Mechanical Engineering Commons^™

Comparing Efficacy Of Different Dynamic Models For Control Of Underdamped, Antagonistic, Pneumatically Actuated Soft Robots, Morgan Thomas Gillespie

Theses and Dissertations

Research in soft robot hardware has led to the development of platforms that allow for safer performance when working in uncertain or dynamic environments. The potential of these platforms is limited by the lack of proper dynamic models to describe or controllers to operate them. A common difficulty associated with these soft robots is a representation for torque, the common electromechanical relation seen in motors does not apply. In this thesis, several different torque models are presented and used to construct linear state-space models. The control limitations on soft robots are induced by natural compliance inherent to the hardware. This …

Agricultural Field Robotics For Plant Data Acquisition, Jeremy S. Blackford, Jared Werner, Tyler A. Troyer, Ethan Nutter

UCARE: Research Products

As the demand for food increases, we are presented with the challenge of producing food more efficiently. With the help of agricultural robots it will be possible to achieve greater yields by the application of seeds, fertilizers and chemicals in the most efficient way possible. With more advanced robotic systems accurate crop data can be obtained to improve farming products and techniques.

Flex-Row is a medium sized agricultural robotic platform built for autonomously traversing through rough fields during multiple crop growing stages. This platform consisting of a flexible frame with the ability to vary both width and height will initially …

Scalable Three-Dimensional Grasping Mechanism, Ikya Mamidala

Master of Technology Management Plan II Graduate Projects

In this work, we develop a scalable end-effector mechanism for grasping three- dimensional objects with sizes ranging from micrometer to millimeter scale. The design architecture of the gripper comprises an array of identical fingers patented in a circular fashion. Each finger is designed from a novel linkage mechanism whose end effector is manipulated by two independent actuators. In this research, we study three finger gripper device, where each is obtained from a 3 - linkage mechanism. The device is controlled by three independent piezo actuators, and one electro-magnetic solenoid common to each mechanism. The gripping capability depends on how fingers …

Simulation Of Scalability For Autonomous Mobile Microgrids, Nathan Beyers

Dissertations, Master's Theses and Master's Reports

Microgrids are small-scale, decentralized systems for generation, storage, and management of electricity to provide power within a local area. By establishing these microgrids using autonomous robots, they can be made safer and more easily reconfigurable. This thesis presents a plan and outlines the infrastructure needed for scaling up previous experimental work on such systems. This work brings together a variety of tools in the form of both software and hardware to set the stage for how further development can be completed. An architecture for physical testing has been built to validate the full potential of navigation and making electrical connections …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Design And Manufacture Of Mesoscale Robot-Actuated Surgical Instruments, Clayton L. Grames

Theses and Dissertations

Minimally Invasive Surgery (MIS) is a growing field including both laparoscopic androbotic operations. Surgeons and engineers are making continual efforts to reduce the negative effects of procedures on patients. Reducing the size of the surgical instruments is one effective method pursued in this effort. When the instruments approach 3 mm in diameter, they reach a threshold where the entry incisions can be small enough that no scar is left on the patient. Laparoscopic instruments on this scale exist but typically lack wrist articulation and only have 1 degree of freedom (DoF). Alternatively, robotic surgical instruments can achieve high levels of …

A Compliant Mechanism-Based Variable-Stiffness Joint, Jacob Marc Robinson

Theses and Dissertations

A review of current variable-stiffness actuators reveals a need for more simple, cost effective, and lightweight designs that can be easily incorporated into a variety of human-interactive robot platforms. This thesis considers the potential use of compliant mechanisms to improve the performance of variable-stiffness actuators. The advantages and disadvantages of various concepts using compliant mechanisms are outlined, along with ideas for further exploration. A new variable-stiffness actuator that uses a compliant flexure as the elastic element has been modeled, built, and tested. This new design involves a variable stiffness joint that makes use of a novel variable transmission. A prototype …

Optimal Design And Control Of A Lower-Limb Prosthesis With Energy Regeneration, Holly E. Warner

ETD Archive

The majority of amputations are of the lower limbs. This correlates to a particular need for lower-limb prostheses. Many common prosthesis designs are passive in nature, making them inefficient compared to the natural body. Recently as technology has progressed, interest in powered prostheses has expanded, seeking improved kinematics and kinetics for amputees. The current state of this art is described in this thesis, noting that most powered prosthesis designs do not consider integrating the knee and the ankle or energy exchange between these two joints. An energy regenerative, motorized prosthesis is proposed here to address this gap. After preliminary data …

Multi-3d System: Advanced Manufacturing Through The Implementation Of Material Handling Robotics, Jose Luis Coronel Jr.

