Mechanical Engineering Commons^™

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Incorporating High-Fidelity Aerostructural Analyses In Wind Turbine Rotor Optimization, Denis-Gabriel Caprace, Adam Cardoza, Andrew Ning, Marco Mangano, Sicheng He, Joaquim R. R. A. Martins

Faculty Publications

s demand grows for wind turbines with larger blades, the design of future wind turbines must account for multi-physical interactions and an ever-increasing number of design load conditions. One aspect, aerostructural coupling, calls for design tools that are both accurate and computationally efficient. In this paper, we present a combined-fidelity approach that couples high-fidelity computational fluid dynamics and computational solid mechanics simulations, with a conventional aeroelastic turbine modeling tool based on blade element momentum and beam theories. The approach is integrated into a multidisciplinary optimization framework. It takes advantage of the high-fidelity tightly-coupled aerostructural simulations to evaluate the rotor power …

A Vacuum-Driven Distillation Technology Of Aqueous Solutions And Mixtures, Guo Guangyu

Dissertations

Distillation of aqueous solutions and aqueous mixtures has vast industrial applications, including desalination, wastewater treatment, and fruit juice concentration. Currently, two major distillation technologies are adopted in the industry, membrane separation and thermal distillation. However, both of them face certain inevitable drawbacks. Membrane separation has disadvantages as relying on high-grade energy, requiring membrane, fouling problem, narrow treatment range, limited scalability, and vibrating and noisy operating conditions. Traditional thermal distillation technologies can avoid above concerns but has other shortcomings, such as relatively low energy efficiency and yield rate, complicated and bulky system structure, and scaling problem.

This project proposes an innovative …

A Parametric Computational Fluid Dynamics (Cfd) Study Of In-Line Horizontal Axis Wind Turbines (Hawts) With Yaw, North Alyster Yates

Masters Theses

Because of the constant use of non-renewable fossil fuels, and the enormous impact they have on global warming and pollution, there has been a push to use more eco-friendly and renewable sources for power. One such form is wind power via turbines. The most common form, Horizontal Axis Wind Turbines (HAWTs), can generate massive amounts of power. However, they also have a serious flaw in their design. As the wind passes through the swept area of the blades and past the tower, it creates massive disturbances in the airflow. These disturbances are called a ‘wake’. When trying to create a …

Design Of A 300cm2 Pemfc Stack With Force And Cfd Simulation To Optimize Flow Channels, Gasket Design, And Clamping Forces., Robert M. Ench

Electronic Theses and Dissertations

Proton exchange membrane fuel cells are important to the future of green energy as hydrogen can be made with green technologies and store energy for later use. Fuel cells can efficiently convert the hydrogen to electricity as needed. This study uses Solidworks simulation to make design improvements to the fuel cell before the prototype build stage of testing; this saves money and time by reducing the prototype builds needed.

In this study, a multi-channel serpentine design with two outlets versus a single outlet is evaluated using CFD to investigate pressure drop. Lower pressure drops are desirable as less energy input …

Turbulence Modeling Of Shock Boundary Layer Interaction In Hypersonic Flows, Sogol Pirbastami

UNLV Theses, Dissertations, Professional Papers, and Capstones

Over the past few years, renewed interest in hypersonic research has significantly increased. Some of the most challenging obstacles in hypersonic vehicles design are associated with the shock wave turbulent boundary layer interactions (STBLI). This can cause a severe jump in pressure along with aerothermodynamic loads, which might result in structural damages or engine unstarts of hypersonic vehicles. Understanding the complex characteristics of these flows requires comprehensive physical experiments and detailed CFD turbulence modeling. In this dissertation, CFD simulations of STBLI using different turbulent modeling based on a set of experiments of hypersonic flow over a large hollow cylinder flare …

Flow Characterization In Mine Ventilation Fan Blade Design Using Cfd, Anwar Endris Hassen

Journal of Sustainable Mining

In axial ventilation fans, the generation of a uniform flow velocity is desirable for better efficiency. To that end, different fan blade types have been developed to achieve better flow uniformity. This article aimed to characterize the flow distribution and its uniformity in four blade designs, namely constant chord, tapered blade, skewed blade, and tapered skewed blade, using Computational Fluid Dynamics (CFD). The study employs an iterative study where key study decisions are made as the study progresses. The study began with the selection of a blade profile for the study. A comparative study between the NACA seven-digit and four-digit …

Numerical Study On Oscillating Flow Over A Flat Plate Using Pseudo-Compressibility In Intermittent Turbulent Regime, Shivank Srivastava Mr.

