Electro-Mechanical Systems Commons^™

Design Of A Scara Based Mobile 3d Printing Platform, Zachary Hyden

Mechanical Engineering Undergraduate Honors Theses

Currently 3D printers rely heavily on people to run them, there is no automatic way to start a new print after one has finished. On top of this 3D printers are limited in the area they can print on. Even though the additive manufacturing market is rapidly growing and is increasingly being used in product manufacturing there has yet to be a solution to this problem. This research proposes using mobile 3D printing robots to solve both of these issues. The proposed prototype utilizes a Selective Compliance Assembly Robot Arm (SCARA) based robot capable of cooperatively manufacturing parts. This allows …

Novel Low Temperature Cofired Ceramic Manufacturing Techniques For A Magnetron Field Emission Cathode, Daylon Michael Black

Boise State University Theses and Dissertations

Low Temperature Cofired Ceramic (LTCC) is a material system that is ideal for integrated microelectronic packaging technology, because of its rapid prototyping and easy integration of passive components such as resistors, capacitors, and conductors. LTCC’s electrical properties makes it especially suitable for high frequency applications such as magnetrons. Recently, there has been an increased demand for greater power capacities which is resolved by phase locking multiple low power (inexpensive) magnetrons together to achieve the same power as one high power (expensive) magnetron. The Vacuum Electron Devices (VED) and Ceramic Micro Electrical Mechanical Systems (CMEMS) labs at Boise State University have …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

The Design Of An Innovative Automotive Suspension For Formula Sae Racing Applications, Jared Darius

Senior Honors Theses

This thesis details an analytical approach to an innovative suspension system design for implementation to the Formula SAE collegiate competition. It focuses specifically on design relating to geometry, mathematical modeling, energy element relationships, and computer analysis and simulation to visualize system behavior. The bond graph approach is utilized for a quarter car model to facilitate understanding of the analytical process, then applied to a comparative analysis between two transverse half car models. The second half car model contains an additional transverse linkage with a third damper, and is compared against the baseline of the first half car model without the …

Civilian Acquirer For Fire Safety (Cafs), Antara Das, Marcus Allen, Clark Shaver

Posters

The department of Electronics Engineering Technology (EET) of Pittsburg State University has designed a prototype of an autonomous rover to help firefighters to find lives trapped in a building during an event of fire. The rover prototype has been named CAFS, which is the abbreviated form for Civilian Acquirer for Fire Safety. This device intends to produce the first ever autonomous system to locate, record, and transmit people’s location from within a building to a user outside of the building. According to the National Fire Protection Association (NFPA), on 2017, 72% of the fire that happened in the USA was …

Event-Based Visual-Inertial Odometry On A Fixed-Wing Unmanned Aerial Vehicle, Kaleb J. Nelson

Theses and Dissertations

Event-based cameras are a new type of visual sensor that operate under a unique paradigm. These cameras provide asynchronous data on the log-level changes in light intensity for individual pixels, independent of other pixels' measurements. Through the hardware-level approach to change detection, these cameras can achieve microsecond fidelity, millisecond latency, ultra-wide dynamic range, and all with very low power requirements. The advantages provided by event-based cameras make them excellent candidates for visual odometry (VO) for unmanned aerial vehicle (UAV) navigation. This document presents the research and implementation of an event-based visual inertial odometry (EVIO) pipeline, which estimates a vehicle's 6-degrees-of-freedom …

Micro-Contacts With 3-D Surfaces Made With Grayscale Lithography, Paul L.J. Michaud

Theses and Dissertations

MEMS switches show advantages over FET transistors and PIN diodes for switching applications due to low contact resistance, high linearity, low power use, better isolation and lower insertion loss. The switches have not replaced FETs or PIN diodes due to perceived limitations in their reliability and the need for stable contact resistance. In order to create switches acceptable for industry applications, research on micro-contact physics and failure mechanisms of micro-contacts is necessary to develop durable contact surfaces. The aim of this research was to design and fabricate micro-contacts with three-dimensional surfaces using grayscale lithography. The goal was to create devices …

A Mems Dual Vertical Electrometer And Electric Field-Mill, George C. Underwood

Theses and Dissertations

Presented is the first iteration of a Microelectromechanical System (MEMS) dual vertical electrometer and electric field-mill (EFM). The device uses a resonating structure as a variable capacitor that converts the presence of a charge or field into an electric signal. Previous MEMS electrometers are lateral electrometers with laterally spaced electrodes that resonate tangentially with respect to each other. Vertical electrometers, as the name suggests, have vertically spaced electrodes that resonate transversely with respect to each other. The non-tangential movement reduces damping in the system. Both types demonstrate comparable performance, but the vertical electrometer does so at a fraction of the …

Cal Poly Supermileage Electric Vehicle Drivetrain And Motor Control Design, Clarisa Joy Howe, Christopher Joseph Mclaughlin, Erik Alvarado, Enyi Liang

