Mechanical Engineering Commons^™

The Effects Of Fiber Orientation And Volume Fraction Of Fiber On Mechanical Properties Of Additively Manufactured Composite Material, Suresh Chandra Kuchipudi

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing (AM) also known as 3D printing has tremendous advancements in recent days with a vast number of applications in industrial, automotive, architecture, consumer projects, fashion, toys, food, art, etc. Composite materials are widely used in structures with weight as a critical factor especially in aerospace industry. Recently, additive manufacturing technology, a rapidly growing innovative technology, has gained lot of importance in making composite materials. The properties of composite materials depend upon the properties of constituent’s matrix and fiber. There is lot of research on effect of fiber orientation on mechanical properties of composite materials made using conventional manufacturing …

Repair Of Metallic Components Using Hybrid Manufacturing, Renwei Liu

Doctoral Dissertations

"Many high-performance metal parts users extend the service of these damaged parts by employing repair technology. Hybrid manufacturing, which includes additive manufacturing (AM) and subtractive manufacturing, provides greater build capability, better accuracy, and surface finish for component repair. However, most repair processes still rely on manual operations, which are not satisfactory in terms of time, cost, reliability, and accuracy. This dissertation aims to improve the application of hybrid manufacturing for repairing metallic components by addressing the following three research topics. The first research topic is to investigate and develop an efficient best-fit and shape adaption algorithm for automating 3D models' …

Slicing Algorithm For Complex Contour Generation From Coarse Meshed Iso-Surface Data, Divya Hareshkumar Shukla

Mechanical and Aerospace Engineering Theses - Archive

Finite element based topology optimization is used to develop complex geometric configurations for additive manufacturing. Complex coarse-meshed Iso-surface data is extracted from topology optimization results and smooth mathematical geometry must be fit to that data in order to accomplish further design development. To accomplish this geometry fitting, cross-section data must be extracted at specific locations. The stereo lithography (STL) file format is a triangular mesh format which can be developed using 3D CAD Software and is widely used for additive layer manufacturing processes. The main aim of this research work is to generate cross-section contours using a nearest tail-to-head distance …

Effect Of Manufacturing-Induced Defects And Orientation On The Failure And Fracture Mechanism Of 3d Printed Structures, Amit Khatri

Mechanical and Aerospace Engineering Theses - Archive

Additive manufacturing is a rapidly growing cutting edge technology. Number of experimental studies have shown that strength of product manufactured by additive Fused Deposition Method (FDM) is influenced by different processing parameters involved during manufacturing. This thesis work presents experimental and theoretical investigation of mechanical behavior of ABS material fabricated with variation in some of process parameters such as Axis Orientations, Raster Orientation, Infill Percentage, Layer Height and Number of Shells. Different experiments were designed to understand the basics of 3D printing manufacturing and to characterize the mechanical behavior of 3D printed structures. This study helps to understand, how different …

Study Of Selective Laser Remelting Of 316l S.S. To Reduce Roughness On Inclined Surface, Jafar Ghorbani

Theses and Dissertations

Additive manufacturing (AM) technologies are increasingly competing with subtractive methods, and there are promising applications for additive technologies that are hybrid with traditional manufacturing methods. Poor surface roughness of additive manufactured parts continues to be a major challenge especially for advanced functional parts. In this study, effect of processing parameters are evaluated, optimized and verified by using the Box–Behnken design of experiment method. The results, for the first time, reveal that surface remelting has the potential to become a high speed approach for improving the roughness of non-horizontal surface of additive manufactured parts.

