Biomechanical Engineering Commons^™

Development Of A Discrete Element Model For Artificial Turf, Justin Rittenhouse

Dissertations

NFL data exhibits a distinct correlation between an elevated lower extremity injury rate and synthetic surfaces. These ubiquitous injuries frequently relate to excessive foot traction (i.e., failure to release causing fracture or soft tissue damage). Consequently, a discrete element model was developed using open-source software to analyze stud traction. First, laboratory data was collected via bench level experiments covering seventeen different testing scenarios. A minimum of twenty-five samples were collected per scenario. Total work, average torque, and maximum torque were used as indicators of stud grip. And the latter two were statistically analyzed for outliers and significant differences. Next, an …

Removable Equipment Climate Canopy, Jessica Perez, Sabine Heid, Zil Panchal, Anali Salazar

Mechanical Engineering

The Climate Canopy Project has developed an improved solution for creating an adjustable shade mechanism tailored specifically for users of pull walkers. Through extensive research, goal setting, and a comprehensive framework our project has examined the challenges faced by individuals who rely on walkers for mobility. Our stakeholder requires a product that is lightweight, removable, and compact. This study dissected the designs of previous products on the market and aimed to build a product that aligns with our sponsor’s desires.

This report presents the main goals for the design and manufacturing process, along with key design features utilized to produce …

Effects Of The Loading Rate On Mechanical Properties Of The Human Superficial Femoral Artery, Ali Zolfaghari Sichani, Majid Jadidi

UNO Student Research and Creative Activity Fair

INTRODUCTION: Blood vessels are known for their viscoelastic mechanical behavior, including a dependency on the loading rate. Previous studies have shown mixed results regarding the effects of the loading rate on the mechanical properties of the arterial wall. In this study, our aim was to evaluate the loading rate dependency in the human Superficial Femoral Artery (SFA), the main artery of the leg....

Finite Element Analysis Of The Bearing Component Of Total Ankle Replacement Implants During The Stance Phase Of Gait, Timothy S. Jain

Master's Theses

Total ankle replacement (TAR) implants are an effective option to restore the range of motion of the ankle joint for arthritic patients. An effective tool for analyzing these implants’ mechanical performance and longevity in-silico is finite element analysis (FEA). ABAQUS FEA was used to statically analyze the von Mises stress and contact pressure on the articulating surface of the bearing component in two newly installed fixed-bearing total ankle replacement implants (the Wright Medical INBONE II and the Exactech Vantage). This bearing component rotates on the talar component to induce primary ankle joint motion of plantarflexion and dorsiflexion. The stress response …

Cardiac Active Tension Modeling Via Genetic Algorithm-Optimized Fractional Order Systems, Afnan Khaled Elhamshari

Theses and Dissertations

Developing a computational model to model cardiac activity has been increasingly important in recent decades. Accurate cell-level active tension modeling for cardiomyocytes is critical to understanding cardiac functionality on a patient-specific basis and developing an effective in-silico cardiac model. However, cell-level models in the literature fail to account for viscoelasticity and inter-patient variations in active tension. This research proposes a genetic algorithm-optimized, fractional order system to model cell-level active tension by extending Land’s state-of-the-art model of cardiac contraction. The model features the (left) Caputo derivative of six state variables that identify the mechanistic origins of viscoelasticity in a myocardial cell …

Commentary: A Patient-Specific Lower Extremity Biomechanical Analysis Of A Knee Orthotic During A Deep Squat Movement, Christine Dailey Walck

Publications

The recent study by Walck et al., titled “A Patient-Specific Lower Extremity Biomechanical Analysis of a Knee Orthotic during a Deep Squat Movement,” provides a novel insight into the biomechanical impacts of knee orthotics, particularly the non-linear spring-loaded (NLSL) knee joint orthosis (KJO)1 . This commentary aims to delve into the implications, interpretations, and evaluations of the findings, contextualizing them within the broader discourse on knee orthotics.