LSU New Orleans Theses and Dissertations

A Computational Fluid Dynamic (CFD) in-house code is developed to study unsteady characteristics of incompressible oscillating boundary layer flow over a flat plate under laminar and intermittently turbulent condition using pseudo-compressible unsteady Reynolds Averaged Navier- Stokes (RANS) model. In the in-house code, the two-dimensional, unsteady conservation of mass and momentum equations are discretized using finite difference techniques which employs second order accurate (based on Taylor series) central differencing for spatial derivatives and second order Runge-Kutta accurate differencing for temporal derivatives. The in-house code employs Fully Explicit-Finite Difference technique (FEFD) to solve the governing differential equations of the mathematical model. In …

Computational Fluid Dynamics And Fluid Structure Interaction Research On Flow In A Glenn Shunt And A Flexible Tube And On A Cantilevered Plate, Chunhui Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis employs Computational Fluid Dynamics (CFD) simulation technology to solve three flow problems: (1) Blood flow in a Bidirectional Glenn Shunt and a combined Bidirectional Glenn Shunt (BGS) and Blalock-Taussing (BT) Shunt. This shunt is used to address the problem of Cyanosis or “Blue Baby Syndrome,” which is an infant disorder that affects the newly born babies whose skins turn blue or purple because of lack of necessary blood flow between heart and lung due to pulmonary vascular blockage. The goal of this study was to evaluate the performance of BGS and combined BGS+BT shunt in achieving the desired …

Thermal Design Analysis Of Server Chassis Manifolds For Liquid Cooled Servers Using Cfd, Kaustubh Kantilal Adsul

Mechanical and Aerospace Engineering Theses - Archive

Direct-to-chip liquid cooling is one of the most popular methods in data center thermal management when it comes to cooling high chip power densities. A cold plate-based liquid cooling system contains various components such as pumps, data center room, and rack-level manifolds, and server chassis-level manifold. Efficient coolant distribution to the heat-dissipating cold plates plays an important role in both the thermal and hydraulic performance of the server. It is, thus, very important to design and manufacture server chassis manifold geometry that can perform efficiently under the anticipated heat loads and coolant flow rates. In the present thesis, two such …

Ignition Process And Flame Lift-Off Characteristics Of Dimethyl Ether (Dme) Reacting Spray, Khanh Duc Cung, Ahmed Abdul Moiz, Xiucheng Zhu, Seong-Young Lee

Michigan Tech Publications, Part 1

Advanced combustion systems that utilize different combustion modes and alternative fuels have significantly improved combustion performance and emissions compared to conventional diesel or spark-ignited combustions. As an alternative fuel, dimethyl ether (DME) has been receiving much attention as it runs effectively under low-temperature combustion (LTC) modes such as homogeneous charge compression ignition (HCCI) and reactivity control combustion ignition (RCCI). Under compression-ignition (CI), DME can be injected as liquid fuel into a hot chamber, resulting in a diesel-like spray/combustion characteristic. With its high fuel reactivity and unique chemical formula, DME ignites easily but produces almost smokeless combustion. In the current study, …

Numerical Investigation Of Flow Over An Airfoil With Active Cavity, Ahmed Elbaz

Mechanical Engineering

Wind turbine blades are commonly made of airfoils due to their high lifting characteristics. The performance of the airfoils can reach higher optimal conditions with applying various modifications on the airfoil geometry.  The need to improve airfoil performance at low values of Reynolds number is essential to small power wind turbines. Therefore, the objective of this study is to investigate methods to increase the lift to drag ratio, which results in better aerodynamic performance of the airfoil used in wind turbines at low Reynolds number using active flow control by employing a surface cavity with suction. The investigation considered both …

