Electro-Mechanical Systems Commons^™

Robotic Turret, Daniel Romero, Matthew (Matt) Martelle, Scott Mullens, Rachel Diamant

Mechanical Engineering

No abstract provided.

Quantification Of Stochastic Uncertainty Propagation For Monte Carlo Depletion Methods In Reactor Analysis, Quentin Thomas Newell

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Monte Carlo method provides powerful geometric modeling capabilities for large problem domains in 3-D; therefore, the Monte Carlo method is becoming popular for 3-D fuel depletion analyses to compute quantities of interest in spent nuclear fuel including isotopic compositions. The Monte Carlo approach has not been fully embraced due to unresolved issues concerning the effect of Monte Carlo uncertainties on the predicted results.

Use of the Monte Carlo method to solve the neutron transport equation introduces stochastic uncertainty in the computed fluxes. These fluxes are used to collapse cross sections, estimate power distributions, and deplete the fuel within depletion …

Linear Electromagnetic Energy Scavenging Device Designed In Low Temperature Co-Fired Ceramics, Hope A. Bateman

Boise State University Theses and Dissertations

For a soldier deployed in a remote location on the earth or a recreational hiker in the wilderness or a wild land firefighter battling a destructive wildfire, access to a power source is problematic. Local and regional communication systems, navigation, lights, imaging: all of these require a power source. For short time periods, batteries may be sufficient but with extended time periods the weight of the batteries and cost of replacement becomes a problem. Energy scavenging devices could fill this need and be used as a secondary power source when solar or batteries are not available.

A linear electromagnetic generator …

Floating Tube Heat Exchangers, Patrick Harris, Christina Gedeon, Leonel Medrano, George Milam

Mechanical Engineering

With the slowly diminishing supply of fossil fuels across the world and the heightened risk of carbon dioxide pollution leading to global warming, a shift towards renewable energy is gaining momentum. Recent advances in wind and solar power technology have increased the power density of alternative sources while decreasing the cost per kilowatt-hour, but the technology has not become advanced enough yet for large scale deployment. Combined Power Cooperative has developed a revolutionary design for a concentrated solar power plant that utilizes Fresnel reflectors and a large body of water in which to install them. In addition to being low-cost, …

Vibration-Based Health Monitoring Of Multiple-Stage Gear Train And Differential Planetary Transmission Involving Teeth Damage And Backlash Nonlinearity, Andrew Patrick Sommer

Master's Theses

The objective of this thesis is to develop vibration-based fault detection strategies for on-line condition monitoring of gear transmission systems. The study divides the thesis into three sections. First of all, the local stresses created by a root fatigue crack on a pinion spur gear are analyzed using a quasi-static finite element model and non-linear contact mechanics simulation. Backlash between gear teeth which is essential to provide better lubrication on tooth surfaces and to eliminate interference is included as a defect and a necessary part of transmission design. The second section is dedicated to fixed axis power trains. Torsional vibration …

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

Understanding The Role Of A Bio-Inspired Surface Modification For Delayed Icing, Clayton Schenk

Graduate Theses and Dissertations

Atmospheric icing event is problematic for outdoor structures because it can damage, slow, impede, and danger general routine. For a wind turbine blade, it can damage, disrupt movement, and cause potentially dangerous ice throw. Anti-icing based on a surface texture is advantageous due to the low cost of maintenance and there is no additional requirement of energy output for preventing the icing problem. This work is based on the biomimicry of the superhydrophobic nature of the lotus leaf, whereas the limited wettability supports the water to flow freely from the surface structure. The phenomenon is based on a morphology and …

A Solid State Nitrogen Gas Generating Chip And Applications For Picosatellites, Kyle Godin

Graduate Theses and Dissertations

A microscale gas generating chip has many applications; in this study, applications relating to picosatellites have been considered. Cube satellites, a type of picosatellite, are of mass around one kilogram and side length 10cm x 10cm x 10cm. Their launches are becoming more numerous since their debut ten years ago. Their low cost and deployment system makes space accessible to agencies hitherto barred from it, such as universities and small governments. However, their power, mass, and volume budget is extremely tight. A microscale gas chip could compete with other designs for attitude control devices, most not flown yet as cube …

Automating The Fret Slotting Process Using A Plc Controlled 1.5 Axis Mill, James Stratton

Purdue Polytechnic Masters Theses

Stratton, James A. M.S., Purdue University, August 2011. Automating the Fret Slotting Process Using a PLC Controlled 1.5 Axis CNC Mill. Major Professor: Richard Mark French.

Can automation assist small job shops and hobbyists in the production of stringed instruments? This research set out to answer the question using a quantitative approach to determine if an economical CNC machine could be produced in such a fashion as to seamlessly join the workshop as an affordable, yet precise instrument to aid in the production of stringed instruments. The key was to incorporate common industrial automation equipment into the operation of the …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Reconfigurable Sampling For Enhanced Energy Efficiency In Power-Constrained Wireless Systems, Timothy Kurp

Master's Theses

Advancement in microelectronics and wireless communications has nurtured the development of low power and low cost wireless systems such as sensor networks. Each node is typically driven by a battery, which has a limited energy capacity that directly constrains node, and network lifetime. This presents a bottleneck for the widespread exploitation of wireless sensing technology. Therefore, improving the energy efficiency of wireless sensing devices is of critical importance and has attracted the attention of the research community.

