Electro-Mechanical Systems Commons^™

Ion Irradiation Of Microelectromechanical Resonators, Hengky Chandrahalim, David D. Lynes

AFIT Patents

A method of enhancing an electromechanical coupling coefficient of a microelectromechanical (“MEMS”) device. The method includes applying, to a fully fabricated MEMS device, heavy particle ion radiation to the MEMS device at a fluence of at least 1×10¹⁴ cm.⁻². According to other embodiments of the present invention are directed to a bandpass filter comprising a plurality of MEMS devices fabricated in accordance with the methods provided. The MEMS of the plurality are electronically or mechanically coupled.

Evolution Of Polypyrrole Electrode During Electropolymerization And Its Effect On Energy Storage Performance, Duy Pham, Ryan Tcheutchoua Gouafong, Jake Irvin, Ben Mckinney, Jacob Dileonardi, Mason Cox, Ashish Aphale

Faculty Articles

This study investigates the influence of electropolymerization time on the evolution of morphology and the electrochemical performance of polypyrrole (PPy) electrodes. The PPy films were synthesized by varying the deposition time from 300 seconds to 1800 seconds, corresponding to 5 to 50 cycles. The electrodes were characterized by Raman spectroscopy, XPS, and SEM, and electrochemical analyses were conducted using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge (GCD). Experimental results showed that increasing deposition time yields large cauliflower-like structures, thereby enhancing capacitance. The 50 cycle electrode exhibited the highest specific capacitance of 412 F/g in a three-electrode configuration …

Assessment Of Advanced Glazing Systems For Building Energy Efficiency In Hot-Arid Climates, Ahmad I. Elshamy, Yousef Elgefly, Yara El-Metwally, Serag Salem

Architectural Engineering

The built environment is considered among the most contributing factors to energy consumption. The building envelope plays a crucial role in determining the building energy consumption, regulating heat transfer and maintaining adequate indoor environmental quality. Hence, optimizing the thermal performance of the building envelope by achieving optimal glazing solutions while fulfilling the Sustainable Development Goal (SDG 7) is the main aim of this research. This study investigates the impact of various facade glazing systems on the building energy performance, focusing on the cooling energy consumption of an office building in a hot arid climate, Cairo, Egypt. The novelty of this …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Residential Hvac Installation Faults: Field Prevalence, Drivers, And Energy Impacts, Seyed Ali Rooholghodos

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Faults in residential comfort systems can have detrimental effects on the performance of the system, reducing the energy efficiency, affecting indoor comfort, and shortening equipment lifespan. Many of the faults occur at installation. However, there has not previously been a systematic and nationally representative study to indicate the prevalence of the faults, meaning the distribution of faults by fault type and fault intensity. Understanding true fault prevalence is essential to be able to identify derivers, and to assess the incremental electricity consumption of the new installation systems.

This study presents on-site data from 341 new central cooling systems—air conditioners and …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Non-Invasive Glucose Monitoring Using Ppg, Ai, And Iot-Driven Mobile Integration For Real-Time Diabetes Management, Mostafa Abdelaziz, Amr Refaie

Mechanical Engineering

Diabetes mellitus patients must regularly monitor their blood glucose levels to manage glycaemia, typically requiring capillary tests at least three times daily and laboratory tests one to two times per month. These conventional methods involve finger pricking, causing significant discomfort and stress. This study introduces an innovative non-invasive glucose monitoring approach by integrating photoplethysmography (PPG) technology with an artificial intelligence (AI) algorithm, complemented by a mobile application using Flutter, IoT systems, and Firebase cloud for real-time data access. Among the AI models tested, polynomial regression demonstrated superior accuracy in glucose prediction, achieving a Mean Squared Error (MSE) of 14.76 and …

Ai-Driven Robotic System For Predictive Maintenance: Urban Road Defect Detection In Smart Cities, Mostafa Abdelaziz, Mahmoud Khedr

Mechanical Engineering

This paper presents the development and evaluation of an integrated AI & robotic solution for predictive maintenance in smart cities, focusing on urban road defect detection. The proposed system integrates a mobile robot equipped with a high-resolution camera and a GPS module to capture video footage and geolocation data of road surfaces. The collected data is processed using cloud-based AI models, with YOLOv9 and Roboflow 3.0 Object Detection (Fast) identified as the most effective for analyzing footage to detect cracks and potholes. Experimental results validate the system's ability to accurately identify defects and generate timely reports for maintenance teams. While …

Development Of A Compliant Soft Gripper With Embedded Force Sensors, Ayman Abbas, Abdelrahman Said, Tamer Kahlil, Mahmoud Magdy

