Mechanical Engineering Commons^™

Evaluation Of The Effect Of Simplified And Patient-Specific Arterial Geometry On Hemodynamic Flow In Stenosed Carotid Bifurcation Arteries, Rodward L. Hewlin Jr, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 39-44

Evaluation Of Pulse Jet Mixing Using A Scalar Quantity And Shear Stress, Ibraheem R. Muhammad, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 45-52

Manufacturing Knowledge Sharing: The Utilization Of Knowledge Base Technologies In Plm, Abdul Shakoor, Arshad Mehmood, Khizar Azamand Riaz Akber Sayyed

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 53-59

Optimal Liquid Film Thickness Of An Evaporating Film Down An Inclined Plane For Maximum Heat Flux In Spray Cooling Applications, Richard Opoku, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 68-72

Multidisciplinary Design Optimization Of Aerospace Vehicle: Single Engine Rotorcraft, Adeel Khalid

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 60-67

Similarity Solution For Flow Over A Wedge With Phase Change, Yacob M. Argaw, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 73-77

Fuzzy-Logic Health Monitoring Robots For The Elderly, Wuqayan Alwuqayan, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 87-90

Design Of A Controllers For A Laser Beam Stabilizer Using Pid And Observed-Based State Feedback Control, Kwabena A. Konadu, Sun Yi

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 91-98

Development And Testing Of A Diamond Braided Eye Splice, Caitlin Plunket, Austin Yuill, David Branscomb, Chad Rodekohr

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 99-104

Effect Of Welding Parameters On Metallurgical Transformations Of Aluminium Alloy 7005, Reeta Wattal, Sunil Pandey

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 105-112

Development Of A Modular Companion Robot For The Elderly, Jaime Mudrich, Andres Pacheco, Leonardo Ampie, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 113-119

The Design And Validation Of Waveriders Derived From Axisymmetric Flowfields, Nastassja Dasque, Frederick Ferguson

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 120-125

Peristaltic Crawler For Pipeline Unplugging, Jose Matos, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 126-135

A Study Of Tissue Strains Induced In Airways Due To Mechanical Ventilation, Trenicka Rolle, Ramana Pidaparti

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 136-141

An Experimental Study Of Small-Sized Conical Spouted Beds, Mandeep Sharma, Matthew Lousteau, Ingmar Schoegl

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 149-155

Asme Early Career Technical Journal (End Matter), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 156-158

Ocean Wave Energy Generator, Francis S. Fernandez, Bader Ale, Alfonso Parra, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 142-148

Solar Power Generation: Methods And Comparisons, Rambod Rayegan, Yong X. Tao

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 78-86

2010 Fall Engr333 Project Final Report, 2010 Fall Engr333

ENGR 333

Calvin College dorms have a chronic issue with wasting energy. The dorms have little insulation, high infiltration rates, and are heated by low efficiency boilers. These existing characteristics combine for a larger required heating load and increased energy usage. The excess heat, due to poor temperature control, is often vented out through the windows whenever students deem necessary. This project will attempt to reduce wasted energy and efficiently distribute heat as needed.

The Thermal Systems Design class of 2010 was challenged with retrofitting the Bolt-Heyns-Timmer (BHT) dorm to decrease energy consumption and improve efficiency. The class was presented with the …

Universal Play Frame Vi, Justin Bazant, Cullen Crackel, Anthony Franceschi

Mechanical Engineering

This design report details the design process utilized by Adaptive Exercise Designs (AED) in creating the sixth design of the Universal Play Frame (UPF). The UPF is an adaptive frame which supports a variety of devices that allows athletes in wheelchairs with limited range of motion to participate in physical activity. The past five frame designs do not meet the needs of the Friday Club due to complications with function and time constraints. To ensure all of Fridays Club's needs were met, the problem was better defined by converting the customer requirements into engineering specifications. The design process our team …

Autonomous Underwater Vehicles As Tools For Deep-Submergence Archaeology, Christopher N. Roman, Ian Roderick Mather

Graduate School of Oceanography Faculty Publications

Marine archaeology beyond the capabilities of scuba divers is a technologically enabled field. The tool suite includes ship-based systems such as towed side-scan sonars and remotely operated vehicles, and more recently free-swimming autonomous underwater vehicles (AUVs). Each of these platforms has various imaging and mapping capabilities appropriate for specific scales and tasks. Broadly speaking, AUVs are becoming effective tools for locating, identifying, and surveying archaeological sites. This paper discusses the role of AUVs in this suite of tools, outlines some specific design criteria necessary to maximize their utility in the field, and presents directions for future developments. Results are presented …

Exploring The Human Interactivity With A Robot To Obtain The Fundamental Properties Of Materials, William L. Christian

USF Tampa Graduate Theses and Dissertations

This research studies the way in which humans and robots interact with each other. When two humans are working together through a set of robotic devices, do they tend to work together or fight with each other more? In which Cartesian direction do they have the most difficulty? Does fighting drastically affect the performance of the team? Finally, what measures can be taken to promote better cooperation between humans and robots to ultimately allow humans to work just as comfortably with a robotic partner as with a human partner? This research answers these questions and provides an analysis of human-robot …

2010 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2010 ENGR333 project focused on heating and air-conditioning in campus dormitories, which are notoriously leaky and inefficient.

I asked the students “What would it take to retrofit the Bolt-Heyns-Timmer (BHT) dormitory heating and air-conditioning systems in a manner that achieves LEED certification?”

Customer

The customer for this project was Calvin’s VP for finance Henry DeVries.

Application Of Structured Light Imaging For High Resolution Mapping Of Underwater Archaeological Sites, Chris Roman, Gabrielle Inglis, James Rutter

Graduate School of Oceanography Faculty Publications

This paper presents results from recent work using structured light laser profile imaging to create high resolution bathymetric maps of underwater archaeological sites. Documenting the texture and structure of submerged sites is a difficult task and many applicable acoustic and photographic mapping techniques have recently emerged. This effort was completed to evaluate laser profile imaging in comparison to stereo imaging and high frequency multibeam mapping. A ROV mounted camera and inclined 532 nm sheet laser were used to create profiles of the bottom that were then merged into maps using platform navigation data. These initial results show very promising resolution …

Multi-Objective Optimization Of Mechanical Elements Using Artificial Bee Colony Optimization Technique, Vimal J. Savsani, R V. Rao, D P. Vakharia

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 146-152

Asme Early Career Technical Journal (Front Matter), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. -x

Development Of A Biofidelic Material Model For Brain Tissue And Its Application To The Impact Response Of The Human Head, Sandeep Kulathu, David L. Littlefield

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 1-8

Effects Of Environmental Aging On The Thermal And Mechanical Properties Of Vinyl Ester Nanocomposites, Ahmad Almagableh, P Raju Mantena

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 35-40

The Failure Characterization Of Mechanically Fastened Composite Joints, Olanrewanju Aluko, Brian S. Moore

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 19-26

Solving Coupled Systems Of Differential Equations Using The Length Factor Artificial Neural Network Method, Kevin Stanley Mcfall

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 27-34