Applied Mechanics Commons^™

Finite Element Analysis And Active Control For Nonlinear Flutter Of Composite Panels Under Yawed Supersonic Flow, Khaled Abdel-Motagaly

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled structural-electrical modal finite element formulation for composite panels with integrated piezoelectric sensors and actuators is presented for nonlinear panel flutter suppression under yawed supersonic flow. The first-order shear deformation theory for laminated composite plates, the von Karman nonlinear strain-displacement relations for large deflection response, the linear piezoelectricity constitutive relations, and the first-order piston theory of aerodynamics are employed. Nonlinear equations of motion are derived using the three-node triangular MIN3 plate element. Additional electrical degrees of freedom are introduced to model piezoelectric sensors and actuators. The system equations of motion are transformed and reduced to a set of nonlinear …

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

Vortex Wake And Exhaust Plume Interaction, Including Ground Effect, Ihab Gaber Adam

Mechanical & Aerospace Engineering Theses & Dissertations

Computational modeling and studies of the near-field wake-vortex turbulent flows, far-field turbulent wake-vortex/exhaust-plume interaction for subsonic and High Speed Civil Transport (HSCT) airplane, and wake-vortex/exhaust-plume interaction with the ground are carried out. The three-dimensional, compressible Reynolds-Averaged Navier-Stokes (RANS) equations are solved using the implicit, upwind, Roe-flux-differencing, finite-volume scheme. The turbulence models of Baldwin and Lomax, one-equation model of Spalart and Allmaras and two-equation shear stress transport model of Menter are implemented with the RANS solver for turbulent-flow modeling.

For the near-field study, computations are carried out on a fine grid for a rectangular wing with a NACA-0012 airfoil section and …

Reduction Of Thermal Deflection And Random Response Of Composite Structures With Embedded Shape Memory Alloy At Elevated Temperature, Zhiwei Zhong

Mechanical & Aerospace Engineering Theses & Dissertations

A feasibility study on the reduction of thermal deflection and random response of the composite structures using shape memory alloys (SMA) at elevated temperatures is presented in this dissertation. The characteristics of SMA are introduced and the structural problems, static and dynamic, of SMA fiber reinforced composites are investigated. The stress-strain relations are developed for a composite lamina with embedded SMA fibers. The finite element system equations including shape memory effect are derived. A consistent two-step solution procedure is developed for solving the static and dynamic problems of composite structures with embedded SMA fibers subjected to combined acoustic and thermal …

Unsteady Flow Simulations About Moving Boundary Configurations Using Dynamic Domain Decomposition Techniques, Guan-Wei Yen

Mechanical & Aerospace Engineering Theses & Dissertations

A computational method is developed to solve the coupled governing equations of an unsteady flowfield and those of rigid-body dynamics in six degrees-of-freedom (6-DOF). This method is capable of simulating the unsteady flowfields around multiple component configurations with at least one of the components in relative motion with respect to the others. Two of the important phenomena that such analyses can help us to understand are the unsteady aerodynamic interference and the boundary-induced component of such a flowfield. By hybridizing two dynamic domain decomposition techniques, the grid generation task is simplified, the computer memory requirement is reduced, and the governing …

Vibration Control With Piezoelectric Actuation Applied To Nonlinear Panel Flutter Suppression, Zhihong Lai

Mechanical & Aerospace Engineering Theses & Dissertations

Panel flutter is a large-deflection limit-cycle motion excited by the airflow, which is only on one side of a panel. The objective of this research is to analytically study the panel flutter limit-cycle suppression using nonlinear vibration control techniques with piezoelectric actuation. It is well known that piezoelectric materials are characterized by their ability to produce an electrical charge when subjected to a mechanical strain. The converse piezoelectric effect can be utilized to actuate a panel by applying an electrical field. Piezoelectric actuators are driven by feedback controllers, and control the panel dynamics. For a simply supported panel with piezoelectric …

Numerical Simulation Of The Nonlinear Response Of Composite Plates Under Combined Thermal And Acoustic Loading, Jayashree Moorthy

Mechanical & Aerospace Engineering Theses & Dissertations

A time-domain study of the random response of a laminated plate subjected to combined acoustic and thermal loads is carried out. The features of this problem also include given uniform static inplane forces. The formulation takes into consideration a possible initial imperfection in the flatness of the plate. High decibel sound pressure levels along with high thermal gradients across thickness drive the plate response into nonlinear regimes. This calls for the analysis to use von Karman large deflection strain-displacement relationships. A finite element model that combines the von Karman strains with the first-order shear deformation plate theory is developed. The …