Mechanical Engineering

Robotic manipulators have the capability to perform repetitive tasks with a level of efficiency and precision that exceeds the capabilities of human operators. Currently, they are commonly found and extensively utilized across various disciplines. However, robotic manipulators have gradually begun to make inroads into fields beyond manufacturing, such as medicine and agriculture. Due to the diverse range of industries utilizing robotic manipulators, the nature of tasks assigned to these devices can often be more intricate and multifaceted than conventional assignments. Hence, conventional mechanical grippers may not always be suitable, prompting a growing need for grippers capable of adapting to effectively …

Design Of Modular Soft Gripper For Harvesting, Mostafa Abdelaziz, Ahmed Reda, Abdulrhman Atef, Mahmoud Magdy

Mechanical Engineering

Soft robotics presents a transformative approach to agricultural automation, addressing the limitations of traditional mechanical systems in handling delicate crops. This paper introduces a modular soft robotic gripper designed for gentle harvesting applications, with a focus on adaptability, precision, and crop safety. The gripper's performance was evaluated through Finite Element Analysis (FEA) and experimental testing, targeting its ability to conform to objects of varying shapes, sizes, and fragility. The FEA confirmed the gripper's capability to apply a load based on the gripped crop of the range 0.6 – 0.75 N, sufficient for damage-free harvesting of sensitive produce like strawberries and …

Design And Implementation Of Smart Automation For Sustainable Plastic Recycling With Iot Integration, Mostafa Abdelaziz, Mahmoud Khedr, Amr Bakkar, Yossef Zidan, Abdelrahman Youssef, Mahmoud Magdy

Mechanical Engineering

Plastic pollution poses a critical environmental challenge, infiltrating ecosystems and impacting human health. One innovative solution involves repurposing recycled plastics into interlocking blocks as a sustainable alternative to concrete in construction. However, manual production methods hinder scalability, efficiency, and product consistency while generating material waste. This research addresses these limitations by automating the production process using PLC and IoT technologies. The findings demonstrate that automation significantly enhances production rates, ensures consistent quality, and minimizes waste, thereby improving operational efficiency and environmental sustainability. IoT is integrated to enhance the system's capabilities by providing real-time connectivity and data exchange. The IoT dashboard, …

Pre-Programmable Directional Stiffness In Continuum Robotic Arms: Effects Of Truss Configurations, Mostafa Abdelaziz, Zahy Elgendy, Mahmoud Magdy

Mechanical Engineering

This paper investigates the implementation of trussed designs in modular tendon-driven continuum arms (CAs) to address stiffness and stability limitations while maintaining adaptability. Various truss configurations— Single-Level, Combined-Level, and Alternated trusses—were analyzed using Finite Element Analysis (FEA) to evaluate their impact on flexural and axial stiffness under realistic loading conditions. Results demonstrate that truss placement significantly influences performance, with bottom-level trusses improving flexural stiffness by up to 33%, middle-level trusses enhancing axial stiffness by 43%. Further, Combined-Level configurations provide superior overall stiffness, with MiddleBottom trusses achieving a 66.5% improvement in flexural stiffness and a 70.9% increase in axial stiffness, while …

Investigation Of Conductive Die-Top Thermal Capacitors During Short Circuit Operation Of Silicon Carbide Devices, Youssef Abotaleb

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Silicon carbide (SiC) power devices have garnered significant attention in recent years due to their superior thermal and electrical properties compared to traditional silicon devices. However, SiC power devices suffer from severe reliability issues arising from their mechanical properties. This is because the Young's modulus of SiC is about three times larger than that of silicon, which correspondingly raises the mechanical stresses acting on the bonding structure, often leading to device failure under power shock events.

Traditional packaging materials and designs tend to constrain SiC performance, as hot-spot temperature resulting from a power shock is one of the key factors …

A Case Study On Optimizing Industrial Air Conditioning With Thermal Solar Energy In Egypt, Tamer Adel Mohamed, Hesham Safwat, Mohammed A. Ebaid

Mechanical Engineering

This study investigates the feasibility of implementing a solar-assisted adsorption chiller in an industrial building at the Oriental Weavers International factory located in 10th of Ramadan City, Cairo, Egypt. The objective is to replace an inefficient split air conditioning system currently used to cool the Jacquard units during carpet manufacturing. The research begins by analyzing the performance of the existing cooling system to establish a baseline. It then explores the potential energy savings achievable by replacing the current system with a solar-assisted adsorption chiller. The existing oversized boiler will serve as an auxiliary heater for the new system. TRNSYS simulation …

Implementation Of Explainable Ai For Bearing Fault Classification, Mohammad Mundiwala

