Electro-Mechanical Systems Commons^™

Trajectory-Based Model Predictive Control For Rotary Crane Sway Suppression With Only Horizontal Boom Actuation, Haryson J. Nyobuya

Tanzania Journal of Engineering and Technology (TJET)

Safety is of biggest importance in construction and industrial activities involving rotary cranes. These cranes are huge and responsible of moving large parts or/and materials from different positions. Now operating these cranes tend to be subdue to pay load oscillations when moving the load for which is extremely dangerous when not suppressed. This study proposes the generation of trajectory using Model predictive control approach with reduced control horizon compared to state horizon. Reduced control horizon design reduces computational time for trajectory generation while maintaining the pay-load sways to a minimum. In this approach the complex dynamic model is reduced to …

Ion Irradiation Of Microelectromechanical Resonators, Hengky Chandrahalim, David D. Lynes

AFIT Patents

A method of enhancing an electromechanical coupling coefficient of a microelectromechanical (“MEMS”) device. The method includes applying, to a fully fabricated MEMS device, heavy particle ion radiation to the MEMS device at a fluence of at least 1×10¹⁴ cm.⁻². According to other embodiments of the present invention are directed to a bandpass filter comprising a plurality of MEMS devices fabricated in accordance with the methods provided. The MEMS of the plurality are electronically or mechanically coupled.

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Deep Learning Based Control System For Multi-Zone Hvac Residential Buildings, Mohammad H. Z. Alghalayeeni

Mechanical Engineering Theses

Heating, ventilation, and air conditioning (HVAC) systems are major contributors to residential energy consumption. However, most homes continue to rely on single zone thermostat control, which regulates temperature based on a single sensor and cannot account for thermal variations across multiple rooms. This often leads to uneven thermal conditions and inefficient energy use in multi-zone residential buildings. This thesis presents a deep reinforcement learning based approach for improving HVAC zoning control through dynamic airflow distribution. A physics based multi zone thermal model of a residential house was developed to simulate heat transfer processes including conduction, convection, solar and internal heat …

Bridging Physics-Based Modeling And Machine Learning To Predict Material Behavior: Applications In Fatigue Crack Growth And Dielectric Property Characterization, Ansan Pokharel

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation integrates physics-based modeling with machine learning (ML) to predict how materials behave under complex thermal and mechanical conditions. A key innovation of this work is the use of finite element analysis (FEA) to supplement experimental data. This approach creates more diverse and representative synthetic datasets, helping to reduce the limitations and biases that arise when training ML models solely on experimental measurements. The research focuses on two applications: improving the prediction of fatigue properties in superalloys and estimating temperature-dependent, high-frequency dielectric properties relevant to microwave-based chemical processing.

In the first study, low-cycle fatigue experiments were performed on the …

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Integration And Testing Of A Quadruped Robot With Ros2, Jeremy S. West

Master's Theses

The Cal Poly Legged Robotics Group has been developing research and teaching platforms for agile legged robotics since 2020. These platforms are expected to provide students with opportunities to develop complete legged-robot systems from low-level control to advanced robotics tasks such as motion planning and decision making. However, the current prototyped quadruped robot lacked the software and sensing capabilities for high-level quadrupedal gaits and advanced robotic research.

To address these challenges, this project developed Switch, a robotic platform that builds upon the previous BRUCE platform with significant hardware and software upgrades. Switch features a modular design that allows individual software …

Mitigation Of Voltage Disturbances In Industrial Power Distribution Networks Using Dynamic Voltage Restorers, Aviti T. Mushi

Tanzania Journal of Engineering and Technology (TJET)

Most electrical and electronic equipment in industries require high-quality power to function efficiently. Nonetheless, voltage sags and swells are pressing concerns and prone to directly impact the economy of industrial customers. One such customer embattled with these problems is Mbeya Cement Company Limited (MCC) located in Mbeya, Tanzania. These issues mainly are caused by upstream faults and switching operations. One way to address these is by utilizing the voltage injection method, which employs a power device known as a dynamic voltage restorer (DVR). In this paper, the voltage sags and swells of balanced three-phase, unbalanced double-line and single-line to ground …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

