Electro-Mechanical Systems Commons^™

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Controlled Radiation Capsule For Precision And Rapid Cancer Treatment, Hoseon Lee, Zsolt Kollar, Bailey R. White, Junia Nguyen, David Roque, Sowjanya Palagani

Symposium of Student Scholars

This research aims to transform cancer treatment through the optimization of brachytherapy, with a focus on reducing treatment duration, setup complexities, and financial burdens, all while emphasizing patient safety. Patients living at a distance from radiation clinics, particularly those undergoing extended Low Dose Radiation brachytherapy, often struggle with the formidable financial challenges associated with securing nearby accommodations. In response to these issues, the research introduces a radiation capsule designed to condense the conventional six-month treatment period to approximately just one week, thereby significantly reducing the duration of required accommodations. This capsule is especially relevant considering the construction cost of $40 …

Damage Identification In 3d Printed Metal Parts Using Deep Learning, Romaine Byfield, Alireza Modir, Ibrahim Tansel, Raniero Plaza

Florida Conference on Recent Advances in Robotics

An active Structural Health Monitoring (SHM) method called Surface Response to Excitation (SuRE), is used in this study to detect and quantify the damages created by a milling operation on additively manufactured metal plates. This method entails bonding two piezoelectric disks to the test specimens, one to excite it with surface waves from one end of the plate, and the other to sense the dynamic response to excitation at the other end. A sweep sine wave with a duration of 1 ms, ranging from 50-120 kHz is used as the excitation signal. Five stainless steel plates of identical size (195×54×2.5 …

Assistive Robotic Platform For Non‐Urgent Household Tasks: A New Design, Amanda Serger, Normandy Tanguilan, Hakki Erhan Sevil

Florida Conference on Recent Advances in Robotics

Humans overcome minor household inconveniences daily without fully recognizing how challenging these tasks could be for individuals such as elderly people or people with disabilities. Those people often times struggle to complete tasks, for instance opening a door or reaching for an item, leading them to rely on caregivers for help. During the COVID-19 pandemic, this caregiver support becomes an unsafe and unreliable solution that can result in a greater risk, thus the need for another solution arises: robotic technology. Recent developments in the robotics field have paved the way for this research, aiming to design a home assistance robot …

Autonomous Navigator Mobile Robot Upgrade, David Sansoucy

Thinking Matters Symposium

The mobile robot platform has been developed over the course of 10 years at USM. In Spring 2020, Belle-Isle and Werner updated the previous framework by rewriting the software to use the ROS framework running on an on-board Raspberry Pi 3. They also implemented navigation using an A* motion planning algorithm and image processing. In Summer 2021, Ames incorporated Lidar and Kinect sensors onto the robot to improve its real-time navigation capabilities. He also made improvements to the power distribution systems. This project aimed to build on the ROS frameworks developed by the previous 2 teams with the main goal …

Development Of A Compliant Gripper Driven By 3 Dof Soft Robot, Derek M. Price Ii, Ricardo Ramirez, Pt Angel Tran

Symposium of Student Scholars

Industrial robots are moving toward automation, which makes it increasingly necessary to replace the functions traditionally performed by humans with robotics. Pick and place operation is a prime example of such automation. Robots that pick up and place objects mimic the human action of picking an object up and placing it in a targeted location. It has led to the development of robotic end-effectors that have a human-like feel. Grippers can be articulated in various ways depending on their application area and well-defined desired tasks. As compliant and soft links deflect more under the same load than their rigid body …

Design And Development Of A Novel Soft Gripper Manipulated By A Robotic Arm, Derek Price

Symposium of Student Scholars

This study presents the design and development of a tendon-driven soft gripper manipulated by a 4 DOF robotic arm. The proposed robotic arm and the gripper explore the new areas focusing on increasing the grasping performance of the gripper as well as the workspace. The gripper is designed as a 3 finger and driven by tendons using two servo motors. The tension of the strings is adjusted using a pulley mechanism and a string. The opening and grasping of the soft gripper are accomplished by each motor. The wide opening allows the gripper to grasp wide objects. The parallel robotic …

