Biomechanical Engineering Commons^™

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Van Accessibility, Ann Larson, Camelia Anne Noureddine, Stephanie Rose Ruzicka, Kayla Joanne Gowey

Mechanical Engineering

The SLO Achievement House provides resources and activities for their clients, including daily trips to different parts of the community, to keep their clients connected to society. These trips require the clients, many of whom struggle with general mobility and strength, to step up to the high entrance of a van or company car. This daily activity poses a challenge both physically and emotionally for the clients. The current solution utilizes commercially available step stools, which lack handrails, overall stability, and adequate step depth. The Achievement House needs a stool or ramp tailored to their client’s needs and their specific …

7lr-C Upper Limb Dancing Prosthetic, Victor Ochoa, Zoe Kelemen, Ged Mulingtapang, Marley Paltiel

Mechanical Engineering

Ella Wallis, a student at Cal Poly and performer in the Cal Poly Drag Club with a trans humeral upper limb difference, wants a prosthetic device that allows for a large range of motion and high degree of articulation to help them better dance in the style of voguing, allowing them to express themselves further while performing. The prosthetic arm is body-driven and relies on momentum to reposition. It attaches to the user through a harness, which is clipped to a socket with elastic straps to not impede the shoulder’s range of motion. The design contains urethane resin, aluminum, stainless …

One-Handed Wheelchair, Brian Azevedo, Cade Veljovich, Carlos Perez, Jakob Zuckermandel, Alexander Harper

Mechanical Engineering

A person who uses a wheelchair for mobility needs a way to operate it with only one hand. This may be necessary if they lack functionality in one hand or prefer to use only one hand while operating the wheelchair. Even for users with two available hands, it is difficult to operate As of now, such wheelchairs are not widely available or easily accessible, yet these devices are crucial for improving the quality of life and mobility of many people. The goal of this project is to design a more viable and ergonomic solution for people who operate a wheelchair …

Emg-Based Intraoperative Neuromonitoring Using Advanced Machine Learning Approaches, Abdalla Nabil Elsharkawy, Nourhan Zayed

Mechanical Engineering

Intraoperative neuromonitoring (IONM) plays a critical role in minimizing nerve damage during surgeries by providing real-time feedback on neural integrity. This study evaluated models associated with deep learning and machine learning models for electromyography classification of signal during intraoperative neuromonitoring (IONM). The CNNLSTM model achieved the highest accuracy (85.2%), outperforming traditional models like KNN (53%), RF (62%), and CNN (76%). This demonstrates the degree to which the CNN-LSTM model can gain insight into temporal and spatial dependencies throughout the EMG signals, which makes it optimal for real-time classification in IONM applications. This implies that deep learning techniques can improve surgical …

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

Liftwalker, Kai A. De La Cruz, Lexie Caterine, Adam Monroe, Jame Whealan

Mechanical Engineering

The LiftWalker’s purpose is to lift users with degenerative diseases from a seated to standing position and support them as they practice the motion of walking as a form of physical therapy. The current LiftWalker is upward of $5,000 so we redesigned the LiftWalker to be more accessible around the world. This meant using affordable and accessible materials and manufacturing processes. To achieve this, we made our design mostly out of bike parts and off-the-shelf components. When it came to the lift system, we found that to maintain a safe and comfortable design it was best to purchase a trailer …

Snap It & Send It, Samantha Gonzales, Brienne Berger, Kelsea Clays, Jessica Schmok

Mechanical Engineering

This report details the final design, manufacturing and assembly, testing procedures and results, as well as future design recommendations of a device aimed at enhancing the mountain biking experience for individuals with limited thumb strength. This project particularly focused on the experience of our sponsor, Cal Poly Mechanical Engineering Professor Andrew Kean. Our team's objective was to create a secure, ergonomic handlebar grip system that does not require thumb strength and is adaptable to various mountain bike models. The final design utilizes a rigid hook that snaps onto mountain bike handlebars with a long, flat piece that slides into a …

Removable Equipment Climate Canopy, Jessica Perez, Sabine Heid, Zil Panchal, Anali Salazar

Mechanical Engineering

The Climate Canopy Project has developed an improved solution for creating an adjustable shade mechanism tailored specifically for users of pull walkers. Through extensive research, goal setting, and a comprehensive framework our project has examined the challenges faced by individuals who rely on walkers for mobility. Our stakeholder requires a product that is lightweight, removable, and compact. This study dissected the designs of previous products on the market and aimed to build a product that aligns with our sponsor’s desires.