A Review Of Lithium-Ion Battery Capacity Fade Deceleration At Power Fluctuations In Renewable Energy Systems, Isaac Gwayi

Tanzania Journal of Engineering and Technology (TJET)

Application of lithium-ion (Li-ion) batteries to store energy in renewable energy systems (RESs) is increasing due to their promising properties. Therefore, it is crucial to understand aging behaviours of Li-ion battery during RES life time as this directly affects cost of energy. Li-ion battery aging can be categorised into calendar aging and cycle aging. Calendar aging depends mainly on temperature and state of charge (SoC). In addition to temperature and SoC, cycle aging depends also on charge and discharge current rates and cut-off voltages. Higher current rates lead to faster Li-ion battery aging. It is necessary to identify appropriate battery …

Assessment Of Maintenance Performance Level Of Selected Hydropower Plants In Tanzania, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Despite significant progress in increasing electricity access to over 78%, electricity reliability in Tanzania remains a concern, with frequent power outages reported. Maintenance issues in hydropower plants have been identified as a critical factor contributing to this problem. However, the specific maintenance performance levels have not been fully assessed. This study conducts a comprehensive evaluation of the maintenance performance of four key hydropower plants: Kidatu (204 MW), Kihansi (180 MW), Mtera (80 MW), and New Pangani Falls (68 MW). Data collected from staff surveys and maintenance records between 2018 and 2022 were used in the study. Although staff demonstrated a …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Optimal Placement Of Distributed Generation Units In Power Distribution Networks Using Particle Swarm Optimization, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

Power losses and voltage drops in distribution networks are critical issues in power system operation, reducing efficiency, reliability, and overall quality of the power supply to customers. Additionally, the rising electricity demand, deregulation of energy markets, and congestion in transmission networks have further contributed to the declining performance of the grid. To address these challenges, integrating distributed generation units (DGUs) into electric distribution systems has gained significant attention. Furthermore, the integration of DGUs into conventional fossil fuel-based power plants is becoming necessary to reduce greenhouse gas emissions. However, proper placement and sizing of DGUs are crucial for achieving optimal benefits. …

Fused-Silica Microelectromechanical Systems For Relative Gravimetry, Ethan Doerstling

Theses and Dissertations

Gravimeters are devices that measure gravitational acceleration which can be used by the United States Air Force (USAF) in the areas of navigation and remote sensing. Fused-silica microelectromechanical systems (MEMS) devices offer capabilities to make inexpensive relative gravimeters with higher thermal stability than common silicon devices while maintaining good gravitational sensitivity. The fused-silica devices in this research were designed, simulated, fabricated, and tested to observe their performance as gravimeters. The devices exhibit properties of highly sensitive accelerometers but the current designs do not qualify as gravimeters. This study provides information to improve the sensitivity and stability of these fused-silica MEMS …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Pressure Switch Tester, Michael Starasinich, Andrew Dobson, Jordan Huschen, Mitchell Smith, Melvin Brown Iii

Honors Capstones

Abstract—- The Pressure Switch Test Stand is a comprehensive and automated testing solution designed to streamline the actuation and validation of simultaneously. At the core of the system is a PLC-controlled architecture that enables precise control and simulation of pressure conditions, replicating real-world scenarios to ensure accurate and reliable switch performance.