The Effect Of Process Parameters And Surface Condition On Bond Strength Between Additively Manufactured Components And Polymer Substrates, Bharat Bhushan Chivukula

Graduate Theses and Dissertations

Additive patching is a process in which printers with multiple axes deposit molten material onto a pre-defined surface to form a bond. Studying the effect of surface roughness and process parameters selected for printing auxiliary part on the bond helps in improving the strength of the final component. Particularly, the influence of surface roughness, as established by adhesion theory, has not been evaluated in the framework of additive manufacturing (AM). A full factorial design of experiments with five replications was conducted on two levels and three factors, viz., layer thickness, surface roughness, and raster angle to examine the underlying effects …

Novel Closed-Loop Control Strategy For Inkjet-Based Additive Manufacturing System, Yunong Shi, Chunsheng Ye

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Calphad-Based Materials Genome And Its Applications To Additive Manufacturing, Wei Xiong

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

A Smooth Toolpath Generation Method For Laser Metal Deposition, Renwei Liu, Zhiyuan Wang, Yunlu Zhang, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser metal deposition (LMD), also known as direct metal deposition (DMD) or laser engineered net shaping (LENS), which uses a laser beam to form a melt pool on a metallic substrate, into which powder or wire is fed. The conventional contour and zigzag toolpath pattern for LMD are discontinuous at turn points or corner points. The discontinuous toolpath causes uneven deposition, which brings height variation and porosity problems. This paper aims to develop a smooth toolpath generation method for LMD to improve the deposition quality. A parametric curve equation based on trigonometric functions is derived and built. It can be …

Applications Of Additive Manufacturing Techniques In Making Energetic Materials, Peter A. Cattani, Trevor J. Fleck, Jeff F. Rhoads, Steven F. Son, I. Emre Gunduz

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energetic materials are currently manufactured using methods such as casting, which can only produce certain geometries. Additive manufacturing enables more flexible fabrication and the potential for improved material consistency. Additive manufacturing has transformed many industries, but has only recently been applied to the manufacturing of energetic materials. This paper describes the development of two processes to apply additive manufacturing methods to energetic materials. Method one applies a fused deposition modelling approach (FDM). 5 µm aluminum powder and PVDF were mixed and made into filaments using a Filabot Original filament extruder. Energetic filaments were created composed of 90:10, 80:20, and 75:25 …

Development Of The Compact Jet Engine Simulator From Concept To Useful Test Rig, Henry H. Haskin

Mechanical & Aerospace Engineering Theses & Dissertations

Two Compact Jet Engine Simulator (CJES) units were designed for integrated wind tunnel acoustic experiments involving a Hybrid Wing Body (HWB) vehicle. To meet the 5.8% scale of the HWB model, Ultra Compact Combustor technology from the Air Force Research Laboratory was used. The CJES units were built and integrated with a control system in the NASA Langley Low Speed Aero acoustic Wind Tunnel. The combustor liners, plug—vane and flow conditioner components were built in-house at Langley Research Center. The operation of the CJES units was mapped and fixes found for combustor instability tones and rig flow noise. The original …

Investigation Of Additive Manufacturing Using Industrial Robots, Matt Heuser

Mechanical and Aerospace Engineering Theses - Archive

Conventional additive manufacturing platforms are controlled using G-code, a numerical control language used to define the process parameters and move- ment of the print head. First, a digital model of the desired shape is created using 3-D computer graphics software. Then the model is analyzed by software tools that generate the necessary G-code instructions to be used by a 3-D printer to produce the desired object. The goal of this research is to lay the foundation and develop the necessary tools to 3-D print custom objects based on the viscous extrusion process using industrial robots. The first task is to …

Effects Of Defects On The Performance Of Hierarchical Honeycomb Metamaterials Realized Through Additive Manufacturing, Kazi Moshiur Rahman

Electronic Theses and Dissertations

Cellular metamaterials are of immense interest for many current engineering applications. Tailoring the structural organization of cellular structures leads to new metamaterials with superior properties providing lightweight and very strong/stiff structures. The incorporation of hierarchy to regular cellular structures enhances the properties and introduces novel tailorable metamaterials. For many complex cellular metamaterials, the only realistic manufacturing process is additive manufacturing (AM). The use of AM to manufacture large structures may lead to several types of defects during the manufacturing process, such as imperfect cell walls, irregular thickness, flawed joints, partially missing layers, and irregular elastic plastic behavior due to toolpath. …