Mechanical Engineering

The Cal Poly Supermileage Vehicle team is a multidisciplinary club that designs and builds high efficiency vehicles to compete internationally at Shell Eco-Marathon (SEM). Cal Poly Supermileage Club has been competing in the internal combustion engine (ICE) category of the competition since 2007. The club has decided it is time to expand their competition goals and enter their first battery electric prototype vehicle. To this end, a yearlong senior design project was presented to this team of engineers giving us the opportunity to design an electric powertrain with a custom motor controller. This system has been integrated into Ventus, the …

Composite Recycler: Frame, Alfonso Olivera

All Undergraduate Projects

How can composites be recycled? The Composite Recycler is an ongoing project that started in September 2017. The purpose of this project was to create a machine that will delaminate the composites, cut them, and heat them up to separate the resin from the composites so they can be recycled. A group was put together for the 2018-2019 academic year to further the project as a whole improve the operation of the device. The existing base was used as well as the cutter and the power sources. The upgrades included; a housing to support the transport rollers and changing from …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

Development Of A Sensing System For Underground Optic Fiber Cable Conduit Mapping, Sherif Bakr

All Graduate Theses, Dissertations, and Other Capstone Projects

The motivation of this research is to obtain an accurate three-dimensional (3D) layout of an underground conduit, which may be beneficial to optic fiber cable installers and engineers. A newly designed algorithm for 3D position tracking with the help of an inertial sensor and an encoder has been developed. Two types of representations (Euler angle and Quaternion) for orientation and rotation are also introduced, followed by several data pre-processing procedures. A sensing fusion method is utilized to overcome the accumulated errors introduced by the sensor drifting. Considering the application of 3D underground duct mapping in this research, a sensing system …

Indoor-Wireless Location Techniques And Algorithms Utilizing Uhf Rfid And Ble Technologies, Ann M. Whitney

Theses and Dissertations--Mechanical and Aerospace Engineering

The work presented herein explores the ability of Ultra High Frequency Radio Frequency (UHF RF) devices, specifically (Radio Frequency Identification) RFID passive tags and Bluetooth Low Energy (BLE) to be used as tools to locate items of interest inside a building. Localization Systems based on these technologies are commercially available, but have failed to be widely adopted due to significant drawbacks in the accuracy and reliability of state of the art systems. It is the goal of this work to address that issue by identifying and potentially improving upon localization algorithms.

The work presented here breaks the process of localization …

Design, Development, And Testing Of A Miniature Fixture For Uniaxial Compression Of Ceramics Coupled With In-Situ Raman Spectrometer, Ryan Jordan

Electronic Theses and Dissertations

This thesis is about the design, development and integration of an in-situ compression stage which interfaces through the Leica optical microscope coupled with a Renishaw InVia micro-Raman spectrometer. This combined compression stage and Raman system will enable structural characterization of ceramics and ceramic composites. The in-situ compression stage incorporates a 440C stainless steel structural components, 6061 aluminum frame, a NEMA 23 stepper motor. Two load screws that allow to apply compressive loads up to 14,137 N, with negligible off axis loading, achieving target stresses of 500 MPa for samples of up to 6.00 mm in diameter. The system will be …

Piezoresistive Behavior Of Carbon Nanopaper Polymer Composites For Strain Sensing, Jayden Beyrooti

Electronic Theses and Dissertations

Carbon nanopapers made of carbon nanotubes (CNTs) or carbon nanofibers (CNFs), possess unique electrical, thermal and mechanical properties and when integrated with a polymer matrix, can become a multifunctional composite capable of strain sensing and heat actuation. Smart structures such as these can be used in many applications including deployable space structures, human motion detection, and structural health monitoring as flexible, sensitive and stable strain sensors in addition to providing electrical heat actuation for the shape memory effect in polymers. This study focuses on strain sensing capabilities by developing a numerical model to predict piezoresistive behavior. The piezoresistive effect is …

Optimal Power Flow Control Of Networked Dc Microgrids, Eddy H. Trinklein

Dissertations, Master's Theses and Master's Reports

The US military is moving toward the electrification of many weapon systems and platforms. Advanced weapon systems such as high energy radar, electro-magnetic kinetic weapons and directed energy pose significant integration challenges due to their pulsed power electrical load profile. Additionally, the weapons platforms, including ships, aircraft, and vehicles can be studied as a mobile microgrids with multiple generation sources, loads, and energy storage. There is also a desire to extend the mission profile and capabilities of these systems. Common goals are to increase fuel efficiency, maintaining system stability, and reduce energy storage size as typically required to enable pulsed …

Non-Marginal Decisions: A Novel Bayesian Multiple Testing Procedure, Noirrit Kiran Chandra, Sourabh Bhattacharya

Journal Articles

In this paper, we consider the problem of multiple testing where the hypotheses are dependent. In most of the existing literature, either Bayesian or non-Bayesian, the decision rules mainly focus on the validity of the test procedure rather than actually utilizing the dependency to increase efficiency. Moreover, the decisions regarding different hypotheses are marginal in the sense that they do not depend upon each other directly. However, in realistic situations, the hypotheses are usually dependent, and hence it is desirable that the decisions regarding the dependent hypotheses are taken jointly. In this article, we develop a novel Bayesian multiple testing …

Exoskeleton Leg Brace, Aaron Indermuhle, Magomed Kasumov, Cevat Bagcioglu, Lucas Battaglia

Williams Honors College, Honors Research Projects

This report details the design process of a lower limb exoskeleton leg brace for elderly people with walking disabilities or others with disabilities that limit mobility. While there are other similar products on the market, the general design can be improved and these improvements have been implemented into the design presented within. Among these improvements are progress in efficiency, weight, user comfort, and cost. The results of the study are the design of a novel leg brace that improves on existing designs in each of these areas.

