of cosmic ray muons due to surface operation. The performance of the ProtoDUNE-SP provided valuable insights into single-phase technology, membrane cryostat technology, and calibration of cryogenic instrumentation. Still, challenges in achieving precise measurements persist due to the space charge effect—the distortion of the electric field within the detector due to the accumulation of positive argon ions generated from constant cosmic muon flux. The overarching goal of this thesis is …

Simplified Molecular Diagnostics Methods For Environmental Testing Of Pathogens And Other Applications, Mohammad Dehghan Banadaki

Theses and Dissertations--Mechanical and Aerospace Engineering

Environmental Surveillance (ES) has emerged as a powerful tool to monitor the emergence and persistence of a pathogen within a facility or community using wastewater/water analysis. Over the past four years, implementation of ES has experienced an explosive acceleration, driven by efforts to monitor the spread of SARS-CoV-2, which has made ES a routinely used public health tool in many locations. We can now use ES to measure the emergence/presence/abundance of different viruses (e.g., SARS-CoV-2, influenza, mpox), bacteria (e.g., E. coli, V. cholerae, antibiotic-resistant strains), fungi (e.g., C. auris), and other biological markers indicative of infectious diseases. However, its broad …