Mechanical Engineering Commons^™

Dynamic And Damping Properties Of Wood - Based Composite Using The Cantilever Beam Vibration Technique, Maharshi Dave, Tejas Pandya, Damian Stoddard

Early Career Technical Journal (ECTJ)

Section 3: Materials; pp. 75-81

Novel Surface Roughness Measurement Technique Using Capacitance Effect, Soomin Choi, Chabum Lee

Early Career Technical Journal (ECTJ)

Section 3: Materials; pp. 82-84

Numerical Investigation Of Shock Wave Propoagtion In Biomineralized Fish Scale, Matthew Nelms, Wayne Hodo, A M. Rajendran

Early Career Technical Journal (ECTJ)

Section 3: Materials; pp. 90-94

Hierarchical Grouping In Particle Swarm Optimization – Hgpso, Sanjay Sarma O V, Ramana M. Pidaparti, Ankita Joshi

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 97-103

Applications Of Lidar In Autonomous Vehicles, Allen J. Stewart, Jonathan Burden, Kevin Mcfall

Early Career Technical Journal (ECTJ)

Section 5: Miscelleneous; pp. 131-133

Minimum Storage Space Modeling By Maximum Independent Set For Antenna Systems, Serkan Guldal, Murat M. Tanik, Ibrahim Bilgin

Early Career Technical Journal (ECTJ)

Section 5: Miscelleneous; pp. 134-139

Dynamic Response Of Wood Based Bio-Composities Under High-Strain Rate Compressive Loading, Aarsh Shah, Tejas S. Pandya, Damian Stoddard, Suman Babu Ukyam, James Wooten, Jason Street

Early Career Technical Journal (ECTJ)

Section 3: Materials; pp. 85-89

Gesture Recognition Using Ultrasonic Sensors And An Rgb Camera, Minchul Shin, Stephen Zeigler

Early Career Technical Journal (ECTJ)

Section 5: Miscelleneous; pp. 147-151

Comparison Of Stop Sign Distance Detection Using 2d And 3d Cameras, Mahbubul Islam, Kevin Mcfall

Early Career Technical Journal (ECTJ)

Section 5: Miscelleneous; pp. 127-130

A Mesoscale-Based Homogenization Study Of Sand Using The Discrete Element Method, Gerald Pekmezi, David Littlefield

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 104-111

Calculation Of Effective Thermal Conductivity Of Powder Bed Systems Using Smoothed Particle Hydrodynamics Method, Deepak Shah, Alexey N. Volkov

Early Career Technical Journal (ECTJ)

Section 6: Thermal Sciences; pp. 155-159

Heat Transfer Modelling And Bandwidth Determination Of Sma Actuators For Robotics Applications, Tyler Ross Lambert, Austin Gurley, David G. Beale

Early Career Technical Journal (ECTJ)

Section 5: Miscelleneous; pp.140-146

Porous Fe Layered Alumina Channel For Chemical Looping Combustion Micro-Reactors, Bodiuzzaman Jony, Rajagopalan Varadarajan Ranganathan, Mruthunjaya Uddi

Early Career Technical Journal (ECTJ)

Section 6: Thermal Sciences; pp. 168-174

An Improved Contact Algorithm For Multi-Material Arbitrary Lagrangian-Eulerian Hydrocodes In Three-Dimensions, Kenneth C. Walls, David L. Littlefield

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 117-124

Kinetic And Hydrodynamic Simulations Of Laser-Induced Plume Expansion, Omid Azadeh Ranjbar, Alexey N. Volkov

Early Career Technical Journal (ECTJ)

Section 6: Thermal Sciences; pp. 160-167

A 3-D Finite Element Model Of The Synthesis, Degradation, And Spatial Spread Of Camp, S Shettleworth, K J. Webb, A V. Phan, T C. Rich

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 112-116

Drop Tower Data Filtration Validation, L Lisenbee, David L. Littlefield

Early Career Technical Journal (ECTJ)

Section 2: Design & Manufacturing; pp. 33-37

Cfd Simulation Of Fluid Accumulation In Normal And Injured Alveolar Sacs Models, Parya Aghasafari, Sommer Ihab Anjum, Ramana Pidaparti

Early Career Technical Journal (ECTJ)

Section 1: Bio-Medical/Bioengineering; pp. 15-21

2015 Fall Engr333 Project Final Report, Zach Carney, Vicent Rovedatti, Caleb Meindertsma, Daniel Devries, Tobin Tarantowski, Hanfei Niu, Kemal Talen, Ayo Ayoola, Dalton Veurink, Mitch Dubois, Jacob Milhorn, Joseph Cha, Andrew Bouma, Lance Jensen, Se Ge Jung, J. Alex Karr, Stephen Lander, Justin Cooper, Zach Veenstra, Ross Tenney, Phil Van Strien

ENGR 333

The ENGR-333 class was tasked with answering the question: “What would it take for Calvin College to save $600,000/year on campus operations?” The class choose five buildings as study samples, and invested the saving potential on three aspects: energy efficiency, operational and behavioral changes. The five buildings chose by the class were the: Covenant Fine Arts Center, Kalsbeek Huizinga vanReken, Science Building Complex, Shultze Eldersveld, and Spoelhof Fieldhouse Complex.