Improvement Of Labyrinth Seal Leakage Rates Using Additive Manufacturing, Austin L. Gasbarra

Master's Theses

The growing popularity of additive manufacturing in commercial applications has al- lowed for new ideas and new ways of thinking when designing components. Further optimization at the component level is possible, though powder metallurgy is in its infancy. This study explores the possibility of using additive manufacturing to develop better labyrinth seals in turbomachinery. Labyrinth seals have a torturous fluid path with high losses, thus limiting the amount of fluid leakage. These types of seals can be non-rotating, allowing them to better take advantage of the additive manufacturing process due to the absence of rotating stresses. Labyrinth seal performance is …

The Effect Of Guide Vane Opening Variations And Total Blades On Cross Flow Turbine Performance Using Computational Fluid Dynamic, Muhamad Akbar Navis, Heru Suryanto, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agrarian country that continuously produces water, so it has the potential to develop a hydroelectric power plant. Computational Fluid Dynamic (CFD) application could be used to be an economical, quick, and efficient approach to improve the engineering design and turbine performance. This research aimed to find the effect of guide vane opening variations and total blades on cross-flow turbine performance using CFD simulation. This research used experimental modelling method with ANSYS program for turbine design with 22, 24, and 26 turbine blades and guide vane opening variations of 12°, 16°, 20°, 24°, and 36°. The data were …

Modeling And Simulation Of A Supercritical Co2-Liquid Sodium Compact Heat Exchanger For Sodium Fast Reactors, Hailei Wang, Sean M. Kissick

Mechanical and Aerospace Engineering Faculty Publications

The study focuses on modeling and simulations of sodium-sCO2 intermediary compact heat exchangers for sodium-cooled fast reactors (SFR). A simplified 1-D analytical model was developed in companion with a 3-D CFD model. Using classic heat transfer correlations for Nusselt number, some simulation results using the 1-D model have achieved reasonable match with the CFD simulation results for longer channels (i.e., 40 cm and 80 cm). However, for short channel (10 cm) when axial conduction within the sodium fluid is significant, the 1-D model significantly over-predicted the heat transfer effectiveness. By incorporating the temperature-jump model, the 1-D model can extend its …

Analysis Of One Way Valve Mechanism For Wings Of A Flapping Drone, Xinchen Deng

Student Works (2020-2029)

The flapping drone is one type of MAVs which is defined as a miniature unmanned aerial vehicle that is inspired by flying birds and insects. Flapping wings can make a perfect combination of thrust and lift by flapping up and down with full usage of unsteady air. The flapping drone has the advantages of high maneuverability and a special lift generation mechanism. Compared with rotary-wing or fixed-wing MAV, it is smaller, lighter, and has higher flight performance. It can quickly change the flight direction and flight speed by control the flapping frequency and it is the only flight mode that …

Cp Check Valve Design, Alec B. Der Matoian, Jessica M. Dent, Skylar M. Tusting

Mechanical Engineering

This report is to serve as a final design review and update to the project sponsors at Zurn Wilkins for the Check Valve Design Senior Project. The senior project team was tasked with improving upon the design of Zurn Wilkins’ backflow prevention assembly for small diameter pipes by reducing the pressure loss created by the check valves within the double check backflow assembly. The information contained in this report builds off the information contained in the Critical Design Report (CDR), as well as feedback and further investigation suggested during an Intermediary Design Review. Based on conclusions from the CDR, our …

Heat Transfer Analysis Of A Data Centre, Arumainathan Kabildev

Student Works (2020-2029)

Data centres are an integral part of networking as it houses servers that facilitate incoming and outgoing data flow. A resolute cooling approach is needed to overcome the hot air dissipated by these servers. This research focused on the computational fluid dynamics (CFD) simulation of the heat transfer modelled upon Telekom Malaysia (TM) City’s data centre 3. The simulation was carried out to ascertain the heat distribution across the data centre by using ANSYS Fluent. The results indicated that the server racks’ inlet temperature reaches 29.79 oC, which is close to the maximum permissible limit according to recommendations provided by …

