Electro-Mechanical Systems Commons^™

A Study Of High Temperature Heat Pipes And The Impact Of Magnetic Field On The Flow Of Liquid Metal, Udit Sharma

Dissertations, Master's Theses and Master's Reports

A study of high temperature heat pipe was conducted to understand its characteristics. A review of working fluid, temperature, wick structure, problems, operational limit and applications was done. Alkali metal were concluded as the most viable candidate for the working fluid.

The impact of three parameters namely magnetic field, heat flux and temperature was analyzed on the performance of HTHP (High Temperature Heat Pipe). The presence of magnetic field had the most considerable impact on reducing the pumping limit of the heat pipe while the temperature had almost negligible effect. Magnetic field results in the pressure drop and adversely affect …

Final Design Report: Allergen Mixing Assistant (Ama) Micro-Refrigeration Redesigning, Mitchell Parks, Minwoo (Michael) Suh

Mechanical Engineering

Abstract

Allergen Mixing Assistant (AMA) by Xtract Solutions is a device designed to more “effectively refrigerate, organize, and mix allergenic extracts”. Although Xtract Solutions intended the product to be fully automated, the company has decided against its automation and declared its current design as a minimum viable product whose components are too expensive, difficult to source and complex. Therefore, Cal Poly AMA design team - Mitchell Parks and Minwoo Suh - has decided to replace these expensive components with much more economical alternatives as shown below:

Stirling cooler

→

Thermoelectric (Peltier) cooler

Custom Arduino

Controller Card

→

TEC Thermostat *** …

High Temperature Hepa Filter Test Unit Upgrades, Alexander Krippner, Ian Corcorran, Michael Burlando

Mechanical Engineering

No abstract provided.

Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni

Graduate Theses and Dissertations

The influence of transient factors such as sky long wave radiation exchange and atmospheric aerosols (i.e., smog, and dust – made up of sand, clay, and silt) are not carefully considered in current building design and simulation models. Therefore, the research objective was to better understand and account for such variables, resulting in improved radiative predictive capabilities, especially important for hot and dry climates under different sky conditions including clean, cloudy, and dusty. Overall, results of this dissertation provided a better prediction method for sky long wave radiation exchange with a building’s roof and the impact of dust accumulation on …

Effect Of Heating And Ionization Of Four Atomizing Gases On The Spray Characteristics Of A High Volume Low Pressure Spray Atomizer, Anthony V. Adornato

Theses and Dissertations--Mechanical and Aerospace Engineering

The disintegration of a liquid jet emerging from a nozzle by a high speed gas stream has been under investigation of several decades. A result of the liquid jet disintegration is droplet formation. This process is referred to as atomization. Industrial applications use atomization as a method for applying coatings to substrates. It has been reported that the use of other atomizing gases instead of compressed plant air will positively affect paint droplet size distributions, spray patterns and finish qualities; furthermore, the ionization and heating of the atomizing gas was reported to positively affect finish qualities. Although ionization techniques have …

2015 Afrl University Design Challenge, Daniel Slattery, Andrew P. Killmeyer, Brandon Null, Brendan Jones, Casey Hale, Jake Stein, Jeff Quartermaine, Kevin Rolik, Nick Tsangeos, Sam Moats, Marisa Seeley

Williams Honors College, Honors Research Projects

The University of Akron’s Air Force Research Laboratory’s Design Challenge Team has engineered a Heat Stress Prevention Kit that includes a facial mask in which the soldier will cool down from the inside out by breathing in the cool air circulating throughout the mask. This cool air is produced from a thermoelectric chip, which has a specific temperature difference on either side, one hot and one cold. Each of the sides is isolated from one another and with the combination of heat sinks, fans, and the simple process of breathing, a system is created by inhaling cool air. The entire …

Analytical Performance Evaluation Of Thermoelectric Modules Using Effective Material Properties, Sean Lwe Leslie Weera

Masters Theses

Designers often face the predicament of non-standardized forms of performance data provided by thermoelectric module manufacturers. Other than experimental means the only method to evaluate the performance of a product would be through analytical modeling using material properties that are usually undisclosed and unknown. This work studies the theoretical approach of obtaining such material properties using the maximum operating parameters reported by the manufacturers. These values are then analytically employed to evaluate the performances of these thermoelectric modules. Experimental means are also devised and carried out on these test samples to validate the integrity of the results. Three-way comparisons between …

Barbeque Grill Temperature Distribution Design Improvement, Peter Gobell, Connor Mcgill, Thomas Willson

Mechanical Engineering

Team License to Grill set out to asses Bull Outdoor Products, Inc.’s barbeques and quantify the apparent uneven temperature distribution or “hot spots” and “cold spots” across the grill. This testing was accomplished with the design and fabrication of a test fixture allowing for accurate and repeatable temperature collection across the barbeque. With results that matched the sponsor’s claims of hot and cold spots, an engineering model was made using heat transfer and thermodynamic equations. Once the model somewhat resembled the experimental data, it was used to suggest different modifications that would allow for better temperature distribution. It was discovered …

High Temperature Filter Test Unit Upgrades, Blair Frandeen, Will Schill, Erick Shewmaker, Joshua Turgeon

Mechanical Engineering

The purpose of this project was to improve the existing High Temperature Filter Test Unit (HTTU) by optimizing performance and adding new features. These features include viewing ports and a camera system for observation of tests, a leak detection system, and a flame impingement system. Additional considerations included improving the current operation of the HTTU by reducing test time and energy loss. The HTTU is designed to test High Efficiency Particulate Air (HEPA) filters at temperatures up to 1300 ˚F, creating conditions which simulate a fire in a chemical processing facility. The HTTU was originally built as a Cal Poly …

California Olive Ranch Hedger, Tyler Enos, Seth Abbott, David Gamba

Mechanical Engineering

The purpose of this project is to evaluate the problems of the current KCI (Kingsburg Cultivator Incorporated) olive tree hedger in use at California Olive Ranch (COR) in Artois, CA, and then correct these problems which should yield a better performing, more efficient, and reliable machine. These problems include: the hydraulic oil temperature getting too high, the saw blades not having enough horsepower, and poor cutting performance due to operator error as well as terrain variations.