Husky Hand: A Low-Cost Electro-Mechanical Prosthetic Arm For The Underprivileged, Adam Robert

Thinking Matters Symposium

A continuation of a low-cost prosthetic upper limb prototype design which was investigated in EGN 301. The prosthetic is specifically designed for the needs and requirements of under privileged individuals in the Dominican Republic with upper limb amputations. The project focuses on the creation of an open-source computer aided prosthetic hand/arm model. The design allows consumer-grade fused filament fabrication (FFF) 3-D printers to be used. The improved design allows for the integration of the PQ-12 linear actuator for grasp and finger control. This simplifies the assembly, while, also reducing the size and mass of the whole unit. Producing a low-cost …

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …

Micro-Manipulation Using Learned Model, Matthew A. Lyng, Benjamin V. Johnson, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microscale devices can be found in applications ranging from sensors to structural components. The dominance of surface forces at the microscale hinders the assembly processes through nonlinear interactions that are difficult to model for automation, limiting designs of microsystems to primarily monolithic structures. Methods for modeling surface forces must be presented for viable manufacturing of devices consisting of multiple microparts. This paper proposes the implementation of supervised machine learning models to aid in automated micromanipulation tasks for advanced manufacturing applications. The developed models use sets of training data to implicitly model surface interactions and predict end-effector placement and paths that …

Developing An Electromechanical Carbon Dioxide Sensor For Occupancy Monitoring, Joshua L. Jenkins, Allison K. Murray, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Energy Information Administration reported in 2012 that heating and cooling processes consume nearly 35% of the total energy used by commercial buildings. In an effort to limit the amount of energy wasted in conditioning empty buildings and rooms, various occupancy detection techniques have been developed that can be paired with a smart heating, ventilation, and air conditioning (HVAC) control system. This work focused on the development of a novel carbon dioxide detector that is sensitive enough to accurately determine if, and when, a room is occupied. To test the new sensor design, a customized chamber with gas inlets was …

High-Throughput Nanoliter Dispensing Device For Biological Applications, Cole Reynolds, Euiwon Bae Dr., J Paul Robinson Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Pathogen identification is a field that can contribute largely to the prevention of the spreading of illness and disease. In the past, pathogen identification has been a long and arduous process due to the time-consuming processes and steps that requires technician’s time and effort. With new technologies emerging however, screening of bacteria colonies can be done in a quick and high-throughput way. The problem is that using the current methods, bacteria cannot be transferred to petri dishes fast enough to keep up with the new screening methods. The current study focuses on exploring different methods to create an ergonomic device …

Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks

The International Student Science Fair 2018

We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …

Chemotherapeutic Drug Cytotoxicity Measurement With A 3d Biomimetic Microfluidic Device And Computational Fluid Dynamics Model, Maryam Moarefian, Caroline Jones, Luke Achenie, Danesh Tafti

Biology and Medicine Through Mathematics Conference

No abstract provided.

Superpositioning High Power Lasers For Mid-Air Image Formation, Auston Viotto

UNO Student Research and Creative Activity Fair

Abstract

This research evaluates different methods to create voxels, 3-dimensional pixels, in air without the need for special glasses or reflections off of surfaces. Research on the advantages of superimposing or the culmination, focusing, of laser light will be conducted. The point of superpositioning/culmination will be evaluated by the brightness of the voxel due to the Rayleigh Scatter Effect. The voxel’s brightness is dependent on the laser output strength and inversely proportional to its wavelength. Once a superimposed/culminated voxel has been created in the lab the next step will be to manipulate the location of the voxel through 3-dimensional space. …

Parallel Computation Using Mems Oscillator-Based Computing System, Xinrui Wang, Ilias Bilionis, Salar Safarkhani