Reinitiation Mode Study Of Highly Irregular Detonation, Nandakumar Vijayakumar

Mechanical and Aerospace Engineering Dissertations - Archive

The propagation of detonation waves is governed by their stability characteristics. Interest in highly unstable detonation grew when early experiments revealed limits of operation to be directly proportional to the stability of detonation. This research focuses on reinitiation pathways of highly irregular self-sustaining detonation. This is an important aspect of stability which is not yet fully understood, while many possible mechanisms have been proposed in the literature. First, a one-dimensional instability model simulation was performed using a global one-step chemistry mechanism to understand the different unstable modes by increasing the activation energy of a mixture of hydrogen and oxygen. The …

Design And Optimization Of Thermal Management Approaches In Data Center Applications, Rajesh Kasukurthy

Mechanical and Aerospace Engineering Dissertations - Archive

In the present day to day life, Internet of Things (IOT) is everything, i.e., Internet and telecommunication is needed for almost every task of our life, which require data centers. These data centers provide various facilities such as, data processing, storage, transmission, maintenance, operations etc., To perform these tasks, a huge amount of power is consumed, which in turn generates large amount of heat. As these data centers are to be made operational throughout the year, cooling of data centers is of utmost importance. The continued increase in heat flux at the chip level due to new and robust technology …

Cfd Analysis On Liquid Cooled Cold Plate Using Copper Nanoparticles, Sarthak Agarwal

Mechanical and Aerospace Engineering Theses - Archive

In today’s world, most data centres have multiple racks with numerous servers in each of them. The high amount of heat dissipation has become the largest server-level cooling problem for the data centres. The higher dissipation required, the higher is the total energy required to run the data centre. Although still the most widely used cooling methodology, air cooling has reached its cooling capabilities especially for High-Performance Computing data centres. Liquid-cooled servers have several advantages over their air-cooled counterparts, primarily of which are high thermal mass, lower maintenance and eventually lower costs by maintenance by labour. Nano-fluids have been used …

Three-Phase Hydrodynamic Simulation And Experimental Validation Of An Upflow Anaerobic Sludge Blanket Reactor, Camila D' Bastiani, Jéferson Luis Alba, Gabriel Tomazzoni Mazzarotto, Severino Rodrigues De Farias Neto, Anthony Reynolds, David Kennedy, Lademir Luiz Beal

Articles

This research focuses on performing multiphase solid/liquid/gas CFD simulations of a UASB reactor in order to obtain a validated model that provides a clearer understanding of the hydrodynamic behaviour of the three phases in UASB reactors. Eulerian–Eulerian, laminar, three-dimensional, multiphase simulations are carried out using Fluent 16.2. The liquid phase velocity and flow profile are validated through PIV experiments. A liquid mean velocity difference of 8.45% is found between the experimental and numerical results, thus validating the CFD model. Shadowgraphy is applied successfully to validate the biogas phase velocity and bubble size. Based on the hydrodynamic analysis results, the reactor …

A Cfd Study Investigating Drag Reduction For Different Offset And Inline Distance For Two Trucks Platooning, Wael Mokhtar, Kyle Dinger, Shardul Kachare, Mdrazib Hossain, Colin Britcher

Mechanical & Aerospace Engineering Faculty Publications

The automotive industry invests huge resources to improve fuel consumption of commercial vehicles by improving their aerodynamic efficiency. Recently, numerous studies investigating the effect of platooning on aerodynamic drag of semi-trucks have been performed by researchers indicating a positive impact. For the present study, a three-dimensional computational study was performed to investigate the effect of varying offset and linear distance during platooning on the total drag of two semi-trucks. The study was conducted on a full-scale model using Reynold’s Averaged Navier-Strokes governing equations for a moving ground simulation using the STAR-CCM+ computational package. Furthermore, for turbulence, the standard k- …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Particle Injection Simulation On Cold Spray Technology, Christopher A. Santini