Our design solution incorporates the use of a single leg brace with no …

Reactive Archey Target Design Team "Mimic", Brandon Croyle, Jacob Boss, David Rodgers, Austin Wivell

Williams Honors College, Honors Research Projects

This design project will aim to provide archery hunters with a platform to simulate shooting at string jumping deer. String jumping refers to a spooked deer hearing the snap of a bow string and instintivly ducking up to ten inches. This often results in wounded or missed deer. We will design and build a control system that uses the sound of a bow string as a trigger to operate a mechanical target system. A sound sensor will mimic a deer’s hearing in close range hunting and then send a signal to the mechanical system to replicate the dropping motion of …

Expendable 3d Printed Rescue Drone, Matthew Chapman, Nathan Knutty, Matthew Chapman

Williams Honors College, Honors Research Projects

This project team designed a 3D printed, expendable drone capable of flying for 80 minutes with a 5 lb payload in order to deliver rescue supplies to individuals in distress.

Power Wheelchair Canopy, Mohamed F. Battah, Joshua D. Brown, Dujuan J. Mcclendon, Gavin M. Francisco

Williams Honors College, Honors Research Projects

Some power wheelchair users can not drive and independently hold an umbrella at the time because they do not have much upper body strength. Therefore, users are unprotected from the rain and are getting soaking wet. One of the members of this group is in a wheelchair and faces this problem. He has previously searched for something to protect him from rain, but could not found something he could independently use. What users need is a powered umbrella that attaches to their power wheelchair. There is no such umbrella available in the market. In this project, the solution to this …

Remotely Controlled Industrial Robotic Arm And Simulation Of Automated Thermal Furnace, Prince Mehandi Ratta

Dissertations, Master's Theses and Master's Reports

The right execution of controllers ensures the correct analysis of information, generating efficient results and better optimizing the system. In this report, two controllers were designed. Firstly, a remotely controlled robotic arm, since there are no such type commercially available controllers. Moreover, robotic platforms are costly, so students and researchers are often unable to learn the concepts of programming industrial robots. This project makes a non-destructive, remotely-controlled robotic arm to better teach students and researchers about programming and control of robotic arms. Secondly, simulation of an automated thermal furnace for ArcelorMittal on SIMULINK, which is used for the annealing process …

Networked Microgrid Optimization And Energy Management, Robert S. Jane

Dissertations, Master's Theses and Master's Reports

Military vehicles possess attributes consistent with a microgrid, containing electrical energy generation, storage, government furnished equipment (GFE), and the ability to share these capabilities via interconnection. Many military vehicles have significant energy storage capacity to satisfy silent watch requirements, making them particularly well-suited to share their energy storage capabilities with stationary microgrids for more efficient energy management. Further, the energy generation capacity and the fuel consumption rate of the vehicles are comparable to standard diesel generators, for certain scenarios, the use of the vehicles could result in more efficient operation. Energy management of a microgrid is an open area of …

Development Of Electromagnetic Friction Dampers For Improving Seismic Performance Of Civil Structures, Mohsen Amjadian

Dissertations and Theses

Energy dissipation is critical to limiting damage to civil structures subjected to extreme natural events such as earthquakes. Friction is one of the most reliable mechanisms of energy dissipation that has been utilized extensively in friction dampers to improve seismic performance of civil structures. Friction dampers are well-known for having a highly nonlinear hysteretic behavior caused by stick-slip motion at low velocities, a phenomenon that is inherent in friction and increases the acceleration response of the structure under control unfavorably, in spite of the fact that the displacement is generally reduced because of the energy dissipation. This increase in acceleration …

Hydrogen Fuel Cell Gasket Handling And Sorting With Machine Vision Integrated Dual Arm Robot, Devin C. Fowler

College of Graduate Studies: Theses & Dissertations

Recently demonstrated robotic assembling technologies for fuel cell stacks used fuel cell components manually pre-arranged in stacks (presenters), all oriented in the same position. Identifying the original orientation of fuel cell components and loading them in stacks for a subsequent automated assembly process is a difficult, repetitive work cycle which if done manually, deceives the advantages offered by automated fabrication technologies of fuel cell components and by robotic assembly processes. We present an innovative robotic technology which enables the integration of automated fabrication processes of fuel cell components with robotic assembly of fuel cell stacks into a fully automated fuel …