The Summer Undergraduate Research Fellowship (SURF) Symposium

In recent years, parallel computing systems such as artificial neural networks (ANNs) have been of great interest. In these systems which emulate the behavior of human brains, the processing is carried out simultaneously. However, it is still a challenging engineering problem to design highly efficient hardware for parallel computing systems. We will study the properties of networks of Microelectromechanical System (MEMS) oscillators to explore their capabilities as parallel computing infrastructure. Furthermore, we simulate the time-variant states of MEMS oscillators network under various initial conditions and performance of certain tasks. Recent theoretical results show that networks of MEMS oscillators have some …

Development Of Portable Hyperspectral Imaging Device, Chenxi Li, Youngkee Jung, Iyll-Joon Doh, Euiwon Bae

The Summer Undergraduate Research Fellowship (SURF) Symposium

Most of the conventional hyperspectral imaging devices require sophisticated optical components, occupy a large footprint, and requires an initial capital investment for laboratories which mostly suits for laboratories benchtop system. The requirement of shipping the sample and waiting an extended period of time to get the results are the main downsides of this traditional approach. Capitalize in many specific field applications and diagnosis, portable devices provide both convenience and on-site results which are desirable for government agencies and food safety inspectors. This project was aimed to develop a low-cost, portable hyperspectral device for food safety applications. A smartphone was used …

Dynamic Modeling Of Contact-Mode Triboelectric Generators By Lagrange’S Equations, Sean M. Gauntt, James Gibert

The Summer Undergraduate Research Fellowship (SURF) Symposium

Electret based energy scavenging devices utilize electrostatic induction to convert mechanical energy into electrical energy. Uses for these devices include harvesting ambient energy in the environment and acting as sensors for a range of applications. These types of devices have been used in MEMS applications for over a decade. However, recently there is an interest in Triboelectric generators/harvesters, i.e., electret based harvesters that relies on triboelectrification as well as electrostatic induction. The literature is filled with a variety of designs for the latter devices, constructed from materials ranging from paper and thin films; rendering the generators lightweight, flexible and inexpensive. …

Mechanical Reliability Of Implantable Polyimide-Based Magnetic Microactuators For Biofouling Removal, Christian G. Figueroa-Espada, Qi Yang, Hyowon Lee

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydrocephalus is a neurological disorder that typically requires a long-term implantation of a shunt system to manage its symptoms. These shunt systems are notorious for their extremely high failure rate. More than 40% of all implanted shunt systems fail within the first year of implantation. On average, 85% of all hydrocephalus patients with shunt systems undergo at least two shunt-revision surgeries within 10 years of implantation. A large portion of this high failure rate can be attributed to biofouling-related obstructions and infections. Previously, we developed flexible polyimide-based magnetic microactuators to remove obstructions formed on hydrocephalus shunts. To test the long-term …

Design And Implementation Of An Interactive Animatronic System For Guest Response Analysis, Brian Burns

Phi Kappa Phi Research Symposium (Archived)

In theme park based entertainment applications, there is a need for interactive, autonomous animatronic systems to create engaging and compelling experiences for the guests. The animatronic figures must identify the guests and recognize their status in dynamic interactions for enhanced acceptance and effectiveness as socially interactive agents, in the general framework of human-robot interactions. The design and implementation of an interactive, autonomous animatronic system in form of a tabletop dragon, Kronos, and the comparisons of guest responses in its passive and interactive modes are presented in this work. The dragon capabilities include a four degrees-of-freedom head, moving wings, tail, jaw, …

Design And Implementation Of An Interactive Animatronic System For Guest Response Analysis, Brian Burns

GS4 Student Scholars Symposium

For nearly half a century, animatronic figures have provided entertainment in the theme park industry by simulating life-like animations and sounds. These figures enhance the storytelling experience by stimulating visual and audio senses among guests. Animatronics must be identified as human partners to establish status for dynamic interactions for enhanced acceptance and effectiveness as socially-interactive agents. An animatronic dragon, Kronos, has been designed, fabricated and implemented with human-identification sensors. The primary sensor input comes from an infrared camera, the PrimeSense Carmine, and includes an Arduino Mega 2560 as the center of control. Using the data from the depth camera, people …

