Electro-Mechanical Systems Commons^™

The Influence Of Branches In The Performance Of Power-Line Communication Systems That Use Mc-Coma With Reed Solomon Coding, Emmanuel Felix

Tanzania Journal of Engineering and Technology (TJET)

Power-line network is proposed as an infrastructure for Information and Communications Technologies (ICTs)
services provision. However, there are a number of factors that contribute greatly to power-line communication performance degradation. These include number of branches that can be added or removed from the power- line network, lengths of the branch lines, loading etc. It has been pointed out that the number of branches is one of the factors that affects power-line performance to a certain extent. In this paper the influence of number of branches on the performance of Broadband Power-line communication (BPLC) that uses MC- CDMA modulation scheme with …

Investigation Into Contact Resistance And Damage Of Metal Contacts Used In Rf-Mems Switches, Kevin W. Gilbert

Theses and Dissertations

This research examines the physical and electrical processes involved in lifecycle failure of Microelectromechanical (MEMS) Radio-Frequency (RF) cantilever beam ohmic contact switches. Failures of these switches generally occur at the contact, but complete details of performance of microcontacts are difficult to measure and have not been previously reported. This study investigated the mechanics of microcontact behavior by designing and constructing a novel experimental setup. Three representative contact materials of varying microstructure (Au, Au5%Ru, Au4%V₂O₅) were tested and parameters of contact during cycling were measured. The Au4%V₂O₅, a dispersion strengthened material developed at …

Shaped Mems Contact, Ronald A. Coutu Jr., Paul E. Kladitis, Robert L. Crane

AFIT Patents

A MEMS switch fabrication process and apparatus inclusive of a bulbous rounded surface movable contact assembly that is integral with the switch movable element and achieving of long contact wear life with low contact electrical resistance. The disclosed process is compatible with semiconductor integrated circuit fabrication materials and procedures and includes an unusual photoresist reflow step in which the bulbous contact shape is quickly defined in three dimensions from more easily achieved integrated circuit mask and etching-defined precursor shapes. A plurality of differing photoresist materials are used in the process. A large part of the contact and contact spring formation …

On-Line Realtime Water Quality Monitoring And Control For Swimming Pools, Paul Duffy, Gerard Woods, Sean O'Hogain, James Walsh, C. Caplier

Conference Papers

Effective swimming pool water quality monitoring and control systems are important to safeguard public health and for bather comfort. Most Irish swimming pool monitoring systems rely heavily on manual methods for sampling, testing and data recording of important parameters. Microbiological testing is infrequent and results can often take days. The goal of this research is to develop a water quality monitoring and control system with real time data logging, automatic data analysis, remote monitoring and control, microbiological sampling capabilities and online connectivity. National Instruments hardware and its software package LabView form the basis of the monitoring and control system. Several …

Development Of A Low Cost Handheld Microfluidic Phosphate Colorimeter For Water Quality Analysis, Sean C. Kaylor

Master's Theses

This thesis describes the design, fabrication, and testing process for a microfluidic phosphate colorimeter utilized for water quality analysis. The device can be powered by, and interfaced for data collection with, a common cell phone or laptop to dramatically reduce costs. Unlike commercially available colorimeters, this device does not require the user to measure or mix sample and reagent. A disposable poly(dimethylsiloxane) (PDMS) microfluid chip, powered by an absorption pumping mechanism, was used to draw water samples, mix the sample at a specific ratio with a molybdovanadate reagent, and load both fluids into an onboard cuvette for colorimetric analysis. A …

Stability Analysis, Modeling, Simulation And Experimental Testing Of An Ems Maglev System With Structural Flexibility, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

Vehicle-guideway interaction studies of Magnetically Levitated (Maglev) vehicles indicate that structural flexibility can adversely affect the overall stability and performance of such systems. This is one of the reasons why guideways are generally made very rigid. This in turn leads to increased cost of the overall system since guideway construction forms a significant portion of the overall cost. In this dissertation, the influence of structural flexibility on the stability of Electromagnetic Suspension (EMS) Maglev systems is studied. It is shown how inherently unstable and flexible structure EMS Maglev systems can achieve guaranteed stability by using collocated actuators and sensors, along …