Numerical Modeling Of High Temperature Bayonet Heat Exchanger And Decomposer For Decomposition Of Sulfur Trioxide, Vijaisri Nagarajan, Yitung Chen, Tzu-Chen Hung, Qiuwang Wang, Valery Ponyavin

College of Engineering: Graduate Celebration Programs

Motivation

• Hydrogen is an attractive energy carrier in the future energy technology.

• Hydrogen is produced from splitting of water through various process namely electrolysis, photo-electrolysis, photo-biological production and thermochemical water-splitting.

• The aim of this study is to numerically investigate fluid flow, heat transfer and chemical reaction in bayonet high temperature heat exchanger and decomposer.

• Parametric studies are performed to achieve maximum decomposition with less pressure drop.

Floating Tube Heat Exchangers, Patrick Harris, Christina Gedeon, Leonel Medrano, George Milam

Mechanical Engineering

With the slowly diminishing supply of fossil fuels across the world and the heightened risk of carbon dioxide pollution leading to global warming, a shift towards renewable energy is gaining momentum. Recent advances in wind and solar power technology have increased the power density of alternative sources while decreasing the cost per kilowatt-hour, but the technology has not become advanced enough yet for large scale deployment. Combined Power Cooperative has developed a revolutionary design for a concentrated solar power plant that utilizes Fresnel reflectors and a large body of water in which to install them. In addition to being low-cost, …

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

Thrust-Vector Control, Dane Larkin, Harsimran Singh

Mechanical Engineering

Mission Statement

The purpose of this project is to design, build, and test a thrust-vectoring rocket nozzle which will aid in controlling the trajectory of a solid-booster rocket. The system prototype must meet the requirements set forth by the sponsoring enterprise.

The Enterprise

Stellar Exploration is a small space systems technology company located in San Luis Obispo, CA. Stellar Exploration is currently seeking a thrust-vectoring system for its Silver Sword rocket.

Project Scope

The design and analysis portion of this project accounted for a system that would be mounted on to a rocket for operational flight. Therefore, this team has …

Investigation Of Thermal Management And Metamaterials, Calvin T. Roman

Theses and Dissertations

Thermal metamaterials are materials composed of engineered, microscopic structures that exhibit unique thermal performance characteristics based primarily on their physical structures and patterning, rather than just their chemical composition or bulk material properties. The heat transfer performance attributes of a thermal metamaterial are such that similar performance cannot be obtained using conventional materials or compounds. Thermal metamaterials are an emerging technology, and are just now beginning to be acknowledged and developed by the microelectronics and material sciences community. This thesis effort analyzed the current state of thermal metamaterial research, examined the physics and theory of heat transfer and electrical conductivity …

Integrated Vehicle Thermal Management For Advanced Vehicle Propulsion Technologies: Preprint., K. Bennion, M. Thornton

Publications (T)

A critical element to the success of new propulsion technologies that enable reductions in fuel use is the integration of component thermal management technologies within a viable vehicle package. Vehicle operation requires vehicle thermal management systems capable of balancing the needs of multiple vehicle systems that may require heat for operation, require cooling to reject heat, or require operation within specified temperature ranges. As vehicle propulsion transitions away from a single form of vehicle propulsion based solely on conventional internal combustion engines (ICEs) toward a wider array of choices including more electrically dominant systems such as plug-in hybrid electric vehicles …

Magnetohydrodynamic Simulation Of Electromagnetic Pump In Tc-1, Lillian J. Ratliff

Reactor Campaign (TRP)

The pilot molten lead-bismuth target circuit (TC-1) in university of Nevada Las Vegas (UNLV) was designed for beam power of 1 MW accelerator driven system (ADS). The TC-1 is a liquid lead-bismuth eutectic (LBE) circulation loop. Circulation of the liquid alloy is driven by an annular linear induction pump (ALIP). Experimental measurements of system parameters have yielded a surprisingly low pump efficiency of less than 1%. A numerical study of the pump efficiency is being conducted to determine which operational parameters are responsible for this low efficiency and to give insight into future EM pump design. The numerical study will …

Mechanics Of Composite Materials In Fuel Cell Systems, Kenneth Reifsnider, Xinyu Huang, G. Ju, Matthew Feshler, K. An

Faculty Publications

The science and technology that are fundamental to the concept of composite materials are also the foundation for the construction and function of fuel cells and fuel cell systems. The present paper outlines this relationship in the context of the physics and chemistry that are enabled by the specific selection and arrangement of constituents of the “functional composite” fuel cell. General principles of operation are described, and fundamental issues are defined that must be addressed by the composites community if the fuel cell science and engineering is to advance. Examples of several types of functional composite fuel cells are presented, …