Design Optimization Of Sandwich Core, Mohammad Tauhiduzzaman

Open Access Theses & Dissertations

Ultralight sandwich structures comprising of low-density core with stiff facings have attracted significant research interest for their considerable weight saving applications. The aircraft industries are focusing on decreasing the structural mass to lower the manufacturing and operating costs. Design analysis of the sandwich cores using finite element analysis has been developed as a promising concept to feature sandwich structures with maximum strength, stiffness, and reduced weight. To obtain multifunctional behavior of sandwich panels, a profound investigation of geometrical and mechanical properties in the transverse plane is required because it is very susceptible to any kind loadings. Structural optimization is one …

Effect Of Sparse-Build Internal Structure On Performance Of Fused Deposition Modeling Parts, Shixuan Meng

Masters Theses

"Fused deposition modeling (FDM) technology has been used in additive manufacturing for years and is able to significantly reduce both manufacturing time and cost for production tooling and end-use parts. Autoclave molding is one of the conventional tools used to produce composite parts. In autoclave molding, the soft composite material is positioned on the molding tool, and then subjected to vacuum and elevated temperatures to facilitate the curing of the resin. With additive manufacturing (AM), it is possible to fabricate the molding tool with a sparse internal structure, thereby reducing the fabrication time and cost compared to a solid tool. …

Thermophysical And Thermochemical Property Measurement And Prediction Of Liquid Metal Titanium Alloys With Applications In Additive Manufacturing, Jonathan Richard Raush

LSU Doctoral Dissertations

Accurate high-temperature thermophysical property data for liquid metals and alloys are important for simulation of laser-based 3D printing processes. To understand and better control such additive manufacturing processes, knowledge of density, viscosity, and surface tension of liquid metals and alloys versus composition and temperature is needed. Likewise, thermochemical property data information regarding alloys, including chemical activities and free energies relative to composition and temperature, aid in the understanding and development of phase data important in the material design process. Vacuum electrostatic levitation (ESL) is an important technique through which both thermophysical and thermochemical property measurements can be accomplished without physical …

Manufacturing And Mechanics Of Polymer Matrix Composites, Md Shariful Islam

Open Access Theses & Dissertations

Fiber-reinforced composite materials are widely used in the aerospace and automobile industries. Their strength-to-weight and stiffness-to-weight ratios make them suitable to be used in spacecraft, especially as cryogenic tank materials. One of the focus of this dissertation is to investigate the application of woven carbon and Kevlar® fiber composites as cryogenic tank materials. Tensile, bending and short beam shear tests are performed on rectangular specimens at room temperature and after cryogenic exposure (-196°C). It is found that the mechanical properties of these composite materials do not degrade significantly due to cryogenic exposure. It is observed that the failure mode took …

Hierarchical Control Of Complex Manufacturing Processes, Hesam Zomorodi Moghadam

Doctoral Dissertations

"The need for changing the control objective during the process has been reported in many systems in manufacturing, robotics, etc. However, not many works have been devoted to systematically investigating the proper strategies for these types of problems. In this dissertation, two approaches to such problems have been suggested for fast varying systems. The first approach, addresses problems where some of the objectives are statically related to the states of the systems. Hierarchical Optimal Control was proposed to simplify the nonlinearity caused by adding the statically related objectives into control problem. The proposed method was implemented for contour-position control of …

Additive Manufacturing Methodologies For Multi Process And Multi Material Scenarios, Tushar Saini

Mechanical and Aerospace Engineering Theses - Archive

Additive Manufacturing processes have been developing and continuously improving but are primarily constrained to single materials, albeit some commercial multi extrusion 3D printers do exist where by it is possible to print with multi-colored fluidic polymers or at most two filaments of the same type. 3D printing an object with volumetric varying properties requires manual modification of the G-Code, not a feasible option considering the average size of G-Code generated by the slicing software. This research focuses on developing a post processing methodology that modifies the large G-Code files generated by the slicing software according to user requirements. The proposed …

Development And Prototype Validation Of An Additive Manufactured Cubesat Propulsion Tank, Geovanni A. Solorzano