Electro Mechanical Actuator Test Stand For In-Flight Experiments, Michael Koopmans, Catlin Mattheis, Austin Lawrence

Mechanical Engineering

The Prognostic Center of Excellence at NASA Ames is currently researching actuator prognostics, specifically in the application of electro mechanical actuators (EMA’s). Cal Poly ME students Michael Koopmans and Catlin Mattheis and EE student Austin Lawrence have chosen to undertake the task of building a test stand that will be flown in flight while testing EMA’s specific faults. A stand was designed to fit inside a standard 19” rack, take power from the aircraft 3 EMA’s, a computer, data acquisition, and electric magnets switches are powered. A MIL STD 1553 interface is present to allow fault injection. Vibration and temperature …

Advanced Design And Performance Characterization Of A Micromachined Tuning-Fork Gyroscope With High Quality Factors, Shiva Krishna Durgam

Mechanical & Aerospace Engineering Theses & Dissertations

Over the past two decades, micromachined gyroscopes fabricated using MicroElectroMechanical Systems (MEMS) technology have attracted a great deal of attention from various industrial and military sectors due to their significant advantages over traditional bulky gyroscopes, including small size, batch fabrication, low power consumption, and low cost. Among the various micromachined gyroscopes developed so far, tuning-fork gyroscopes with integrated electrostatic transducers have been extremely attractive because of their significant advantages over other structural forms and other types of transducers., including larger proof mass, large vibration amplitude in the drive-mode, and relative ease of fabrication.

This thesis presents the advanced design and …

The Design And Verification Of A Mems Combustor Chamber, Constance Yvonne Meadors

Theses and Dissertations

A pre-combustion micro-mixing chamber has been designed as a component of the University of Arkansas at Little Rock's (UALR) proposed complete microelectromechanical (MEMS) hybrid rocket on a silicon chip. A MEMS pre-combustion mixer allows identification of pressures and flow rates for stochiometric mixing of combustion gases. The pre-combustion mixer has been designed to interface with a mass spectrometer for detection and characterization of combustion reactants and products as the first stage of a UALR hybrid micro-thruster. This research focuses on the design, fabrication, and validation of a pre-combustion micro-mixer that satisfies the requirements of MEMS micro-spacecraft and operates in space …

Abatteuses Forestières : Dispositif Et Circuits De Commande Relatifs À La Sécurité, Laurent Giraud, Yuvin Chinniah, Damien Burlet-Vienney, Joseph-Jean Paques, Marina Koutchouk, Renaud Daigle

Rapports de recherche scientifique

Les abatteuses forestières sont des engins tout-terrains conçus pour évoluer en forêt, qui servent de véhicule moteur pour déplacer une tête d’abattage.

L’utilisation d’abatteuses avec une tête d’abattage multifonctionnelle s’est largement répandue au Québec ces dernières années pour deux raisons :

• Cette méthode d’abattage réduit la machinerie car une seule machine tronçonne et façonne les arbres en billots, là où il en fallait plusieurs avec les anciennes méthodes;
• La méthode d’abattage abîme moins le sol de la forêt car le façonnage des arbres se fait sur place et crée ainsi un tapis végétal.

L’IRSST a lancé une série d’études sur …

Modeling Of The Interior Electric Field In Photovoltaic Cells, Tara Jeatran

The Journal of Undergraduate Research

With the emergence of photovoltaic technologies, there is a strong technological demand for high-performance photovoltaic devices. One of the most promising device concepts developed at SDSU is organic-based photovoltaic cells. The performance of the PV cells is controlled by charge generation and charge separation, and charge transportation processes. Extraordinary control over the properties of the organic photovoltaic materials will be needed in order for this research to succeed. Therefore, the interior electric field and the macro electric properties of the system are the foundation behind these facts and are critical properties on their performance. In this paper, the fundamentals of …