In this work, a data-driven method has been proposed and systematically investigated. Specifically, this technique reconfigures, in real time, the rate of data …

Thrust-Vector Control, Dane Larkin, Harsimran Singh

Mechanical Engineering

Mission Statement

The purpose of this project is to design, build, and test a thrust-vectoring rocket nozzle which will aid in controlling the trajectory of a solid-booster rocket. The system prototype must meet the requirements set forth by the sponsoring enterprise.

The Enterprise

Stellar Exploration is a small space systems technology company located in San Luis Obispo, CA. Stellar Exploration is currently seeking a thrust-vectoring system for its Silver Sword rocket.

Project Scope

The design and analysis portion of this project accounted for a system that would be mounted on to a rocket for operational flight. Therefore, this team has …

Structure Climbing Monkey Robot, Paul Bessent

Master's Theses

This report describes the design, building, and testing of the Structure Climbing Monkey Robot (SCMR). It is composed of seven successive joints and linkages with two grippers at the two ends. Each gripper can act as the base or the end of the robot. The SCMR has the ability to climb any structure. The gripper plates can be changed to grab different kinds of structures, but this one is made to grab 2x4‘s. A program was written to assist the user to grab four non-coplanar, non-orthogonal points.

The SCMR is actuated by a total of nine motors: two to open …

Power Steering Concept, Anthony N. Escobedo, William Ryan Flores, Russell Haverstock

Mechanical Engineering

This senior project was created in conjunction with Edwards Lifesciences. This project was created under an non-disclosure agreement and will not be submitted to any outside sources. The submitted title page will act as proof of completion.

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Rapid Animatronic Target System, Brandon Keith Bray, Matt Gerhardt Guise, Martin Thomas Quinn

Mechanical Engineering

No abstract provided.

Effects Of Inlet Conditions On Diffuser Outlet Performance, Zaccary A. Poots

UNLV Theses, Dissertations, Professional Papers, and Capstones

Building air distribution terminal system designers and system installers require accurate quantitative information on the performance of the installed system to achieve optimum efficiency and levels of human comfort. This requires field installation adjustment values from published ideal pressure loss, air distribution and sound generation installation performance. This study documents the air output performance of different installation configurations of six types of ceiling diffusers and compares the results to performance when installed according to ANSI/ASHRAE Standard 70-2006. A diffuser inlet supply plenum was designed for optimum flow and used to acquire a baseline set of data covering the six types …

Geomagnetic Compensation For Low-Cost Crash Avoidance Project, John C. Torres

Master's Theses

The goal of this work was to compensate for the effects of the Earth’s magnetic field in a vector field magnetic sensor.  The magnetic sensor is a part of a low-cost crash avoidance system by Stephane Roussel where the magnetic sensor was used to detect cars passing when it was mounted to a test vehicle.  However, the magnetic sensor’s output voltage varied when it changed orientation with respect to the Earth’s magnetic field.  This limited the previous work to only analyze detection rates when the test vehicle travelled a single heading.  Since one of the goals of this system is …

Shaped Mems Contact, Ronald A. Coutu Jr., Paul E. Kladitis, Robert L. Crane

AFIT Patents

A MEMS switch fabrication process and apparatus inclusive of a bulbous rounded surface movable contact assembly that is integral with the switch movable element and achieving of long contact wear life with low contact electrical resistance. The disclosed process is compatible with semiconductor integrated circuit fabrication materials and procedures and includes an unusual photoresist reflow step in which the bulbous contact shape is quickly defined in three dimensions from more easily achieved integrated circuit mask and etching-defined precursor shapes. A plurality of differing photoresist materials are used in the process. A large part of the contact and contact spring formation …

Electromagnetic Modeling And Measurement Of Adaptive Metamaterial Structural Elements, Matthew E. Jussaume

Theses and Dissertations

This document addresses two major obstacles facing metamaterial development: uncertainty in the characterization of electromagnetic field behavior in metamaterial structures and the relatively small operational bandwidth of metamaterial structures. To address the first obstacle, a method of prediction aided measurement is developed and exploited to examine the field interactions within metamaterial devices. The fusion of simulation and measurement techniques enhances the understanding of the physical interactions of fields in the presence of metamaterials. To address the second obstacle, this document characterizes the effectiveness of an adaptive metamaterial design that incorporates a microelectromechanical systems (MEMS) variable capacitor. Applying voltages to the …

High-Resolution, Non-Contact Angular Measurement System For Psa/Rsa, Ronald D. Sloat

Master's Theses

A non-contact angular measurement system for Pitch Static Attitude (PSA) and Roll Static Attitude (RSA) of hard disk drive sliders is designed and built. Real-time sampling at over 15 KHz is achieved with accuracy of +/- 0.05 degrees over a range of approximately 2-3 degrees. Measuring the PSA and RSA is critical for hard drive manufacturers to control and improve the quality and reliability of hard drives. Although the hard drive industry is able to measure the PSA and RSA at the subassembly level at this time, there is no system available that is able to measure PSA/RSA at the …

High Conductivity Solid Oxide Electrolyte Composite-Laminates Utilizing Scandia/Ceria Co-Doped Zirconia Core With Yttria Stabilized Zirconia Outer Skins, Jay Neutzler, Xinyu Huang, Joshua Sightler, Yan Chen, Nina Orlovskaya

Faculty Publications

Increasing the conductivity of electrolytes in lower temperature Solid Oxide Fuel Cells (SOFC) is of great importance. However, there are several challenges that are to be addressed, which include phase stability of electrolyte’s crystal structure, chemical stability in both oxidizing and reducing environments, and maintaining mechanical integrity and high ionic conductivity over time.