Electronic Theses and Dissertations

Computational Fluid Dynamics (CFD) is a useful tool when it comes to research in the fields of Aerodynamics, Turbomachinery, and is used in several other fields of research. CFD is an important tool in the engineering industry because it allows for understanding and evaluation of a new design, this can lead to advancements in developing a more efficient and effective design. This tool helps in the understanding of the flow phenomena and how it can interact with its surroundings. One of the main reasons in the use of CFD is to reduce the cost of testing a design by running …

Magnetic Control Of Transport Of Particles And Droplets In Low Reynolds Number Shear Flows, Jie Zhang

Doctoral Dissertations

“Magnetic particles and droplets have been used in a wide range applications including biomedicine, biological analysis and chemical reaction. The manipulation of magnetic microparticles or microdroplets in microscale fluid environments is one of the most critical processes in the systems and platforms based on microfluidic technology. The conventional methods are based on magnetic forces to manipulate magnetic particles or droplets in a viscous fluid.

In contrast to conventional magnetic separation method, several recent experimental and theoretical studies have demonstrated a different way to manipulate magnetic non-spherical particles by using a uniform magnetic field in the microchannel. However, the fundamental mechanism …

A Numerical And Experimental Study On Effect Of Composition Of Ar-N2 Shielding Gas On The Weld Bead Profile And Its Prediction For Hot Wire Arc Additive Manufacturing, Niraj Pudasaini

College of Graduate Studies: Theses & Dissertations

Wire arc additive manufacturing is a process of making three-dimensional metal parts in a layer-by-layer approach using a feed wire and electric arc as a heat source. Wire arc additive manufacturing (WAAM) is becoming more popular due to its ability to create complex 3D parts, less build time, high deposition rate, and significant cost savings. Out of the many parameters used in WAAM, one of the important parameters is shielding gas which plays a significant role in material quality, properties, and defects. In this study, a controlled amount of Argon (Ar) and Nitrogen (N₂) shielding gases are used …

A Cfd Study Of Steady Fully Developed Laminar Flow Through A 90-Degree Bend Pipe With A Square Cross-Sectional Area, Subodh Sushant Toraskar

Mechanical & Aerospace Engineering Theses & Dissertations

Fluid flow through a closed curved conduit has always been a topic of extensive research, as it has many practical and industrial applications. The flow is generally characterized by a presence of secondary flow, vortical motions and pressure losses for different flow regimes. These observed irregularities may positively or negatively impact the flow. They are beneficial for cases where mixing of fluids is required, usually observed for multiphase flow regimes or detrimental for cases involving particles in the fluid. There are also instances where a particle-laden fluid transported through the curved pipe was directly related to corrosion- erosion related problems. …

Unsupervised-Learning Assisted Artificial Neural Network For Optimization, Varun Kote

Mechanical & Aerospace Engineering Theses & Dissertations

Innovations in computer technology made way for Computational Fluid Dynamics (CFD) into engineering, which supported the development of new designs by reducing the cost and time by lowering the dependency on experimentation. There is a further need to make the process of development more efficient. One such technology is Artificial Intelligence. In this thesis, we explore the application of Artificial Intelligence (AI) in CFD and how it can improve the process of development.

AI is used as a buzz word for the mechanism which can learn by itself and make the decision accordingly. Machine learning (ML) is a subset of …

Transient Flow Analysis Of A Closing Blowout Preventer Using Computational Fluid Dynamics (Cfd), Daniel Barreca

LSU Master's Theses

Reliability of blowout preventers (BOPs) is crucial for drilling and production operations. Erosion of BOP components and hydrodynamic forces on rams may cause failure of BOP elements to seal the well. Transient computational fluid dynamics (CFD) simulations of fluids within the wellbore and BOP offer quantitative and qualitative data related to this reliability during the closure of various BOP components. Since limited research has been published in transient CFD simulations of closing BOPs, this thesis discusses challenges and solutions to simulating closing blowout preventers. Single component fluids are simulated through several BOP geometries such as annular preventers, pipe rams, and …