This report presents the main goals for the design and manufacturing process, along with key design features utilized to produce …

Hierarchical Based Classifcation Method Based On Fusion Ofgaussian Map Descriptors Foralzheimer Diagnosis Using T1‑Weighted Magnetic Resonance Imaging, Nourhan Zayed, Shereen E. Morsy, Inas A. Yassine

Mechanical Engineering

Alzheimer’s disease (AD) is considered one of the most spouting elderly diseases. In 2015, AD is reported the US’s sixth cause of death. Substantially, non-invasive imaging is widely employed to provide biomarkers supporting AD screening, diagnosis, and progression. In this study, Gaussian descriptors-based features are proposed to be efcient new biomarkers using Magnetic Resonance Imaging (MRI) T1-weighted images to diferentiate between Alzheimer’s disease (AD), Mild Cognitive Impairment (MCI), and Normal controls (NC). Several Gaussian map-based features are extracted such as Gaussian shape operator, Gaussian curvature, and mean curvature. The aforementioned features are then introduced to the Support Vector Machine (SVM). …

Bespoke Bicycle Enclosure, Thomas Link, Kyle Mcafee, Marc Monier, Hunter Walden

Mechanical Engineering

Brian Higgins is an American veteran with retinitis pigmentosa who relies on cycling for transportation. The motivation for this project is to design and manufacture a refined prototype bicycle attachment to support him while biking in the rain and cold. The attachment will serve to enclose him for optimal protection from inclement weather, while maintaining sufficient mobility for daily cycling. Mr. Higgins’ bicycle is equipped with an attached sensor system which assists his visual impairment by using an ultrasonic sensor. Therefore, the attachment cannot adversely affect the function of the sensor system. The project timeline is set at approximately 7 …

Biomechanical Knee Joint For Exoskeleton, Gabriel Ireton Ahern, Calloway Miller, Christianna Altamura, Eric Mailes

Mechanical Engineering

Our senior design project consisted of designing and manufacturing a biomechanically accurate, actuated knee joint to be integrated into an exoskeleton being developed by the Lower Limb Exoskeleton Assist Project (LLEAP), a part of the EMPOWER student association at Cal Poly, San Luis Obispo. As the human knee flexes and extends throughout gait motion, the center of rotation changes. Currently marketed exoskeletons have one point of rotation, which over constrains the knee and causes misalignment between the user and the suit [1]. Our goal was to mimic natural knee joint motion by changing the center or rotation, thus reducing misalignment …

Mechanical Horse Project, Hernan Ramirez Resendiz, Ben Apt

Mechanical Engineering

This document outlines our senior design project for the Cal Poly Mechanical Engineering Department on behalf of Jack’s Helping Hand. As a team of two Mechanical Engineering students, we developed a structure that can support a rider and can move in three degrees of freedom to model the gait patterns of a horse. This senior project will be continued by another group that will focus on electronics and implement the motors that will induce motion on the structure that our team has built. We collected baseline data by attaching an iPhone to a horse and used that motion to compare …

F34 Beekeeper Assist, Kyle Ladtkow, Javier Guerra, Jose Velazquez, Ryan Heryford

Mechanical Engineering

Alejandro Jauregui is a veteran who now works as a commercial beekeeper. He lost both of his legs during his service. While his current prostheses allow him to fully complete his work, he has found that inspection of the bee boxes causes him severe hip and back pain. Bee box inspection is a critical task for beekeeping, especially since he maintains about 200 hives every day. Our senior project team was tasked with designing and building a device that would help him move the top bee box out of the way to allow for inspection. We performed preliminary research into …

Adaptive Vehicle Control, Brian L. Finger, Maria Vargas, Jacob T. Larson, Christopher J. Villa

Mechanical Engineering

This report presents the final design for our device made for Mrs. Laura Jagels. Mrs. Jagels, who has an above the knee amputation, needed a device that would allow her to operate a manual car in a safe and reliable way that still gives her the traditional driving experience. This report takes into consideration the shortcomings of current market devices that enable amputees to operate vehicles. From this research and through interviews with Mrs. Jagels, we were able to decide on our device specifications, giving us a basis to objectively evaluate designs. Ideation and concept prototype building was performed for …