Open Access Theses & Dissertations

Since the rise of additive manufacturing (AM), innovation has been at the forefront. Additive Manufacturing systems that incorporate complex processes are steadily being developed. One example is the Multi3D System, which was designed to integrate the ability to print multi-material parts with that of embedding electronics. To achieve this automated process, the Multi3D incorporates a six-axis robotic arm to transfer a build platform containing a printed part, to various manufacturing stations (two fused deposition modeling (Stratasys, FDM400mc) systems and a computer numerical control router (Techno CNC Router). The robot is a Yaskawa Motoman MH50 chosen for its payload capacity of …

Adaptive Control For Autonomous Navigation Of Mobile Robots Considering Time Delay And Uncertainty, Stephen Kofi Armah

Dissertations

Autonomous control of mobile robots has attracted considerable attention of researchers in the areas of robotics and autonomous systems during the past decades. One of the goals in the field of mobile robotics is development of platforms that robustly operate in given, partially unknown, or unpredictable environments and offer desired services to humans. Autonomous mobile robots need to be equipped with effective, robust and/or adaptive, navigation control systems. In spite of enormous reported work on autonomous navigation control systems for mobile robots, achieving the goal above is still an open problem. Robustness and reliability of the controlled system can always …

Designing A Biomimetic Testing Platform For Actuators In A Series-Elastic Co-Contraction System, Ryan Tyler Schroeder

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actuators determine the performance of robotic systems at the most intimate of levels. As a result, much work has been done to assess the performance of different actuator systems. However, biomimetics has not previously been utilized as a pretext for tuning a series elastic actuator system with the purpose of designing an empirical testing platform. Thus, an artificial muscle tendon system has been developed in order to assess the performance of two distinct actuator types: (1) direct current electromagnetic motors and (2) ultrasonic rotary piezoelectric motors. Because the design of the system takes advantage of biomimetic operating principles such as …

Design And Analysis Of Robotically-Controlled Minimally Invasive Surgical Instruments, Jordan D. Tanner

Theses and Dissertations

Robot-assisted minimally invasive surgery is used to perform intricate surgical tasks through small incisions using long, slender instruments. The miniaturization of these instruments is advantageous to both surgeon and patient because smaller instruments reduce trauma to surrounding tissue, decrease patient recovery times, and can be used in confined spaces otherwise inaccessible using larger instruments. However, miniaturization of existing designs is limited by friction between moving parts, the volume occupied by the end effector, and manufacturing and assembly constraints. The objective of this work is to develop and analyze concepts that can be used in robot-assisted needlescopic surgery. The concepts are …

Vex Robotics, Ho Joon Cha, Joshua Del Real, Jamie Kalb, Thomas Nance, Jenny Yang

Mechanical Engineering Senior Theses

The objective of our project was to design and construct a control system for communication between two autonomous robots, of different size and capabilities, in an environment with numerous obstacles and challenges. These challenges, completed autonomously, involved moving over and under barriers along with the obtainment and transportation of spherical objects. Our project was tied to the VEX Robotics competition environment as we tested our robots by competing at the World Championships. Unfortunately, due to time and budget considerations, we had to scale back our sensor subsystem. This led to a simpler control system than originally intended; however, we were …

Towards A Sustainable Modular Robot System For Planetary Exploration, S. G. M. Hossain

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis investigates multiple perspectives of developing an unmanned robotic system suited for planetary terrains. In this case, the unmanned system consists of unit-modular robots. This type of robot has potential to be developed and maintained as a sustainable multi-robot system while located far from direct human intervention. Some characteristics that make this possible are: the cooperation, communication and connectivity among the robot modules, flexibility of individual robot modules, capability of self-healing in the case of a failed module and the ability to generate multiple gaits by means of reconfiguration. To demonstrate the effects of high flexibility of an individual …

Review Of Development Stages In The Conceptual Design Of An Electro Hydrostatic Actuator For Robotics, Velibor Karanović, Mitar Jocanović, Vukica Jovanović

Engineering Technology Faculty Publications

The design of modern robotic devices faces numerous requirements and limitations which are related to optimization and robustness. Consequently, these stringent requirements have caused improvements in many engineering areas and lead to development of new optimization methods which better handle new complex products designed for application in industrial robots. One of the newly developed methods used in industrial robotics is the concept of a self-contained power device, an Electro-Hydrostatic Actuator (EHA). EHA devices were designed with a central idea, to avoid the possible drawbacks which were present in other types of actuators that are currently used in robotic systems. This …