The Influence Of Reynolds Number And Atmospheric Effects On Aircraft Wake Vortices Near The Ground, Zhongquan Charlie Zheng

Mechanical & Aerospace Engineering Theses & Dissertations

Aircraft wakes represent potential hazards which can control aircraft spacing and thus limit airport capacity. Wake vortex trajectories and strengths are altered radically by interactions with the ground plane and by atmospheric conditions. This work has been concerned with developing more accurate numerical predictions. A two-dimensional, unsteady numerical-theoretical study is presented which has included viscous effects, the influence of stratification, crosswind and turbulence on vortex behavior near the ground plane, using a vorticity-streamfunction formulation.

A two-parameter perturbation procedure has been developed which uses analytic solutions for the initial flow field to accommodate the ground effect region in the numerical simulation. …

Finite Element Frequency Domain Solution Of Nonlinear Panel Flutter With Temperature Effects And Fatigue Life Analysis, David Yongxiang Xue

Mechanical & Aerospace Engineering Theses & Dissertations

A frequency domain solution method for nonlinear panel flutter with thermal effects using a consistent finite element formulation has been developed. The von Karman nonlinear strain-displacement relation is used to account for large deflections, the quasi-steady first-order piston theory is employed for aerodynamic loading and the quasi-steady thermal stress theory is applied for the thermal stresses with a given change of the temperature distribution, ΔΤ (x, y, z). The equation of motion under a combined thermal-aerodynamic loading can be mathematically separated into two equations and then solved in sequence: (1) thermal-aerodynamic postbuckling and (2) limit-cycle oscillation. The Newton-Raphson iteration technique …

Maximum Likelihood Estimation For Distributed Parameter Models Of Large Beam-Like Structures, Ji Yao Shen

Mechanical & Aerospace Engineering Theses & Dissertations

Proposed large space structures have many characteristics that give an advantage to modeling their structural dynamics by a set of partial differential equations (PDE's). By far, the most effort put forth in studying system identification and control to date has been based on finite element models. Despite its acceptability, such lumped parameter models have inevitable deficiencies primarily because of their complexity. Both approaches are complementary and each should be used where it is most effective. But the fact is that the distributed parameter approach has not been developed to the level of maturity as for the lumped parameter approach.

Motivated …

Integrated Control Of Thermally Distorted Large Space Antennas, Robert H. Tolson

Mechanical & Aerospace Engineering Theses & Dissertations

Studies on controlling the thermal distortion of large space antennae have generally investigated a single orbital position and have optimized actuator locations based on minimizing the RMS surface deviation from the original parabolic shape. One study showed the benefits of directly using far zone electric field characteristics as the performance measure; but, this approach resulted in a nonlinear programming problem. The objective of the current study is to develop an approach to designing a control system that (1) recognizes the time dependence of the distortion and (2) controls variables that are directly related to far field performance in a quadratic …

A Finite Element Formulation For The Large Deflection Random Response Of Thermally Buckled Structures, James Eugene Locke

Mechanical & Aerospace Engineering Theses & Dissertations

The effects of temperature and acoustic loading are included in a theoretical finite element large deflection formulation for thin, isotropic plate and beam type structures. Thermal loads are applied as steady-state temperature distributions, and acoustic loads are taken to be stationary and Gaussian with zero mean and uniform magnitude and phase over the surface of the structure. Material properties are considered to be independent of temperature. Also, inplane and rotary inertia terms are assumed to be neglegible, and all inplane edge conditions are taken to be immovable. For the random vibration analysis, cross correlation terms are included.

The nature of …

On The Space Shuttle Wing Thermal-Structural Analysis, Kumar Krishna Tamma

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element approach for efficient thermal-structural analysis of structures with thermal protection systems (TPS) is described. The approach is applied to Space Shuttle wing structure configurations subjected to reentry heating. New two and three-dimensional finite elements are developed to model heat transfer in the TPS and supporting structure. A typical TPS/Structural element predicts transient nonlinear temperature variations through the TPS thickness and detailed structural temperatures at the TPS/Structure interface. The accuracy of the TPS/Structure approach in two and three-dimensions is evaluated by comparisons with the conventional approach for various configurations of the wing structure. The results indicate that the …