Composite Pegboard, Asa J. Cusick, Luis Corrales, Joelle Hylton, Wyatt Pauley

Mechanical Engineering

Many of those with mobility limitations who are told they will need a wheelchair for the rest of their lives can actually begin to stand and walk again given the proper tools and support. The current design for a wheelchair seeking to support this process is overly complex, heavy, and exhibits some features that could potentially pose a serious health hazard to those using it. The scope of this project is to aid in the design of an adaptable composite wheelchair frame that can be both lightweight and strong, while still allowing for physical diversity of potential users. Through research …

Final Design Review Report: The Underdogs, Parker Johnson, Jack Montgomery, Katherine Thomas

Mechanical Engineering

Aspen is a three-legged dog with mobility issues from Berkeley, California. She was hit by a car and her rear left leg was amputated at the hip. Robin Swanson, Aspen's owner, and her friend, Audrey Beil, are the sponsors for this project. Jack Montgomery, Katherine Thomas, and Parker Johnson, “The Underdogs”, are tasked with helping Aspen regain some of her mobility and the ability to go on walks. Research was done into the problem by talking with the sponsors and looking into existing products, designs, and patents. This document, the Final Design Review Report, outlines the background information, problem specification, …

Deep-Sea Water Collector, Chandler Jones, Jenny Verheul, Michael Di Giorgio

Mechanical Engineering

Properties such as nutrients, DNA, pH levels, and primary productivity are difficult to measure onboard an Underwater Remotely Operated Vehicle (UROV) as mobile submarine sensors are highly expensive and conventional water capture devices are too large to be equipped. However, these properties provide an integral view into our oceans, the species that inhabit them, and our influence on the environment. Collected samples of seawater taken back to labs allow researchers to see a clearer picture of ecosystems’ inhabitants and lifecycle with the analysis of Environmental DNA (eDNA) among many other properties. The scope of this project is to design a …

Elevate Dental, Connor Merrick, Everett Johnson, Jonah Holbrook

Mechanical Engineering

During a dental procedure, patients are often required to have a bite block placed in their mouths to keep them open for the duration of their procedure. These can be very uncomfortable for patients due to lack of properly-fitting sizes. This project presents an alternative fully adjustable bite block that is affordable, comfortable, and easy to use for dental personnel.The bite block is a two piece side loading design that uses interlocking teeth to supply a range of five sizes.

Adaptive Exercise Equipment, Jake Ryan Walejko, Spencer Goodman, Kalina Burns, Journey Martinson

Mechanical Engineering

This document outlines the senior design project carried out by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo. The task is to design adapted exercise equipment for the non-profit organization, Achievement House. The objective of this Final Design Review is to document the final design, manufacturing plan, design verification plan, and project management plan. In addition, this document includes previously presented information on the project background, objectives, and concept design. The background and objective sections document various forms of customer research and include the project goals developed by the athletes and fitness instructors of …

Katie's Jogger, Megan Guillermo, Erin Wint, Abdullah Sulaiman, Kathryn Mangiaracina

Mechanical Engineering

Edward Robinson is an avid runner who would like to take his daughter on runs. His daughter, Katie, is 100% wheelchair bound and currently does not fit in any commercial joggers on the market. The project team was expected to design, build, and test a custom working prototype of a jogger that the sponsor can use to take his daughter on runs. This entire project was performed over a span of three quarters.

Adapted Trailer Hitching System, Joseph Neil Hearn, Maxwell M. Selna, Maximilian D. Cossalter, Eric B. Ringsrud

Mechanical Engineering

This report highlights the entire design process of an adapted trailer hitching system for Taylor Morris: a navy veteran and quadruple amputee. This begins with problem definition through customer and product research. Objectives are generated after the problem is defined and the boundary of the project is set. This outcome of the project focuses on modifications/improvements to the vehicle side of the problem and leaves the trailers untouched. Engineering specifications are developed to constrain the concept design direction, which ultimately dictates the outcome of the final design. The final design is used as a basis to manufacture a structural prototype …