2015 Fall Engr333 Student Seminar Presentation, Justin Cooper, Ross Tenney, Philip Van Strien, Zach Veenstra, Ayo Ayoola, Hanfei Niu, Kemal Talen, Dalton Veurink, Lance Jensen, Se Ge Jung, Alex Karr, Stephen Lander, Andrew Bouma, Joseph Cha, Mitch Dubois, Jacob Milhorn, Caleb Meindertsma, Dan Devries, Tobin Tarantowski, Zach Carney, Vincent Rovedatti

ENGR 333

File for student presentation, given by students in the Fall 2015 class of ENGR333.

2015 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2015 ENGR333 project focused on building operational efficiency.

I asked the students “What would it take for Calvin College to save $600,000/year on campus operations?”

Customer

The customer for this project was Calvin’s Physical Plant director Phil Beezhold.

Wakeboard Winch, Eric Christensen

Mechanical Engineering and Technology Senior Projects

A wakeboard winch is a stationary device used to tow wakeboard riders through a body of water allowing riders to access locations that may be too shallow for boats or where motorboat restrictions apply. For this instance, the device will be intended to use on a small lake where motorized boats are prohibited but will also possess a transportable design so it may be used in other locations. Winches that can be purchased from manufacturers tend to be expensive and unaffordable for most people while many homemade winches tend to lack the same performance capabilities as manufactured winches. The principal …

Industrial Engineering Consulting, Blake J. Ahrold, Torrey M. Plana

Industrial and Manufacturing Engineering

This paper documents the senior project of Blake Ahrold and Torrey Plana. This project was created to provide a solution to the problem of small to medium Sized enterprises (SMEs) being under represented by lean consulting companies. The project was at first intended to be a lean consulting startup and then pivoted to The Systems Optimization Club. A project charter, Gantt chart, and business model canvas were created for the startup and used as guidelines in the creation of the Systems Optimization club. The club is to be run like a lean consulting company. The club will provide teams of …

Hand Operated Tabletop Letterpress Assembly Instructions 1.0, George Chiu, Brendan Domos, Spencer Herzog, Nathan Sandidge, Kevin Weinstein

Theses

A group of RIT Mechanical Engineering students spent the 2014-2015 academic year in their senior design class collaborating with the RIT Cary Graphic Arts Collection to design and fabricate a 21st century hand-operated platen press.

The press that was designed during this engineering exercise met several requirements:

• be under 30 lbs
• fit in a 24 inch square table top space
• be manufactured with a majority of components which could be purchased from a standard parts supplier
• be able to print with commonly manufactured ink rollers, ink, letterpress chases, spacing and furniture
• the platen and packing had to be adjustable to …

Proceedings Of The 15th Annual Early Career Technical Conference (Front Matter), Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the 15th Annual Early Career Technical Conference, November 7, 2015. School of Engineering, University of Alabama at Birmingham, Birmingham, Alabama; pp. i-x

Section 1: Bio-Medical/Bioengineering, Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the 15th Annual Early Career Technical Conference, November 7, 2015. School of Engineering, University of Alabama at Birmingham, Birmingham, Alabama; pp. 1-36

Section 3: Dynamic Systems & Control, Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the 15th Annual Early Career Technical Conference, November 7, 2015. School of Engineering, University of Alabama at Birmingham, Birmingham, Alabama; pp. 65-106

Section 5: Numerical Methods, Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the 15th Annual Early Career Technical Conference, November 7, 2015. School of Engineering, University of Alabama at Birmingham, Birmingham, Alabama; pp. 151-165

Analysis Of Strain Distribution On Several Parts Of Human Lung During Mechanical Ventilation Breathing, Israr Bin M Ibrahim, Parya Aghasafari, Ramana Pidaparti

Early Career Technical Journal (ECTJ)

Section 1: Bio-Medical/Bioengineering; pp. 3-9

Proceedings Of The 15th Annual Early Career Technical Conference (Complete Issue), Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the 15th Annual Early Career Technical Conference, November 7, 2015. School of Engineering, University of Alabama at Birmingham, Birmingham, Alabama