Doctoral Dissertations and Master's Theses

The purpose of this study is to determine if a cubesat propellant tank using the additive manufacturing technology of direct metal laser sintering meets the requirements, and material properties of a conventionally manufactured tank. Additionally, to see if additive manufactured parts are a viable option to be used in cubesat applications. This was accomplished by designing a model which will be used by the ARAPAIMA cubesat that meets all the Air Force's University Nanosatellite Program (UNP), NASA's and Department of Defense's requirements for pressurized vessels and material properties. A finite element analysis study was conducted to determine where and when …

The Design For Manufacturing And Assembly Analysis And Redesign Of An Aircraft Refueling Door Hinge Utilizing Additive Manufacturing, Kurt A. Schwarz

Doctoral Dissertations and Master's Theses

In this thesis, an aircraft door hinge assembly provided by Gulfstream Aerospace was analyzed following an established process called DFMA. The hinge was then redesigned to be additively manufactured, which is uncommon currently in industry for load bearing components. It was shown that the Design for Manufacturing (DFM) guidelines were inadequate when applied to the new technology of additive manufacturing (AM). This was primarily due to AM's unique and unprecedented manufacturing capabilities.

A conservative redesign approach was followed due to a limitation in current AM material properties and time available for analysis. Despite this, a significant improvement in weight reduction …

Does Material Choice Drive Sustainability Of 3d Printing?, Jeremy Faludi, Zhongyin Hu, Shahd Alrashed, Christopher Braunholz, Suneesh Kaul, Leulekal Kassaye

Dartmouth Scholarship

Environmental impacts of six 3D printers using various materials were compared to determine if material choice drove sustainability, or if other factors such as machine type, machine size, or machine utilization dominate. Cradle-to-grave life-cycle assessments were performed, comparing a commercial-scale FDM machine printing in ABS plastic, a desktop FDM machine printing in ABS, a desktop FDM machine printing in PET and PLA plastics, a polyjet machine printing in its proprietary polymer, an SLA machine printing in its polymer, and an inkjet machine hacked to print in salt and dextrose. All scenarios were scored using ReCiPe Endpoint H methodology to combine …

Thermographic Investigation Of Laser Metal Deposition, Sreekar Karnati

Masters Theses

"Laser metal deposition as an additive manufacturing technique has been proven to possess the capability for fabricating complex, intricate geometries and excellent material properties through material deposition. Accurate manufacture of such geometric features would require precise control over the material deposition process. The need of the hour are process monitoring and analyses mechanisms that are crucial in ascertaining the occurrence of the intended actions during deposition while also serving as effective learning tools. The current work involved developing and incorporating an Infra-Red (IR) camera as a process monitoring tool for laser metal deposition. Using the IR camera the thermal dynamics …

An Experimental Study Of Fabrication Temperature Effect On Aqueous Extrusion Freeform Fabrication, Jie Li

Masters Theses

"In order to understand the effect of fabrication temperature, a computer controlled 3-D gantry system was used to extrude aqueous alumina paste using Extrusion Freeform Fabrication. The system includes a temperature control subsystem that allows for fabrication of components below the paste's freezing temperature in the range of -10⁰C to -30⁰C and a hot plate with temperature in the range of 20⁰C to 80⁰C inside a room temperature chamber. Comparisons in terms of relative density, mechanical properties, part accuracy and minimum deposition angle were performed by Extrusion Freeform Fabrication at 40⁰C plate temperature inside a room temperature chamber and at …

Stress-Limiting Test Structures For Rapid Low-Cost Strength And Stiffness Assessment, Andrew Katz, Craig P. Lusk, Nathan B. Crane

Faculty Publications

Purpose: Evaluate the use of a simple printed geometry to estimate mechanical properties (elastic modulus, yield strength) with inexpensive test equipment.

Design Methodology/Approach: Test geometry is presented that enables controlled strains with manual deformation and repeatable measurement of vibrational frequencies. This is tested with multiple FDM machines to assess measurement accuracy and repeatability. Printing orientation and some printing parameters are varied to assess the measurement sensitivity.