Danny’S Recumbent Bike Accessibility Device Final Design Report, Joseph J. Lee, Huy Nguyen, Jack Mcatee, John Kulick

Mechanical Engineering

The purpose of this document is to fully define our design solution and explain our manufacturing and testing results. Our project’s goal is to find a way to allow Danny Knutson, a retired Navy pilot and incomplete quadriplegic with limited use of his arms and an impaired sense of balance, to enter and exit his recumbent tricycle without any discomfort for him or his aide. We completed multiple interviews with Danny, patent research, existing product research, and other technical literature research in order to fully understand the problem. We synthesized this information to create a concrete list of customer wants …

Surf Leg, Samantha Campbell, Oyundari Altansukh, Caroline Swanson, Kurtis Barth

Mechanical Engineering

The Surf Leg Prosthetic project team in conjunction with QL+ and Operation Surf designed a transtibial prosthetic to be used for surfing. The senior project team focused on the missions of QL+ and Operation Surf as they went through the design process during the 2018-2019 academic year. The problem solved was that a standard prosthetic for a transtibial amputee does not provide the flexibility in enough degrees of freedom for a user to squat and balance on a surfboard. The goal of this project was to create a device specifically designed to improve the user’s balance and control while surfing. …

Single Arm Recumbent Bicycle, Alexander Borsotti, Ryan Westermann, Sean Liston

Mechanical Engineering

The goal of this report is to outline and cover the scope of work for the Single Arm Recumbent Bicycle Senior Project. The report will give an introduction of the problem, a background of the existing research or products relating to our project, the objectives of our project, our project management plan, our final design, manufacturing, testing, our project management, and final recommendations for improving the final design. The team is being supported by the Quality of Life Program, a non-profit organization that works to improve the lives of those injured in duty while serving our nation.

Up until now, …

Wheelie King Trainer And Controller, Michael C. Uytingco, Paul E. Hubner, Dmitriy Petrovykh

Mechanical Engineering

The ``wheelie'' is a popular, classic bicycle trick which novice bicyclists often attempt as an introduction to advanced bike tricks. However, many are hesitant to try due to the risks and safety hazards associated with performing one. The purpose of this project is to create an on-board system which will assist a user in maintaining a wheelie after achieving the required position while incorporating safety mechanisms to prevent the user from injuring themselves or others. Additional requirements of the system are non-obstructive features and seamless transitioning between wheelie conditions.

Upon researching the state of wheelie technology, existing products, such as …

Curb Navigation, Cole A. Tudor, Kaitlyn R. Adams, Robbie Huerta

Mechanical Engineering

The Curb Navigation senior project, proposed by the QL+ organization, was presented to find a solution to an issue a former veteran, Velette, is having. Velette has a difficult time maneuvering curbs when out doing day-to-day errands and activities. The goal of this project is to develop a solution that will give Velette the ability to traverse curbs without the assistance of others or the need to do a wheelie that can lead to an injury. The team has found that adapting and optimizing an anti-tipper design may be the best way to solve the proposed challenge. The team decided …

Team Joseph's Bike Trailer, Keely Thompson, Curtis Wathne, Ryan Meinhardt

Mechanical Engineering

This final design report shows the results of this senior project’s design process of creating a custom bike trailer for Team Joseph. As done in the Scope of Work, Preliminary Design report, and Critical Design report, current products, relevant technologies, and American Society for Testing and Materials (ASTM) standards are fully researched and benchmarked to aid in the design selection process. Customer requirements are looked at and developed into engineering specifications. A detailed design was created for CDR to show to Team Joseph, and manufacturing and testing plans were laid out. This final design report adds the final design revisions …

Usa Boccia Ball Ramp For Athletes With Quadriplegia, Alissa A. Koukourikos, Matthew Lee, Nathan Bernards

Mechanical Engineering

In this report, the design process in creating an assistive device for Boccia Classification 3 (BC3) players is outlined. The initial research steps, including research into the rules of the game, capabilities of the players, and existing products is documented to show where ideas for the product stemmed from. This transitions into requirements that the sponsor requested, and preliminary designs and ideas for the product. Finally, this report explains the details of the final design, which has been analyzed for safety, ease of use, and ability to function under different conditions. The processes of manufacturing and testing will also be …