Optimal Additive Fabrication Of Patient-Specific Bone Tissue Scaffolds Through Material Formulation, Computational Flow Simulation, And Material Deposition Monitoring, Ethan O’Malley

Theses, Dissertations and Capstones

The advancement of additive manufacturing technologies has opened new avenues for fabricating biocompatible and structurally functional bone tissue scaffolds, essential in treating osseous fractures, defects, and diseases. This research aims to develop mechanically strong, dimensionally precise, and patient-specific porous bone tissue scaffolds that provide both structural integrity and biological functionality. Through three interconnected studies, several key challenges in the fabrication of these structures using the PME additive manufacturing process are addressed. First, the influence of polysaccharide and hydroxyapatite concentrations on the compressive modulus of PME-printed porous scaffolds is investigated. By creating structures with varying hydroxyapatite and polysaccharide compositions, the study …

Design Of Multi-Objective And Optimal Sliding Mode Controller For Tracking Knee Joint Angle During Squatting And Normal Gait Motion, Gabriel Sitler

Theses, Dissertations and Capstones

This work presents two objectives for the use of robust sliding mode controller (SMC) in optimal and multi-objective settings to regulate the position of the knee joint angle for patients suffering from knee injuries. The controller imitates the role of active orthoses that produce the joint torques required to overcome gravity and loading forces and regain natural human movements. The first objective is to focus only on the knee, for which a mathematical model of the shank, the lower part of the leg, is derived first and then used for the control system design and computer simulations. Four objectives are …

Numerical Design, Fabrication, And Characterization Of Porous Tissue Scaffolds For Bone Regeneration, Brandon Coburn

Theses, Dissertations and Capstones

With the recent advancements within biomedical engineering of bone tissue scaffolds, there is still a need to develop mechanically robust and biocompatible with low immunogenicity for bone regeneration. Additionally, the evaluation of the fluid dynamics of the porous Triply Periodic Minimal Surfaces (TPMS) bone scaffold also shows the need for investigation due to the complex fluid interaction of hemodynamics that occurs with the scaffold internal and external domains. To aid in the development of treating bone fractures, defects, and diseases. Furthermore, with the induction of a wide variety of TPMS architecture that yields different topologies, the Convolutional Neural Network (CNN) …

Long-Term Simulation Of Stem Cell Mechanobiology, Manoochehr Rabiei

Mechanical and Aerospace Engineering Dissertations - Archive

An accurate representation of cellular mechanobiology necessitates the inclusion of subcellular elements characterized by minute masses and dimensions. These minute objects yield multiscale dynamic models with disproportionate terms, which require inordinate amounts of computational time to simulate. The computational requirements limit the time span of the simulation to time histories shorter than one second, even when employing supercomputers. This work presents a high-speed approach to simulating the mechanobiology of stem cells. The proposed approach separates the computational time from the size, and distribution, of masses of the subcellular elements, enabling the simulation of weeks-long cellular processes within hours on a …

Generalizable Fugitive Carrier Method For 3d Printing Of Hydrogels, Hakan Arslan

Mechanical and Aerospace Engineering Dissertations - Archive

Hydrogels, with physical characteristics resembling biological soft tissues, hold great potential for bioinspired and biomedical applications. However, using them in additive manufacturing systems has challenges because of their poor mechanical and rheological properties. In response to these challenges, we introduce a fugitive carrier method, a novel and generalizable approach for materials incompatible with pneumatic-based extrusion three-dimensional (3D) printers. Our developed fugitive carrier method allows the 3D printing of a broad spectrum of hydrogel precursors with low viscosity while retaining their inherent properties. This technique has been successfully demonstrated by creating biomimetic structures with anisotropic and programmable systems utilizing temperature-sensitive hydrogel …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Multiscale Fiber Remodeling In The Heart Using A Finite Element Framework, Mohammad Mehri

Theses and Dissertations--Mechanical and Aerospace Engineering

The organization of myofibers and extra cellular matrix within the myocardium plays a significant role in defining cardiac function. When pathological events occur, such as myocardial infarction (MI) or hypertrophic cardiomyopathy (HCM), this organization can become disrupted, leading to alteration in pumping performance. The current study proposes a multiscale finite element (FE) framework to determine realistic fiber distributions in the left ventricle (LV). This is achieved by implementing a stress-based fiber reorientation law, which seeks to align the fibers with local traction vectors, such that contractile force and load bearing capabilities are maximized. By utilizing the total stress (passive and …