Findings: The test methods show good correlation with manufacturer material specifications in the X-Y plane and reported elastic strain limits. It is also sensitive to printing orientation and printing parameters.

Research Limitations/Implications: Further work …

Investigation Of Traditional And Alternate Living Hinge Designs For Fused Deposition Modeling Additive Manufacturing Process, Cassandra Sue Gribbins

Doctoral Dissertations and Master's Theses

A manuscript-style thesis composed of three studies covered the application of living hinge designs in the additive manufacturing process of fused deposition modeling. Initial research included comparing numerical and analytical linear analyses on a traditional living hinge design. The second research consisted of tensile testing for the material properties of the Acrylonitrile Butadiene Styrene (ABS) used in fused deposition modeling (FDM) process by the MakerBot 2X as well as adjusting the traditional design to be printed. The third study explored alternate living hinge designs that utilize the geometric freedom provided by additive manufacturing to more evenly distribute stress across the …

A Decision Support System To Measure Product Suitability For Additive Manufacturing Processes, Cynthia De Vasconcellos Barros

Theses and Dissertations - UTB/UTPA

Additive Manufacturing (AM) technologies started arising around 1980’s and they are currently considered to be the third industrial revolution. With improvements in computers, materials, and automated machines, manufacturers across several types of industries are becoming more familiar with AM processes, and it has become more common to see products that are being fabricated by using this new technology. However, there are still questions regarding when it is suitable to use Additive Manufacturing or conventional manufacturing processes depending on different factors. The purpose of this thesis is to create a Decision Support System (DSS) that will help users measure product suitability …

Characterization Of High-Purity Niobium Structures Fabricated Using The Electron Beam Melting Process, Cesar Adrian Terrazas

Open Access Theses & Dissertations

Additive Manufacturing (AM) refers to the varied set of technologies utilized for the fabrication of complex 3D components from digital data in a layer-by-layer fashion. The use of these technologies promises to revolutionize the manufacturing industry. The electron beam melting (EBM) process has been utilized for the fabrication of fully dense near-net-shape components from various metallic materials. This process, catalogued as a powder bed fusion technology, consists of the deposition of thin layers (50 - 120µm) of metallic powder particles which are fused by the use of a high energy electron beam and has been commercialized by Swedish company Arcam …

Fabrication Of A Nickel-Based Superalloy In Electron Beam Melting And Process Improvements Using Thermal Feedback From A Multi-Wavelength Pyrometer, Jonathan Minjares

Open Access Theses & Dissertations

The focus of this research was to fabricate parts composed of a nickel-based superalloy containing high levels of aluminum and titanium (NSAT) by using electron beam melting (EBM) additive manufacturing (AM) technology and utilizing thermal feedback from a multi-wavelength pyrometer to perform process improvements leading to near defect-free parts. EBM is an AM technology that utilizes metal powder to fabricate parts in layer-by-layer manner. A multi-wavelength pyrometer was implemented in an Arcam S12 (Arcam AB, Sweden) EBM system to observe and record surface temperatures throughout fabrication. Temperature data from the EBM system and the multi-wavelength pyrometer were graphed using MATLAB …

Process Study And Control Of Electron Beam Melting Technology Using Infrared Thermography, Jorge Mireles

Open Access Theses & Dissertations

An IR camera was installed in an Arcam A2 system (Arcam AB, Mölndal, Sweeden) and layer-by-layer image acquisition was achieved. The camera's capability to detect manufacturing defects was evaluated by implementing computer vision techniques using LabVIEW measurement and programming software (National Instruments, Austin, TX). Thermal maps acquired by the IR camera allowed layer-by-layer part temperature to be recorded. A core objective of this research was to study the impact of processing temperature on EBM-fabricated Ti-6Al-4V parts and achieve controlled mechanical properties. In this research, build variations were achieved by modifying parameters that change processing temperature from the standard processing temperature. …