Honors Scholar Theses

It is difficult to overstate the impact of artificial intelligence (AI) over the past decade. The rapid expansion of machine learning has stimulated a race to deploy AI in all facets of life, one such domain being machine health monitoring. There is no doubt that machine learning excels in prediction accuracy, but oftentimes, these models are cryptic and fail to provide valuable insight into their decisions. This paper presents an overview of a neural network and what it means to learn. Next, two distinct Explainable AI (XAI) techniques will be presented: Gradient Class Activation Mapping and SimplEx . Finally, these …

Garbage Float, Gabor Papp, Max Woolverton, Scott Ulatowski, Daniel Ross, Nicholas Gayle, Bryan Merchan-Aragon, Noah Yco, Nicholas Fawcett, Jared Wright, Abdulaziz Salman G Alshahrani, Andrew Mcquire

Mechanical and Civil Engineering Student Publications

Trash pileup in our waters is an increasing problem. Removing floating plastics and debris from our ecosystem would reduce mortality rate of marine animals. Solutions for this already exist but most of them are proprietary and expensive. Therefore, an autonomous, publicly available and cheap alternative was developed to skim and clean the water surface from garbage.

Experimental Environmental Profiles And Sloshing Dynamics Aboard Zero-G Aircraft, Pedro J. Llanos, Sathya Gangadharan, Kevin Crosby

Publications

This study presents the results of a parabolic flight experiment to study the sloshing dynamics of the magneto-active propellant management device experiment. This device utilizes a magnetoactive membrane and magnets located external to the tank to effectively damp the liquid free surface motion. This research work establishes a benchmark with sloshing analytical formulation and sensor calibration methods that can be used to characterize future research parabolic flights while providing important environmental profiles measured during flight, such as accelerations, pitch angle, velocity, temperature, total volatile content, carbon dioxide, relative humidity, magnetic field, and radiation. Correlation between these flight variables and the …

Fabrication Of Smooth Sac305 Thin Film Via Magnetron Sputtering, M. Ojha, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

SAC305 (96.5 wt% Sn, 3 wt% Ag, 0.5 wt%Cu) solder is increasingly becoming popular due to its reliability good characteristics and performance in addition to the environmental concerns and regulations that restrict the use of lead in nano/microelectronic products. In nano/microelectronics, manufacturing smooth solder coatings free of defects such as voids and cracks, which can compromise joint reliability is crucial. Magnetron sputtering offers a high degree of control over film thickness and composition, resulting in films with excellent uniformity and adhesion. Despite these advantages, fabricating continuous and robust SAC305 films using magnetron sputtering remains a difficult task with limited research …

Intelligent Thermoregulation In Personal Protective Equipment, Alireza Saidi, Chantal Gauvin

Études primaires

With the prospect of deploying intelligent thermal management in protective equipment, strategies for integrating heating and cooling actuators with modular temperature controls and automatic temperature regulation systems based on feedback from the individual’s personal and environmental parameters are discussed. © 2024 by the authors.

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …

Robotic Origami Worm, Carter Josef, Michael Freeman, Mohammad Hasan

College of Engineering Summer Undergraduate Research Program

Soft robotics can solve many unique engineering problems. The ancient art of origami has inspired design for a new breed of robots. In this research, a novel fold design was created which has high linear stiffness, high bending stiffness, and the ability to deform omnidirectionally in order to turn. The robot is operated using a DC motor to expand and contract and electromagnets to control friction. The robot moves very quickly compared with many other origami robots in the literature. Other interesting ways to control friction were explored including expansion mechanisms. An origami design was created and tested that expands …

A Robust Model Reduction For The Optimal Boundary Feedback Stabilization Of Magnetizable Piezoelectric Beams, Md Rafi As Sadeq Ibn Emran

Masters Theses & Specialist Projects

The one-dimensional Partial Differential Equation (PDE) model of the wave equation, which describes wave dynamics of a wide-range of controlled mechanical systems, with a state feedback controller at its boundary is known to have exponentially stable solutions. Moreover, it is also reported that the several model reductions of the wave equation by the standard Finite Differences and Finite Elements approximations suffer from the lack of exponential stability (and exact observability without a state feedback controller) uniformly as the discretization parameter tends to zero. This is due to the loss of a uniform gap among the high-frequency eigenvalues as the discretization …

Optical Fiber Tip Micro Anemometer, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic flow sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fiber. The three-dimensional microscopic optical structure includes a post attached off-center to and extending longitudinally from the cleaved tip of the optical fiber. A rotor of the three-dimensional microscopic optical structure is received for rotation on the post. The rotor has more than one blade. Each blade has a reflective undersurface that reflects a light signal back through the optical fiber when center aligned with the optical fiber, the blades of the rotor shaped to rotate at a rate related to …

Pla-S-Tech: Pla Sustainable Technology, Sean Sapper, Ryan Decarlo, Elle Whitney, Samantha Dombrowski, Dalton Prokop, Dominic Zaio, Tyler Stokes, David Deese, Blake Hengel, Yi Guo

Mechanical and Civil Engineering Student Publications

To recycle waste material produced by fused deposition modeling (FDM) 3D printers, a recycler was designed and manufactured to convert plastic scraps into usable filament. The device does so by breaking down plastic material to a uniform size with the shredder, melting and compressing these pieces into a cylindrical strand with the extruder, and wrapping this strand around a filament spool with the spooler. As the device is mostly made from commercially-available components, it is easily maintainable and user-serviceable, while also costing less than similar devices on the market.