Development Of A 2-Dof Robotic Uterus Manipulator, Jeremiah Eggleston, Nicole Pishnery, Siddharth Navaneetha Raj

Williams Honors College, Honors Research Projects

The objective for our senior design project was to design a better uterus manipulator to assist with hysterectomies. We worked with our advisor Dr. Sam Song from the university’s Mechanical Engineering department. There are a variety of uterus manipulators on the market currently, each with unique design features to make the manipulator safer and more effective (van den Haak et al, 2015). Our group’s design modifies and sets itself apart from manipulators currently on the market. Going off others’ attempts to make a better manipulator (Fournelis, 2022), the key modifications our design incorporates are an additional degree of freedom (for …

Shape Inverse Prediction Of Magnetic Field-Actuated Soft Robots By Neural Network Machine Learning, Lineth J. Perez Monsalve

Theses and Dissertations

Soft robotics has drawn tremendous interest in recent years because the compliance and motion of soft robotics enable biocompatibility and versatility for many applications, such as human-machine interaction, wearable and assistive devices, and health monitoring. This study introduces a novel predictive modeling approach using neural networks for shape control of magnetic soft robots. The robots are made of silicone materials embedded with hard magnetic particles, which respond to the external magnetic field provided by a ring-type of permanent magnet. These robots, free from physical connections to external devices, i.e., non-tethered actuation, hold significant potential for applications in healthcare, such as …

Machine Learning Applications In Spine Biomechanics, Farshid Ghezelbash, Amir Hossein Eskandari, Xavier Robert-Lachaine, Shufan Cao, Mehran Pesteie, Zhuohua Qiao, Aboulfazl Shirazi-Adl, Christian Larivière

Études primaires

Spine biomechanics is at a transformation with the advent and integration of machine learning and computer vision technologies. These novel techniques facilitate the estimation of 3D body shapes, anthropometrics, and kinematics from as simple as a single-camera image, making them more accessible and practical for a diverse range of applications. This study introduces a framework that merges these methodologies with traditional musculoskeletal modeling, enabling comprehensive analysis of spinal biomechanics during complex activities from a single camera. The real-world applications explored in this study include assessment in workplace lifting, evaluation of whiplash injuries in car accidents, and biomechanical analysis in professional …

Simultaneous Evaluation Of Tibiofemoral And Patellofemoral Mechanics In Total Knee Arthroplasty: A Combined Experimental And Computational Approach, Yashar A. Behnam, Ahilan Anantha Krishnan, Hayden Wilson, Chadd W. Clary

Center for Orthopaedic Biomechanics: Faculty Scholarship

Contemporary total knee arthroplasty (TKA) has not fully restored natural patellofemoral (P-F) mechanics across the patient population. Previous experimental simulations have been limited in their ability to create dynamic, unconstrained, muscle-driven P-F articulation while simultaneously controlling tibiofemoral (T-F) contact mechanics. The purpose of this study was to develop a novel experimental simulation and validate a corresponding finite element model to evaluate T-F and P-F mechanics. A commercially available wear simulator was retrofitted with custom fixturing to evaluate whole-knee TKA mechanics with varying patella heights during a simulated deep knee bend. A corresponding dynamic finite element model was developed to validate …

A Novel Magnetorheological Pump Concept For Insulin Delivery, Mohammad Towhidul Islam Rimon

College of Graduate Studies: Theses & Dissertations

Over the past 25 years, awareness of type 1 diabetes has significantly increased, leading to a comprehensive understanding of various aspects, including its genetics, epidemiology, and disease burden. According to the Type 1 Diabetic Index, about 8.7 million people around the world live with this long-term autoimmune disease characterized by insulin deficiency and resultant hyperglycemia. However, the increased availability and utilization of artificial pancreas systems could potentially save 673,000 lives by 2040. Although, the advancement of diabetes technology offers Type 1 diabetic patients more tools to enhance glycemic management and achieve effective outcomes, many patients are still hesitant to adopt …