Development Of Integration Software For Multiple Inkjet Functionalization Systems, Jieyu Lu, J. William Boley, George T.-C. Chiu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Inkjet printing is widely used in functional product manufacturing. Performing a printing task requires communication and synchronization among multiple subsystems (e.g. motion and drop ejection), which introduces complexity in the overall printing system. A user interface has been developed, which enables users to input printing parameters and patterns for printing functional materials. The interface then sends commands to the controllers that execute the printing process. The software can also be expanded to carry out standard experiments for functional printing research and characterization. Moreover, the software is transferable to multiple systems. One application explored using the software is drug anti- counterfeiting …

The Design Of A Mobile, Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Modern animatronics are used as a tool to help engage audiences in realistic and entertaining experiences. Many animatronic figures are dynamic in movement, but static in mobility. The research presented covers the beginnings of mobile animatronic research. An animatronic bald eagle, Opportunity, was designed for that purpose. Animations for Opportunity are generated by integration of Arduino, Pololu Mini Maestro, and Hitec Servo Motors. Arduino receives signals from flex sensors which cause voltage variations when “flexed”. The 1:1 scale, animatronic eagle can be perched on the arm of an “actor” who simulates an eagle’s caretaker. The flex sensors are located within …

Applying Spiking Neural Network Simulation To Neuromodulatory Autonomous Robot Control, Cameron Muhammad

Phi Kappa Phi Research Symposium (Archived)

In this paper, simulation of the brain based on an artificial spiking neuron model is used to create a self-learning algorithm. The spiking neuron simulation is used to demonstrate a neuromodulation program in which the reward seeking properties of dopamine, the risk-adverse effects of serotonin, and the attention-focusing effects of the cholinergic and noradrenergic systems are applied to a mobile robotic platform as it moves autonomously throughout an environment. External stimuli is recorded by the program as spiking “events” that result in corresponding amounts of dopamine and serotonin influenced spiking patterns. These spiking patterns affect how the robot adapts to …

Mems Lab Simulation Tool, Oluwatosin D. Adeosun, Sambit Palit, Ankit Jain, Muhammad A. Alam

The Summer Undergraduate Research Fellowship (SURF) Symposium

MEMS actuators have multiple design applications. Understanding their behavior as well as the ability to predict their actuation characteristics and voltage response is important when designing these actuators. In order to know these devices will behave, designers have to solve multiple analytical equations and experiments that can be very time consuming. Over the course of the summer a tool was created on nanoHUB that will allow users to enter information about a MEMS actuator and provide the voltage response of the actuator. To create the tool, scaling equations were first provided for various geometry configurations and the equations were next …

Semi-Active Structural Control Of A 2-Story Shear Building, Alana K. Wilbee, Shirley Dyke

The Summer Undergraduate Research Fellowship (SURF) Symposium

With continuing urban development across the world, it is becoming ever more important to provide increased structural safety against events such as earthquakes and strong winds. The field of structural control has recently been growing to meet these challenges through the use of semi-active control methods, such as the Magnetorheological (MR) Damper. However, due to the non-linearity of the device, the knowledge base surrounding the MR Damper and its various control algorithms still needs to be strengthened before large-scale implementation of this control method can occur. To address these issues, this study will examine a two story benchmark structure using …

Numerical Modeling Of High Temperature Bayonet Heat Exchanger And Decomposer For Decomposition Of Sulfur Trioxide, Vijaisri Nagarajan, Yitung Chen, Tzu-Chen Hung, Qiuwang Wang, Valery Ponyavin

College of Engineering: Graduate Celebration Programs

Motivation

• Hydrogen is an attractive energy carrier in the future energy technology.

• Hydrogen is produced from splitting of water through various process namely electrolysis, photo-electrolysis, photo-biological production and thermochemical water-splitting.

• The aim of this study is to numerically investigate fluid flow, heat transfer and chemical reaction in bayonet high temperature heat exchanger and decomposer.

• Parametric studies are performed to achieve maximum decomposition with less pressure drop.