Flexible Materials And Applications For Wearable Sensors, Brock Ferrari

Senior Honors Theses

This literature review aimed to address the limitations of rigid wearable sensors in the medical community by investigating the development of flexible materials for remote health monitoring. A keyword search was conducted on Google Scholar, PubMed, and the Jerry Falwell Library, which yielded 9,102 articles. After applying filtering techniques, the results were narrowed down to 21 articles, which were categorized into "Present Market Conditions," "Flexible Materials for Medical Use," "Applications for Wearable Sensors," and "Potential Use Cases." Discussions were held on prominent materials such as substrate, nanocomposite, and liquid metal materials, exploring their potential applications for chemical and physical sensing, …

Effect Of Stress Interaction On Multi-Stress Accelerated Life Test Plan: Assessment Based On Particle Swarm Optimization, Ekene Gabriel Okafor, David Ryan Huitink

Mechanical Engineering Faculty Publications and Presentations

Sustainability of products that seek to maintain ecosystem balance, such as electric vehicles or solar system inverters, often require extensive testing during their developmental stages in a manner that minimizes wastage and drives creativity. Multi-stress accelerated test planning is often used for these products, their subsystems and components if their in-service failures are driven by multiple stress factors. Multi-stress accelerated life testing (ALT) often expedites time to failure for highly reliable products. Many studies assume model parameters that may not be appropriate for the considered stress factors. Most importantly, the effect stress interaction has on the ALT plan is often …

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng

Mechanical & Aerospace Engineering Faculty Publications

Electroosmosis is one of the most used actuation mechanisms for the microfluidics in the current active lab-on-chip devices. It is generated on the induced charged microchannel walls in contact with an electrolyte solution. Electrode distribution plays the key role on providing the external electric field for electroosmosis, and determines the performance of electroosmotic microfluidics. Therefore, this paper proposes a topology optimization approach for the electrodes of electroosmotic microfluidics, where the electrode layout on the microchannel wall can be determined to achieve designer desired microfluidic performance. This topology optimization is carried out by implementing the interpolation of electric insulation and electric …

Numerical Study Of The Time-Periodic Electroosmotic Flow Of Viscoelastic Fluid Through A Short Constriction Microchannel, Jianyu Ji, Shizhi Qian, Armani Marie Parker, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) is of utmost significance due to its numerous practical uses in controlling flow at micro/nanoscales. In the present study, the time-periodic EOF of a viscoelastic fluid is statistically analyzed using a short 10:1 constriction microfluidic channel joining two reservoirs on either side. The flow is modeled using the Oldroyd-B (OB) model and the Poisson-Boltzmann model. The EOF of a highly concentrated polyacrylamide (PAA) aqueous solution is investigated under the combined effects of an alternating current (AC) electric field and a direct current (DC) electric field. Power-law degradation is visible in the energy spectra of the velocity fluctuations …

Laser-Scribed Conductive, Photoactive Transition Metal Oxide On Soft Elastomers For Janus On-Skin Electronics And Soft Actuators, Ganggang Zhao, Yun Ling, Yajuan Su, Zanyu Chen, Cherian J. Mathai, Ogheneobarome Emeje, Alexander Brown, Dinesh Reddy Alla, Jie Huang, Chansong Kim, Qian Chen, Xiaoqing He, David Stalla, Yadong Xu

Electrical and Computer Engineering Faculty Research & Creative Works

Laser-assisted fabrication of conductive materials on flexible substrates has attracted intense interests because of its simplicity, easy customization, and broad applications. However, it remains challenging to achieve laser scribing of conductive materials on tissue-like soft elastomers, which can serve as the basis to construct bioelectronics and soft actuators. Here, we report laser scribing of metallic conductive, photoactive transition metal oxide (molybdenum dioxide) on soft elastomers, coated with molybdenum chloride precursors, under ambient conditions. Laser-scribed molybdenum dioxide (LSM) exhibits high electrical conductivity, biocompatibility, chemical stability, and compatibility with magnetic resonance imaging. In addition, LSM can be made on various substrates (polyimide, …