Analysis Of A Dual Scissored-Pair,Variable-Speed, Control Moment Gyroscope Driven Spherical Robot, Richard Chase

Wayne State University Dissertations

The objective of this research is to compare barycenter offset based designs of spherical robots to control moment gyroscope (CMG) based designs in order to determine which approach is most effective. The first objective was to develop a list of current state of the art designs in order to gain an overall understanding of what the obstacles in this area of research were. The investigation showed that barycenter offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design …

Computer-Based Stereoscopic Parts Recognition For Robotic Applications, Ahmad A. Fayed

UNLV Theses, Dissertations, Professional Papers, and Capstones

Most of robotic handling and assembly operations are based on sensors such as range and touch sensors. In certain circumstances, such as in the presence of ionizing radiation where most customary sensors will degrade over time due to radiation exposure, these sensors won't function properly. Utilizing two or more cameras (stereo vision) located outside the target zone and analyzing their images to identify location and dimensions of parts within the robot workspace is an alternative for using sensors. Object Recognition is affected by the light condition which oftentimes causes the gray-scale or red, green, and blue values to have a …

Robotic Fingerspelling Hand For The Deaf-Blind, Jerry Vin

Master's Theses

Because communication has always been difficult for people who are deaf-blind, The Smith-Kettlewell Eye Research Institute (SKERI), in conjunction with the California Polytechnic State University Mechanical Engineering department, has commissioned the design, construction, testing, and programming of a robotic hand capable of performing basic fingerspelling to help bridge the communication gap. The hand parts were modeled using SolidWorks and fabricated using an Objet rapid prototyper. Its fingers are actuated by 11 Maxon motors, and its wrist is actuated by 2 Hitec servo motors. The motors are controlled by Texas Instruments L293D motor driver chips, ATtiny2313 slave microcontroller chips programmed to …

Measurement And Description Of Dynamics Required For In Vivo Surgical Robotics Via Kinematic Methods, Jacob G. Greenburg

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

With the goal of improved recovery times and reduced trauma to the patient there has been a substantial shift in the medical community’s demand for minimally invasive surgical (MIS) techniques. With the standardization of MIS becoming more commonplace in the medical field there are still many improvements that are desired. Traditional, manual methods of these surgeries require multiple incisions on the abdomen for the tools and instruments to be inserted. The more recent demand has been to localize the incisions into what is being referred to as a Laparoendoscopic Single-Site (LESS) surgery. Furthermore, the manual instruments that are commonly used …

Fully Compliant Mechanisms For Bearing Subtraction In Robotics And Space Applications, Ezekiel G. Merriam

Theses and Dissertations

Robotics and space applications represent areas where compliant mechanisms can continue to make a significant impact by reducing costs and weight while improving performance. Because of the nature of these applications, a common need is for bearing replacement mechanisms, or mechanisms that perform the function of a bearing without the complexity and failure modes associated with bearings. Static balancing is a design strategy that attempts to reduce the actuation effort of a mechanism, and has been applied to compliant mechanisms in some applications. Monolithic construction, especially by means of 3D printing technology, is a strategy whereby the mechanism links and …

Human Intention Recognition Based Assisted Telerobotic Grasping Of Objects In An Unstructured Environment, Karan Hariharan Khokar

USF Tampa Graduate Theses and Dissertations

In this dissertation work, a methodology is proposed to enable a robot to identify an object to be grasped and its intended grasp configuration while a human is teleoperating a robot towards the desired object. Based on the detected object and grasp configuration, the human is assisted in the teleoperation task. The environment is unstructured and consists of a number of objects, each with various possible grasp configurations. The identification of the object and the grasp configuration is carried out in real time, by recognizing the intention of the human motion. Simultaneously, the human user is assisted to preshape over …

Design, Analysis And Testing Of Haptic Feedback System For Laparoscopic Graspers In In Vivo Surgical Robots, Nikhil Salvi

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Laparo-Endoscopic Single Site (LESS) Robotics Surgery is an advanced technology in the field of Minimally Invasive Surgery (MIS). The LESS surgical robots significantly improve the surgeon’s accuracy, dexterity and visualization, and reduce the invasiveness of surgical procedure results in faster recovery time and improved cosmetic results. In a standard robotic endosurgery, the palpation of tissues is performed by laparoscopic graspers located at the end effectors. The master-slave configuration in robotic surgery leads in remote access to the operation site. Therefore, surgeon’s ability to perceive valuable sensory information is severely diminished. Sensory information such as haptics, which is essential for safe …