This test stand integrates robust mechanical fixtures, a reliable pneumatic control system, custom-designed electrical circuits, and a modular software interface, working in unison to deliver consistent and high-fidelity testing outcomes. Each pressure switch undergoes a sequence of pressure ramps and holds, with the system continuously monitoring switch states, activation …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Validating An Electronics Cooler Experiment And Optimizing Its Performance Using Ansys Icepak, Daniel V. Curl

Mechanical Engineering Undergraduate Honors Theses

Researchers at the University of Arkansas' Mechanical and Electrical Engineering Research Departments have designed and built a cold plate and substrate design for a 10 kV SiC MOSFET power module. Many variables define the design of the cold plate and substrate system and have quantifiable effects on the device’s performance. These variables include but are not limited to geometry and material selection of the fins and substrate. Manufacturing many test designs, running experiments, and comparing their performance is a time-consuming and expensive design optimization method that may be effective for some low-cost applications. Still, simulation is often a more cost-effective …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Synthetic Inertia Provision For Load Frequency Control In Networks With High Penetration Of Renewable Energy Sources, Paulina Mkoi

Tanzania Journal of Engineering and Technology (TJET)

The integration of renewable energy sources (RESs) such as solar photovoltaic (PV) and wind energy has become a promising solution as the world shifts toward clean energy. Solar PV and wind resources are increasingly replacing conventional synchronous generators, leading to reduced system inertia and increased vulnerability to frequency instability during disturbances. To address this challenge, this study proposes a novel synthetic inertia provision strategy using a battery energy storage system (BESS) integrated alongside solar PV. The proposed method dynamically compensates for the loss of inertia by considering the variability of solar PV output due to changes in irradiance and temperature. …

Advancing Prosthetic Technology: 3d-Printed Robotic Arm With Micro Linear Actuators, Vu Tran, Nathan Reed, Mahdi Yazdanpour

Posters-at-the-Capitol

The increasing demand for affordable and accessible prosthetic solutions has driven innovation in the field of robotics. In this project, we present the design and development of a 3D-printed robotic prosthetic arm aimed at addressing the challenges faced by individuals with upper limb amputations. Our prosthetic arm utilizes five micro linear actuators to achieve precise and naturalistic movement. The design of the prosthetic arm prioritizes affordability and accessibility, with a focus on leveraging 3D printing technology to reduce manufacturing costs and enable customization. The use of micro linear actuators offers advantages in terms of compactness, lightweight construction, and efficient power …

Heavy Metals Pollution In Roadside Ecosystems, Lilian Matafu

Tanzania Journal of Engineering and Technology (TJET)

Heavy metals refer to metallic elements that are characterized by having a relatively high density and they are toxic or poisonous even at low concentration. They are environmental pollutant owing to toxicity and longevity in atmosphere and ability to accumulate in living things via bioaccumulation. They tend to enter in different system such as food chain. Analyses of water, soil sediment and the surrounding growing plants (Cynodon dactylon and Cyperus species) for selected heavy metals (Cd, Pb, Zn and Cu) were conducted on a roadside pond located at Boko MSB, Dar es Salaam. Pond water, soil sediments and plant samples …

A Bibliometric Analysis Of Pat-Seig Evolution As An Alternative Energy Generation Method, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Pumps as Turbines (PATs) coupled with Self-Excited Induction Generators (SEIGs) as an alternative energy generation method have been the subject of significant research in recent years. This paper presents a bibliometric analysis of the evolution of PAT-SEIG technology as an alternative energy generation source. An analysis of a comprehensive dataset of peer-reviewed journal articles, conference proceedings, and patents related to PAT-SEIG systems, using advanced bibliometric techniques and PRISMA to identify key research themes, influential authors, the growth of the field and patterns of collaboration, and changes in research focus over time. Over a publication period of 32 years, a total …

Efficient Operation Of Direct Coupled Solar Home Pv System: A Case Of Solar Home Pv System Installed In Dodoma, Tanzania, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

Direct coupled Photovoltaic (PV) system is a common topology among most of the off-grid communities in the world. This topology has less components hence resulting in low investment costs. However, it suffers much losses when battery operating voltage is far from maximum power point voltage of PV modules. This scenario can be attributed by different factors such as; variation in solar radiation, load profile and temperature. Efficient operation of these systems is required in order to reduce losses. Usually in direct coupled system, PV modules are connected in parallel with batteries through a charge controller hence making PV output to …