Design And Implementation Of The Kinect Controlled Electro-Mechanical Skeleton (K.C.E.M.S), Jason Richard Ekelmann

Doctoral Dissertations and Master's Theses

Mimicking real-time human motion with a low cost solution has been an extremely difficult task in the past but with the release of the Microsoft Kinect motion capture system, this problem has been simplified. This thesis discusses the feasibility and design behind a simple robotic skeleton that utilizes the Kinect to mimic human movements in near real-time. The goal of this project is to construct a 1/3-scale model of a robotically enhanced skeleton and demonstrate the abilities of the Kinect as a tool for human movement mimicry. The resulting robot was able to mimic many human movements but was mechanically …

Development Of A Robotic Platform For Upper Limb Rehabilitation, Stephen Curran, Nigel Kent, David Kennedy, James Conlon

Conference Papers

The aim of this project is to develop a rehabilitation robot intended for use in a non-specialised or domestic setting. Robots have been shown to have a positive effect on limb rehabilitation and developing rehabilitation robots for use outside of specialist rehabilitation centres could be beneficial in terms of access to, intensity and cost of treatment. The device is intended for the rehabilitation of the shoulder/elbow region of the upper limbs. The design requirements for such a device mean that it must be low cost, portable, robust and have a detailed focus on safety. Other areas of interest pertaining to …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Extracting Depth Information From Stereo Vision System, Using A Correlation And A Feature Based Methods, Mahmoud Abdelhamid

All Theses

This thesis presents a new method to extract depth information from stereo-vision acquisitions using a feature and a correlation based approaches. The main implementation of the proposed method is in the area of Autonomous Pick & Place, using a robotic manipulator. Current vision-guided robotics are still based on a priori training and teaching steps, and still suffer from long response time.
The study uses a stereo triangulation setup where two Charged Coupled Devices CCDs are arranged to acquire the scene from two different perspectives. The study discusses the details of two methods to calculate the depth; firstly a correlation matching …

Six Degree Of Freedom Miniature In Vivo Robot For Laparoendoscopic Single-Site Surgery, Ryan L. Mccormick

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The shift in surgery from open procedures to minimally invasive surgery (MIS) techniques have provided benefits of decreased recovery time, improved cosmetic results, and reduced costs. As advances in MIS move to minimize the number of external incisions, such as with Laparoendoscopic Single-Site (LESS) surgery, additional complexities are introduced. These complexities, including unintuitive controls, reduced dexterity, and limited workspace, hinder these methods from more widespread implementation in more complicated surgical procedures.

Through the use of a miniature in vivo robotic surgical platform designed for LESS surgery, these complexities can be mitigated, allowing for wider adoption of MIS by placing the …

Rapid Animatronic Target System, Brandon Keith Bray, Matt Gerhardt Guise, Martin Thomas Quinn

Mechanical Engineering

No abstract provided.

Supervisory Autonomous Control Of Homogeneous Teams Of Unmanned Ground Vehicles, With Application To The Multi-Autonomous Ground-Robotic International Challenge, Katrina L. Corley

Master's Theses - Daytona Beach

There are many different proposed methods for Supervisory Control of semi-autonomous robots. There have also been numerous software simulations to determine how many robots can be successfully supervised by a single operator, a problem known as fan-out, but only a few studies have been conducted using actual robots. As evidenced by the MAGIC 2010 competition, there is increasing interest in amplifying human capacity by allowing one or a few operators to supervise a team of robotic agents. This interest provides motivation to perform a more in-depth evaluation of many autonomous/semiautonomous robots an operator can successfully supervise. The MAGIC competition allowed …

Autonomous Mobility And Manipulation Of A 9-Dof Wmra, William Garrett Pence

USF Tampa Graduate Theses and Dissertations

The wheelchair-mounted robotic arm (WMRA) is a 9-degree of freedom (DoF) assistive system that consists of a 2-DoF modified commercial power wheelchair and a custom 7-DoF robotic arm. Kinematics and control methodology for the 9-DoF system that combine mobility and manipulation have been previously developed and implemented. This combined control allows the wheelchair and robotic arm to follow a single trajectory based on weighted optimizations. However, for the execution of activities of daily living (ADL) in the real-world environment, modified control techniques have been implemented.

In order to execute macro ADL tasks, such as a "go to and pick up" …